FL Eng Scatalogo 1 1 0 CARS PDF

HPX Cod.
1512
DESCRIPTION
HPX is the lubricant with semi-synthetic base that ensures first-rate performance on cars with a high mileage.
Its formula has the new SAE 20W-super50 viscosity grade and has obtained the certification of major international
manufacturers (VW 501.00-505.00 and MB 229.1).
With its formulation, HPX regenerates the engine enhancing performance and it is the ideal oil for cars being prepared
for compulsory MOT testing.
CHARACTERISTICS
The innovative viscosity grade of HPX is called 20W-
super 50 because within the reference viscosity range of
20W-50 it has a level of kinematic viscosity (21)
characteristic of oils with exceptional viscosity (the next
grade 20W-60 has a range of between 21.9 and 26.1).
Due to its engine reconditioning function- HPX is the
ideal oil for cars being prepared for compulsory testing.
Indeed it limits exhaust gas emissions- ensuring
stability at high temperatures- limited evaporation and it
also regenerates the engine.
Its international specifications API SJ/CF and ACEA
A3/B2 prove the highest level of stability at high
temperatures and cleansing properties.
ADVICE ON USE
According to the manufacturer's instructions.
TECHNICAL DATA
SAE 20W-50, ACEA A3/B2, API SJ/CF,
MB-Approval 229.1, VW 501.00-505.00
SELENIA 20K Cod. 1072
DESCRIPTION
Synthetic based "energy saving" engine oil, for new generation petrol engines. It guarantees maximum protection for
the engines of naturally aspirated, turbocharged or multi-valve cars, allowing the oil change to be every 20,000 km.
CHARACTERISTICS
SELENIA 20K is the new concept lubricant that offers
all the distinctive characteristics of the oils in the
SELENIA range, in particular the lengthening of the oil
change interval.
Its innovative formulation ensures:
● Easy cold starting in rigid climatic conditions (up

to -25°C);
● Reduced oil consumption;
● Cools and lubricates turbo-chargers;
● Maximum performance in all kinds of driving
conditions.
All these qualitative aspects ensure the highest level of

protection, and therefore enable the oil change interval
to be extended up to 20,000 km.
Since it meets and exceeds the quality requirements of
the major Manufacturers, SELENIA 20K can be used in
all petrol engines of every make and capacity.
ADVICE ON USE
Oil changes should be made in accordance with the
advised period by Fiat, up to 20,000 km on cars with
naturally aspirated, turbocharged, or multi-valve engines.
RECOMMENDED BY
Fiat, Lancia.
TECHNICAL DATA
SAE 10W-40, ACEA A3, API SL/CF,
FIAT 9.55535-G2 CONTRACTUAL TECHNICAL REFERENCE N.F405.N04,
VW 500.00 - 505.00, MB-Approval 229.1
SELENIA 20K FOR ALFA ROMEO Cod. 1640
DESCRIPTION
Synthetic based lubricant developed for new generation ALFA ROMEO petrol engines. It guarantees the maximum
protection of naturally aspirated, turbo-charged or multi-valve petrol engines, extending the oil change interval up to
every 20,000 km.
CHARACTERISTICS
SELENIA 20 K FOR ALFA ROMEO was developed from
the experiences of Alfa Romeo and Selenia, and is
dedicated for high performance engines that require
extra protection, in particular, the lengthening of the oil
change intervals.
Its formulation ensures:
l Easy cold starting in rigid climatic conditions (up

to -25°C);
l Reduced oil consumption;
l Cools and lubricates turbo-chargers;
l Maximum stability at high temperatures;
Since it meets and exceeds the quality requirements of

the major Manufacturers, SELENIA 20K FOR ALFA
ROMEO can be used in all petrol engines of every make
and capacity.
ADVICE ON USE
Oil changes should be made in accordance with the
advised period by Fiat, up to 20,000 km on cars with
naturally aspirated, turbocharged, or multi-valve engines.
RECOMMENDED BY
Alfa Romeo.
TECHNICAL DATA
SAE 10W-40, ACEA A3, API SL/CF,
FIAT 9.55535-G2 APPROVAL N°F405.A05,
VW 500.00 - 505.00, CCMC G5
SELENIA ABARTH 10W50 Cod. 1313
DESCRIPTION
Selenia Abarth 10W-50 is a fully synthetic "preparazione" lubricant that warrants the utmost performance for engines
with high specific power.Selenia Abarth 10W-50 is the lubricant formulated for all Abarth cars fitted with the Tuning Kit
that increases the engine performance.
The Abarth relationship is a testimony to the supremacy of Selenia products.
CHARACTERISTICS
Selenia Abarth 10w-50 is able of meeting the higher
performance requirements of the engine.
● It ensures very high stability at high

temperatures.
● It prevents fouling of the turbine optimising engine
performance level.
● High stability to oxidation.
● Maximum grip of the lubricating film.
ADVICE ON USE
As per OEM owner manual
RECOMMENDED BY
Abarth
TECHNICAL DATA
SAE 10W-50, APPROVAL ABARTH N°0101
SELENIA ABARTH 5W40 Cod. 1390
DESCRIPTION
Fully synthetic lubricant formulated for high-performance engines fitted with MultiAir System. Its high cleansing and
dispering power improved running cold and extreme viscosimetric stability enable the highest levels of performance
and protection throughout the interval between changes.
The Abarth relationship is a testimony to the supremacy of Selenia products.
CHARACTERISTICS
Selenia Abarth 5W-40 is the fully synthetic lubricants for
engines fitted with MultiAir system.
It is able of meeting the higher performance
requirements of the engine.
● It ensures high stability at high temperatures

● Specific Pour point
● Excellent wear protection for engines with high
power performance
● High friction reduction among mechanical
components
● Greater engine performance
ADVICE ON USE
RECOMMENDED BY
Abarth
TECHNICAL DATA
APPROVAL ABARTH N°0102.
SELENIA DIGITEK PURE ENERGY Cod. 1389
DESCRIPTION
Selenia Digitek Pure Energy is the new fully synthetic lubricant formulated for modern petrol engines.
Its particular viscosity grade and its specific formulation are able to increase the fuel economy characteristics and,
consequently, the reduction of CO2 produced.
Specific formulation for the TwinAir two-cylinder engines, Selenia Digitech Pure Energy allows maximum protection of
the engine even under high mechanical stress caused by severe stop and go conditions of city traffic.
CHARACTERISTICS
The new petrol engines are able to combine excellent
performance, low fuel consumption, handling and low
noise thanks to the adoption of innovative technical
solutions such as electro-hydraulic valves.
Selenia Digitek Pure Energy can offer considerable
advantages and is the only lubricant specially
formulated for new TwinAir engine.
● Selenia DigiteK Pure Energy maximizes fuel

economy
● Total engine protection also at high temperatures
● It enhances the sporty character in turbocharged
versions.
● Very high thermal stability
● This lubricant ensures compliance with anti
pollution regulations
ADVICE ON USE
RECOMMENDED BY
Fiat
TECHNICAL DATA
SAE 0W-30, ACEA C2,
FIAT 9.55535-GS1 CONTRACTUAL TECHNICAL REFERENCE N°F020.B12
SELENIA GOLD SYNTH Cod. 1201
DESCRIPTION
A synthetic based engine oil for normally aspirated, turbocharged and multivalve petrol or diesel engines. The special
formula guarantees improved cold starting, reduced fuel consumption and excellent engine protection.
[sold only in EXPORT markets]
CHARACTERISTICS
Selenia Gold is a high quality lubricant, which
guarantees the highest protection and performances of
all engines. Its formula, tested to satisfy the needs of
the latest types of engines, presents high technical
features:
l engine protection to cold starting and in extreme

weather conditions
l stability at high temperatures, thanks to the
fluidity of the protection film, resistant also to
extreme operating conditions
l anti-wear protection
l fuel economy efficiency
Selenia Gold can be used both for petrol and diesel

engines of any make and power rating, ideal to satisfy
the quality requirements of major car-makers.
ADVICE ON USE
Use according to manufacturer's instructions.
TECHNICAL DATA
SAE 10W-40, ACEA A3/B3/B4, API SM/CF,
MB-Approval 229.1, VW 501.01-505.00
SELENIA K Cod. 1142
DESCRIPTION
Synthetic lubricant ideal for the most modern petrol engines. Owing to its unique formula, it warrants high resistance
to oxidisation, the utmost protection in "stop & go" driving and outstanding perfomance whatever the weather.
CHARACTERISTICS
Selenia K is the synthetic lubricant with innovative
technology that warrants optimal cold starting and
maximum protection also in urban driving. In "stop & go"
driving, a standard lubricant suffers an accelerated
stress, with the creation of sludges and consequent
performance's reduction. Owing to its special
additivation, based on dispersant molecules, Selenia K
avoids sludges'creation. Its tecnologically advanced
formula permits to obtain:
l the most actual international omologation API

SM that guarantees maximal resistance to
oxidation, extreme protection against deposits,
optimal perfomances at low temperatures
l the exclusive omologation Fiat 9.55535-M2/BZ,
for nwe EURO IV Fiat group FIRE engines,
thanks to its 5W-40 viscosimetric range with
relevant Fuel Economy features.
ADVICE ON USE
As per OEM owner manual.
RECOMMENDED BY
Fiat, Lancia
TECHNICAL DATA
SAE 5W-40, ACEA A3/B3, API SM,
FIAT 9.55535-M2 CONTRACTUAL TECHNICAL REFERENCE N°F214.I05,
VW 505.00, VW 502.00, MB-Approval 229.3
SELENIA K P.E. Cod. 1411
DESCRIPTION
Selenia K Pure Energy is the new fully synthetic lubricant for new petrol engines.
With its low ash content it passes the new ACEA C3 specification and offers total protection of the catalyst, thereby
lengthening its life cycle.
CHARACTERISTICS
The new petrol engines can combine fuel saving, low
emissions, ease of handling and top performance
thanks to the adoption of innovative technical solutions
such as direct injection and the turbine with variable
geometry. The new petrol power units can thus offer
considerable advantages in terms of reducing pollution
ensuring excellent handling features and noiselessness.
l Selenia K Pure Energy is the lubricant especially

formulated to maximise fuel economy, warrant
compliance with anti-pollution regulations, protect
engines created to operate at ever higher
temperatures and enhance the typically sporty
character in turbocharged versions.
l Painstaking study has led to the definition of
Selenia K Pure Energy where particular additives
warrant very high thermal stability that sets this
product apart from all its predecessors. This
feature, combined with very low cold viscosity
and a low friction coefficient make Selenia K
Pure Energy the best product with which to
achieve top engine performance ensuring full
enjoyment and protection of it.
ADVICE ON USE
RECOMMENDED BY
Fiat - Lancia
TECHNICAL DATA
SAE 5W-40, ACEA C3, API SM/CF,
FIAT 9.55535-S2 CONTRACTUAL TECHNICAL REFERENCE N°F603.C07,
MB-Approval 229.51, VW 502.00-505.00, VW 505.01,
BMW LL-04
SELENIA MULTIPOWER Cod. 1046
DESCRIPTION
Synthetic-based lubricant for petrol engines, warrants the utmost fuel saving and top quality performance, also under
the toughest operating conditions and in all weather. Owing to the innovative "multipower" formula, which preserves
the after-treatment system lengthening the average life of the catalyst, it is ideal for enhancing the performance of
alternative engines (methane and lpg).
CHARACTERISTICS
SELENIA MULTIPOWER exceeds the highest
international specifications (API SL and ACEA A1/A5)
and important car-makers omologations (FIAT 9.55535-
G1 and GM-LL-A 025), thanks to its high fuel economy
characteristics. The new formula makes SELENIA
MULTIPOWER ideal in extremely rigid climatic
conditions. It preserves the exaust emissions after-
treatment system and permitting a 10% petrol saving
compared to a 5W-30 standard product, it grants a
longer life to the caralyst.
ADVICE ON USE
20,000 km on aspirated, turbo charged or multi-valve
engines.
RECOMMENDED BY
Fiat, Lancia, Alfa Romeo and for no standard engines
(methane and lpg).
TECHNICAL DATA
SAE 5W-30, ACEA A1/A5, API SL,
FIAT 9.55535-G1 CONTRACTUAL TECHNICAL
REFERENCE N°F315.B04,
GM-LL-A-025
SELENIA MULTIPOWER C3 Cod. 1157
DESCRIPTION
High performance synthetic lubricant formulated for petrol and diesel engines that require products capable of
minimising ash deposits (sulphate ashes, phosphorus and sulphur).
Its specific formula meets the specifications of BMW and Mercedes Benz for latest generation diesel and petrol cars.
CHARACTERISTICS
It warrants the utmost efficiency of the particulate filter
of fuel oil engines, preventing it from clogging.
● It lengthens the life of catalysts on petrol

engines.
● Fuel economy properties
● Protection against wear
● It meets the new requirements of ACEA C3
specification
TECHNICAL DATA
SAE 5W-30, ACEA C3, API SM/CF, BMW LL-04,
MB-Approval 229.51, VW 502.00, VW 505.00,
VW 505.01,
FIAT 9.55535-S3 CONTRACTUAL TECHNICAL
REFERENCE N°F129.F11,
MS-11106
SELENIA MULTIPOWER GAS 5W40 Cod. 1416
DESCRIPTION
Selenia Multipower Gas is a fully synthetic lubricant designed for petrol engines, also turbocharged, powered with
methane or LPG. Its exclusive formulation improves valve protection against wear, neutralises the acid compunds
formed by the combustion and keeps engine performance level.
CHARACTERISTICS
Selenia Multipower Gas has a special formula that,
contributes to obtain, through the blow-by fumes, the
best characteristics of adhesiveness, antiwear and
cleansing at the interface between valve and valve seat.
The elevated starting value of the TBN contribute to
neutralize the oil acidity, avoiding the chemical
aggression of the parts during the whole drain interval.
● Fully synthetic lubricant

● Resistance to wear for the tappets (new special
additive)
● Low viscosity in order to improve the cold start
● Fuel economy
● Greater protection for modern TWC
● In force also for Euro 5 engine
● Maximum International specifications
ADVICE ON USE
RECOMMENDED BY
Fiat - Lancia - Alfa Romeo
TECHNICAL DATA
SAE 5W-40,
FIAT 9.55535-T2 CONTRACTUAL TECHNICAL REFERENCE N°F922.E09,
ACEA A3/B4 C3, API SM
SELENIA MULTIPOWER SPECS Cod. 1156
DESCRIPTION
Synthetic lubricant specifically for petrol and diesel engines of the Volkswagen group that require engine oils with low
ash content (LOW SAPS). Studied especially for the new engines fitted with particulate filter.
CHARACTERISTICS
It warrants the utmost efficiency of the particulate filter
of fuel oil engines, preventing it from clogging.
● It lengthens the life of catalysts on petrol

engines.
● Fuel economy properties
● Protection against wear
● It meets the new requirements of ACEA C3
specification
TECHNICAL DATA
SAE 5W-30, ACEA C3, ACEA A3/B4, VW 504.00-
507.00
SELENIA PERFORMER 5W-40 Cod. 1162
DESCRIPTION
Synthetic-based oil with a viscosity index that warrants the utmost protection of the engine in the most varied weather
conditions, even with decided changes in the temperature.
Owing to its international specifications and the certification of major manufacturers, SELENIA PERFORMER 5W-40
is the ideal lubricant for the requirements of modern petrol and diesel engines.
CHARACTERISTICS
SELENIA PERFORMER 5W-40 exceeds the latest API
SL international specification and its duality is certified
by ACEA A3/B3 specifications.
Because of its 5W-40 viscosity index and its specific
formulation, it has obtained the important certification of
international manufacturers, such as VW505.01 and MB
229.1
ADVICE ON USE
Follow the manufacturer's instructions.
TECHNICAL DATA
SAE 5W-40, ACEA A3/B3, API SL/CF,
VW 500.00-505.00-505.01, MB-Approval 229.1
SELENIA RACING Cod. 1047
DESCRIPTION
This lubricant has been developed from experience, accumulated over the years, of the Selenia racing team on
important international circuits.
SELENIA RACING is the product thought to be especially suitable for sports use in Turismo cars on the track or the
road (Rally).
CHARACTERISTICS
The use of SELENIA RACING in competitions has
demonstrated its resistance to thermal stress, which is
an advanced technical requirement of the Turismo cars.
The product has allowed:
● Maximum power distribution;

● Maximum constancy of the pressure in the
lubricating circuit in all working conditions;
● Excellent viscosity at highest temperatures.
As it meets and exceeds the quality requirements of the

major Manufacturers, SELENIA RACING can be used in
all naturally aspirated, turbo-charged or multi-valve
engines of any make and capacity.
ADVICE ON USE
5,000 km for competition use.
Up to 20,000 km on aspirated cars (also JTS)and up to
10,000 km on cars with turbo-charged engines.
RECOMMENDED BY
Alfa Romeo and Maserati.
SELENIA RACING has won in the following circuits:

Monza, Imola, Vallelunga, Zolder, Nürburgring, Silverstone, Brands Hatch, Oulton Park, Jarama, Jerez, Barcelona.
TECHNICAL DATA
SAE 10W-60,
FIAT 9.55535-H3 CONTRACTUAL TECHNICAL REFERENCE N°F007.A00
SELENIA SPORT Cod. 1192
DESCRIPTION
Lubricant created to warrant outstanding performances also with sporty driving and under conditions when the engine
is exploited in full. Selenia Sport protects the engine up to high temperatures and it is the ideal oil to obtain safety and
the best result.
CHARACTERISTICS
Selenia Sport is the lubricant created out of FL's
experience and technology in competitions.
Its special formula is ideal for supporting the engine
during races and for optimising sporty driving with the
maximum interval between changes of 10,000 km. It is
in this interval that the product ensures maximised
performance and extreme results.
The specific synthetic bases of Selenia Sport 10W-60
maintain high viscosimetric stability even in the
presence of heavy load stresses and they ensure that
the fluid meatus of the lubricant also lasts when the
product viscosity is reduced by the strong dilution of
petrol, exactly as happens in competitive events.
Selenia Sport 10W-60 ensures low volatility also in high
temperature conditions. This heat resistance is backed
by outstanding antioxidant and antiwear properties.
Born in the field of competitions, Selenia Sport 10W-60

meets the requirements of engines and drivers to
achieve the best results.
ADVICE ON USE
Interval between changes every 10,000 km.
TECHNICAL DATA
SAE 10W-60
SELENIA SPORT 5W40 Cod. 1414
DESCRIPTION
Selenia Sport 5W-40 is a fyully synthetic lubricant capable of meeting the needs of high performance engines.
Studied to protect the engine also in high thermal stress conditions, it prevents deposits on the turbine to achieve the
utmost performance in total safety.
CHARACTERISTICS
Selenia Sport 5W-40 allows maimum power distribution
● reduction of fuel consumption

● maximum cleaning of the engine
● Selenia Sport 5W-40 is the ideal lubricant for the
new twin stage engines.
ADVICE ON USE
Replacement as indicated by the Manufacturer
RECOMMENDED BY
Alfa Romeo, Lancia
TECHNICAL DATA
SAE 5W-40, ACEA A3/B3/B4,
FIAT 9.55535-Z2 CONTRACTUAL TECHNICAL
REFERENCE N°F716.B08
SELENIA SPORT POWER 5W40 Cod. 1636
DESCRIPTION
Selenia Sport Power %W-40 ia a fully synthetic lubricant especially designed to enhance the sporting characteristics
of direct injection petrol engines(GDI).
CHARACTERISTICS
Selenia Sport Power %w-40 maximizes sporting
performances while maintaining complete engine
protection, even under the most severe conditions of
use.
l It allows maximum power distribution

l Maximum cleaning of the engine
l Extended long drain interval
ADVICE ON USE
RECOMMENDED BY
Alfa Romeo - Lancia
TECHNICAL DATA
SAE 5W-40, ACEA C3 Performance,
FIAT 9.55535-GH2 CONTRACTUAL TECHNICAL
REFERENCE N° F052.H12
SELENIA SPORT PURE RACE Cod. 1082
DESCRIPTION
Specific lubricant for competitions, ensures maximum power, immediately available, to obtain better pickup during
acceleration at the start of the race, high protection against wear and resistance to extreme outside pressures.
Exclusively for competition use.
CHARACTERISTICS
The technical features of the Selenia Sport Pure Race
ensure higher power.
The innovative L.F.I. additive (Low Friction Improver)
reduces the friction coefficient by 80% compared with a
normal competition lubricant ensuring increased engine
efficiency and increased power up to 4 extra HP.
The low viscosity and specific additives make it possible
to obtain immediate power delivery, owing to the low 1st
release coefficient.
Resistance to high loads is very high, also in harsh
applications like competitions, keeping the fluid meatus
intact.
The use of non conventional synthetic components
confers:
● the almost total lack of evaporation in high

temperature conditions
● stability to oxidisation
● maximum grip of the lubricating film
● high viscosimetric stability
ADVICE ON USE
Exclusively for competition use.
TECHNICAL DATA
SAE 5W-20
SELENIA StAR Cod. 1138
DESCRIPTION
HIGH PERFORMANCE lubricant designed to protect the engine also under the conditions of high termal stress
generated by a sporty driving style. Its unique formula maximises the features of engines with a high specific power,
improves cold starting and keeps viscosity constant throughout the interval between changes.
CHARACTERISTICS
Selenia StAR grants maximum performnces to Alfa
Romeo JTS Direct Injection engines of new generation
and to all high specific power engines. Its special anti-
wear additiv, developed by FL's experience with Alfa
Romeo in competitions, maximizes protection even with
thin lubricant film. Thanks to E.S.T. (Extremely Stable
Technology) formula, Selenia StAR exceeds Fiat
9.55535-H2 omologation,created for lubricants that grant
maximum performance and specific high temperature
viscosity.This unique formula presents extreme shear
stability and maintains stable viscosity level, offering
maximal protection to high specific power engines.
Selenia StAR exceeds new international API SM
specification that grants:
l maximum oxidation resistance

l extreme protection from deposits
l high performances at high temperatures.
ADVICE ON USE
As per OEM Owner Manual.
RECOMMENDED BY
Alfa Romeo
TECHNICAL DATA
SAE 5W-40, ACEA A3/B3, API SM,
FIAT 9.55535-H2 CONTRACTUAL TECHNICAL REFERENCE N°F216.D05
SELENIA STAR PURE ENERGY Cod. 1413
DESCRIPTION
Selenia StAR Pure Energy is the new fully synthetic lubricant for new Alfa Romeo petrol engines.
With its low ash content it passes the new ACEA C3 specification and offers total protection of the catalyst, thereby
lengthening its life cycle.
CHARACTERISTICS
Its unique formula maximises the features of engines
with a high specific power, improves cold starting and
keeps viscosity constant throughout the interval
between changes.
The new Alfa Romeo petrol engines can combine fuel
saving, low emissions, ease of handling and top
performance thanks to the adoption of innovative
technical solutions such as direct injection and the
turbine with variable geometry. The new petrol power
units can thus offer considerable advantages in terms of
reducing pollution ensuring excellent handling features
and noiselessness.
l Selenia StAR Pure Energy is the lubricant

especially formulated to maximise fuel economy,
warrant compliance with anti-pollution
regulations, protect engines created to operate at
ever higher temperatures and enhance the
typically sporty character in turbocharged
versions.
l This unique formula presents extreme shear
stability and maintains stable viscosity level,
offering maximal protection to high specific power
engines.
l High performances at high temperatures
ADVICE ON USE
RECOMMENDED BY
Alfa Romeo
TECHNICAL DATA
SAE 5W-40, API SM/CF, ACEA C3,
FIAT 9.55535-S2 CONTRACTUAL TECHNICAL REFERENCE N°F603.D08
SELENIA TURBO DIESEL 10W-40 Cod. 1091
DESCRIPTION
Synthetic based motor oil for diesel cars equipped turbo-charged or multi-valve indirect or direct injection engines.
Also ideal for aspirated diesel cars.
SELENIA TURBO DIESEL is specifically formulated to prevent the thickening caused by the carbon residues of
combustion products, common in indirect injection engines with pre-combustion chambers.
CHARACTERISTICS
SELENIA TURBO DIESEL offers all the distinctive
characteristics of the oils in the Selenia range, which
include: lower oil consumption, cleaner engines and
maximum stability at high temperatures. It also
guarantees:
l Improved cold starting as a result of the high

fluidity;
l Excellent resistance to high temperatures;
l Optimal dispersion of engine protection additives.
In the turbo charged engines, it eliminates the risk of

piston rings sticking and the consequent engine seizing,
due to the combined effect of high temperature and
pressure.
ADVICE ON USE
Changes should be as indicated by Fiat.
Oil changes are advised up to 20,000 km on cars with
direct injection engines and up to 10,000 km on cars
with indirect injection engines.
RECOMMENDED BY
Fiat, Lancia, Alfa Romeo, Innocenti.
TECHNICAL DATA
SAE 10W-40, ACEA B3, API CF/SG, CCMC PD2,
FIAT 9.55535-D2 CONTRACTUAL TECHNICAL
REFERENCE N°F009.B99,
VW 505.00, MIL-L-2104 D Performance
SELENIA WR 5W-40 Cod. 1092
DESCRIPTION
Highly selected synthetic based oil for direct injection engines, both aspirated and turbo-charged. It is developed to
respond to all requirements of the latest generation diesel engines (common-rail), where the revolutions per minute
and the specific power of the engine are enhanced. As a result of the particular additives, it also ensures complete
protection of the engine. Recommanded by Fiat / Lancia / Alfa Romeo for Multijet engines.
CHARACTERISTICS
SELENIA WR is formulated with a correct balance of
the detergent additives and dispersants that help to
reduce and control the formation of deposits,
combustion residue and carbon deposits guaranteeing
the optimal operation of the engine.
l The advanced viscosity grade 5W-40 ensures the

use of the product in more extreme
temperatures:
SAE 5W allows excellent lubrication and engine
start up to -30°C;
SAE 40 guarantees the lubrication film with
external temperatures up to +40°C.
l Minor fuel consumption and reduced emissions
l Thermal stability preventing oxidation;
l Wear reduction;
l Special formula "air release" to grant idraulic
tappets control;
l Particularly suited to JTD or common rail engines
where the revolutions per minute and the specific
power of the engines are enhanced.
ADVICE ON USE
Replacement should be as indicated by Fiat.
RECOMMENDED BY
Fiat, Lancia, Alfa Romeo for Multijet engines and cold climates.
TECHNICAL DATA
SAE 5W-40, ACEA B3/B4, API CF,
FIAT 9.55535-N2 CONTRACTUAL TECHNICAL REFERENCE N°F515.D06,
MB-Approval 229.3, VW 505.00, VW 502.00,
GM-LL-B-025
SELENIA WR FORWARD Cod. 1388
DESCRIPTION
Selenia WR Forward is the new fully synthetic especially formulated for diesel engines already compliant with new
Euro 6 standards.
Its particular viscosity grade permits to increase the fuel economy characteristics and consequently the reduction of
CO2 produced.
CHARACTERISTICS
The new diesel engines are able to combine excellent
performance, low fuel consumption, handling and meet
the new European emission level.
l Selenia Wr Forward maximizes fuel economy

l Very high thermal stability
l Total engine protection
l It ensures compliance with anti pollution
regulations
ADVICE ON USE
RECOMMENDED BY
Fiat Lancia Alfa Romeo
TECHNICAL DATA
SAE 0W-30, ACEA C2,
FIAT 9.55535-DS1 CONTRACTUAL TECHNICAL
REFERENCE N°F842.F13
SELENIA WR P.E. Cod. 1412
DESCRIPTION
Selenia WR Pure Energy is a newly conceived fully synthetic lubricant capable of answering the needs of the most
modern diesel engines. Passing the ACEA C2 specification certifies the low ash content, which is an indispensable
characteristic to protect the particulate filter from residual combustion products that could cause dangerous clogging
of the filter itself.
CHARACTERISTICS
Selenia WR Pure Energy 5W-30 is the first product with
High Fuel Economy System, a special formulation that
allows considerable fuel saving compared with products
of the same viscosimetric rating.
l It increases protection on the mostly stressed

parts of the engine; in particular Selenia WR
Pure Energy greatly reduces the danger of
turbine soiling, which is the main cause of falling
performance and, in prolonged cases, of
breakages.
l Selenia WR Pure Energy is therefore a lubricant
with very high performance that can combine
respect for the environment with its low ash
content and protection of increasingly high
performance diesel engines.
ADVICE ON USE
As per OEM owner manual.
RECOMMENDED BY
Fiat, Lancia, Alfa Romeo
TECHNICAL DATA
SAE 5W-30, ACEA C2,
FIAT 9.55535-S1 CONTRACTUAL TECHNICAL REFERENCE N°F510.D07
VISION 15W40 Cod. 1366
DESCRIPTION
VISION is formulated forproviding maximum performance that is demanded for today's lubricants for diesel and petrol
cars.
This motor oil responds to demands from the modern engines and is suitable for all engines, especially turbo-charged
engines subjected to high levels of mechanical and temperature stress.
CHARACTERISTICS
VISION represents the evolution of lubricant technology,
using additives with a particular molecular composition,
ensures high thermal, oxidation and mechanical
stability.
Thanks to the presence of a balanced viscosity
stabilizer, VISION guarantees optimal lubricating film
capacity in critical conditions of mechanical and thermal
stress, responding to the cutting action that occurs in
the mechanical parts of the engine when accelerating
(camshaft/tappets, cylinder pipe/links, engine
bearings/shaft), also from the thermal-oxidation action
caused by high working temperatures.
This results in exceptional protection in terms of wear of
the engine and minor deterioration of the lubricant.
At the same time, its detergent and dispersant
characteristics guarantee the perfect engine cleaning
from the harmful effects of the combustion of diesel oil,
avoiding the formation of lacquer and soot on the parts
the engine (pistons and lubrication pipe) that would
provoke poor overall operation. The qualities of VISION
allow excellent cold starts, a good engine performance
in all working temperatures and lengthening of the
average life all working conditions.
ADVICE ON USE
Advised changes are up to 15,000 km for petrol engines (aspirated and turbo) and up to 7,500 km for diesel engines
(aspirated and turbo).
TECHNICAL DATA
SAE 15W-40, API SJ/CF, ACEA A2/B3,
MB 229.1 Performance,
VW 501.01-505.00 Performance
VISION 15W50 Cod. 1367
DESCRIPTION
VISION 15W50 is the new lubricant for petrol and diesel engines.
Due to its technical features it protects and cleans the engine under all conditions of use.
Its specific viscosity grade, SAE 15W-50, has been designed to meet the needs of engines with high specific power
that run at high temperatures, for a lubricant suited to these stresses.
CHARACTERISTICS
Owing to the polymer in its formula, VISION 15W50
warrants a high degree of engine protection against
thermal stress, above a standard 15W-40 lubricant,
revealing a maximum viscosity loss percentage to
mechanical shearing of 3% (from 10 to 12% for a
standard 15W-40 oil).
The latest ACEA A3/B3-2002 specification ensures

outstanding performance levels also with prolonged oil
changing intervals and harsh operating conditions with
high sludge formation control at high and low
temperatures. It prevents sticking of the compression
rings and thickening of the product and it extends the
life of the engine.
It has passed the tests of the API SJ/CF specification
and has obtained the certification of Volkswagen
501.00-505.00 and Mercedes Benz 229.1.
ADVICE ON USE
According to the manufacturer's instructions.
TECHNICAL DATA
SAE 15W-50, ACEA A3/B3, API SJ/CF,
MB 229.1 Performance, VW 501.00-505.00
TUTELA CS SPEED Cod. 1508
DESCRIPTION
Specific totally synthetic lubricant for the hydraulic system of Fiat Group automated transmision: DUALOGIC,
SELESPEED, D.F.N.- SELECTRONIC.
CHARACTERISTICS
l Special formulation has been developed

specifically for the optimum operation, in all the
climatic conditions, of the Selespeed gearboxes.
l Particular additivation raises the characteristics
of extreme fluidity when cold, increased
protection to heat and high thermal stress.
l Use of particular detergent and dispersant
additives allows you to maintain the cleanliness
of the sophisticated organs of the hydraulic
system.
RECOMMENDED BY
Fiat Group Automobiles
TECHNICAL DATA
FIAT 9.55550-SA1 CONTRACTUAL TECHNICAL REF.

N°F005.F98
TUTELA GI/R Cod. 1442
DESCRIPTION
Synthetic based lubricant specifically for hydraulic and electrohydraulic systems fitted on automated transmissions.
CHARACTERISTICS
l Excellent low temperature performances.
ADVICE ON USE
Drain intervals according manufacturer indications.
RECOMMENDED BY
Fiat Group Automobiles, Iveco.
TECHNICAL DATA
ISO VG 22,
FIAT 9.55550-AG3 CONTRACTUAL TECHNICAL REF.
N°F428.H04,
ZF TE-ML 02K,
IVECO 18-1807 CLASSE APU,CONTRACTUAL
TECHNICAL REF. N°I428.I07,
MS-11655, MB 345.0 Performance, MAN M3289
TUTELA TRANSMISSION AS8 Cod. 2315
DESCRIPTION
Last generation automatic transmissions fluid, fully synthetic, suitable for automatic with 8 and 9 speed ZF
gearboxes.
CHARACTERISTICS
l The high technology formulation maximizes

FUEL ECONOMY properties according to new
standards for fuel consumption and emissions.
ADVICE ON USE
Drain intervals according the manufacturer indications.
RECOMMENDED BY
Fiat Group Automobiles, Chrysler group
TECHNICAL DATA
ZF TE-ML 11,
FIAT 9.55550-AV5 CONTRACTUAL TECHNICAL
REFERENCE N°F139.I11
TUTELA TRANSMISSION CVT N.G. Cod. 1478
DESCRIPTION
Synthetic based oil for vehicles with continuously variable automatic gearboxes.
CHARACTERISTICS
l Fully synthetic formulation, optimal transmission

operation in all climatic conditions (from -40°C to
+50°C).
l Special anti-wear additives for more durable
mechanical components.
l High viscosity index in order to guarantee an
optimal system lubrication at any operating
temperature.
l Specific anti-slipping characteristics for an
improved noise-free exploitation of the
transmission.
l Excellent anti-oxidant characteristics for longer
lubricant life.
TUTELA CVT NG exceeds the quality requirements of

the major Manufactures of continuously variable
transmissions and therefore can be used in cars of
every make, type and power with CVT transmissions.
ADVICE ON USE
Replacement should be as indicated by the Manufacturer, however once a year.
RECOMMENDED BY
TECHNICAL DATA
SAE 75W-80
TUTELA TRANSMISSION EPYX Cod. 1476
DESCRIPTION
Specific multi-grade lubricant for manual gearboxes and differential with hypoid gears of all the types of motor vehicles
where lubricant with Extreme Pressure (E.P.) characteristics is demanded.
CHARACTERISTICS
● Developed specifically to adapt itself to various

operating conditions and environments.
● Specific formulation ensures the correct balance
between gear protection and gear changes in
every season of the year.
● An opportune balanced additive, at the same
time, ensures good compatibility with the metals,
alloys, seals inside the transmission and an
optimal heat dispersion.
● The aim of the viscosity is that it protects the
gears in every condition of lubrication and every
revs.
● Its particular viscosity to warmth guarantees the
reduction of mechanical noisiness of the gears in
high temperatures.
In consideration of the high quality of the product,

TUTELA CAR EPYX can be used in the manual
gearboxes of all automobiles.
ADVICE ON USE
Thanks to its specific viscosity TUTELA CAR EPYX can
be used in every season of the year.
TECHNICAL DATA
SAE 80W-90, API GL 4 PLUS
TUTELA TRANSMISSION EXPERYA Cod. 1462
DESCRIPTION
Lubricant for manual transmissions which ensures improved gearbox operating features and high performance in all
weather conditions.
CHARACTERISTICS
Its particular additive formula protects against wear,
sludges and deposits extending the life of the
transmission.
l High fluidity at low temperatures.
RECOMMENDED BY
Fiat, Lancia
TECHNICAL DATA
SAE 75W, API GL 4,
FIAT 9.55550-MZ2 CONTRACTUAL TECHNICAL REF.
F002.F13
TUTELA T. FORCE4 Cod. 2296
DESCRIPTION
Specific technology lubricant for Chrysler Group automatic transmissions.
CHARACTERISTICS
● Optimal speed shift

● Better resistance to oxidation
● Exceptional mechanical shear stability
● Extended oil drain intervals
● better wear protection
● better behavior at low temperatures
ADVICE ON USE
Replacement intervals as indicated by manufacturer
RECOMMENDED BY
Fiat Group Automobiles, Chrysler Group
TUTELA TRANSMISSION GEARFORCE Cod. 1402
DESCRIPTION
Fully synthetic fluid for last generation traditional mechanical and new dual clutch transmissions.
CHARACTERISTICS
Expressly dedicated to the FGA transmission C635 MT
& C 633 DDCT. Tutela Transmission GEARFORCE has:
l Excellent performance and maneuverability at low

temperatures
l The superior viscosimetric stability keeps
performance unchanged over time
l Maximum protection of mechanical components.
ADVICE ON USE
RECOMMENDED BY
TECHNICAL DATA
SAE 75W,
FIAT 9.55550-MZ6 CONTRACTUAL TECHNICAL REFERENCE N°F002.F10,
API GL 4
TUTELA TRANSMISSION GEARTECH Cod. 1438
DESCRIPTION
Synthetic lubricant for manual transmission groups, with anti wear and fuel economy features, very good synchronizer
performance, superhigh termal stability. Perferct transmission group cleanness
CHARACTERISTICS
● Excellent cold flow properties

● Excellent synchronizer performance and
maintained frictional properties during lifetime
● High shear stability
● Excellent thermal and oxidative stability
● Wear protection
ADVICE ON USE
RECOMMENDED BY
TECHNICAL DATA
SAE 75W-85, API GL 4, FIAT 9.55550 C.T.REF. N°
F704.C08
TUTELA TRANSMISSION GI/A Cod. 1500
DESCRIPTION
Oil for automatic gearshift and power steering of cars, and light commercial vehicles, industrial vehicles and for all
hydraulic drives.
CHARACTERISTICS
l Optimal fluency when cold in order to reduce

power absorption and improve transmission
performance.
l Optimal anti-foaming properties in order to
guarantee the maximum lubrication performance
and optimum heat exchange.
l Excellent anti-oxidant characteristics for
improved lubricant endurance.
l High viscosity index in order to optimise the
response of the servo-controls in every operating
temperature condition.
l Excellent anti-wear properties to improve the
durability of the mechanical components.
TUTELA GI/A exceeds the strict quality requirements of

the major European Manufacturers and can be used in
machinery of every make, type and power rating.
ADVICE ON USE
Drain intervals as indicatated by the manufacturers
RECOMMENDED BY
Fiat Group Automobiles, Iveco.
TECHNICAL DATA
ATF DEXRON II D,
IVECO 18-1807 CLASSE AG2,CONTRACTUAL TECHNICAL REF. N°I002.B92,
FIAT 9.55550-AG1 CONTRACTUAL TECHNICAL REF. N°F002.B92,
VOITH 55.6335.32 Performance, ZF TE-ML 04D,
ZF TE-ML 14A, MB 236.1 Performance,
MB 236.5 Performance,
MAN 339 TYPE Z1 and V1 Performance,
CAT TO-2 Performance
TUTELA TRANSMISSION GI/E Cod. 1505
DESCRIPTION
Fully synthetic lubricating oil for hydraulic automatic transmissions and power steering of cars. Ideal in harsh
climates.
CHARACTERISTICS
l Particular ATF additives raises the

characteristics of extreme fluidity in cold starting
and under high temperatures;
l Optimal detergent characteristics guarantee the
perfect cleaning of the mechanical parts;
l Excellent properties of heat removal in the
transmission components.
l Fully synthetic formulation to ensure excellent
thermal-oxidative resistance, therefore prolonging
the period between oil changes.
Tutela GI/E exceeds the quality requirements of the

major European Manufacturers and therefore can be
used in cars of every make, type and power rating.
ADVICE ON USE
Replacement intervals as indicated by manufacturer.
RECOMMENDED BY
TECHNICAL DATA
ATF DEXRON III,
FIAT 9.55550-AG2 CONTRACTUAL TECHNICAL REF. N°F001.C94,
IVECO 18-1807 CLASSE AG3/III,CONTRACTUAL TECHNICAL REF. N°I001.C06,
FORD MERCON (M- 011201), VOITH 55.6335.32,
ZF TE-ML 04D, ZF TE-ML 09, ZF TE-ML 14A,
ZF TE-ML 17C, MAN 339 TYPE Z2 and V2 Performance,
ALLISON C4 Performance,
MAN 339 TYPE Z1 and V1 Performance
TUTELA TRANSMISSION GI/V Cod. 1460
DESCRIPTION
Synthetic-based lubricant specifically for automatic 5-gear transmissions. Specific formulation to warrant perfect
lubrication also with controlled slip torque converter. Excellent viscosimetric stability. Specific for automatic new
generation Fiat 5 gear-transmissions.
CHARACTERISTICS
Maximum quality and efficiency in whatever weather
condition. Noise reduction. Tutela GI/V provides
excellent wear driveability. Owing to its specific wear
control additivation, it extends transmission life.
Important features:
l maximum viscosity stability

l protection against rusting and corrosion
l optimal polishing properties
l maximum compatibility with whatever material
l resistance to foaming
ADVICE ON USE
Drain intervals according to manufacturer indications
RECOMMENDED BY
TECHNICAL DATA
JWS 3309, TYPE T-IV,
FIAT 9.55550 CONTRACTUAL TECHNICAL REF. N°F333.I05
TUTELA TRANSMISSION GI/VI Cod. 1461
DESCRIPTION
Synthetic-based lubricant specifically for automatic 6-gear transmissions.Specific formulation to warrant fuel economy
characteristics. Ensures the utmost protection of the transmission components also in extreme temperatures.
Specific formula for new generation Fiat automatic 6 gear-transmission.
CHARACTERISTICS
Synthetic-based lubricant specifically for automatic 6-
gear transmissions. Specific formulation to warrant
perfect lubrication also with controlled slip torque
converter. Excellent viscosimetric stability.
Maximum quality and efficiency in whatever weather
condition. Noise reduction. Tutela GI/VI provides
excellent wear driveability. Owing to its specific wear
control additivation, it extends transmission life.
Important features:
l maximum viscosity stability

l protection against rusting and corrosion
l optimal polishing properties
l maximum compatibility with whatever material
l resistance to foaming
RECOMMENDED BY
TECHNICAL DATA
ATF AW-1,
FIAT 9.55550 CONTRACTUAL TECHNICAL REF. N°F336.G05
TUTELA TRANSMISSION MATRYX Cod. 1492
DESCRIPTION
Synthetic-based multigrade lubricant for mechanical transmissions of cars with high thermal stability.
CHARACTERISTICS
The particular additive technology of Tutela Matryx,
combined with the use of synthetic bases, warrants high
protection against the formation of scaling, also under
especially harsh operating temperature conditions.
l Excellent antiwear properties for optimum

protection of the mechanical parts under all
lubricating conditions and longer component life.
l Viscosity grading specifically intended to
optimise gearbox handling also at low
temperatures
l Fuel economy characteristics which by
attenuating internal system friction allow a
reduction of fuel consumption.
l Compatible with the materials used in seals.
Tutela Matryx exceeds the quality requirements of the

major European Manufacturers and therefore can be
used in cars of every make, type and power rating.
ADVICE ON USE
Tutela Matryx passes the Quality Specifications of the Major European Manufacturers and may therefore be used in
Cars of every brand, type and power rating.
RECOMMENDED BY
Fiat, Alfa Romeo, Lancia.
TECHNICAL DATA
SAE 75W-85, API GL 4,
FIAT 9.55550-MZ1 CONTRACTUAL TECHNICAL REF. N°F108.F02
TUTELA TRANSMISSION MULTIAXLE Cod. 1439
DESCRIPTION
Fully synthetic lubricant formulated for car differenzial units where API GL5 is required.
CHARACTERISTICS
Its particular additive formulation warrants total
protection of the differential also at the most extreme
temperatures.
● Fuel economy features.

● Lowers operating temperatures and noise.
TECHNICAL DATA
FIAT 9.55550 CONTRACTUAL TECHNICAL REF. N°
F426.E06
TUTELA TRANSMISSION SPORT ZC COMPETITION Cod. 1464
DESCRIPTION
Synthetic-based lubricant for transmissions and differential units with self-locking adjustement.
CHARACTERISTICS
It dramatically reduces the pitting that occurs on the
gears owing to high temperatures, allowing the
transmission of high power.
● Grade 80W-140
ADVICE ON USE
Competition use only.
TECHNICAL DATA
SAE 80W-140, API GL 5
TUTELA SPORT ZC RACING Cod. 1025
DESCRIPTION
Fully synthetic lubricant specifically for competition transmission units with front engagement with either sequential or
H control.
CHARACTERISTICS
With its special formulation and specific additivies it
minimises power absorption.
● With its viscosity and antiwear protection

features, warrants the best performance
conditions every time you shift gear.
ADVICE ON USE
Exclusive competition product
TECHNICAL DATA
SAE 75W-80, API GL 5
TUTELA TRANSMISSION SPORT ZC SUPREME Cod. 1472
DESCRIPTION
Fully-synthetic lubricant for transmission groups of sport and high-performances cars with electro-hydraulic sequential
shift commands (Manual Transmission Automated).
CHARACTERISTICS
● Maximum thermal stability

● Maximum shear strength
● Best anti-oxidation properties
● Best anti-wear properties
● Its properties make it suitable for off-series and
sports car, also designed for competition use
ADVICE ON USE
RECOMMENDED BY
Fiat Group Automobiles, CTR n F804.D08
APPROVED BY
TECHNICAL DATA
FIAT 9.55550-MX4 CONTRACTUAL TECHNICAL REFERENCE N°F803.C08
TUTELA TRANSMISSION STARFLUID Cod. 2289
DESCRIPTION
Automatic transmission fluid with a specific formulation for latest generation transmission systems of cars and trucks
with extended drain intervals.
CHARACTERISTICS
l High thermal stability at high temperatures.

l Formulation with specific antioxidant , anti-rust
and anti-corrosion properties for maximum
durability.
l Maximum compatibility with all (metalic and
other materials) components of the automatic
transmission systems.
l Antifoam additive makes regular lube supply
throughout all the transmission system.
ADVICE ON USE
Drain intervals according to the manufacturer indications
TECHNICAL DATA
ATF DEXRON II D, MB-Approval 236.1, ZF TE-ML 02F,
ZF TE-ML 03D, ZF TE-ML 04D, ZF TE-ML 14A,
ZF TE-ML 17C, MAN 339 TYPE Z1 and V1
Performance,
VOITH H55.6335.xx - Standard Drain Intervals,
VOITH US SB 013 - Standard Drain Intervals
TUTELA TRANSMISSION STARFLUID 7S Cod. 2293
DESCRIPTION
Automatic Transmission Fluid for high performance transmissions specially formulated for Mercedes-Benz Group 7-
speed transmissions (NAG2 Group transmission).
CHARACTERISTICS
l Excellent low temperature properties

l High fuel economy properties
l Oxidation Stability
ADVICE ON USE
Drain intervals according to manufacturer indications
TECHNICAL DATA
MB-approval 236.14
TUTELA TRANSMISSION STARGEAR Cod. 2285
DESCRIPTION
Synthetic-based fluid for manual transmission. The modern formulation allows the use on a wide range of
manufacturers.
CHARACTERISTICS
l High anti-wear capacity

l High oxidation stability
l High chemical stability and resistance to
mechanical cutting
l • Anti-Rust characteristics for maximum
protection of the gears
ADVICE ON USE
Drain intervals according to the manufacturer's
instructions.
TECHNICAL DATA
SAE 80W, API GL 4, MB-Approval 235.1,
ZF TE-ML 02B, ZF TE-ML 17A, MAN 341 Type E1,
MAN 341 Type Z2
TUTELA TRANSMISSION STARGEAR FV Cod. 2287
DESCRIPTION
Transmission fluid suitable for automatic transmissions fitted to Volkswagen Group vehicles.
CHARACTERISTICS
l Excellent anti-wear properties
TECHNICAL DATA
SAE 75W-90, API GL 4, VW 505.50 PERFORMANCE
TUTELA TRANSMISSION TECHNYX Cod. 1474
DESCRIPTION
Synthetic-based multigrade lubricant for Mechanical Transmissions of cars to be used in gearbox-differential units,
also fitted with hypoid gear pair and central differential (PTU).
CHARACTERISTICS
● Special E.P./antiwear additives to warrant

optimum protection of the transmission
components also under limit lubricating
conditions (when moving off, at pickup torque,
etc.) and with high load at low rpm.
● Particularly suitable for gearboxes with 4-wheel
drive.
● Outstanding adhesion of the lubricating film to
warrant optimum protection of the mechanical
parts under all lubricating conditions which
prevents gearbox noise.
● Viscosity grading specifically intended to
optimise gearbox handling under all operating
temperature conditions.
● Fuel economy product as it reduces the frictions
involved with high friction control under all
circumstances, thereby reducing fuel
consumption.
● Fully synthetic formula that guarantees excellent
temperature-oxidation resistance properties.
● Compatible with the materials used in seals.
TUTELA CAR TECHNYX passes the Quality Specifications of the Major European Manufacturers and may therefore
be used in Cars of every brand, type and power rating.
ADVICE ON USE
Tutela Car Technyx is grade SAE 75W-85 for use all year round. Replacement according to the manufacturer's
instructions.
RECOMMENDED BY
Fiat, Lancia, Alfa Romeo.
TECHNICAL DATA
SAE 75W-85, API GL 4 PLUS,
FIAT 9.55550-MX3 CONTRACTUAL TECHNICAL REF. N°F010.B05
TUTELA TRANSMISSION W 140/M-DA Cod. 1468
DESCRIPTION
Fluid for mechanical transmissions of cars, commercial vehicles, industrial vehicles, undercarriage elevators, fork lifts.
It is suitable for use in gears and differentials with hypoid gears and steering boxes, wherever lubrication with Extreme
Pressure (E.P.) characteristics is required.
CHARACTERISTICS
l Excellent E.P. properties in order to have optimal

protection even in extreme conditions (starting,
acceleration etc.) and of high load with low revs.
l Excellent anti-wear characteristics for more
durable transmission components (gears,
bearings, shafts, selectors, etc).
l High anti-foaming and demulsifying
characteristics in order to have constant
lubrication and maximum heat removal.
fluency in every operating temperature condition.
ADVICE ON USE
Replacement as indicated by the manufacturer.
RECOMMENDED BY
Fiat Group Automobiles, Iveco
TECHNICAL DATA
IVECO 18-1805 CLASSE RAM2,CONTRACTUAL TECHNICAL REF. N°I014.N87,
ZF TE-ML 16D, ZF TE-ML 21A,
MIL-L-2105 D Performance
TUTELA TRANSMISSION W 90/LS Cod. 1482
DESCRIPTION
Axles Fluid with or withou hypoid geras with specific features of EP (Extreme Pressure). Specially formulated for
normal and self-locking differentials with limited slip systems.
CHARACTERISTICS
l Characteristics of Extreme Pressure

l Gear protection formulation
l Anti-foam properties
l High "Limited slipped" properties
ADVICE ON USE
Drains intervals according the manufacturer indications
TECHNICAL DATA
SAE 80W-90, API GL 5, ZF TE-ML 05C,12C,21C,
GTG LLP-008, MIL-L-2105 D Performance
TUTELA TRANSMISSION W90 M-DA Cod. 1452
DESCRIPTION
Axle fluid for any vehicle applcations. It is suitable for differentials with hypoid gears and steering boxes, where
lubrication with Extreme Pressure (E.P.) characteristics is required.
CHARACTERISTICS
l Excellent E.P. properties in order to allow

optimal protection even in extreme conditions
(starting, acceleration etc.) and of high load with
low revs.
l Excellent anti-wear characteristics for more
durable transmission components (gears,
bearings, shafts, selectors, etc).
l High anti-foaming and demulsifying
characteristics in order to guarantee constant
lubrication and maximum heat removal.
fluency in every operating temperature condition.
ADVICE ON USE
TUTELA W90 M-DA is available in SAE 80W-90 grade
for all year use.
Replacement as indicated by the manufacturer.
RECOMMENDED BY
Fiat Group Automobiles, Iveco,
TECHNICAL DATA
IVECO 18-1805 CLASSE RAM1,CONTRACTUAL TECHNICAL REF. N°I009.G87,
FIAT 9.55550-DA2, ZF TE-ML 16B, ZF TE-ML 17B,
ZF TE-ML 19B, ZF TE-ML 21A,
MIL-L-2105 D Performance
TUTELA TRANSMISSION XVI Cod. 1429
DESCRIPTION
Transmission fluid for manual gearboxes
CHARACTERISTICS
● Shear stability
● Anti wear, anti rust and oxidation stability
● Synchronizer performance
ADVICE ON USE
RECOMMENDED BY
TECHNICAL DATA
SAE 75W-90, API GL 3, FIAT 9.55550-MZ4 CTR N°
F808.G08
TUTELA TRANSMISSION XVI LD Cod. 1403
DESCRIPTION
Manual transmissions semi-synthetic lubricant expressly developed for compact multipurpose vehicles at 2 and 4
wheel drive.
CHARACTERISTICS
● Maximum protection in severe operating

conditions
● Excellent thermal stability and oxidation
resistance
● Anti wear Properties
ADVICE ON USE
RECOMMENDED BY
APPROVED BY
TECHNICAL DATA
SAE 75W-80, API GL 4, FIAT 9.55550-MZ5 CONTRACTUAL TECHNICAL REFERENCE N°F921.B10
TUTELA TRANSMISSION ZC 75 SYNTH Cod. 1475
DESCRIPTION
Fully synthetic lubricating oil for mechanical transmissions of cars.
For use in gear/differential units, including those with hypoid torque, whenever lubrication with Extreme Pressure
(E.P.) characteristics is required.
CHARACTERISTICS
● Special E.P./anti-wear additives in order to

guarantee optimal protection of the transmission
components even in extreme conditions (starting,
acceleration etc.) and with high load at low revs.
● Specific viscosity grade in order to optimise gear
handling at every operating temperature.
● Excellent fluency during cold running to ensure
excellent shift ability even at the severest
temperatures.
● Optimal adhesiveness of the lubricant in order to
ensure optimal protection of the mechanical parts
in all conditions of lubrication, and prevents
excessive mechanical noise.
● Fuel economy product reduces frictions in and
consequently reduces fuel consumption.
● Fully synthetic formulation to ensure excellent
thermal-oxidative resistance, therefore prolonging
the period between oil changes.
TUTELA ZC 75 SYNTH exceeds the quality

requirements of the major European Manufacturers and therefore can be used in cars of every make, type and power
rating.
ADVICE ON USE
TUTELA ZC 75 SYNTH has a grade of SAE 75W-80 for all year use.
Changes should be made in accordance with the Manufacturers recommendations.
RECOMMENDED BY
Fiat, Lancia, Alfa Romeo.
TECHNICAL DATA
SAE 75W-80, API GL 5, MIL-L-2105 D Performance
TUTELA GREASE ALL STAR Cod. 1844
DESCRIPTION
Based disulfide molybdenum grease specific for constant-velocity joints. Formulated for high working temperature, it
ensures an utmost thermal resistance.
CHARACTERISTICS
l Wide working temperature range

l Better efficiency
l Important duration increase for high temperature
applications
l Higher thermal efficiency necessary for compact
joints
ADVICE ON USE
According constructor indication
RECOMMENDED BY
TECHNICAL DATA
NLGI 1-2,
FIAT 9.55580 CONTRACTUAL TECHNICAL REF.N°
F702.G07
TUTELA GREASE BAZOOKA BIO Cod. 1927
DESCRIPTION
Biodegradable vegetable based grease for general grease lubrication of motor vehicles, commercial and industrial
vehicles.
The product is green in colour and has a soft and stringy texture.
CHARACTERISTICS
l Excellent stability.
l High adhesiveness to lubricate parts particularly
exposed to elements.
l Optimal pump ability to improve fast distribution
of the lubricating product.
l Optimal resistance to water to withstand the
fading action caused by water.
Since it exceeds the strict quality requirements of the

major European Manufacturers, BAZOOKA grease can
be used in machinery of every make, type and power.
ADVICE ON USE
TUTELA BAZOOKA is available in NLGI 2 grade for use
in every season of the year.
TECHNICAL DATA
NLGI 2
TUTELA GREASE JOTA 1 Cod. 1900
DESCRIPTION
Multipurpose lithium based lubricating grease to for general lubrication of cars and commercial vehicles where NLGI 1
greases are demanded.
The product is a tawny colour and has a soft and stringy texture.
CHARACTERISTICS
l Good mechanical stability, keeps grease leakage

to a minimum.
l High resistance to oxidation to extend the life of
the lubricant.
l High resistance to the water to withstand the
l High thermal stability for use at temperatures
from -20°C to 120°C.
l Optimal pump ability, to improve fast lubricant
distribution.
TUTELA JOTA 1 exceeds the strict quality requirements

of the Major European Manufacturers and can be
utilised in machinery of every make, type and power
rating.
ADVICE ON USE
TUTELA JOTA 1 is available in NLGI 1 grade.
TECHNICAL DATA
NLGI 1
TUTELA GREASE MR 2 Cod. 1909
DESCRIPTION
Special multi-purpose lithium-based grease for the lubrication of heavy commercial vehicle wheel hub bearing and the
general grease lubrication of heavy commercial vehicles which do not require a specific grease. The product is a dark
green colour and has a soft and stringy texture.
CHARACTERISTICS
l Excellent mechanical stability, keeps grease

leakage to a minimum.
l High thermal stability for use in temperatures
from -30°C to +110°C.
As it exceeds the strict quality requirements of the

major European Manufacturers, TUTELA MR2 can be
used in machinery of every make, type and power
rating.
ADVICE ON USE
TUTELA MR2 is available in NLGI 2 grade.
For agricultural machinery replacement should be as
indicated by the constructor; however, in any case every
50 hours.
For industrial vehicles oil change intervals should be as indicated by the constructor, in any case not beyond 50,000
km.
RECOMMENDED BY
Iveco.
APPROVED BY
Piaggio.
TECHNICAL DATA
NLGI 2,
IVECO 18-1810 CLASSE I,CONTRACTUAL TECHNICAL REF. N°I007.C89
TUTELA GREASE MR 3 Cod. 1904
DESCRIPTION
Special multi-purpose lithium-based grease for the lubrication of heavy commercial vehicle wheel hub bearing and the
general grease lubrication of heavy commercial vehicles which do not require a specific grease.
The product is a dark green colour and has a soft and stringy texture.
CHARACTERISTICS
l Excellent mechanical stability, keeps grease

leakage to a minimum.
l High thermal stability for use in temperatures
from -20°C to 120°C.

major European Manufacturers, TUTELA MR3 can be
rating.
ADVICE ON USE
TUTELA MR3 is available in NLGI 3 grade.
For agricultural machinery replacement should be as
indicated by the constructor; however, in any case every
50 hours. For industrial vehicles oil replacement should
be as indicated by the constructor, in any case not
beyond 50,000 km.
RECOMMENDED BY
FIAT, Lancia, Alfa Romeo, Iveco.
APPROVED BY
Piaggio.
TECHNICAL DATA
NLGI 3,
FIAT 9.55580 CONTRACTUAL TECHNICAL REF.N°F002.I90,
IVECO 18-1810 CLASSE I,CONTRACTUAL TECHNICAL REF. N°I002.I90
TUTELA GREASE MRM 2 Cod. 1874
DESCRIPTION
Lithium and molybdenum disulphide based lubricant grease with E.P. (Extreme Pressure) characteristics. Ideal for
grease of C.V. joints and fifth wheels on articulated industrial vehicles, crowns bites of excavators, articulation joints of
moving machines, tractors and agricultural machinery and machinery in general with mechanical parts subjected to
heavy loads.
The product is black in colour and has a soft and stringy texture.
CHARACTERISTICS
l Excellent E.P. (Extreme Pressure)

characteristics to ensure the lubrication of
mechanical parts subjected to heavy loads.
l High dropping point for components operating at
high temperatures.
l Excellent mechanical stability keeping the
grease leakage to a minimum.
l High oxidation resistance to lengthen the working
life of the grease.
l High resistance to water to withstand the fading
action caused by water.

major European Manufacturers TUTELA MRM 2 can be
rating.
ADVICE ON USE
TUTELA MRM 2 is available in NLGI 2 grades.
For moving machines and agricultural machinery- grease lubrication should be performed according to the indications
of the constructor- in any case every 50 hours.
RECOMMENDED BY
Fiat, Lancia, Alfa Romeo, Iveco.
TECHNICAL DATA
NLGI 2,
IVECO 18-1810 CLASSE II,CONTRACTUAL TECHNICAL REF. N°I003.E90
TUTELA GREASE MRM ZERO Cod. 1867
DESCRIPTION
MRM ZERO semifluid grease with the special addition of organic molybdenum for lubrificating CV joints.
CHARACTERISTICS
l It reduces noise.
l It ensures excellent Extreme Pressure
characteristics.
RECOMMENDED BY
FIAT, Lancia, Alfa Romeo.
TECHNICAL DATA
NLGI 0
TUTELA GREASE STAR 700 Cod. 1843
DESCRIPTION
Specific grease for constant-velocity joints with wide temperature working range. It ensures a low friction coefficient,
higher compatibility with rubbers and elastomers.
CHARACTERISTICS
l Better compatibility with caps rubbers

l Wider working temperature range
l Higher performances to enhance comfort
ADVICE ON USE
According to constructor indications
RECOMMENDED BY
TECHNICAL DATA
NLGI 0/1,
FIAT 9.55580 CONTRACTUAL TECHNICAL REF.N°
F701.C07
TUTELA GREASE SYNTH P1 Cod. 1845
DESCRIPTION
Synthesized hydrocarbon based fluid containing a lithium complex soap thikner.
CHARACTERISTICS
High temperature stability,antiwear and extreme
pressure additives.
Tutela Synth P1 contains also an optimum amount of
Teflon which increses its lubricity-its ability to reduce
friction- and fight wear.
ADVICE ON USE
Large diameter bearings. Heavily loaded slow moving
parts. Low and high temperature applications.
TECHNICAL DATA
NLGI 1-2
TUTELA GREASE ZETA 2 Cod. 1873
DESCRIPTION
Special multi-purpose lithium and special oxide-based lubricant grease ideal for grease lubrication and protection of all
the mechanical parts on cars, light commercial and industrial vehicles that are subject to the fading action caused by
water and in particular suspension joints, track rods, articulated gear joints, hand-brake linkage and door hinges. The
product is adhesive and is white in colour and stringy.
CHARACTERISTICS
l Excellent adhesiveness to lubricate parts

particularly exposed to the atmospheric elements
and to protect them against rust and corrosion.
l High oxidation resistance to lengthen the working
life of the grease.
l High resistance to water to withstand the fading
action caused by water.

major European Manufacturers TUTELA ZETA 2 grease
can be used in machinery of every make, type and
power rating.
ADVICE ON USE
TUTELA ZETA 2 is available in NLGI 2 grade.
RECOMMENDED BY
Fiat, Lancia, Alfa Romeo, Iveco.
TECHNICAL DATA
NLGI 2,
FIAT 9.55580 CONTRACTUAL TECHNICAL REF.N°F008.I89,
IVECO 18-1810 CLASSE IX,CONTRACTUAL TECHNICAL REF. N°I008.I89
TUTELA BRAKE FLUID DOT 5.1 Cod. 1595
DESCRIPTION
Fully-synthetic brake fluid.
CHARACTERISTICS
It allows high performance especially under extreme
operating conditions(sporting competition ,adverse
weather).Stable at high and low temperature.High dry
(ERBP)and wet (WERBP)boiling point.Enables
increased fluidity and high protection of the whole
braking system.
ADVICE ON USE
Follow the vehicle manufacture's recommendations.
Carefully read the warnings on the packaging.
APPROVED BY
TECHNICAL DATA
FMVSS 116 - DOT 5.1, ISO 4925 Class 5-1,
SAE J1703, SAE J1704,
ENSAYOS INTA - UNE 26-109-88
TUTELA BRAKE FLUID EXTREME 5 Cod. 1599
DESCRIPTION
High Performance synthetic brake fluid for hydraulic disc braking system and servo controls on cars.
CHARACTERISTICS
l Highest boiling point (+300C). Prevents the

phenomenon of "vapour lock" (the presence of
steam bubbles in the brake circuit). Wet Boiling
Point 200C.
l Low pour point for use at low environmental
temperatures (down to -40C).
l Optimal anti-corrosion, rust and oxidation
properties for the protection of the metal and
other components in the braking circuit (including
cadmium and zinc protection treatments).
l Total compatibility with rubbers and packing in
order to prevent swelling or weakening of the
rubber or plastic sleeves or seals.
l High chemical stability in order to guarantee the
stability in the most severe conditions of thermal
stress.

Major European Manufacturers, TUTELA EXTREME 5
fluid can be used in machinery of every make, type and
power rating.
ADVICE ON USE
Changes should be made according to the Manufacturers recommendations however not beyond 2 years.
TECHNICAL DATA
FMVSS 116 - DOT4, SAE J1703, SAE J1704, ISO 4925,
CUNA NC 956-01, FIAT 9.55597,
TUTELA BRAKE FLUID LHM Cod. 1621
DESCRIPTION
Green coloured mineral fluid for hydraulic "full power" systems of commercial vehicles, for cabin lifting and dumping
systems industrial vehicles and hydraulic system of Citroën cars.
CHARACTERISTICS

temperatures (down to -60°C).
l Optimal anti-corrosive, rust proof and anti-
oxidation properties for the protection of the
metallic and other components in the system.
order to avoid swelling or weakening of the rubber
or plastic sleeves or seals.
l High chemical stability in order to maintain
product characteristics in the severest conditions
of thermal stress.
TUTELA LHM is not compatible with synthetic fluids for

hydraulic brakes and should not be mixed.
ADVICE ON USE
Replacement intervals should be as indicated by the
constructor, however, not beyond 2 years.
RECOMMENDED BY
IVECO
TECHNICAL DATA
FIAT 9.55597, ISO 7308,
IVECO 18-1823 CLASSE 1,CONTRACTUAL TECHNICAL REF. N°I207.B02,
PSA-CITROEN B71 2710,
TUTELA BRAKE FLUID PLUS 3 Cod. 1597
DESCRIPTION
Synthetic based brakes fluid for hydraulic disc and drum braking systems and servo-controls on cars, commercial and
industrial vehicles, moving machinery and agricultural machinery in general, scooter and motorcycles (whenever the
manufacturer recommends an NHTSA 116 DOT 3 control fluid).
CHARACTERISTICS
l High boiling point (+240C) prevents the effects of

"vapour lock" (the presence of steam bubbles in
the brake circuit). Wet Boiling Point 140C.
l Low pour point for use at low temperatures (down
to -40C).
l Excellent anti-corrosive, rustproof and anti-
oxidation properties to protect the metal and
other components of the braking circuit (including
cadmium and zinc protection treatments).
order to prevent swelling or weakening of the
rubber or plastic sleeves or seals.
l High chemical stability in order to guarantee the
product characteristics in the severest conditions
of thermal stress.

major European Manufacturers TUTELA PLUS 3 fluid
can be used in machinery of all make, type and power
rating.
ADVICE ON USE
Changes should be made in accordance with the
Manufacturers recommendation, however, every 2 years.
Read the warnings on the packaging carefully.
TECHNICAL DATA
FMVSS 116 - DOT3, SAE J1703, ISO 4925 Class 3,
FIAT 9.55597, CUNA NC 956-01,
TUTELA BRAKE FLUID TOP 4 Cod. 1598
DESCRIPTION
Synthetic based brake fluid for hydraulic disc and drum braking systems and servo-controls of cars, light commercial
vehicles, industrial vehicles, scooters and motorcycles (where manufacturer recommends an NHTSA 116 DOT 4
control fluid).
CHARACTERISTICS
l High boiling point (+270C) prevents the effects of

"vapour lock" (the presence of vapour bubbles in
the circuit brakes). Wet Boiling Point 180C.
temperatures (down to -40C).
l Excellent anti-corrosion, anti-rust and anti-
metallic and other components the braking circuit
(including cadmium and zinc protection
treatments).
or plastic seals.
l High chemical stability in order to maintain the
product characteristics in severest conditions of
thermal stress.

major European Manufacturers TUTELA TOP 4 can be
rating.
ADVICE ON USE
Replacement as indicated by the constructor, however,
in any case every 2 years.
Carefully read the instructions on the packaging.
RECOMMENDED BY
Fiat Group Automobiles.
TECHNICAL DATA
SAE J1703, SAE J1704, ISO 4925 Class 4,
FMVSS 116 - DOT4, CUNA NC 956-01,
FIAT 9.55597 CONTRACTUAL TECHNICAL REF.N°F001.A93,
TUTELA TOP 4 FOR ALFA Cod. 1618
DESCRIPTION
Synthetic based brake fluid for hydraulic disc and drum braking systems and servo-controls of Alfa Romeo cars.
Tutela Top 4 for Alfa Romeo has been developed with the experience of both FL Selenia and Alfa Romeo.
CHARACTERISTICS
● High boiling point (+270°C) prevents the effects of

"vapour lock" (the presence of vapour bubbles in
the circuit brakes). Wet Boiling Point 180°C.
● Low pour point for use at low environmental
temperatures (down to -40°C).
● Excellent anti-corrosion, anti-rust and anti-
metallic and other components the braking circuit
(including cadmium and zinc protection
treatments).
● Total compatibility with rubbers and packing in
or plastic seals.
● High chemical stability in order to maintain the
product characteristics in severest conditions of
thermal stress.
ADVICE ON USE
Replacement as indicated by the constructor, however,
in any case every 2 years.
Carefully read the instructions on the packaging.
RECOMMENDED BY
Alfa Romeo.
TECHNICAL DATA
SAE J1703, SAE J1704, ISO 4925 Class 4, FMVSS 116 - DOT4, FIAT 9.55597, CUNA NC 956-01
PARAFLU 11 Cod. 1655
DESCRIPTION
Paraflu 11 is a concentrated Ethylene Glycol protective fluid for radiators. It is suitable for professional use. Paraflu 11
provides ideal protection for the cooling systems of cars, light and heavy commercial vehicles, tractors and earth-
moving machinery.
CHARACTERISTICS
The fruit of state-of-the-art experimentation at PLI
research labs, the fluid responds fully to every
prerequisite even in the severest operating conditions.
PARAFLU 11 mixed with 50% water allows:
● Optimal removal of heat from the engine

combustion chamber.
● Maximum protection against:
● freezing (down to an outside temperature of -40°
C)
● the formation of scaling;
● boiling in the summer months, in motorway
pileups, in city traffic (circuit temperature up to
+125°C);
● corrosion of the metal elements in the cooling
circuits (cast iron, alluminium, copper);
● over-bulking of the rubber and plastic elements in
the circuit.
ADVICE ON USE
As recommended by the manufacturer:
total change every 2 years or everyy 60,000 Km
top-ups mixing the fluid with 50% water
Do not use the fluid concentrated
Do not mix fluids of different origins or makes
RECOMMENDED BY
Fiat, Lancia, Maserati, Iveco.
TECHNICAL DATA
FIAT 9.55523,
IVECO 18-1830,CONTRACTUAL TECHNICAL REF. N°I002.C00,
CUNA NC 956-16, ASTM D 3306 Type 1,
ASTM D 6210 Type 1-FF, CHRYSLER MS 7170
PARAFLU 11 READY Cod. 1674
DESCRIPTION
A ready to use Ethylene Glycol based protective fluid for radiators.
PARAFLU 11 EUROPEAN FORMULA is a protective fluid for cooling systems of motor vehicles, commercial and
industrial vehicles, tractors and earth-moving machinery and of scooters and motorcycles.
CHARACTERISTICS
PARAFLU 11 EUROPEAN FORMULA is a protective
fluid for cooling systems, developed for best results. The
formula is already mixed with de-ionised water (50%), in
order to obtain the optimal protection against the action
of:
● Freezing (down to external temperatures of -40°

C);
● Corrosion;
● Limescale;
● Boiling (circuit temperature up to +125°C);
The protecting ability of PARAFLU EUROPEAN

FORMULA has exceeded all the laboratory tests on the
materials used for the construction of the cooling
system.
ADVICE ON USE
The frequency of the oil change should be as indicated
by the Manufacturer (every 2 years or kilometres) when
restoring the level of the fluid, the same product must be used.
Do not dilute with water.
Do not mix products of different brand or origin.
RECOMMENDED BY
Maserati, Iveco, Laverda, Hesston Braud, Benati.
APPROVED BY
Piaggio.
TECHNICAL DATA
ASTM D 3306 Type 3, ASTM D 6210 Type 3-FF
PARAFLU CONC. FOR ALFA Cod. 1678
DESCRIPTION
Ethylene glycol based protective fluid for radiators, developed for the cooling system in all Alfa Romeo cars.
CHARACTERISTICS
Advanced stringent laboratory tests by FL Selenia and
the motor experience of Alfa Romeo have established
that this product meets all requirements, even in the
most severe of conditions. Its formulation ensures:
● Optimal removal of heat from the engine

combustion chamber.
● Maximum protection against:
- Freezing (down to external temperatures of -38°
C);
- The formation lime-scale;
- Boiling in the warm periods, in heavy traffic,
during town and city driving (circuit temperature
up to +110°C);
- Corrosion of all the metallic materials in the
cooling system (cast iron, aluminium, copper);
- Excessive swelling of rubbers and plastic in the
system.
ADVICE ON USE
For proper use of the product, Manufacturers recommendations must be followed, however, replacement should be no
more than every 2 years or kilometres as indicated by the Manufacturer.
When refilling, in order to restore the level of the fluid, the product must be mixed with 50% water.
Do not use the product concentrated.
RECOMMENDED BY
Alfa Romeo.
TECHNICAL DATA
PARAFLU DIL. FOR ALFA Cod. 1679
DESCRIPTION
Ready to the use, ethylene glycol based protective fluid for radiators, developed for the cooling systems of Alfa Romeo
vehicles.
CHARACTERISTICS
PARAFLU 11 for Alfa Romeo is a protective fluid for
cooling systems, developed for best results already
mixed with de-ionised water (50%), in order to obtain the
optimal protection against the action of:
● Freezing (down to external temperatures of -38°

C);
● Corrosion;
● Lime scale;
● Boiling (circuit temperature up to +110°C);
● Excessive swelling of rubbers and plastic in the
system.
The protecting ability of PARAFLU 11 for Alfa Romeo

has exceeded all the laboratory tests on the materials
used in the cooling systems of Alfa Romeo cars.
ADVICE ON USE
The frequency of the oil change should be as indicated
by the Manufacturer (every 2 years or kilometres) when
restoring the level of the fluid, the same product must be used.
RECOMMENDED BY
Alfa Romeo.
TECHNICAL DATA
PARAFLU UP Cod. 1681
DESCRIPTION
PARAFLU UP is a concentrated protective fluid for radiators. It is a Monoethylene Glycol base fluid, formulated with
organic inhibitors based on O.A.T. (Organic Acid Technology). Also suitable for professional use.
PARAFLU UP is a specific protective fluid for the cooling systems that contain innovative light alloy materials.
CHARACTERISTICS
Advanced stringent laboratory tests by PLI show that
PARAFLU UP meets all requirements even in extreme
running conditions.
PARAFLU UP mixed with 50% water allows:
l The maintenance of the protecting characteristics

of the inhibitor agents.
l Optimal heat removal from the engine
combustion chamber.
l The maximum protection against:
- Cavitation and electrical discharge;
C);
- Limescale formation;
- Boiling in the warm periods, traffic, city journeys
(circuit temperature up to +125°C);
circuit;
- Formation of deposits in the circuit also in
conditions of exasperated exercise.
ADVICE ON USE
For proper use of the product, Manufacturers recommendations must be followed.
When refilling, in order to restore the level of the fluid, the product must be mixed with 50% water.
Do not use the product concentrated.
RECOMMENDED BY
Fiat, Lancia, Alfa Romeo and Irisbus.
TECHNICAL DATA
FIAT 9.55523 CONTRACTUAL TECHNICAL REF.N°F101.M01,

ASTM D 3306 Type 1, CUNA NC 956-16,
CHRYSLER MS 12106
PARAFLU UP READY Cod. 1687
DESCRIPTION
Ready to use protective fluid for radiators. Monoethylene glycol base, formulated with organic inhibitors based on
O.A.T. (Organic Acid Technology).
PARAFLU UP READY is a specific protective fluid for the cooling systems that contain innovative light alloy materials.
CHARACTERISTICS
Advanced stringent laboratory tests by PLI show that
PARAFLU UP READY meets all requirements even in
extreme running conditions.
PARAFLU UP READY is a protective fluid developed for
best results already mixed with de-ionised water (50%)
to allow:
● The maintenance of the protecting characteristics

of the inhibitor agents.
● Optimal heat removal from the engine
combustion chamber.
● The maximum protection against:
- Cavitation and electrical discharge;
C);
- Limescale formation;
- Boiling in the warm periods, traffic, city journeys
(circuit temperature up to +125°C);
circuit;
- Formation of deposits in the circuit also in conditions of exasperated exercise.
ADVICE ON USE
For proper use of the product, Manufacturers recommendations must be followed.
when restoring the level of the fluid, the same product must be used.
TECHNICAL DATA
ASTM D 3306 Type 3, CUNA NC 956-16
6 IN 1 Cod. 2409
DESCRIPTION
Multipurpose lubricant spray.
CHARACTERISTICS
The innovative formula of this product allows it to:
l PENETRATE deeply
l RELEASE rusted mechanisms
l LUBRICATE and reduce friction coefficients
l PROTECT against corrosion
l REACTIVATE electrical contacts eliminating
damp
l CLEANSE thoroughly removing grease, tar and
combustion residue
RECOMMENDED BY
Irisbus
ALT FREEZE Cod. 1370
DESCRIPTION
...
CHARACTERISTICS
...
ADVICE ON USE
...
BENZINA CLEAN Cod. 2433
DESCRIPTION
Fuel additive for petrol.
CHARACTERISTICS
Injector cleaner.
It removes sludge and scaling.
The products allows:
l Freeing the injectors ,valves,pump and

combustion chamber of scaling;
l Re-establishing the original power and
performance;
l Improving handling;
l Reducing emissions.
ADVICE ON USE
Pour directly in the tank.
One 250 ml dose trats 50 litres of petrol.
BENZINA TREAT Cod. 2434
DESCRIPTION
CHARACTERISTICS
Multifunction petrol treatment .
It mantains the original engine efficiency.
Regular use of the product every 5.000 km ensures:
l Cleaning of the fuel supply sustem;

l Optimum combustion;
l Reduction of emissions;
l Dispersion of condensation water.
ADVICE ON USE
One 250 ml dose treats 50 litres of petrol.
BLOKKA BLOCCANTE FORTE Cod. 2418
DESCRIPTION
TUTELA PROFESSIONAL BLOKKA – THREAD BLOCKER – STRONG BLOCKER.
Anaerobic adhesives ideal for blocking and sealing threaded fittings (gas, compressed air, water, oil and
hydrocarbon tight and also to various chemical products); For fastening bearings, bushes, pulleys, gears and
cylindrical couplings in general; For sealing flat surfaces and flanged joints. They eliminate friction corrosion and
slackening and replace hemp, P.T.F.E. tapes and seals.
The STRONG grade is particularly suitable for definitive couplings.
ADVICE ON USE
Degrease the parts for better results. Apply the product
on one part and then assemble.
Consult the technical sheet for performance features.
TECHNICAL DATA
BAM (20 bar, 60°C)
BLOKKA SIGILLA RACCORDI MEDIO Cod. 2417
DESCRIPTION
TUTELA PROFESSIONAL BLOKKA – THREAD BLOCKER – MEDIUM FITTING SEALANT.
Anaerobic adhesives ideal for blocking and sealing threaded fittings (gas, compressed air, water, oil and hydrocarbon
tight and also to various chemical products); For fastening bearings, bushes, pulleys, gears and cylindrical couplings
in general; For sealing flat surfaces and flanged joints. They eliminate friction corrosion and slackening and replace
hemp, P.T .F.E. tapes and seals.
The MEDIUM grade allows removal using tools.
ADVICE ON USE
TECHNICAL DATA
DVGW PER GAS, DVGW-KTW PER ACQUA
POTABILE
BLOKKA SIGILLANTE PIANI Cod. 2419
DESCRIPTION
TUTELA PROFESSIONAL BLOKKA - SEALANT FOR SURFACES.
slackening and replace hemp, P.T .F.E. tapes and seals.
ADVICE ON USE
BRAKE CLEAN Cod. 2413
DESCRIPTION
Brake Clean thoroughly cleans and degreases braking systems: drum and disk types. Leaves no residues and does
not corrode metals.
Ideal for degreasing metal parts, bearings, bushes, threaded pins and couplings.
Outstanding for cleaning electric contacts and electric equipment in general.
ADVICE ON USE
Spray directly on the parts concerned, leave to act a few
seconds.
If necessary, help the cleansing action with a cloth.
Do not use on overheated metals. Do not use on
powered devices, wait for the product to evaporate
completely
or dry perfectly before switching on.
CAR WASH WAX Cod. 2380
DESCRIPTION
The Car Wash Wax facilitates drying of the vehicle, dissolving the film of washing water wheile also polishing and
protecting the bodywork.
Due to La Cera's rich concentration of water-repellent waxy substances, the water runs off without leaving any trace of
grease on the windscreen or windows.
CHARACTERISTICS
Compatible with car-wash shampoos.
ADVICE ON USE
Dilute with 1 to 3 g/litre
CARTA PROFESSIONALE Cod. 2372
DESCRIPTION
Carta Professionale is a multi-purpose paper made of cotton wool.
The paper is made of two plies which enable a good absorption capacity. Removes dirt and liquids.
1600 rips ensure saving and long life.
CONTACT Cod. 2408
DESCRIPTION
Tutela Professional CONTACTS TREATMENT.
Complete treatment for cleaning, lubricating and protecting electric contacts.
CHARACTERISTICS
l Penetrates, cleanses, eliminates dirt,dust, damp.

l Lubricates the mobile parts of sliders,
connectors, switches.
l Prevents oxidation and rust.
l Waterproofing properties.
DIESEL CLEAN Cod. 2431
DESCRIPTION
Additive for fuel.
CHARACTERISTICS
Injector cleaner.
It improves engine performance.
Diesel Clean is the diesel additive that allows:
l Cleansing and lubrication of the fuel supply

system;
l Ensuring perfect atomisation of the injectors;
l Freeing injectors from scaling;
l Reducing exhaust smoke;
l Optimising consumption levels;
l Restoring the initial power.
ADVICE ON USE
Pour directly in the fuel tank.
One 250 ml dose treats 50/60 litres of fuel oil.
DIESEL TMF Cod. 2432
DESCRIPTION
Additive for fuel.
CHARACTERISTICS
Multipurpose fuel oil treatment.
Reduces fuel consumption.
l Perfect efficiency of the injiectors and fuel supply

system;
l Improved cold starting;
l Lower noise and reduction of emissions;
l Increased cetane rating;
l Dispersion of condensation water;
l Pump wear protection.
ADVICE ON USE
Pour directly in the fuel tank.
One 250 ml dose treats 50/60 litres of fuel oil.
DIESEL ART Cod. 2421
DESCRIPTION
Additive for fuel.
CHARACTERISTICS
It prevents the freezing of fuel oil.
Diesel Art is the diesel additive that allows:
l Protection against frost;

l Improvement of fuel oil fluidity;
l Prevention of filter clogging;
l Improvement of combustion;
l Elimination of scaling and rust;
l Reduction of emission.
ADVICE ON USE
Pour directly inthe fuel tank, before the full.One 250 ml
treats 50/60 litres of fuel oil.
RECOMMENDED BY
FIAT,ALFA ROMEO,LANCIA
TECHNICAL DATA
CONTRACTUAL TECHNICAL REF. N°F601.L06
DRY SOL SPECIAL Cod. 2365
DESCRIPTION
DRY SOL SPECIAL oil absorbent powder is a powerful mineral absorbent (Mixture of Sepiolite, Smectite and other
minerals).
Unlike sawdust, traditionally used as absorbent, which however possesses a poor oil absorbing capability and is
inflammable, DRY SOL SPECIAL has a high absorption capacity and quickly absorbs all kinds of oils, greases and
other fluids.
CHARACTERISTICS
DRY SOL SPECIAL:
● has a high retention capacity and good slip-proofing

property;
● it is non inflammable and chemically inert,
● it is non abrasive,
● reacts well to all fluids and is easily removable after
use.
It is particularly suitable in repair workshops, fuel stations

and car parks: its absorbing power eliminates the danger
of slipping on tiled floors keeping them dry and clean.
ADVICE ON USE
Shake the product on stains of oil or other fluids, rub and
brush off.
FVI BOOSTER OIL Cod. 2461
DESCRIPTION
FVI Booster Oil protects the engine from wear through the balancing of the engine oil viscosity. Due to its very high
viscosity index, the product is particularly suitable for sport cars.
CHARACTERISTICS
• Restore the initial thickness of the oil film and oil
pressure.
• Provides further tightness of the elastic bands.
• Contrasts premature aging of the lubricant.
• Reduces the leakage of combustion gases.
• Prevents the deterioration of the bearings.
• Promotes optimum lubrication under difficult
conditions.
• Suitable for mineral and synthetic based lubricants for
petrol and diesel engines.
ADVICE ON USE
Add the product into the sump, while the engine is
warm; 300 ml treat from 3 to 5 liters of lube.
GLASS CLEAN Cod. 2422
DESCRIPTION
Its innovative formula allows the thorough degreasing of car windows (inside and out) easily and quickly.
CHARACTERISTICS
Leaves no marks and allows perfect, reflection-free, also
at night.
ADVICE ON USE
Pray on the glass surfaces, wipe with a clean cloth, dry
well and repeat if necessary.
IL DECERANTE Cod. 2373
DESCRIPTION
The Dewaxer
CHARACTERISTICS
The Dewaxer Tutela Professional is a specific product
for removing the layer polymer wax for cars.
ADVICE ON USE
Do not use in direct sunlight. Dilute 1 lt of product in 3-6
lt of water, depending on the thickness of the protective
film to be removed.
Spray evenly on the car. Leave to act from 3 to 5
minutes without allowing the product to dry.
Rinse with pressurised water.
IL DECERANTE PIU Cod. 2376
DESCRIPTION
The Dewaxer Plus
CHARACTERISTICS
The Dewaxer Plus is a specific product for removing the
layer of protective polymer wax for cars.
ADVICE ON USE
Do not use the product sunlight.
Dilute 1 lt of product in 3-6 lt of water,depending on the
thickness of the protective film to be removed.
Spray evenly on the car. Leave to act from 3 to 5
minutes without allowing the product to dry.
Rinse with pressuried water.
IL DETERGENTE MOTORE Cod. 2374
DESCRIPTION
The engine cleaner Tutela Professional is a specific product for cleaning engines, engine compartments, under-door
sills, wheel rims.
ADVICE ON USE
Carry out the operation with the engine cold.
Dilute the product 1 to 1 with water.
Spray evenly on the surface to be treated and leave to
act for about 5 minutes. Remove the residues eighter by
hand using a sponge or with a fluid vacuum cleaner.
Rinse with plenty of water. For particularly stubborn dirt,
higher product concentrations are recommended.
IL LAVATUTE Cod. 2371
DESCRIPTION
The overall washing fluid
CHARACTERISTICS
Tutela Professional overall washing fluid is a liquid detrgent
studied to wash overalls and work clothes in the best way
possible.
It eliminates the most stubborn dirt (oil, grease stains,
etc...) without leaving any remains in the washing drum.
ADVICE ON USE
Machine washing:temperature 90°C. Do not prewash. One-
dose prewash to be used in full.
Hand Washing: put a small quantity of product on the
more stubborn stains. Then brush energetically to make
the product penetrate in depth. Rinse.
INSECT STOP Cod. 1360
DESCRIPTION
...
CHARACTERISTICS
...
ADVICE ON USE
...
IVORYSIL AC Cod. 2420
DESCRIPTION
The top performance silicone seal. Due to its outstanding mechanical and chemical resistance features, it has been
chosen as O.E. by most manufactures for under bonnet purposes.
Ensures perfect resistance to water, mineral and synthetic oils and antifreeze fluids and withstands temperatures from
-70°C to +300°C.
Does not drip and can therefore also be used on vertical surfaces. Hardens at room temperature without losing
volume.
Specially for catalytic silencers.
ADVICE ON USE
Apply on clean, degreased parts. Asseble after approx.
15 minutes.
Close the tube carefully and store in a cool place.
LO SHAMPOO Cod. 2375
DESCRIPTION
The Shampoo Tutela Professional is a neutral product with a high concentration of surfaces-active agents.
Ideal for washing the exterior of motor vehicles, either by hand or in automatic systems.
MOTOR CLEAN Cod. 2414
DESCRIPTION
the strong, concentrated formula easily eliminates dirt and the most obstinate scales from engines: oil, grease,
sludge and pigmented dirt.
Motor Clean is not abrasive and does not harm the surfaces it might come into contact with (rubber, plastic, paint).
ADVICE ON USE
Spray on the cold engine. Leave to act a few minutes
without drying. Remove the more resistant dirt using a
sponge and rise generously
NITRILE 100 Cod. 2368
DESCRIPTION
Tutela Professional disposable nitryl gloves protect the hands from oils, greases, fuel and chemical products.
Nitryl warrants outstanding life and the utmost resistance to cutting.
Nitryl gloves feature an excellent fit,comfort and sensitivity to the touch.
ADVICE ON USE
Reccomended for: garage, workshops and industry.
Ideal and safe for:work,repairs,DIY.

PASTA LAVAMANI Cod. 2361
DESCRIPTION
Tutela Professional hand cleaning paste is the most traditional of professional hand cleaners. It is formulated with top
quality surface-active agents of natural origin; it cleans the hands thoroughly of every type of dirt in a simple and cost-
effective way.
PASTA LAVAMANI Cod. 2362
DESCRIPTION
Tutela Professional hand cleaning paste is the most traditional of professional hand cleaners.
CHARACTERISTICS
l - it is formulated with top quality surface-active

agents of natural origin;
l - it cleans the hands thoroughly of every type of
dirt in a simple and cost-effective way.
PETRONAS TUTELA PROFESSIONAL GPL CLEAN Cod. 2320
DESCRIPTION
Concentrated cleaner for LPG supply systems.
Special high performance additive studied for cleaning the supply system of all cars running on LPG with timed or
sequential injection systems in the gas or liquid state, to be sprayed directly into the gas tank.
CHARACTERISTICS
Thanks to its innovative formulation:
● It removes deposits from the injection system

that cause difficult starting, idling failure, delay in
engine response, loss of power and jerky
running.
● It quickly and effectively eliminates condensation
and deposits from the gas tank and pressure
reducer keeping them clean and efficient over the
course of time.
● It optimises combustion regularity, cold starting
and handling, limiting maintenance operations
and running costs of the LPG system.
USE PETRONAS TUTELA PROFESSIONAL GPL

CLEAN TO PREVENT:
• Difficult starting.
• Idling failure.
• Delay in engine response.
• Loss of power.
• Jerky running.
FUNCTIONS AND ADVANTAGES:

• It removes deposits from the whole injection system.
• It removes damp and deposits of varnish, sulphur and
ammonia.
• It removes contaminants from the tank and pressure reducer keeping them clean and efficient over the course of
time.
• It optimises combustion regularity and handling.
• It facilitates cold starting.
• It limits maintenance operations and running costs of the LPG system.
• Easy and safe due to the use of the special universal adapter.
Engineered with LANDIRENZO
PACKAGE:
Spray can
Contents 120 ml.
CODE:
23203110 (Languages :Italian-English-German-French-Dutch)
23203111 (Languages:Polish-Turkish-Bulgarian-Serbian-Romanian)
ADVICE ON USE
DOSE:
The content of a 120 ml. can is enough to treat a full tank of LPG (up to 50 litres). To retain the benefits, repeat the
treatment every 5,000 Km. In the case of need due to a faulty injection system, the treatment can be carried out for
two consecutive fuel filling operations.
APPLICATIONS:
Effective in all injection systems. Compatible with catalytic converters.
DIRECTIONS FOR USE:

Make sure that the engine is off and that the tank is at least 80% empty. Firmly tighten the special patented universal
adapter to the central threaded hole of the fuel filler (if necessary cutting the excess threaded parts). Connect the free
end of the adapter to the nozzle of the GPL Clean product valve; with the can in the overturned position, press
completely for about 30 seconds so that the product has enough time to enter the gas tank. Remove the adapter and
fill up with gas.
RECOMMENDED BY
LANDIRENZO Approval N° LR1711
PETRONAS TUTELA PROFESSIONAL RAIL CLEAN Cod. 2321
DESCRIPTION
Professional Concentrated Cleaner for LPG and Methane engine injectors.
Specific solvent for the professional cleaning of LPG and Methane engine injectors.
CHARACTERISTICS
Thanks to its innovative formulation it can remove
deposits and scaling and restore optimum injector flow
conditions in just minutes. Rail Clean has been studied
especially to offer the utmost compatibility with the
rubber, plastic and metal parts of GAS system
injectors.
Engineered with LANDIRENZO
PACKAGE:
Re-closable metal can with removable cap to facilitate
use.
Contents 1 litre.
CODE:
23211642 (Languages :Italian-English-German-Dutch-
French-Polish-Turkish-Bulgarian-Serbian-Romanian)
ADVICE ON USE
To be used only with the special Petronas Equipment
GAS RAIL WASHING SYSTEM.
Replace the product after 5 washing cycles.
RECOMMENDED BY
LANDIRENZO Approval N° LR2711
QUIKKER CONCENTRATED CLEANER Cod. 2415
DESCRIPTION
Quikker is the Degreasing Concentrated Cleaner. Quickly eliminates the most stubborn dirt: oil, grease, fat.
Ideal in the workshop (surfaces, floors, tools, miscellaneous equipment, rims), home, caravan, garage.
Not abrasive.
ADVICE ON USE
Diluition: 1/1 (Pure)
Car: Engine, rims, oil stains, tools, motor cycles
Other uses: Shutters, tools, barbecue, lawn mower,
machinery
Diluition: 1/5
Car: Bumpers, soft top, fabrics
Other uses: Tiles, radiators, garden furniture
Diluiton: 1/20
Car: Bodywork, plastic parts, tyres caravan
Other uses: Bathroom fittings, floors, wallpaper,
bicycles
WARNING: dilute 1/100 on windows

QUIKKER SGRASSANTE MULTIUSO Cod. 2416
DESCRIPTION
Quikker is the multi-purpose degreaser ready for use. It easily removes the most difficult dirt like grease, oil and
scales.
It is not abrasive.
It is ideal in: the home for oven, blinds and tiles; car/caravan/motor bike for rims and engine; garden for tools,
barbecue and garden furniture; garage for floors, tools and work tops.
ADVICE ON USE
Spray directly and leave to act for a few seconds.
Wipe with a damp cloth or sponge and rinse.
ROSSANA Cod. 2369
DESCRIPTION
Rossana red hand cleaning paste
CHARACTERISTICS
Rossana hand cleaning paste has been formulated to
effectively meet the needs of the most exactings
mechanics. Ideal for the mechanical industry, body repair
shops and trucks drivers, but also for bricolage and
D.I.Y.The innovative formula ensures a through cleansing
action and the presence of the protein "Sericin" protects
the skin.
ADVICE ON USE
Take a small amount of product wetting the hands. Rub to
completely emulsify the dirt. Rinse and dry carefully.
ROSSANA Cod. 2370
DESCRIPTION
Rossana liquid soap.
CHARACTERISTICS
Rossana liquid soap is the product for new-generation
mechanics who want an energetic product but without
abrasive action. It eliminates every kind of dirt without the
use of abrasives.Ideal for mechanical industry, body repair
shops and truck drivers, but also for bricolage and D.I.Y.
Its formula rich in surface-active agents and softening
substances allows perfect cleansing of the hands while
maintaining their natural smoothness.
ADVICE ON USE
Take a small quantity of product without wetting the
hands. Rub to completely emulsify the dirt. Rinse and dry
carefully.
SC 35 Cod. 1002
DESCRIPTION
Concentrated windscreen cleaner.
Thanks to its balanced formula it cleans the windscreen, windows and headlamps thoroughly.
It cleans and degreases, removing insects and all traces of dirt, offering a perfect visibility.
CHARACTERISTICS
It does not harm the materials with which it comes into
contact such as painted parts, rubber and plastic parts,
and chromium plating in general.
It also lowers the freezing point of the water in the
windscreen washer system during winter, assuring an
adequate protection against freezing.
ADVICE ON USE
Istructions for use:
-35°C) SC35: 1; H2O: - /
-20°C) SC35: 1; H2O: 1 /
-10°C) SC35: 1; H2O: 2 /
0 °C) SC35: 1; H2O: 6 /
*) SC35: 1; H2O: 10
RECOMMENDED BY
Fiat, Alfa Romeo, Lancia, Iveco.
TECHNICAL DATA
FIAT 9.55522 CONTRACTUAL TECHNICAL REF.N°F201.D02,

IVECO 18-1802,CONTRACTUAL TECHNICAL REF. N°I005.B00
SC 35 Cod. 1003
DESCRIPTION
...
ADVICE ON USE
...
SILIKON Cod. 2407
DESCRIPTION
TRANSPARENT AND COLOURLESS SILICONE OIL
The high volatility of the solvent/propellent allows the immediate creation of a protective oily film, without excessive
dripping,
so suitable for vertical applications.
Ideal in the treatment of rubbers, plastichs, elastomers, metals.
CHARACTERISTICS
l LUBRICATES: withstands washing.

l PROTECTS: prevents the aging of seals and
rubber parts. Protects equipment exposed to
damp.
l WATERPROOFS: waterproofs the materials it
comes into contact with.
SUPER CLEAN Cod. 2363
DESCRIPTION
Tutela Professional Super Clean fluid cream is a vegetable-based product with a rich composition of surface-active
agents. It cleans the hands in depth and, thanks to the practical dispenser ensures, waste-free dosage and optimum
conditions of hygiene.
T 800 Cod. 2360
DESCRIPTION
Pure white cellulose tissue rolls.
The presence of 2-plies tissue allows high absorbing capacity and guarantees the removal of dirt and fluids.
800 tears ensure long use and considerable saving.
Recommended for: mechanics, workshops, car washing stations.

TP1 Cod. 2410
DESCRIPTION
TP1 white grease is a complex calcium soap-based grease. It has a high lubricating power with excellent adhesion to
the different materials.
It withstands ageing, corrosion and the action of water (hot and cold), diluted acids and alkalines.
It is suitable for all the mobile parts of the car such as hinges, locks, linkages, of the gearbox, pedal units, joints,
centralised devices (windows, electric mirrors, doors), springs, chains, wheel hub bearings and suspensions.
It protects the surfaces with which it comes into contact at length.
TECHNICAL DATA
NLGI 1-2
TP2 Cod. 2411
DESCRIPTION
TP 2 motorcycle chain grease is a specific grease for lubricating chains.
The particular type of grease, the presence of PTFE and of adhesion promoting polymers allow excellent and lasting
lubrication.
CHARACTERISTICS
It withstands water and the weather.
It reduces wear friction and prevents elongation.
Particularly effective for fast chain high loads and
industy environments.
O-ring-compatible.
APPROVED BY
Piaggio, Gilera.
TECHNICAL DATA
NLGI 1-2
6 IN 1 Cod. 2409
DESCRIPTION
Multipurpose lubricant spray.
CHARACTERISTICS
The innovative formula of this product allows it to:
l PENETRATE deeply
l RELEASE rusted mechanisms
l LUBRICATE and reduce friction coefficients
l PROTECT against corrosion
l REACTIVATE electrical contacts eliminating
damp
l CLEANSE thoroughly removing grease, tar and
combustion residue
RECOMMENDED BY
Irisbus
ALT FREEZE Cod. 1370
DESCRIPTION
...
CHARACTERISTICS
...
ADVICE ON USE
...
BENZINA CLEAN Cod. 2433
DESCRIPTION
CHARACTERISTICS
Injector cleaner.
It removes sludge and scaling.
The products allows:
l Freeing the injectors ,valves,pump and

combustion chamber of scaling;
l Re-establishing the original power and
performance;
l Improving handling;
l Reducing emissions.
ADVICE ON USE
One 250 ml dose trats 50 litres of petrol.
BENZINA TREAT Cod. 2434
DESCRIPTION
CHARACTERISTICS
Multifunction petrol treatment .
It mantains the original engine efficiency.
l Cleaning of the fuel supply sustem;

l Optimum combustion;
l Reduction of emissions;
l Dispersion of condensation water.
ADVICE ON USE
One 250 ml dose treats 50 litres of petrol.
BLOKKA BLOCCANTE FORTE Cod. 2418
DESCRIPTION
TUTELA PROFESSIONAL BLOKKA – THREAD BLOCKER – STRONG BLOCKER.
slackening and replace hemp, P.T.F.E. tapes and seals.
The STRONG grade is particularly suitable for definitive couplings.
ADVICE ON USE
TECHNICAL DATA
BAM (20 bar, 60°C)
BLOKKA SIGILLA RACCORDI MEDIO Cod. 2417
DESCRIPTION
TUTELA PROFESSIONAL BLOKKA – THREAD BLOCKER – MEDIUM FITTING SEALANT.
Anaerobic adhesives ideal for blocking and sealing threaded fittings (gas, compressed air, water, oil and hydrocarbon
tight and also to various chemical products); For fastening bearings, bushes, pulleys, gears and cylindrical couplings
in general; For sealing flat surfaces and flanged joints. They eliminate friction corrosion and slackening and replace
hemp, P.T .F.E. tapes and seals.
The MEDIUM grade allows removal using tools.
ADVICE ON USE
TECHNICAL DATA
DVGW PER GAS, DVGW-KTW PER ACQUA
POTABILE
BLOKKA SIGILLANTE PIANI Cod. 2419
DESCRIPTION
TUTELA PROFESSIONAL BLOKKA - SEALANT FOR SURFACES.
slackening and replace hemp, P.T .F.E. tapes and seals.
ADVICE ON USE
BRAKE CLEAN Cod. 2413
DESCRIPTION
Brake Clean thoroughly cleans and degreases braking systems: drum and disk types. Leaves no residues and does
not corrode metals.
Ideal for degreasing metal parts, bearings, bushes, threaded pins and couplings.
Outstanding for cleaning electric contacts and electric equipment in general.
ADVICE ON USE
Spray directly on the parts concerned, leave to act a few
seconds.
If necessary, help the cleansing action with a cloth.
Do not use on overheated metals. Do not use on
powered devices, wait for the product to evaporate
completely
or dry perfectly before switching on.

FL Eng Scatalogo 1 1 0 CARS PDF

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

FL Eng Scatalogo 1 1 0 CARS PDF

Uploaded by

Copyright:

Available Formats

HPX Cod.

● Easy cold starting in rigid climatic conditions (up

All these qualitative aspects ensure the highest level of

l Easy cold starting in rigid climatic conditions (up

Since it meets and exceeds the quality requirements of

● It ensures very high stability at high

● It ensures high stability at high temperatures

● Selenia DigiteK Pure Energy maximizes fuel

l engine protection to cold starting and in extreme

Selenia Gold can be used both for petrol and diesel

l the most actual international omologation API

l Selenia K Pure Energy is the lubricant especially

● It lengthens the life of catalysts on petrol

● Fully synthetic lubricant

● It lengthens the life of catalysts on petrol

● Maximum power distribution;

As it meets and exceeds the quality requirements of the

SELENIA RACING has won in the following circuits:

Born in the field of competitions, Selenia Sport 10W-60

● reduction of fuel consumption

l It allows maximum power distribution

● the almost total lack of evaporation in high

l maximum oxidation resistance

l Selenia StAR Pure Energy is the lubricant

l Improved cold starting as a result of the high

In the turbo charged engines, it eliminates the risk of

l The advanced viscosity grade 5W-40 ensures the

l Selenia Wr Forward maximizes fuel economy

l It increases protection on the mostly stressed

The latest ACEA A3/B3-2002 specification ensures

l Special formulation has been developed

FIAT 9.55550-SA1 CONTRACTUAL TECHNICAL REF.

l Excellent low temperature performances.

l The high technology formulation maximizes

l Fully synthetic formulation, optimal transmission

TUTELA CVT NG exceeds the quality requirements of

● Developed specifically to adapt itself to various

In consideration of the high quality of the product,

l High fluidity at low temperatures.

● Optimal speed shift

l Excellent performance and maneuverability at low

● Excellent cold flow properties

l Optimal fluency when cold in order to reduce

TUTELA GI/A exceeds the strict quality requirements of

l Particular ATF additives raises the

Tutela GI/E exceeds the quality requirements of the

l maximum viscosity stability

l maximum viscosity stability

l Excellent antiwear properties for optimum

Tutela Matryx exceeds the quality requirements of the

● Fuel economy features.

● With its viscosity and antiwear protection

● Maximum thermal stability

l High thermal stability at high temperatures.

l Excellent low temperature properties

l High anti-wear capacity

l Excellent anti-wear properties

● Special E.P./antiwear additives to warrant

l Excellent E.P. properties in order to have optimal

l Characteristics of Extreme Pressure

l Excellent E.P. properties in order to allow

● Maximum protection in severe operating