Professional Documents
Culture Documents
Shubham Shukla CV
Shubham Shukla CV
Shubham Shukla CV
H.No.160,Vill:BhadiKhurd,Post:Puraina,Dis-Basti,UttarPradesh,India 272001
Phone:+918417881622, Email-Id: Shubhamshukla_@hotmail.com,
Linkedin: https://www.linkedin.com/in/shubham-shukla-411872194
QC INSPECTOR – MECHANICAL/WELDING/PIPING/TANK
I am a Diploma holder in Mechanical Engineering; Offering more than 6 Years of industrial experience
in Oil & Gas Refineries, Petrochemicals Piping & Pipelines fabrication & erection, structure
fabrication and storage tanks fabrication and erection.
Currently I am seeking a challenging & rewarding assignment to work on.
SUMMARY OF SKILLS
● Hands on experience in managing inspection activities (shop & site), controlling various types
of documents like WPS, PQR, ITP, Method statements, welder trainings, welding inspection, NDT
activities, PWHT and Preheating activity, hydro testing, test package preparation ,loop
clearance, Radiography films interpretation and inspection of incoming material.
● TWI Certified welding Inspector (CSWIP 3.1)
● Involved in various types of project functions like Process piping work, Pipelines, Structural
works, storage tank and Shutdown activity.
● Capable of interpreting International & national codes and standards Like ASME Sec IX, V & B31. 3,
AWS D 1.1, API 650 and Specific project requirements. Including welding requirements for
various types of materials like Carbon Steel, Stainless Steel, Alloy steel, duplex stainless steel
etc.
● Effective resource planning/ optimization, focusing on waste reduction, enhancing productivity and
effectiveness. Inbuilt ability to use sound judgment, decision-making skills & effectively perform in a
self-directed environment, team work, focus on client satisfaction.
JOB RESPONSIBLITIES:
● Carry out inspection and audits – issue reports and maintain QC Documentation as per Requirement.
● Look after the gamut of responsibility pertaining to Stage inspection of incoming welding
consumables, piping, tanks & structural materials with, PO, IRN, MTC and IMIR.
● Expertise in preparing and maintaining WPS, PQR, ITP and QAP for various types of welding processes
and materials.
● Reviewing the entire Material Test Certificate and Documents as per Quality Plan, P.O. & Engineering.
● Accountable for carrying out Welder Training and Qualification Test.
● Other responsibilities include Weld Visual, Fit up, Hardness & PMI inspection (site & fabrication).
● To prepare and maintain repair analysis report for welder’s performance.
● Making sure the Material Traceability (consumables) is available before, during & after welding.
● Holds credential in verification and application of the requirements of the applicable welding codes,
standards, scope of work and issued for construction (IFC) drawings Initiating Quality check on the
material and installation as per the Quality Specs/manual.
● Shop and field welding inspection and control other requirement like PWHT, Preheat and PMI.
Page
1 0f 3
● Maintaining all records for calibration of welding equipment and other measuring instruments.
● Witnessing Hydro and pneumatic test for approved test packs.
● Controlling the NDT requirement according to piping class and specific service requirements.
● Expertise in Interpreting Radiography films.
● Piping Test-Package preparation and loop file clearance.
● Submit the dossier (if required) to client through official letter from Resident Manager..
● Review Supplier/Subcontractor Quality Control Plans/Inspection Test plans, vendor equipment
(Bought out) manual and procedures.
● Maintain documentation as per the Quality Assurance Plan.
● Coordinate for Calibration of measuring instruments, NDT instruments, welding rectifier / generator,
Electrode baking / carrying oven and maintain calibrated certificates update. Ensure IMTE’s
(Inspection Measuring Test Equipment) were kept safely.
● Monitor / cross check drawing list maintained by Field Service dept. and verify the drawing issue
control at site.
● Get signatures in Inspection reports, Protocols from client, consultant.
● Ensure all the documents are in order along with client’s endorsement.
● Achieve Timeliness in completing Inspection reports, Protocols.
● Collect the entire document at the end of the project.
● Organization IV
● M/s Kamlesh Kumar Singh Engineering Pvt.Ltd.
Position : Lead QA/QC Engineer
Period : Feb 2017 up to Sep 2019
Project : DHDT Unit shutdown, Aishwarya Project, Obra-C thermal Power Plant.
Client : TECHNIP FMC (IOCL BARAUNI), Doosan Power system.
Page
2 0f 3
● Organization V
● M/s Excellent Projects (I) Pvt. Ltd.
Position : QA/QC Incharge
Period : Jan 2020 up to Sep Till date
Project : BS-VI Project.
Client : Engineers India ltd. (Indian Oil corporation ltd.)
EDUCATIONAL CREDENTIALS:
CERTIFICATIONS:
● Certification in welding inspection CSWIP 3.1
● ASNT Level II in RT, UT, MPT, DPT.
● Received training on Practical welding and Weld visual inspection of MMAW and GTAW process from
(TECHNOCON TRAINING INSTITUTE), (IIW), KOLKATA.
Page
3 0f 3
● One-day training program on working in confined space.
● One Day training program on first aid
Page
4 0f 3