Professional Documents
Culture Documents
LT1213 STech Spec
LT1213 STech Spec
LT1213S
NORDBERG LT1213S is a track-mounted, self propelled, diesel engine powered primary crushing
unit. Robust construction enables the application of NORDBERG LT1213S in the toughest of rock
sites. A powerful undercarriage system makes NORDBERG LT1213S maneuverable. The nominal
capacity of this machine is up to 400 tph (440 stph) in blasted rock material. Equipped with
recycling accessories the NORDBERG LT1213S can achieve maximum production of 300 tph (330
stph) on demolition material containing reinforcing steel.
Main dimensions of NORDBERG LT1213S during crushing operations with default options
Includes standard equipment of frame, tracks, hydraulics, electrification, control panels, fuel tank,
service platform, rails and ladders.
Tracked undercarriage gives the NORDBERG LT1213S high maneuverability under any ground
conditions. Track control panel is a carrying harness with an 8 meter (26 ft) cable.
-track sizeD57 long
-track length c/c4000 mm (13 ft 1 in)
-track width500 mm (1 ft 8 in)
-chain tensioningby grease cylinder
-No of links53 off
-No track rollers10 off
-final driveLohmann+Stolterfoht GFT60T3+A10VEC80Hz
-track control panel
-diesel enginerpm adjustment
-tracks forward/reverse
-emergency stop switch1 off
Fuel tank
-volume600 l (160 gal)
Main control panel is mounted on the side of the NORDBERG LT1213S frame including the
following functions:
-processstart/stop
-drive speed categories1,2 or 3
-lights on/off
-emergency stop switch1 off
-gauges, warning lamps, indication lamps, warning horn, monitoring display and switches for
optional equipment
-crusher speed switch
Set(s) of Manuals
English
Finnish
German
Swedish
French
Spanish
Name plates
English (CAT)
Finnish (CAT)
German (CAT)
Swedish (CAT)
French (CAT)
Display unit
English
Finnish
German
Swedish
French
Nordberg beige
The finish paint quality is gloss alkyd and the paint film thickness 40µm + 40µm
Special painting
Electrification
Feeder unit
-width1170 mm (3 ft 10 in)
-length4340 mm (14 ft 3 in)
-grizzly length750 mm (2 ft 6 in)
-feeder inclinationhorizontal
-feeder control panel
-feederstart/stop
-emergency stop switch1 off
-feeder rpm+/-
Mesh size 35 mm
Mesh size 35 mm
Rubber bottom
-width2600 mm (8 ft 6 in)
-liner thickness10 mm (3/8 in)
Crusher unit
Manganese hammers
Manganese hammers for NP1213M.
Hydraulic assistance
Hydraulic assistance for setting adjustment
-includes
-hydraulic cylinders
-hydraulic valves and piping
-Drawing No: 340956
Service hoist
Lifting device for changing the crusher wear parts. Transported separately in one piece.
Main conveyor
Belt conveyor for transporting the crushed material from the crusher to the discharge point. The
conveyor is equipped with hydraulic drive and emergency stop wires on both sides of the
conveyor.
-Mechanical preparation for belt scale. Preparation dosn't include elecrical items.
-Requires
- belt scale type
-includes
-magnet separator
-electrification
-hydraulics
-hydraulic drive
Engine unit
-hydraulic tank
-volume400 l (105 gal)
Screen unit
Screen TK13-30S
Horizontal single deck, single shaft screen. Steel wire and rubber screen clothes available.
For connecting the auxiliary hydraulic equipment to the hydraulic system of the NORDBERG LT.
Includes hydraulic solenoid valve and electrification.
-material level control of the secondary unit stops/starts the feeder unit
-requires
-water supply 500 l/h (130 gal/h) at 4-6 bar
-includes
-nozzles
-crusher cavity2 off
-main conveyor2+2 off
-piping and manual valves
-connection forwater supply1 off
Fuel pump 10 kg
-electric drive
-capacity60 l (16 gal) /min
Service kit 30 kg
Includes a set of spare parts e.g. fuses, relays, bulbs, seals etc. for first service of the unit.
USA
Canada
UK