Professional Documents
Culture Documents
5ty 384 20015 1 Rev02
5ty 384 20015 1 Rev02
5ty 384 20015 1 Rev02
1150 900
625
25 25
1690
D 300 D
575 3140
1720
1390 636 185 1830
12.5
112.5 1015
B
160 160
02
200 12.5
1875 1875 1180
350 500 of Active Part/
500 585 Top Side View Transformer 1300
3225 (Internal) 2025 (Internal)
1700(Lifting & Jacking) 1700(Lifting & Jacking)
C of Active Part/ Transformer C
1100 1100
IV Side
240 1605 1605 240
240
1129
(Internal)
5X300(Pitch)=1500
4X300(Pitch)=1200
240
240
610 214
364
Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
LV Side
2300 2300 1400
1150
185
880 880 225
HV Side 32
1500(Lifting & Jacking)
1165
SECTION C-C
1500(Lifting & Jacking) 2840 (Internal)
1400 100 100 3240
2730 (Internal)
TBEA Energy India Pvt. Ltd.
Indent No.
Name Lower Tank Assembly
30 13 30
TBEA Energy (India) Pvt. Ltd.
B 02 22-Feb-19 Revised as " 02 " Preetam Rinto Ashish Scale Page Size Mass (kg) Projection
T14135
10 1690 1690 10 01 06-Feb-19 Qty. of Item No. 12 revised Preetam Rinto Ashish "TBEA GREEN ENERGY PARK"
National Highway No.8, Material 0.025 A2 13355.3
00 06-Jan-19 First issue Preetam Rinto Ashish Village : Miyagam, Karjan,
C
SECTION A-A Rev. No. Date Description Prepared Checked Approved Gujarat - 391240. India Total Pages 2 Current Page 1
1 2 3 4 5 6 7 8
All dimensions are in millimeter unless otherwise specified.
1 2 3 4 5 6 7 8
5TY.384.20015.1 Technical Requirements:
01. Paint shall be same as painting procedure given by quality department.
02. For manufacturing instruction and Vacuum & Pressure test, refer final assembly drawing.
03. 200 NB pipe support shall be welded from vacuum block location to bottom plate before applying vacuum.
04. Outer Stopper shall be intermittent, 500mm long steel pieces shall be welded and 100mm space provided in
between two pieces. At the rim corners, stopper shall be blended with a suitable radius to maintain the
distance between stoppers.
9 05. After cutting the material; Burr & sharp edges must be grinded off & cleaned.
F 06. After welding, weld area shall be cleaned. F
47 07. Min R10 fillet must be provided inside of the tank. All sharp edges must be rounded. No sharp edges are
permitted inside of the tank.
08. Box stiffener shall be blasted cleaned & full painted from inside before its weld to tank wall.
23 09. For tolerances refer tolerance document ISO 2768 – 2.
10. Lifting bollard and Jacking pad welding shall be DP tested.
11. Earthing plate (drawing code; 8TY.552.S5001.001) welding dimensions can be varied and it shall be welded
17 on nearest rim locking hole and it shall be in-line with cover assembly earthing plate.
12. Ative part center lines shall be marked on rim at all four locations with yellow paint.
13. Matching surfaces of components which are made of SS material like earthing bosses and earthing pads
shall not be painted
27 14. Tapped holes shall be capped to avoid entering of paint in holes.
15. Holes shall be drilled in cover assembly rim matching to lower tank rim holes.
16. Refer drawing ''5TY.384.A5001.2RF'' for Roller mounting details
38 17. Before welding inside oil channels, it shall be shot blasted & painted from inside same as tank inside paint
and all channel shall be leak proof.
18. Jacking welding shall be unpainted and covered with protection tapes during transportation.
19. All weld/corners inside the tank shall be smoothly grinded to 10mm radius. All external edges of fabricated
items to be rounded to 3mm radius for better paint adhesion.
02 20. The location of 8TY.100.20015.860 is indicated in Neutral Earthing Arrangement of Final Assembly Drawing.
20
E E
11 53 8TY.576.20015.560 Earthing Nut 40 SS304 0.1 2.7
52 8TY.325.20015.501 Sludge Removal Flange 1 E250 2.8 2.8
51 8TY.310.T0300.3 CT Terminal Blanking Plate 1 E250 1.0 1.0
30 50 8TY.310.T0100.50 50NB-Cover Plate 1 E250 DN50 1.0 1.0
49 8TY.310.T0100.25 25NB-Cover Plate 10 E250 DN25 0.5 4.6
48 8TY.310.T0100.150 150NB-Cover Plate 2 E250 DN150 2.9 5.7
47 8TY.310.T0100.125 125NB-Cover Plate 1 E250 2.2 2.2
46 8TY.310.T0100.100 100NB-Cover Plate 1 E250 1.7 1.7
45 8TY.310.20015.534 Cover Plate 3 E250 3.7 11.1
44 8TY.310.20015.503 Sludge Removal Blanking 1 E250 0.3 0.3
43 8TY.130.20015.952 Gusset 12 E250 t= 20 1.1 12.7
15
42 8TY.130.20015.946 Gusset 1 E250 t= 32 6.4 6.4
3 41 8TY.130.20015.944 Gusset 1 E250 t= 32 1.3 1.3
40 8TY.130.20015.943 Gusset 1 E250 t= 32 19.0 19.0
D 39 8TY.130.20015.942 Gusset 1 E250 t= 32 36.5 36.5 D
41
38 8TY.130.20015.941 Gusset 1 E250 t= 32 22.2 22.2
37 8TY.130.20015.939 Gusset 1 E250 t= 32 9.0 9.0
37 36 8TY.130.20015.938 Gusset 1 E250 t= 32 13.6 13.6
35 8TY.130.20015.936 Gusset 1 E250 t= 32 11.1 11.1
18 34 8TY.130.20015.935 Gusset 2 E250 t= 32 10.0 20.1
33 31 33 8TY.130.20015.934 Gusset 4 E250 t= 32 16.0 64.1
6
22 32 8TY.130.20015.932 Gusset 4 E250 t= 32 14.2 56.7
34 28 31 8TY.130.20015.822 Box Stiffener 3 E250 26.7 80.1
35
36 30 8TY.130.20015.821 Box Stiffener 2 E250 98.5 197.0
43 16 53 12 25 26 2 14 24 5 29 29 8TY.130.20015.819 Box Stiffener 2 E250 92.3 184.6
28 8TY.130.20015.818 Box Stiffener 2 E250 73.2 146.4
27 8TY.130.20015.592 Gusset 1 E250 29.8 29.8
26 8TY.130.20015.513 Stiffening Plate 4 E250 t= 25 21.5 86.1
25 8TY.130.20015.512 Stiffening Plate 4 E250 t= 32 19.6 78.6
C 24 8TY.102.20015.500 Cup 4 Seamless Pipe OD=245, H=65, t=10 3.8 15.1 C
23 8TY.100.20015.860 Post insulator supporting 3 E250 t= 10 2.8 8.3
Bracket
22 8TY.100.20015.522 Plate 4 E250 28.1 112.5
21 8TY.064.20015.501 Earthing Pad 1 SS304 LxWxT= 160x80x16 1.5 1.5
20 8TY.059.20015.604 Base Plate for R&D Plate 6 E250 t= 6 0.7 4.0
19 8TY.059.20015.601 Base Plate (Name Plate) 1 E250 100 X 25 X 2 0.1 0.1
18 8TY.059.20015.501 Base Plate 1 E250 1620.0 1620.0
45
17 8TY.051.20015.531 N Side Wall 1 E250 224.6 224.6
16 8TY.051.20015.530 IV Side Bottom Wall 1 E250 207.6 207.6
15 8TY.013.20015.603 Cylinder Clamp 2 STEEL 0.7 1.5
14 5TY.793.20015.852 Magnetic Shield 1 CRGO 119.0 119.0
13 5TY.793.20015.851 Magnetic Shield 1 CRGO 92.0 92.0
Reproduction, use or disclosure to third parties without express authority is strictly forbidden.
Product Type
Drawing
A Code 5TY.384.20015.1 A
OSFSZ-100000/220TH
Indent No.
Name Lower Tank Assembly
TBEA Energy (India) Pvt. Ltd.
49 48 32 7 1 10 39 02 22-Feb-19 Revised as " 02 " Preetam Rinto Ashish Scale Page Size Mass (kg) Projection
T14135
01 06-Feb-19 Qty. of Item No. 12 revised Preetam Rinto Ashish "TBEA GREEN ENERGY PARK"
National Highway No.8, Material 0.035 A2 13355.3
00 07-Jan-19 First issue Preetam Rinto Ashish Village : Miyagam, Karjan,
C
Rev. No. Date Description Prepared Checked Approved Gujarat - 391240. India Total Pages 2 Current Page 2
1 2 3 4 5 6 7 8
All dimensions are in millimeter unless otherwise specified.