Professional Documents
Culture Documents
LSF400
LSF400
LSF400
www.indumart.com
SERIES: LSF400
INTRODUCTION SPECIFICATIONS
Indumart LSF400 Series of Vertical Magnetic Housing Material Aluminum die cast
Type Level Switches is designed to control Flange or Socket Stainless steel
liquid level in a vast variety of applications Float/ Rod / Spacer 316 stainless steel
including high temperature (up to 400°C) Enclosure Rating IP65 Weather Proof
and/or high pressure (up to 1000 psi) vessels Application Liquid level control
and boilers, waste water or clean water tanks,
Specific Gravity 0.75 minimum
chemical storage tanks, fuel oil or beverage
tanks, etc. Measuring Length Up to 1500 mm
Switching Differential 10 mm
Variations of liquid level in the tank would Maximum Pressure 1000 psi (70 bar)
cause vertical movement of the float. This Max. Operating Temp. 400°C (750°F)
movement translates into displacement of Output Switch 1 SPDT or 2 SPDT (DPDT);
permanent magnet connected to the floater Snap-action
shaft. Movement of the permanent magnet
Contact Rating 10A @ 250 VAC
causes the two other magnets to achieve
snap-action switching without mechanical Switch Housing Ceramic
connection. Cable Gland ½" or ¾" NPT
A variety of chambers may be used for side For chamber material and length options, please see the
connection, if the instrument should be CHAMBER SELECTION section.
connected to the side of the tank. Specifications may change without prior notice.
DIMENSIONS (mm) ORDER CODES
172
LSF400
106
SWITCH TYPE
1 SPDT 1
2 SPDT (DPDT) 2
200
WETTED PARTS
SS 304 1
SS 316 2
PROCESS CONNECTION
1" NPT Socket 1
ANSI 4" - 150# RF Flange 4
Internal Length
INTERNAL LENGTH
(Please specify)
200 200
1" SW 1½"
120
C to C 140
C to C
side - bottom
side - bottom (S. W.) (flange)