Professional Documents
Culture Documents
C311375 Book
C311375 Book
C311375 Book
Material Handler
✔ New feature
2
Operator Comfort Structures Work Tools
✔ The new cab provides maximum space, The structural components are the ✔ Orange peel grapples and rehandling
wider visibility and easy access to backbone of the machine's durability. clamshell buckets are offered
switches. The monitor is a full-color Caterpillar design and manufacturing to maximize performance of the
graphical display that allows the techniques assure outstanding durability 325D MH. pg. 8
operator to understand the machine and service life. Caterpillar booms and
information easily. pg. 6 sticks are large, welded box-section
structures with thick, multi-plate
fabrications that resist high stress. Service and Maintenance
Structures are stress relieved, thanks
Fast, easy service has been designed
to a heat treatment, to significantly
in with extended service intervals,
improve structures fatigue strength.
advanced filtration, convenient filter
Stick options allow you to pick the best
access and user-friendly electronic
match for your material handling job.
diagnostics for increased productivity
pg. 9
and reduced maintenance costs.
pg. 10
3
Engine
Built for power, reliability, economy and low emissions.
Meeting regulations... Exceeding expectations.
4
Hydraulics
The 325D MH hydraulic system is designed to handle the specific requirements
of the material handling industry.
5
Operator Station
Designed for simple, easy operation, high visibility and comfort,
the 325D MH allows the operator to focus on production.
Operator Station. The workstation is Hydraulic Activation Control Lever. touch action release system.
spacious, quiet and comfortable, assuring For added safety, this lever must be in The fixed front windshield is available
high productivity during a long workday. the operate position to activate the machine in standard duty laminated glass or
The air conditioner and attachment control functions. high impact resistant laminated glass.
switches are conveniently located on the
Controls. The 325D MH uses pilot Wiper. Designed to maximize visibility
right-hand wall, and the key switch and
operated control levers, positioned so that in poor weather conditions. The parallel
throttle dial are on the right-hand console.
the operator can operate with arms on the wiper system covers almost the complete
The monitor is easy to see and maximizes
armrests. The vertical stroke is longer than front window without leaving unwiped
visibility.
the horizontal, reducing operator fatigue. areas in the immediate line of sight of
Seat. An optional air suspension seat is The control lever grips are shaped to fit the operator.
available in the 325D MH. The standard into the operator’s hands. The horn switch
Cab Exterior. The exterior design uses
and optional seats provide a variety of and one-touch low idle switch are
thick steel tubing along the bottom
adjustments to suit the operator's size and positioned on the left and right grip.
perimeter of the cab, improving the
weight including fore/aft, height and
Implement Controls. Easy to handle resistance of fatigue and vibration.
weight. Wide adjustable armrests and
joysticks with integrated push buttons This design allows the FOGS to be
a retractable seat belt are also included.
and sliding switches control all implement bolted directly to the cab, enabling the
Climate Control. Positive filtered and swing functions. The sliding switches, machine to meet specifications and job
ventilation with a pressurized cab is designed to increase operator comfort and site requirements.
standard. Fresh air or re-circulated air reduce operator fatigue, provide modulated
can be selected with a switch on the control for tool rotation and cab elevating.
right console.
6
Electronic Control System
Manages the engine and hydraulics
for maximum performance.
7
Elevated Cab and Cab Acess
Hydraulic cab riser is available to maximize viewing to all sides of the machine.
HDHW Square
Boom 8400 mm
m3 Stick 5500 mm
0.62
0.7-0.78
Rehandling Clamshell Buckets GOS-35 1.05
1.26
1.46 N
0.5-0.6
GSM-35 0.8
Orange Peel Grapples 1.0 N Work tools have been calculated with machine in stability
(5 tines) 0.6
position; over-the-side and at maximum horizontal reach
GSH-20B 0.8
at approximately 2 meters above ground level. When
1.0 N choosing a work tool please consider work tool application,
0.6
Orange Peel Grapples productivity requirements and durability. Refer to work tool
GSH-20B 0.8
(4 tines) specifications for application recommendations and pro-
1.0
ductivity information. Check with your Cat dealer for more
Max. material density 3000 kg/m3 Max. material density 1200 kg/m3 details on specifications, sizes and other work tool types.
Max. material density 1800 kg/m3 N Not recommended
8
Structures
The 325D MH structural components are the backbone of the machine's durability.
Durable frames absorb stresses and provide excellent stability.
Efficient Design of Welded Box-section Structures. Strong and Stable Undercarriage. Two undercarriage options,
The design with thick, multi-plate fabrications in high stress long heavy duty high wide (HDHW) and long heavy duty high
areas allows structures to flex, dissipating stresses and square allow you to choose the best machine for your
maximizing strength. application and business needs. Both undercarriages provide
Finite element analysis is used in the determination of a high ground clearance and are equipped with full length track
structural stresses and enables optimization of weight, guiding guards. The diameter of the 325C MH idlers have been
durability and performance. increased on 325D MH to improve even more machine stability.
Internal baffle plates provide additional strength and
9
Service and Maintenance
Simplified service and maintenance save you time and money.
Air Filter Compartment. The air filter Diagnostics and Monitoring. Equipped
features a double-element construction with S•O•SSM sampling ports and hydraulic
for superior cleaning efficiency. test ports for the hydraulic system, engine
When the air cleaner plugs, a warning oil, and for coolant. A test connection for
is displayed on the monitor screen the Electronic Technician (ET) service tool
inside the cab. is located behind the cab.
Service. The design and layout was Anti-Skid Plate. Anti-skid plate covers
made with the service technician in top of and maintenance walkways and
mind. Many service locations are upper structure to prevent slipping during
easily accessible by ascending to maintenance.
the maintenance walkways allowing
Fan Guard. Engine radiator fan is
critical maintenance to get done
completely enclosed by fine wire mesh,
quickly and efficiently.
reducing the risk of an accident.
Pump Compartment. A service door
Greasing Points. Concentrated remote
on the right side of the upper structure
greasing blocks deliver grease to hard-to-
allows access to the pump and pilot
reach locations on the Material Handlers.
filter.
Radiator Compartment. The left rear
Extended Service Intervals. 325D MH Capsule Filter. The hydraulic return
service door allows easy access to the
service and maintenance intervals have filter, a capsule filter, is situated outside
engine radiator, oil cooler and air-to-air
been extended to reduce machine service the hydraulic tank. This filter prevents
aftercooler. Reserve tank and drain cock
time and increase machine availability. contaminants from entering the system
are attached to the radiator for simplified
when hydraulic oil is changed and keeps
maintenance.
the operation clean.
Purchase. Consider the financing options Product Support. You will find nearly
available as well as day-to-day operating all parts at our dealer parts counter.
costs. This is also the time to look at dealer Cat dealers utilize a worldwide
services that can be included in the cost of computer network to find in-stock
the machine to yield lower equipment parts to minimize machine downtime.
owning and operating costs over the long run. You can save money with Cat
remanufactured components.
Customer Support Agreements.
Cat dealers offer a variety of product Maintenance Services. Repair option
support agreements, and work with programs guarantee the cost of repairs
customers to develop a plan that best meets up front. Diagnostic programs such
Machine Selection. Make detailed specific needs. These plans can cover the as Scheduled Oil Sampling, Coolant
comparisons of the machines you entire machine, including attachments, to Sampling and Technical Analysis
are considering before you buy. help protect the customer’s investment. help you avoid unscheduled repairs.
What are the job requirements, machine
Operation. Improving operating techniques Replacement. Repair, rebuild or
attachments and operating hours?
can boost your profits. Your cat dealer has replace? Your Cat dealer can help
What production is needed? Your Cat
videotapes, literature and other ideas to help you evaluate the cost involved so
dealer can provide recommendations.
you increase productivity, and Caterpillar you can make the right choice.
offers certified operator training classes to
help maximize the return on your investment.
10
Engine Sound Levels
Cat C7 Engine with ACERT Technology Operator Sound. The operator sound level measured according
Net power at 1800 rpm to the procedures specified in ISO 6394:1998 is 76 dB(A),
ISO 9249 140 kW/190 hp for cab offered by Caterpillar, when properly installed and
maintained and tested with the doors and windows closed.
80/1269/EEC 140 kW/190 hp
Hearing protection may be needed when operating with an
Bore 110 mm open operator station and cab (when not properly maintained
Stroke 127 mm or doors/windows open) for extended periods or in noisy
Displacement 7.2 liters environment.
All engine horsepower (hp) are metric including front page. Exterior Sound. The labeled spectator sound power level
The C7 engine meets Stage IIIA emission requirements. measured according to the test procedures and conditions
Net power advertised is the power available at the flywheel specified in 2005/88/EC is 104 dB(A).
when the engine is equipped with fan, air cleaner, muffler,
and alternator.
Full engine net power up to 2300 m altitude
Cab
Cab/FOGS meets ISO 10262.
Hydraulic System
Main System
Maximum flow 2 x 235 l/min Brakes
Maximum pressure
Normal 350 bar Meets the standard ISO 10265:1998
Heavy lift 360 bar
Travel 350 bar
Swing 275 bar
Pilot System Service Refill Capacities
Maximum flow 32.4 l/min
Maximum pressure 39 bar Liter
Fuel tank capacity 500
Cooling system 30
Engine oil 30
Drive Swing drive 10
Final drive 6
Maximum travel speed 5.3 km/h Hydraulic system (including tank) 310
Drawbar pull 244 kN Hydraulic tank 145
325D MH specifications 11
Dimensions
All dimensions are approximate.
F K
B
B
M
G
E L
D C
A
HDHW Square
mm mm
Boom length 8400 8400
Stick length 5500 5500
A Overall length
with boom and stick installed 11 640 11 640
with boom without stick 11 445 11 445
B Overall height
without boom and stick J
(at hydraulic cab riser) 3445 3445
with boom and stick 3545 3545
C Overall width
with 800 mm triple grouser shoes 3720 4195
with platform 4024 4024
D Track length 4860 4860
E Length to center of rollers 3990 3990
F Tail swing radius 3080 3080
G Ground clearance 695 645
J Cab height 3270 3270
with FOGS 3400 3400
with raised cab, without FOGS 5860 5860
with raised cab and FOGS 5990 5990
K Upper structure width 2900 2900
L Track gauge 2920 3395
M Counterweight ground clearance 1295 1245
12 325D MH specifications
Working Ranges and Lift Capacities
Material handling front parts (no work tool) with Heavy Duty High Wide (HDHW) undercarriage
and Square undercarriage.
m
14 Boom 8400 mm
13
Stick 5500 mm
12
Shoes (triple grouser) 800 mm
11
10
Counterweight 7700 kg
9 A Maximum horizontal reach at ground level 13 030 mm
8 B Maximum vertical pin depth 6070 mm
7
C C Maximum vertical pin height 13 390 mm
6
5 The range is applicable in 360°, and dependent on maximum
4 weight of work tool.
3
2
1
0
1
2
A
3
B
4
5
6
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
325D MH specifications 15
325D MH Material Handler