Professional Documents
Culture Documents
Bolt Threading Machine PDF
Bolt Threading Machine PDF
IO N A L
ROFESS
SA DA P alog
A uipmen
t s C a t
bing Eq
Plum
Head Office
2
Asada Machinery Co.,Ltd.
Quality
To help people’s lives and
the environment
Inuyama Factory
Technologies that are proven and needed by people all over the world
ASADA has developed leading technologies employ technologies like plasma decomposition activities they promote in the field.
in water and gas leak - prevention as well or electrostatic separation methods have been Currently, many employees working at our
as refrigerant recovery, reclamation and highly valued by users all over the world. plants have achieved the engineering technician
decomposition. We develop and produce ASADA believes that technological improvements qualification. For technologically advanced
these technologies and products in factories can only come from investment in human products, it is now the beginning of a new era in
at Inuyama and Matsuzaka, Japan and resource development. manufacturing in which we manufacture only the
Bangkok, Thailand. Pipe threading machines Manufacturing is based on Science, Technology necessary amount of high quality products while
that produce no - leak threads, pipe cutting and most importantly on Workmanship. paying the utmost attention to detail. At Asada,
machines that are portable and easy to carry We encourage all our people to become qualified we will continue to pursue the highest quality as
onto worksites, and refrigerant recovery, as engineering technicians so that they can fully we truly welcome and enjoy the new methods of
reclamation and decomposition machines that understand and take pride in the manufacturing manufacturing.
3
We will continue to challenge high hurdles in order to create
new fundamental technologies that will support ASADA in the 21st century.
4
Global model / Pipe Threading Machine Pioneer of portable band saw / Band Saw Innovation
Establish new fundamental technologies
and contribute to social environments
Received the
World - class high speed operation / “ Ozone Layer Protection Award ” from U.S.
Plasma technology / CFC Decompsition Device Refrigerant Recovery Machine Environmental Protection Agency
In 1999, in collaboration with Tsukuba University, ( METI of Japan). hurdles, and as a result, we have been able to
we established the Plasma Research Group to Based on the project, we completed a small - make a positive social contribution and earn
promote the research and development of a size CFC decomposition device, the Plasma X, high social credibility as well as accumulate
Portable Fluorocarbon Decomposition Device. and started production of the device in August advanced technical expertise.
The outcome of this cooperation in cooperation 2008. In this way, both in name and in reality, Asada
with other agencies was the Portable CFC In June 2010, we had another project chosen has been able to complete a product range
Decomposition Device FA -1500. by METI in their efforts to encourage the new covering the whole field of the “ recovery ”,
This new technology was showcased at REGTE technology - a project for the Development of “ recycling” and “ decomposition” of CFCs
2001 at the Tokyo International Forum. a High Speed CFC Recovery Device Prototype based on advanced technologies, and we have
In 2004, our proposal to develop an on - site, with a High Recovery Rate. become the only manufacturer in the world that
low - cost CFC Destruction Device was selected By winning public development projects, we can provide this complete product line - up.
by the Ministry of Economy, Trade and Industry have been able to overcome high technological
5
Cooperation with you across the borders makes the world better
6
Globalization
Responding to the demands of the present
age with an outward-looking perspective
We are contributing to development in the emerging accounts for half of the world markets.
countries, especially in Asia. In the countries As the only manufacturer who has fluorocarbon
surrounding our factory, Asada Machinery in Thailand, handling equipment encompassing all aspects of
we have sales subsidiaries in Thailand, Taiwan, recovery, reclaim and decomposition, we continue
Malaysia, China and Vietnam. to lead the way to protect the environment in Asia
And, in 2013, our sales subsidiary in India was added and carry out our mission to use the latest and best
to the ASADA Network. technologies to manufacture the best equipment.
Through the Asada Network, we strive to supply high
quality plumbing machines and tools to support the
infrastructure development, especially in Asia, which
7
CONTENTS
Pipe & Bolt Threading Machine, Die – Head, Dies,
Threading Gauge, Nipple Max, Nipple Chuck,
THREADING MACHINES Threading Oil, Pipe Support, Seal Tape,
9
Pipe Bender, Tap & Dies
PLUMBING MACHINES
Band Saw, Pipe Saw,
& CUTTING MACHINES Band Saw Blade, Pipe Saw Blade
25
TOOLS
PLASMA CUTTING
Air Plasma Cutting Machine, Back Sield,
& PLASMA CUTTING &
Angle Machine, Pipe Jack, 41
WELDING WELDING MAKE - UP TOOLS Tack Weld Centering Equipments
MAKE - UP TOOLS
LIFT
& HOISTS & LIFTS Max – Jax, Beam – Jax, Hoist, Upper 55
TRANSFER
CLEANER,
PIPE INSPECTION CAMERAS,
PIPE CLEANING, INDUSTRIAL ENDOSCOPES
Clear Scope, Accessories 71
MAINTENANCE
8
THREADING MACHINES
PLUMBING MACHINES & TOOLS
320mm
Die - Head & Dies
■ Die - Head equipped with
automatic profiling system
and desighed to reduce cut
317mm
resistance for precise 400mm
threads.
Dies made of special pre -
heat treated steel, ensuring
long life and easy threading. Weight Spindle Speed Motor Standard Accessories
CUTTING MACHINES
Spindle support
■ Spindle is supported by Powerful motor 1140W !!
Sealed Ball Bearing,
ensuring correct alignment
and continued accuracy
through lack of wear.
480mm
680mm
Cutting oil pump
■ The high capacity of Gear
Item Weight Spindle Speed Motor Standard Accessories
Pump operates even at low
Manual Die - Head : 1/2 ~ 2", 2 ~ 3"
revolutions to assure
80 1,140W Dies : BE 1/2 ~ 3/4" • BE 1 ~ 11/2" (2"), PT 2 ~ 3"
precise threads. Threading Oil White 4L (1can)
voltage
74kg 33min−1
made to Beaver Auto Die - Head : 1/2 ~ 2" • 21/2 ~ 3"
80AT order Dies : BE 1/2 ~ 3/4" • BE 1 ~ 11/2" (2"), AT 21/2 ~ 3"
Threading Oil White 4L (1can)
10
PLUMBING MACHINES & TOOLS
For Water, Gas, Electricity Pipe, and Bolt threading
Main Applicable Die - Heads
Beaver 50
50 : Code No.BE511 50AT : Code No.BE5AT Beaver Auto Type
Manual Type
Item Code No. Applicable Model
BSPT 1/4 ~ 3/8" • BSW 3/8 ~ 1" AS109 Beaver 25
THREADING MACHINES
BSPT 1/4 ~ 3/8" • BSW 3/8 ~ 1" 20114 Beaver 50 • 80 • 100
BSPT / NPT 1/2 ~ 2" 63090 Beaver 50 • 80 • 100
BSPT 21/2 ~ 3"・NPT 2 ~ 3" 20127 Beaver 50 • 80 • 100
BSPT 31/2 ~ 4" 04110 Beaver 50 • 80 • 100
340mm
CUTTING MACHINES
Manual Die - Head : 1/2 ~ 2" BSPT 21/2 ~ 4" 59803 Beaver 50 • 80 • 100
50 Dies : BE 1/2 ~ 3/4" • BE 1 ~ 11/2" (2") NPT 1/2 ~ 3/4" AS120 Beaver 25
750W Threading oil White 4L (1can) NPT 1 ~ 11/2" AS121 Beaver 25
44kg 40min−1 voltage NPT 1/2 ~ 3/4" 89101 Beaver 50 • 80 • 100
made to order Beaver Auto Die - Head : 1/2 ~ 2"
50AT Dies : BE 1/2 ~ 3/4" • BE 1 ~ 11/2" (2")
NPT 1 ~ 2" 89102 Beaver 50 • 80 • 100
Threading Oil White 4L (1can)
NPT 21/2 ~ 3" 89245 Beaver 50 • 80 • 100
NPT 21/2 ~ 4" 59912 Beaver 50 • 80 • 100
Manual
For Water, Gas, Electricity Pipe, and Bolt threading. Item Code No. Applicable Model
BSPT 1/4 ~ 3/8" 89046
Beaver 100 BSPT 1/2 ~ 3/4" 89266
Beaver 25 • 50 • 80 • 100
Beaver 50 • 80 • 100
Code No.BE1AT BSPT 1 ~ 2" 89267 Beaver 50 • 80 • 100
BSPT 2 ~ 3" 89051 Beaver 50 • 80 • 100
~
Optional Water / Gas pipe : 1/4 ~ 3/8" BSPT 31/2 ~ 4" 89052 Beaver 50 • 80 • 100
1/4" ~ 4" item
Bolt : 3/8 2" • 10 ~ 36mm
NPT 1/4 ~ 3/8" 89100 Beaver 25 • 50 • 80 • 100
Conduit : 19 ~ 75mm • 1/2 ~ 3"
TEST PUMPS
NPT 1/2 ~ 3/4" 89101 Beaver 50 • 80 • 100
NPT 1 ~ 2" 89102 Beaver 50 • 80 • 100
2 stage speed system helps to cut off any sizes of pipes !! NPT 21/2 ~ 3" 89258 Beaver 50 • 80 • 100
NPT 31/2 ~ 4" 89105 Beaver 50 • 80 • 100
14mm 18mm
Beaver 25 others
Carbon Brushes
For pipe threading machine motors.
570mm
790mm
11
PLUMBING MACHINES & TOOLS
Right : 8 ~ 24m
5/16" ~ 1"
UNC / UNF
5/8" 89317
Supermatic 2000
Code No.SM207
736mm
12
PLUMBING MACHINES & TOOLS
For on - site repairs and threading in confined spaces
Supertronic 2
Code No.ST504
Suitable for on - site pipe threading and repairing pipes in a limited work space.
For steel pipe. (Not applicable to Outer Lined pipes)
THREADING MACHINES
Motor
Easy to install / uninstall High Power without loud
Die - Heads (1/4" ~ 11/4"). noise. LONG SELLER !!
900W Die - Head with Dies (1/2" • 3/4" • 1" • 11/4" • 11/2" • 2")
7.2kg 25min−1 Voltage Pipe Grip, Adaptor (1/4 ~ 11/4")
made to order Threading oil White (0.3L), Carrying Case
CUTTING MACHINES
Die - Head with Dies 140mm
4 Dies set.
95mm 580mm
Die - Head
BSPT 3/8" R70822 Die - Head
BSPT 11/4" R70826
with Dies with Dies
BSPT 1/2" R70823 BSPT 11/2" R70842
BSPT 3/4" R70824 BSPT 2" R70843
※ Depth of threads is not adjustable.
TEST PUMPS
※ Supplying only Die - Head with Dies set.
Standard
Die - Head with Dies (1/2" • 3/4"), Ratchet handle, Carrying Case
Accessories
100mm
13
PLUMBING MACHINES & TOOLS
Die - Head
THREADING MACHINES
16 ~ 25mm AS134 ● ●
ISO Metric
16 ~ 32mm 63094 ● ● ●
14
PLUMBING MACHINES & TOOLS
For Bolt Threading Machine
Die - Head
THREADING MACHINES
Bolt Machine 25Pro / No.1 (Right) Bolt Machine 25Pro / No.1 (Left) ※2 Bolt Machine No.2 (Right) Bolt Machine No.2 (Left)
CUTTING MACHINES
UNC / UNF ●
※1 Die - Heads for Bolt Machine No.2 will be discontinued after current stocks run out.
※2 Left thread special model is required to use Left Die - Heads with Bolt Machine 25Pro.
Die - Head
TEST PUMPS
For Conduit Thread BSPS (C) 11/2 ~ 3" : C51 ~ 75mm 33114 ●
※ Die - Heads for Mini - Con will be discontinued after current stocks run out.
15
PLUMBING MACHINES & TOOLS
Dies
For Taper Pipe Thread (Beaver, Astronic, Piset, Mini - Con)
Standard Size Code No. Material T.P.I. Suitable Die - Head Standard Size Code No. Material T.P.I. Suitable Die - Head
AM1/2 ~ 3/4" AS086 14 Beaver Auto
AM1/2 ~ 3/4" AS120 14 Beaver Auto
Alloy Alloy (Beaver25, AS1, 1.5)
(Beaver25, AS1, 1.5) AM1 ~ 11/2" AS121 11.5
AM1 ~ 11/2" AS087 11
AM1/2 ~ 3/4" AS111 14
M / AT1/2 ~ 3/4" 89101 14
Beaver Auto
HSS (Beaver25, AS1, 1.5) M / AT1 ~ 2" 89102 11.5
AM1 ~ 11/2" AS112 11
AT21/2 ~ 3" 89245 8 Beaver Auto
BE1/2 ~ 3/4" 89266 14 Alloy (Beaver, Astronic)
AT21/2 ~ 4" 59912 8
BE1 ~ 2" 89267 11
AT31/2 ~ 4" 89246 8
M / AT1/2 ~ 3/4" 89211 14 AT5 ~ 6" 89247 8
THREADING MACHINES
1 ~ 11/2" 89248 11 BSPS 1/2 ~ 3/4" Type RD 89280 14 Type RD Die - Head
HSS Manual (BSPP) 1/2" Type RD 89281 11 (Manual)
11/2 ~ 2" 89056 11
2 ~ 3" 89142 11
Economical Dies
31/2 ~ 4" 89184 11
Standard Size Code No. Type T.P.I. Suitable Die-Head
1/2 ~ 3/4" Mini - Con 89036 14
Alloy Mini - Con 82, 104 M/AT1/2-3/4" 89283 14
BSPT
1 ~ 11/4" Mini - Con 89037 11 M/AT1-2" 89284 11 Beaver Auto,
Eco
AT1/2 ~ 3/4" (For Steel Pipe) 89255 14 Auto M/AT1/2-3/4" 89285 14 Manual
HSS (Beaver, Astronic, Supermatic) NPT
AT1 ~ 2" (For Steel Pipe) 89256 11 M/AT1-2" 89286 11.5
For Parallel Pipe (Condit) Thread (Beaver, Astronic, Piset, Mini - Con)
Standard Size Code No. Material T.P.I. Suitable Die - Head Standard Size Code No. Material T.P.I. Suitable Die - Head
19 ~ 25mm 89021 16
Mini - Con, 1/2 ~ 3/4" 89148 14
C 31 ~ 39mm 89022 Alloy 16 For Conduit (Manual)
Mini - Con,
(0.25kgs) 1 ~ 11/4" 89149 11.5
51 ~ 75mm 89023 16 For Conduit (Manual)
11/2 ~ 2" 89150 11.5 (0.25kgs)
NPSM Alloy
Standard Size Code No. Material T.P.I. Suitable Die - Head 21/2 ~ 3" 89151 8
1/2 ~ 3/4" 89024 14 31/2 ~ 4" 89152 8 Mini - Con 104 (0.25kgs)
1 ~ 11/4" 89025 11 Mini - Con,
Alloy For Conduit (Manual) 31/2 ~ 4" 89272 8 Manual (04110)(0.7kgs)
11/2 ~ 2" 89026 11 (0.25kgs)
21/2 ~ 3" 89027 11
Standard Size Code No. Material T.P.I. Suitable Die - Head
BSPS 31/2 ~ 4" 89145 Alloy 11 Mini - Con 104 (0.25kgs)
(BSPP) 16 ~ 20mm 89110 1.5mm For Conduit
31/2 ~ 4" (LARGE) 89071 Alloy 11 For Conduit (Manual) (0.7kgs)
25 ~ 32mm 89111 1.5mm (Manual) (0.6kgs)
1/2 ~ 3/4" 89259 14
Metric
Mini - Con, Alloy Auto (Beaver25, AS1, 1.5)
1 ~ 11/4" 89260 11 Conduit 16 ~ 32mm 89208 1.5mm
HSS For Conduit (Manual) Mini - Con 82 (0.25kgs)
11/2 ~ 2" 89261 11 (0.25kgs)
21/2 ~ 3" 89262 11 40 ~ 63mm 89209 1.5mm Mini - Con 82 (0.25kgs)
16
PLUMBING MACHINES & TOOLS
Dies
For Bolt Thread (Beaver, Astronic, Piset, Mini - Con, Bolt Machine)
Standard Size Code No. Material T.P.I. Suitable Die - Head Standard Size Code No. Material T.P.I. Suitable Die - Head
5/16" 89079 Alloy 18 No.1, Mini - Con 8mm 89001 Alloy 1.25mm 25Pro, No.1, Mini - Con
3/8" 89080 16 10mm 89002 1.5mm
1/2" 89081 12 12mm 89003 1.75mm
25Pro 25Pro
5/8" 89082 11 14 ~ 16mm 89140 Alloy 2mm No.1
Alloy No.1
3/4" 89083 10 For Bolt (Manual) For Bolt (Manual)
18 ~ 22mm 89141 2.5mm
7/8" 89084 9
24mm 89009 3mm
1" 89085 8
27mm 89192 3mm
11/8 ~ 11/4" 89143 7
THREADING MACHINES
30 ~ 33mm 89193 3.5mm
13/8 ~ 11/2" 89144 6 Alloy For Bolt (Manual)
Alloy For Bolt (Manual) 36mm 89194 4mm
15/8 ~ 13/4" 89199 5
17/8 ~ 2" 89200 4.5
42mm 89234 4.5mm
CUTTING MACHINES
1/2" 89292 12 Alloy For Bolt (Manual)
25Pro Left 36mm 89232 4mm
5/8" 89293 N - Alloy 11 No.1
For Bolt (Manual) Left 42mm 89233 4.5mm
3/4" 89294 10
BSW Metric 8mm 89302 1.25mm
7/8" 89295 9
10mm 89303 1.5mm
1" 89296 8
12mm 89304 1.75mm 25Pro
5/16" 18503 HSS 18 No.1, Mini - Con N - Alloy No.1
3/8" 18504 16
14 ~ 16mm 89305 2mm For Bolt (Manual)
TEST PUMPS
11/8 ~ 11/4" 18510 7 No.2
HSS No.2
14 ~ 16mm 18538 HSS 2mm
Min - Con
13/8 ~ 11/2" 18512 6 18 ~ 22mm 18539 2.5mm For Bolt (Manual)
11/8 ~ 11/4" 89225 7
24mm 18530 3mm
13/8 ~ 11/2" 89226 HSS 6 For Bolt (Manual)
27mm 18531 3mm
15/8 ~ 13/4" 89275 5
30 ~ 33mm 18532 HSS 3.5mm No.2
Left 3/8" 18513 16
36mm 18534 4mm
Left 1/2" 18514 12
Left 8mm 18556 1.25mm
Left 5/8" 18515 11 No.1
HSS Left 10mm 18541 1.5mm
Left 3/4" 18516 10 No.2
Standard Size Code No. Material T.P.I. Suitable Die - Head Standard Size Code No. Material T.P.I. Suitable Die - Head
5/16" 89137 18 3/4" 89318 10
25Pro
3/8" 89015 16 UNC 7/8" 89319 N - Alloy 9 No.1
For Bolt (Manual)
7/16" 89138 14 1" 89320 8
1/2" 89016 13 25Pro 11/4" 18536 7
No.1 UNC HSS No.2
UNC 9/16" 89139 Alloy 12
No.2
11/2" 18537 6
5/8" 89017 11 For Bolt (Manual)
3/4" 89018 10 Standard Size Code No. Material T.P.I. Suitable Die - Head
7/8" 89019 9 3/8" 89038 24
1" 89020 8 7/16" 89039 20
11/8 ~ 11/4" 89197 7 1/2" 89040 20
UNC Alloy For Bolt (Manual) 25Pro
13/8 ~ 11/2" 89198 6 9/16" 89041 18 No.1
UNF Alloy
5/16" 89312 18 5/8" 89042 18 No.2
For Bolt (Manual)
3/8" 89313 16 25Pro 3/4" 89043 16
UNC N - Alloy No.1
1/2" 89315 13 For Bolt (Manual) 7/8" 89044 14
5/8" 89317 11 1" 89045 12
17
PLUMBING MACHINES & TOOLS
Taper Thread Gauge Set 1/2" ~ 1" Taper Thread Gauge(1/2" • 3/4" • 1"), Case
Taper Thread Gauge Set 1/2" ~ 2" Taper Thread Gauge (1/2" • 3/4" • 1" • 11/4" • 11/2" • 2"), Case
THREADING MACHINES
Code No.36003
Easy set up! Just hold in chuck of threading machine to make small nipples.
※ Not applicable to Out - side lining pipes.
Can be used in all brands of threading machines.
Nipple Max
Size Code No. Size Code No.
1/2" 36100 2" 36150
3/4" 36110 21/2" 36160
1" 36120 3" 36170
11/4" 36130 31/2" 36180
11/2" 36140 4" 36190
Nipple Chuck
BSPT : Code No.01810 NPT : Code No.01850
Easy operation – Nipple will not jam in chuck for release after threading the nipple.
Can be used in all brands of threading machines.
Not available for Astronic 1 and Beaver 25.
Set Accessories Cap (1/2" • 3/4" • 1" • 11/4" • 11/2" • 2"), Handle, Shaft, Case
18
PLUMBING MACHINES & TOOLS
For Water Pipes
MSDS
longer life of the dies !! Meets the specification JWWA K137 of Japan Water Supply Association.
Ideal for water supply pipe.
Asada Water washable oil which can be washed out easily after threading works.
Sharp cutting without distortions. ※ Old oil causes a bad thread.
Threading Oil
Applicable to Stainless steel pipes.
THREADING MACHINES
0.3L 4L 16L
※ 6cans / lot
CUTTING MACHINES
Threading Oil : RED
4L : Code No.85628 16L : Code No.85641
MSDS
TEST PUMPS
Right time to change the oil
① When oil goes white because of water contamination.
② When fine swarf of pipes is mixed with oil excessively.
③ When oil goes dark because of age & use.
4L 16L
Low quality oil affects life of Dies and ※ 6cans / lot
MSDS
More economical threading oil ideal for pipe & bolt threading machines.
Reduce cutting resistance and increase dies life.
Cools threads and pipe during operation.
Improves thread quality.
4L 16L
19
PLUMBING MACHINES & TOOLS
Pipe Support
For Beaver 25 For Beaver 50 • 80 • 100, Astronic, Piset40 • 60 For Mini - Con PIPE JACK BALL H
PAT.
Seal Tape
CUTTING MACHINES
MSDS
For airtight connection
To seal steel, aluminum, stainless, and plastic pipes – 100 ~ 230°C.
For smooth installation and uninstallation.
※ Can't be used for Alkali fusion steel and Chlorine trifluoride.
TEST PUMPS
Quantity 500
Bender 50 Eco
Code No.HB002
Hydraulic Bender.
Easy to move on casters. Complete set !!
Output 16t
Degree of bending 90° / Bend Radius R : 4DR (all sizes)
Cylinder Stroke 240mm
Weight 44.5kg 330mm
Standard Accessories bend adapter : 1/2" • 3/4" • 1" • 11/4" • 11/2" • 2"
Size Bend Radius R Code No. Size Bend Radius R Code No.
1/2" 87 HB0231 11/4" 171 HB0234
3/4" 109 HB0232 11/2" 195 HB0235
1" 136 HB0233 2" 242 HB0236
20
PLUMBING MACHINES & TOOLS
Tungsten Steel (SKS)
Hand Taps
Asada Taps are made of high quality materials and
excellent craftsmanship.
Manufactured from tough Tungsten Steel (SKS).
THREADING MACHINES
Nominal Length Shank Diameter
Pitch Metric (60°) (C)
Diameter Overall (A) Thread (B)
CUTTING MACHINES
1.7 mm 0.35 mm 36 mm 13 mm 3 mm
2 mm 0.4 mm 40 mm 15 mm 3 mm
2.3 mm 0.4 mm 42 mm 15 mm 3 mm
2.5 mm 0.45 mm 44 mm 16 mm 3 mm
2.6 mm 0.45 mm 44 mm 16 mm 3 mm
3 mm 0.5 mm 0.6 mm 46 mm 18 mm 4 mm
C
3.5 mm 0.6 mm 48 mm 18 mm 4 mm
B
A 4 mm 0.7 mm 0.75 mm 0.5 mm 52 mm 20 mm 5 mm
4.5 mm 0.75 mm 0.5 mm 55 mm 20 mm 5 mm
5 mm 0.8 mm 0.9 mm 0.5 mm 60 mm 22 mm 5.5 mm
5.5 mm 0.9 mm 60 mm 22 mm 5.5 mm
TEST PUMPS
6 mm 1 mm 0.75 mm 0.5 mm 62 mm 24 mm 6 mm
7 mm 1 mm 0.75 mm 65 mm 26 mm 6.2 mm
8 mm 1.25 mm 1 mm 0.75 mm 70 mm 30 mm 6.2 mm
9 mm 1.25 mm 1 mm 0.75 mm 72 mm 30 mm 7 mm
10 mm 1.5 mm 1.25 mm 1 mm 0.75 mm 75 mm 32 mm 7 mm
11 mm 1.5 mm 1.25 mm 80 mm 38 mm 8 mm
12 mm 1.75 mm 1.5 mm 1.25 mm 1 mm 82 mm 38 mm 8.5 mm
C
21
PLUMBING MACHINES & TOOLS
Hand Taps
THREADING MACHINES
Length Length
Nominal Nominal Diameter Shank
Nominal Diameter BA Shank Diameter (C)
Overall (A) Thread (B) Diameter Brass (55°) Overall (A) Thread (B) Diameter (C)
22
PLUMBING MACHINES & TOOLS
Tungsten Steel (SKS)
Hand Taps
T. P. I Length
Pipe Taps Nominal
Diameter BSPT (55°) BSP (PF) Overall (A) Threada (B)
Shank
Diameter (C)
THREADING MACHINES
7/8" 14 14 90mm 40mm 24mm
CUTTING MACHINES
Diameter (C)
C
TEST PUMPS
2" 111/2 111/2 120mm 50mm 40mm
Dies
A
B
23
PLUMBING MACHINES & TOOLS
E E
B D C B D C
A A
Length Shank
Nominal Prepared
Pitch Shaft before groove Diameter
Diameter Overall (A) Thread (B) Shaft (D) (C) Hole
(E)
24
CUTTING MACHINES
PLUMBING MACHINES & TOOLS
For cutting steel pipes, H steel, square pipes, and round bars
SERIES Easy to replace the saw blades from the front side.
For cutting steel pipes, H steel, square pipes, and round bars
Code No.BB003
Bundle Cut (Chain Vise)
Steel Pipe : ~ø180mm (6") Chain Vise Over - Load Protector
■ Can cut a bundle of same
materials. Precise right angle cutting at high speed.
Band Saw Beaver 4 Eco Easy to replace the saw blade from the front side.
Band Saw Beaver 6 Can cut a bundle of same material.
Band Saw 222
Higher durability with strain prevention rib !!
26
PLUMBING MACHINES & TOOLS
For cutting steel pipes, H steel, square pipes, and round bars
Band Saw Blade
Band Saw Beaver 4F Eco ※ More in detail on P31.
Code No.BB40F
Angle Cut
Steel Pipe : ~ø120mm (4") Flat Vise Over - Load Protector
(until 45°)
SK 8 TPI 70078 10
THREADING MACHINES
SK 10 TPI 88916 10
SK 14 TPI 88887 10
SK 24 TPI 88888 10
SK 32 TPI 71069 10
CUTTING MACHINES
HSS 18 TPI 70603 5
Steel pipe 90° : ø120mm (4") 45° : ø50mm (2") HSS 24 TPI 70413 5
Cutting H - Beam 90° : 100mm × 100mm
Capacity Square pipe 90° : □100mm 45° : □50mm
GRIT SAW 70141 5
SK 10 TPI 70121 10
For cutting steel, H steel, square, and round pipes
SK 14 TPI 70110 10
Band Saw Beaver 6F SK 18 TPI 70111 10
TEST PUMPS
Code No.BB103
SK 24 TPI 70112 10
Angle Cut
Steel Pipe : ~ø180mm (6") Flat Vise Over - Load Protector HSS 8 TPI 70133 5
(until 45°)
HSS 10 TPI 70113 5
Precise right angle cutting at high speed.
Easy to replace the saw blade from the front side. HSS 14 TPI 70114 5
Quick clamp system helps to set pipes quickly.
HSS 18 TPI 70602 5
Quick clamp system helps to set up material quickly !! HSS 24 TPI 70257 5
415mm
Pipe support for Band Saw
Necessary for vertical cutting of large - diameter and long pipes.
415mm 975mm
27
PLUMBING MACHINES & TOOLS
For cutting steel pipes, H steel, square pipes, and round bars For cutting steel pipes, H steel, square pipes, and round bars
Steel Pipe : ~ø220mm (8") Chain Vise Steel Pipe : ~ø220mm (8") Flat Vise Angle Cut (until 45°)
Simple to replace saw blade with New Tension Handle. Simple to replace saw blade with New Tension Handle.
Frame falling down protection system assures safe work. Frame falling down protection system assures safe work.
Quick clamp system helps to set a material quickly.
Ideal for cutting at right angle !! Dry cutting without coolant ! Ideal machine for site job !!
THREADING MACHINES
500mm
500mm
360mm
1,050mm 360mm 1,060mm
CUTTING MACHINES
Steel pipe ø220mm (8") Steel pipe 90° : ø220mm (8") 45° : ø115mm (4")
Cutting H - Beam 200mm × 150mm Cutting H - Beam 90° : 200mm × 150mm 45° : 125mm × 125mm
Capacity Square pipe □175mm Capacity Square pipe 90° : □175mm 45° : □125mm
Round bar ø100mm Round bar 90° : ø100mm 45° : ø100mm
Weight 53kg Weight 62kg
Motor 100 – 120V, 220 – 240V • 250W ※ Voltage made to order Motor 100 – 120V, 220 – 240V • 250W ※ Voltage made to order
Standard Accessories 14 TPI HSS (1pce) : Code No.70446 Standard Accessories 14 TPI HSS (1pce) : Code No.70446
※ More in detail about blades on P31. ※ More in detail about blades on P31.
For cutting steel pipes, H steel, square pipes, and round bars For cutting large diameter and long pipes at right angle
Steel Pipe : ~ø320mm (12") Flat Vise Angle Cut (until 45°)
Oil dumper system makes it possible to cut at right angle of large diameter pipe.
640mm
For cutting large diameter and long pipes at right angle
620mm
1,530mm
28
PLUMBING MACHINES & TOOLS
For cutting building and electronic materials
~ø63.5mm
Easy to cut with one hand, □ 56mm × 63.5mm
18V lithium ion battery Weight : 3.5kg
THREADING MACHINES
conduit, electric wire cable, C channel, handrail,
aluminum sash, steel pipe, HVAC drain pipe, etc
Revolution of rechargeable band saw !!
Small sized
■ 3.5kg with a battery.
190mm
CUTTING MACHINES
Motor
■ Powerful cutting with 18V
lithium ion battery and strong
DC motor.
350mm
Tension handle
■ Easy blade setting by 185mm
one - touch - t ension system.
TEST PUMPS
Cutting Capacity ~ø63.5mm (※), □56mm × 63.5mm
Numbers of cuts with Steel pipe ø48.6mm / thickness 3.5mm : 20cuts
Handle charged battery Steel conduit ø38.1mm / thickness 1.6mm : 90cuts
■ Easy to work with a handle Weight 3.5kg (machine 2.8kg / battery 0.7kg)
grip. Battery 18V lithium ion battery 2.6Ah
14 / 18 TPI (cobalt) 1 PCE : Code No.71044,
Standard Accessories 18V lithium ion battery (1 pce), Side handle, Battery charger,
Strage case
※ When cutting over ø56mm pipe, cut the pipe with rotating.
Battery
■ 18V lithium ion battery can
be preserved for a long time. Side handle Strage case
And additional charging is
possible.
29
PLUMBING MACHINES & TOOLS
Asada Band Saw Blades adopt the most Band Saw Blades
suitable type of tooth set for Asada Band
Saw.
Cut at right angles,
at high speed,
with long life !!
Saw Blades for
THREADING MACHINES
Band Saw
Ideal for cutting steel pipes
(SK Saw Blade)
■ Ideal for cutting steel pipe and
geometrical steel.
Multipurpose saw blade economizes
on cost.
CUTTING MACHINES
2 When installing a new blade, set the “precision cutting adjustment device” to
“ 1 ” and cut one or two times to settle in the new blade.
Q&A
Relation between cutting
Q What is " Tooth Set " ? Q “ What is TPI? Q materials and pitch ?
" Tooth Set " is a structure of Saw Blade Teeth TPI is the number of teeth per inch. An example of 14 TPI saw blade
A which alternately protrudes to the left and right A (25.4mm) A 25.4mm / 14 tips = 1.8mm. (pitch)
beyond the Saw Blade body in order to reduce In this case, if one uses a saw blade
the frictional resistance between saw blade and of pitch under 1.8mm, cutting chips
cutting materials to minimum. It also helps to 1 inch (25.4mm) may attach to the space between
take chips and dust out easily. tips that may cause teeth to break.
(25.4mm÷14 tips)=pitch 1.81mm
Asada band Saw Blades use a raker tooth set
which are the most suitable type for our Band
Saws.
14 TPI
Raker tooth set
30
PLUMBING MACHINES & TOOLS
Blades for Band Saw
Band Saw Blades ※ Select suitable blade which the pitch is less than the thickness of material.
▲ = over ▼ = under
THREADING MACHINES
24 TPI P45279 5 1/8" ▼ 2mm ▼ 4mm ▼ – ●
8 TPI 70078 10 – – 10mm ▲ − − Blade for Band Saw Beaver 4 Eco • 4F Eco
10 TPI 88916 10 − − 8mm ▲ − −
CUTTING MACHINES
10 TPI 70075 5 − 7mm ▲ 8mm ▲ − −
TEST PUMPS
24 TPI 70112 10 − − 4mm ▼ − −
Applicable Model
HSS 14 TPI 70114 5 1/2" ▲ 4mm ▲ 6mm ▲ − −
Band Saw Beaver 6
18 TPI 70602 5 1/8" ▲ 2mm ▲ 4mm ▲ − − Band Saw Beaver 6F
Band Saw 185
24 TPI 70257 5 − 2mm ▼ 4mm ▼ − − Band Saw 18F
Band Saw 170
Band Saw 170A
GRIT SAW 70142 5 − − − ● −
HSS
10 TPI 70445 5 − 7mm ▲ 8mm ▲ ● −
31
PLUMBING MACHINES & TOOLS
Item
EZY CUTTER 80
Outer Diameter ø 36mm ø 80mm
Cutting Capacity VP40 ~ 75 VU40 ~ 150 VP100 (~ 125) VU75 ~ 200
Guide white : 4.5mm Guide white : 5.5mm
Cutting Thickness
Guide black : 6.5mm Guide black : 7.5mm 36mm
Cutting Depth 85mm 85mm
Shank Diameter 6.35mm 6.35mm
CUTTING MACHINES
Item
80mm
Code No. EZ136 EZ180
TEST PUMPS
Saw Blade
For mild steels and nonferrous metals. Saw Blade (Bi - Metal)
※ Some other brand machines cannot use some blades.
※ Available for Pipe Saw 165S • 200SP, Makita wand HITACHI Saw.
※ Cleavable on the wall surface while bending.
※ Curved type
32
PLUMBING MACHINES & TOOLS
For cutting existing stainless steel pipes
THREADING MACHINES
FAST CUTTING
■ Built - in controller maintains
constant stroke speed under
92mm
operational load.
CUTTING MACHINES
SPEED CONTROLLER
■ RPM700 - ideal for cutting
stainless steel pipes.
480mm
ROBUST GEAR
STRUCTURE
■ Powerful power transmission
TEST PUMPS
with large 6 blades gear.
33
PLUMBING MACHINES & TOOLS
For cutting existing ductile iron, steel, and motor iron pipes
For water pipe by mortar lining cast iron : Code No.PS381 261mm
Item ※ For gas ductile iron pipes. ※ For water ductile iron and
ining motor iron pipes.
Capacity 2" ~ 14" (18" with optional acc.) 2" ~ 14" (18" with optional acc.)
Motor Voltage made to order • 1050W Voltage made to order • 1050W
Power transmission Direct connection to the motor Direct connection to the motor
Stroke length 57mm 57mm
Weight 18kg 18kg
HSS 380 • 490mm Grit Saw 380 • 480mm
Standard Accessories
Guide Plate 200A • 300A Guide Plate 200A • 300A
※ Information about Pipe Saw Blades on P36.
Vise set for cutting plastic Vise set up attachment for cutting
pipes at the angle of vertical pipes.
0 ~ 30°up to 320mm.
Code No.58021
115mm
2" ~ 14" (18") Air Motor
Ideal for removing gas and water pipe at factory. Safe work without sparks !!
Compact and easy cutting with rack & pinion system.
No worries about sparks with an air motor.
Air hose can be extended to work at a far distance. 540mm
※ Use the compressor over 15HP.
※ To cut 18", optional accessories are necessary.
170mm
34
PLUMBING MACHINES & TOOLS
For cutting gas ductile iron, steel, reversal sealing pipes
Code No.58003
THREADING MACHINES
330mm
170mm
CUTTING MACHINES
Power transmission Flexible shaft system
Weight 57kg
TEST PUMPS
Code No.58013
330mm
170mm
Weight 57kg
35
PLUMBING MACHINES & TOOLS
Pipe Saw Blade Special blades for ASADA pipe saw series !!
Item Code No. Quantity Cutting Capacity Blade Pipe Saw 165S • 200SP
Usage : Steel pipe, Ductile iron pipe, Vinyl chloride pipe, Angle steel
140 × 8 TPI 61210 5 ~ 2"
Blade for
Pipe Saw 165S
200 × 8 TPI 61371 5 ~ 4"
Pipe Saw 200SP
(※ Super HSS) 200 × 6 TPI 61372 5 ~ 4"
※ Super HSS includes cobalt. Also avairable for Pipe Saw 150.
CUTTING MACHINES
36
TEST PUMPS
PLUMBING MACHINES & TOOLS
R1/2"
(PT1/2")
233mm
Pressure Gauge Unit 333mm
Code No. Connection size
TP041 Pipe : 1/2" Pump : 1/4"
Code No.TP50B
Quick water supply priming by using a cordless screwdriver or drill to turn the pump at high speed.
Easily viewed ø75mm pressure gauge.
Efficient working by a large sized tank (10.5L).
High pressure hose rated to maximum pressure of 230kgf / cm2.
High speed water supply using cordless
screwdriver or drill to charge lines !
Supply Pressurization
Quick water supply priming Possible until 50kgf/cm2
BIG VOLUME 10.5L TANK !
by using a cordless by hands.
screwdriver or drill to turn G1/4"
the pump at high speed. (PF1/4")
R1/2"
(PT1/2")
Discharge water volume By gear pump : 3.5L/min By hand : 16ml/each time
Tank capacity 10.5L
Weight 5.5kg 296mm
Length of hose 1m
Standard Accessories Nipple with a suction filter R1/2" (PT1/2") × PF1/4", Hex bit
※ Capacity of gear pump is when it moves 1,100min−1.
※ Gear pump works only for initial supply of water (charging).
※ The maximum pressure by a screwdriver is 2Kgf / cm2.
38
PLUMBING MACHINES & TOOLS
Pulsation test pump
THREADING MACHINES
mechanical joints and
insufficient tightening of
polybutene pipe
■ Find missing or
insufficient epoxy
application at the joint of
vinyl chloride pipes. 255mm
329mm
240mm
Q. What is a pulsation test ?
CUTTING MACHINES
A.
pressure
Making the pressure go Pulsated
up & down produces
Quick coupling
water vibrations. If there
is improper work such as Insufficient
insert
poor couplings or screwing
of pipes, the vibrations
increase the fault resulting Mechanical coupling
in visible leaks. Insufficient
tighten or insert
If pressure goes down at
this stage, the installation
is already leaking. R1/2"
(PT1/2")
TEST PUMPS
R1/4"
(PT1/4")
39
PLUMBING MACHINES & TOOLS
G1/4"
THREADING MACHINES
(PF1/4")
Weight 9kg
R1/4"
R1/2" (PT1/4")
Pressure gauge unit, High pressure hose 1m, Suction hose 2.6m, (PT1/2")
Standard Accessories
Filter, Relief hose 2.6m, 2 wrenches, Case
EP1 Pressure Gauge Item Code No. Note Item Code No. Note
CUTTING MACHINES
Test pump kit (※1) EP101 pressure unit + High pressure hose 1m High pressure hose 1m EP160 –
Pressure gauge unit EP105 – High pressure hose 8m EP450 can be extended
Spray gun kit (※2) EP201 spray gun + high pressure hose 8m
ø100mm 2.5MPa EP383 connection size : 3/8"
pressure gauge with
glycerin (※3) 4MPa EP384 connection size : 3/8"
Spray gun EP430 –
connection size
Hose for direct connect EP252 length : 3m Gauge unit (※3) TP041 pipe : 1/2" pump : 1/4"
Code No. EP163
※1 : Kit which convers the high pressure cleaner 440 to electric test pump. ※2 : Kit which convers the EP440 to high pressure cleaner.
※3 : Use as a combination of the pressure gauge and the gauge unit.
380mm
0kgf / cm2 : 108/131L / min,
Discharge air volume
(Pressure : 50Hz / 60Hz) 3kgf / cm2 : 64/75L / min,
6kgf / cm2 : 47/59L / min
Power Source Single Phase 100V 50 / 60Hz
Weight 15kg
Standard accessories Air hose 5m, Air duster, Pump, Pressure gauge unit, Rotest.
40
PLASMA CUTTING
WELDING MAKE - UP TOOLS
WELDING MAKE - UP TOOLS
Lightweight 14.5kg.
Control Tip cutting Tip cutting 187 – 250V
Cutting capacity increased by 20% due to 20% higher output current than conventional models.
290mm
Easy to use
■ Front operation panel
covers all operation.
Simple operation for easy
use.
WELDING
WELDING MAKE
Power Source Single Phase 187 – 250V Electric Current Output : 20 – 40A / Input : 25A
MAKE-UP
Weight 14.5kg
Method Inverter by IGBT / Cooling : Forced Air- Cooling
■ Cutting capacity has been
TOOLS
Standard Torch Cable (4.6m) with 75° Torch, Tip 20A × 2pcs・40A × 2pcs,
increased by higher output Accessories Shield Cap, Electrode, Gas Distributor, Work Cable with Crip, Strage Case
current than conventional ※ Cutting capacity is based on use from a good power supply. Number at ( ) is high quality cutting.
models. ※ Air Compressor (rated output more than 1,500W) with air tank is required to supply air to the unit.
Cut Master 52
Code No.PZ261
Voltage Selector
■ Can select preferred votage 208V (230V) or 460V.
(Standard Set Up at 200V)
42
WELDING MAKE - UP TOOLS
Air Plasma Cutting Machine
Accessories
PLASMA CUTTING
390mm
20A PZ90091 ■ 5
Tip
(Exposed Tip Cutting)
40A PZ90093 ■ 5
Tip
(Shielded Tip Cutting) 40A PZ90094 ■ 5
Tip
(Exposed Tip Cutting)
30A PZ98206 ■ ■ ■ ■ ■ 5
60A PZ98210 ■ ■ ■ 5
WELDING
WELDING MAKE
Tip
(Shielded Tip Cutting)
80A PZ98211 ■ ■ 5
Power Source Three Phase 187 – 250V Electric Current Output : 20 – 80A / Input : 35A
MAKE-UP
Duty Cycle 40% Cutting Capacity Mile Steel : 40mm (20mm)
Air Pressure 0.48MPa Air Flow 190L / minute
100A PZ98212 ■ 5
- UP TOOLS
Weight 21.0kg
Method Inverter by IGBT / Cooling : Forced Air- Cooling PZ90097 ■ 1
TOOLS
Standard Torch Cable (6.1m) with 75° Torch, Tip 80A × 2pcs, Gas Distributor
Accessories Shield Cap, Electrode, Gas Distributor, Work Cable with Crip (5.6m)
※ Cutting capacity is based on use from a good power supply. Number at ( ) is high quality cutting.
PZ98213 ■ ■ ■ ■ ■ 1
※ Air Compressor (rated output more than 2,200W) with air tank is required to supply air to the unit.
PZ90098 ■ 1
Cutting Capacity Inverter Shielded Three Phase Optional item Cutting Guide
Mild Steel : 45(25)mm Control Tip cutting 187 – 250V Exposed Tip Cutting
For plasma cutting machines.
Lightweight 28.8kg For cutting straight and circular.
Shielded Tip cutting maximum 60A. Can be used for stainless steel panel.
Cutting capacity increased by 20% due to 20% higher output current than conventional models. Applicable to other brand machines by changing torch adaptor.
395mm
To control torch
without shaking !
300mm
380mm
43
WELDING MAKE - UP TOOLS
Air purge
Argon gas
Coupler connection
PLASMA CUTTING
1/4"PT
When back bead welding stainless steel, nitrogen & oxygen in the
atmosphere react with the weld metal to cause pores on the weld
surface resulting in defective welds.
To prevent this, a shield gas protects the weld metal.
M12 × 1.0 male
Without back shield, the back bead is oxidised, losing strength
WELDING MAKE - UP TOOLS
Without Back - Shield With Back - Shield Size Hose Code No. Size Hose Code No.
50mm 1pce S786000 200mm 1pce S786004
75mm 1pce S786001 250mm 1pce S786005
100mm 1pce S786002 300mm 2pcs S786006
125mm 1pce S786045 350mm 2pcs S786007
150mm 1pce S786003 400mm 2pcs S786008
Purge Ring
With ring balloon shape to save back shield gas at welding operation for large diameter pipes.
Purge Oxygen density inside 900mm pipe to less than 1% in 10minutes.
With hose to insert additional gas into the sheild.
Luminous tape for centering
With relief valve to remove faster.
■ Easy positioning with luminous tape. By Silicon glass heat resistance upto 900°C.
Air purge
■ High measurement
accuracy of Oxygen
level inside shield.
■ With probe to insert to
tiny space.
■ Quick response time.
44
WELDING MAKE - UP TOOLS
Angle Machine
without changing tools ! Max. Bending Capacity V Angle Corner Edge Optional item
~ 75 × 75 × 6mm Notch Bender Cut Cut Puncher
ANGLE MACHINE
■ Can process stainless angle steel 75 × 75 × 6mm with standard
accessories. 316mm
PLASMA CUTTING
■ Main unit and hydraulic pump unit are separated for easy
transport to working site.
High Speed Hydraulic Pump Unit NZ45SV With Foot Switch Standard Acc. Main unit (V Notch・Bender), Hydraulic Pump Unit FLF
45
WELDING MAKE - UP TOOLS
Between legs
580mm
Between legs
495mm
WELDING MAKE - UP TOOLS
HV H Ball
Between legs
580mm
LV L ball
46
WELDING MAKE - UP TOOLS
For supporting pipes For supporting pipes
Load capacity LV : 1,130kg / L Ball : 450kg Collapsible legs Load capacity : 450kg
PLASMA CUTTING
Lowest
51cm
Between legs
970mm
Between legs
359mm
Pipe Jack Head 6 Kinds of Heads. Use in combination with Pipe Jack L / H depending on the application.
Standard V Head Ball transfer Steel Wheel Head Rubber Wheel Head Bar Stock Head Stainless Steel
Head
Easy to fold up !
Quick release button allows clamp arms to
open and close in seconds. Tighten the chain on the pipe support !!
Rugged steel frame for years of use.
Weight : 3.9kg 410mm
(storage)
A quick, easy, safe clamp for
holding pipe in V head jack
stands !
260mm
(storage)
47
WELDING MAKE - UP TOOLS
Adjust - A - Rolls
Head for stainless Max load capacity
steel avairable H・L Roller : 900kg / H・L Ball : 450kg
Series
Fast adjustment for easy pipe positioning.
Wheels positions are adjustable.
Adjust - A - Roll L
800mm
585mm
WELDING MAKE - UP TOOLS
800mm
585mm
585mm
800mm
48
WELDING MAKE - UP TOOLS
For supporting large pipes
MINI Roller
PLASMA CUTTING
Only 30cm height !
Easy to work on floor !!
280mm
560mm
Ball
Height 18cm (include roller head : 30cm) 18cm (include roller head : 30cm)
Diameter of pipe 1/2 ~ 36" (12 ~ 900mm) 1/2 ~ 36" (12 ~ 900mm)
Head
For Steel For Stainless Steel For Steel For Stainless Steel For Steel & Stainless Steel −
Code No.
S783151 S783153 S783154 S783159 S783152 S783155
Installation image
49
WELDING MAKE - UP TOOLS
Centering
A fast, accurate fit - up clamp for pipe to pipe, pipe to elbow and more.
Contact parts are made of stainless steel.
440mm
No.2
320mm
No.1
190mm
WELDING MAKE - UP TOOLS
Specification
Ultra Fit (Quick)
1 – 21/2 : Code No.S781540 2 – 6 : Code No.S781550
L
5 – 12 : Code No.S781560
A fast, accurate fit - up clamp for pipe to pipe, pipe to elbow, elbow to elbow and more.
H
Rugged, compact design to operate in tight locations.
Contact parts are made of stainless steel.
A
Easy to set / remove with
D
quick action button for quick
clamp / release !!
B W
Ultra Clamp 5 − 12
Item No.1 No.2 No.3 Pipe to Pipe Elbow to Elbow
H (mm) 205 370 555
W (mm) 105 290 480 440mm
L (mm) 160 235 240
A (mm) 37 55 50
B (mm) 67 102 102 2−6
320mm
Ultra Fit
Item 1 − 21/2 2−6 5 − 12
1 − 21/2
H (mm) 200 375 550
190mm
W (mm) 145 295 460
L (mm) 155 240 245
A (mm) 35 35 35
B (mm) 60 60 60
※ H size : Height when fixed to the largest pipe
※ W size : Width when fixed to the largest pipe 220mm 370mm
※ L size : Length of the handle
120mm
※ A size :Dimention of up to thumbscrew from the pipe fixed position.
※ B size : Max width of the body
Item 1 − 21/2 2−6 5 − 12
Fixing capacity 1 ~ 21/2" 2 ~ 6" 5 ~ 12"
Weight 1.8kg 3.6kg 6.8kg
50
WELDING MAKE - UP TOOLS
For tack welding and centering For preventing earth wire tangles
A fast, accurate fit - up clamp for pipe to pipe, pipe to elbow and more.
Contact parts are made of stainless steel.
PLASMA CUTTING
Pipe to Pipe Pipe to Elbow
No.3
Earth wire never gets tangled !
Easy to set up, just fix with upper
screw after set lower screw ! 440mm 130mm
No.2
100mm
No.1 320mm
25mm
6mm
220mm 370mm
120mm
For tack welding and centering For accurate alignment of pipe flange
Applicable to stainless steel Quick installing pins work as convenient reference points to level flange for tack and
weld - out.
Features Acme threads for maximum clamping power and hardened steel for long
A fast, accurate fit - up clamp for fitting to elbow to elbow. lasting use.
Rugged, compact design to operate in tight locations.
Contact parts are made of stainless steel.
440mm
2−6
190mm
220mm 370mm
120mm
Item No.1 No.2 No.3 Item Stainless Steel (2PCS) Quick (2PCS) with Spirit level (2PCS + Bar)
Fixing capacity 1 ~ 21/2" 2 ~ 6" 5 ~ 12" Diameter of bolt 16 ~ 41mm 16 ~ 41mm 16 ~ 41mm
Weight 1.4kg 3.6kg 6.1kg Weight 1.8kg 1.8kg 2.0kg
51
WELDING MAKE - UP TOOLS
Flange Spreader
3 : Code No. S784003 4 : Code No. S784002
5 : Code No. S784001 6 : Code No. S784000
3 4
F
PLASMA CUTTING
A D
5 6
Item 3 4 5 6
Weight 5.5kg 5.5kg 6.4kg 6.8kg
WELDING MAKE - UP TOOLS
2 – 4 : Code No. S784100 4 – 8 : Code No. S784102 Easy to set ! Easy to tack weld !!
8 – 12 : Code No. S784103
4–8
8 – 12
52
WELDING MAKE - UP TOOLS
For holizontal adjustment For correcting angles (45° / 90°)
Drop forged handle and wing nuts designed for rough field use and easy adjustment Correcting of angle
with gloved hands.
Consists of two 45° blades that slide effortlessly
Available up to ø900mm.
in an industrial - strength plastic handle.
Capable of a horizontal positioning ! Up to Flange : ~ 8", Fitting : ~ 14"
370mm
PLASMA CUTTING
Item Code No. Pipe size Weight 270mm
Steel S781000 25~250mm 10kg
Clamp Champ 1 − 10
Stainless Steel S780999 25~250mm 10kg
Steel S780998 25~400mm 15.7kg
Clamp Champ 1 − 16
Stainless Steel S780997 25~400mm 15.7kg
Steel S781250 250~900mm 50.4kg
Clamp Champ 10 − 36 Weight 1.1kg
Stainless Steel S781251 250~900mm 50.4kg
For centering branch pipe and layout of center line For leveling the flange
180mm
200mm
Diameter capacity 1" ~ 24" Repair item Flange hole pitch 60 ~ 195mm Repair item
Diameter of bolt ø 16 ~ 44mm
Weight 480g Spirit level : Code No. PZ722000 Spirit level : Code No. PZ722000
Weight 950g
150mm
Item 71 (large) : Red 59 (middle) : Blue 46 (small) : Yellow Scale Accurate quick check : 0 ~ 3cm Root weld : 0.7 ~ 4mm
Diameter capacity 62・65・68・71mm 49・52・56・59mm 37・40・43・46mm Size L : 150 × W : 8 × H : 12mm
Weight 600g 600g 600g Weight 100g
53
WELDING MAKE - UP TOOLS
Easy to read vials with magnetic base. Easy to read vials with magnetic base.
Four vials. (0°, 30°, 45°, 90°) Four vials. (0°, 30°, 45°, 90°)
There is a 'v' cut into the base for pipe and conduit work. There is a 'v' cut into the base for pipe and conduit work.
32mm
32mm
PLASMA CUTTING
210mm
140mm
Measured angle 0°, 30°, 45°, 90° Measured angle 0°, 30°, 45°, 90°
For marking off pipes and steels For removing branch pipes from pipes (ø40 ~ 300)
WELDING MAKE - UP TOOLS
conta marker : Code No.PZ400 jumbo marker : Code No.PZ403 Code No.PZ414
For correcting angles of flange For correcting angles of flange and socket pipe
54
HOISTS & LIFTS
Pipe Support for large diameter pipes
PAT.
Code No.S781403
transporting hoist・processing・
welding・shipping.
HOISTS & LIFTS
780mm
~
1080mm
240mm
800mm
1194mm
For Steel : Code No.S781383
For SUS : Code No.S781397
Load Capacity : 450kg Diameter : 3/8 ~ 36" (100 ~ 900mm)
56
Wire type
R460・R550・R760
F224 : Code No.S783900
Made - to - Order
Hoist F224
2 winch system
Operate load and
mast elevation
separately.
Double drive
▼
▲ system
▼
mast
elevating
winch
Transportation
Mast and base
section separate
quickly for
transportation. Small sized hoist !
Special designed base
and caster (200mm)
base
▼
Use gravity to fittings for loads up to 45°. Brings pipe flange to exact plumb for tack and weld out.
One man can position objects 450kg. One man can position flange. (over 5 inch, 450kg)
With coupler adjust.
Hang by a wire and adjust Fits pipes with bolt holes 19 ~ 42mm. Easy to position and
the centre of gravity lift large flange.
225mm
305mm
Coupler Adjust
Flange Adjust
20mm
365mm Flange 60 ~ 400mm
57
Belt type, Upper series 2208
(with brake)
Upper Series
Two speed option allows the operator to raise and lower
loads at standard or at high speed.
Easy to carry. 450mm
Nylon Strap - no more cable kinks.
For installation of air conditioner, Compact, lightweight but strong.
530mm
loading and unloading vehicles, lifting
cable rack, installing lights, etc. Wide Loading and unloading freely from
range of applications. the floor to the ceiling positions !!
HOISTS & LIFTS
No need of power
sources Belt type, Upper series 2210
■ Manual and belt type. W − 330 • W − 330B (with brake)
■ Without souces of Code No.S784310 with brake : Code No.S784310B
power such as electricity
Max height Lift Capacity Weight
or carbon dioxide, can W-330 : 48.0kg Belt type Manual
lift loads. 3.35m 135kg W-330B : 49.1kg
Two speed option allows the operator to raise and lower 450mm
Reversible Forks loads at standard to high speed.
■ Forks easily can be Easy to carry. 530mm
removed by pulling Nylon Strap - no more cable kinks.
lunger pins and reversed Compact, lightweight but strong.
for added height or to
get flush with ceiling.
1,780mm
Legs Item W - 330 W - 330B
forks up 3.35m 3.35m
■ Legs extend. Height max
forks down 3.02m 3.02m
660mm (660mm and 790mm) Height min forks down 0.15m 0.15m
790mm Lift capacity 135kg 135kg
Height 1,780mm 1,780mm
External
Easy loading & dimension
Length 1,040mm 1,040mm
unloading Width 660mm 660mm
Weight 48kg 49.1kg
■ Loading and unloading
※ For mounting of the upper, please check with the dealer you
is easy as the legs go bought the car at, referring to the upper external dimensions.
right down to the ground.
Aluminum Tray
Convenient Handle
■ Can also be used as a Code No. S784240
hand truck.
Wheel Brake Kit
58
Wire type, Upper series 2412
W − 390
forks up 3.90m
Height max
Super compact 5.1m lifts. Forks easily Compact, but all - round upper !!
can be
Fits in most vans.※ removed and NEW MODEL !
Integral structure and no tools or loose hardware to worry about. Hold - down
Safety designed. (Wire goes through the mast) bar retracts
and stores
Standard stabilizer. (auxiliary legs) behind mast
when not in
use.
forks up 5.10m
Height max
forks down 4.80m
Height min forks down 0.15m
Lift capacity 200kg
Height 1,594mm Leg rollers allow
External lift to be wheeled
Length 1,219mm
dimension around.
Width 671mm
Weight 110.2kg
※ For mounting of the upper, please check with the dealer you bought the car at, referring to the upper external
dimensions.
59
2000 Upper series 2010
W − 320
LIFT & TRANSFER
60
Electric Wire Upper
UE − 30
Emergency switch
435mm
745mm
Precision work
■ Possible to fine - adjust by speed controller and hands.
Smooth lift
■ Smooth lifting but no swaying.
Easy installation
■ Easy transportation. ■ One min to set !
61
Hydraulic Upper
Code No.UA280
Eco - Friendly !!
Max height Load capacity Weight
Hydraulic Upper
Hydraulic
2.8m 160kg 12kg
Lightweight.
Plumbing work Conduit work Smooth lifting up & down at safety design !
Upper A − 40 • A − 56
A - 40 : Code No.UA400 A - 56 : Code No.UA560
At middle position
Max Height Lifting capacity Weight
A - 40 : 3.98m A - 40 : 23kg Hydraulic
A - 56 : 5.60m 160kg (※) A - 56 : 29kg
62
Atmospheric Upper
※
Length of No need for electrical power,
diagonal
Just need Carbon acid gas !
※
Optional Item
Item Upper G - 40C (Compressor)
Item Code No.
Height max : 3.98m / min : 1.01m
Pressure regulator (for carbon acid gas) UG004 Weight 23kg
Lift capacity 125kg (※)
Cylinder holder UG035 Length of diagonal 1176 × 1176mm
Length (between leg and leg)※ 832 × 832mm
Cylinder for Carbon acid gas (capacity 5kg) UG007 Operate system Compressor
body, top board, hose with valve (3m),
※ Cylinder only without gas Standard Accessories
Compressor ABX - 09, tools bag
Oilless small compressor ABX - 09 FA009 Upper G - 40S Upper G - 56S
Item (Carbon acid gas) (Carbon acid gas)
※ out put : 900W max pressure : 8.0kgf / cm2
max : 3.98m max : 5.60m
Height
Hose with control switch (5m) UG005 min : 1.01m min : 1.28m
Weight 23kg 29kg
Hose with valve (3m) UG021 Lift capacity 160kg (※) 160kg (※)
Length of diagonal 1176 × 1176mm 1556 × 1556mm
Short - legs (for 40・56) UG025 Length (between leg and leg)※ 832 × 832mm 1100 × 1100mm
Carbon dioxide
※ For working by wall. Length of legs : 175mm Operation system
cylinder・cylinder holder (optional item)
(Distance between the centre of poles and wall : 247mm)
Body, top board, pressure regulator,
Standard Accessories
hose with control switch (5m), tools bag
(※) To ensure safety, please use at the recommended load range. ※ Photo : Carbon acid gas type
REF : lift capacity 160kg → less than 3m, 130kg → less than 4m, 50kg → until 5.6m cylinder・cylinder holder (optional)
63
Hydraulic upper for a ride
Upper L − 443 • L − 63
LIFT & TRANSFER
Length of
diagonal
Safety
■ The operator can adjust the stop position at hands
and constant speed. ※
Step with a spirit level, Caster with a stopper-
safety work.
※
L - 443 L - 63
No sudden falling with a hydraulic cylinder.
Item Upper L - 443 Upper L - 63
Height max : 4.35m / min : 1.74m max : 6.32m / min : 1.93m
Compact and lightweight Weight 130kg 160kg
Load capacity 1 person (100kg) 1 person (120kg)
■ Can be carried on site by a single person. Length of diagonal 1901 × 1901mm 1901 × 1901mm
Lightweight, compact design with casters which Length (between leg and leg)※ 1404 × 1282mm 1404 × 1282mm
can be brought into an elevator. Storage dimension L : 1200 × W : 780 × H : 1730mm L : 1200 × W : 780 × H : 1980mm
Can fold down to small size for easy carrying in a Operate system Pump unit P15JE Pump unit P22
car or transporting in a confined space Standard Accessories
Body, top stage, pump unit, remote controller switch, hydraulic hose 1.5m,
power cord, tools bag
For lifting ceiling pipes. For installation of complex For lifting device of For installations of To prevent frost damages
ceiling system, etc. lighting equipment, antenna and TV camera. in farm, etc.
garden, etc.
64
DRAIN CLEANING MACHINES
CLEANER, PIPE CLEANING,
Drain Cleaner H − 75
MAINTENANCE
With Bulb Head : Code No.DH75B With Drop Head : Code No.DH75D
ø206mm
DRAIN CLEANING MACHINES
330mm
PIPE INSPECTION CAMERAS,
INDUSTRIAL ENDOSCOPES
Drain Cleaner E − 75
Code No.DE75B
MACHINES
470mm
66
CLEANER, PIPE CLEANING,
For blockages in bathroom, toilet & restaurant kitchens
MAINTENANCE
Code No.DH150 Cleans pipes with bends as easily as straight pipes !!
Applicable pipe dia
Manual Replaceable head
ø20 ~ 100mm
510mm
MACHINES
Applicable pipe dia Electrical Voltage
Replaceable head
ø20 ~ 100mm made to order
365mm
Replaceable head for various pipe cleaning applications.
Condenser motor means quiet operation.
290mm
430mm
Cleaning capacity Pipe diameter : ø20mm ~ ø100mm Maximum length : 20m (※)
Standard wire with unit
Wire rotation 215 / 260min–1 (50 / 60Hz)
Description Code No.
Weight 18.3kg
PC Wire (15.2m × ø13mm)
Applicable wire dia ø8mm・ø10mm・ø13mm
Standard PC Wire 15.2m × ø13mm (Can not extend), Double Grease Cutter 40, 48500
Accessories Bulb Head 24, Wire Key, Hex Wrench
※ For operation more than 15m, optional accessory 20m wire is required.
Optional accessories are listed on P68 & P69.
67
CLEANER, PIPE CLEANING,
applications with flexible, Wire with Bulb Head Wire & Head integrated type
strong & high quality wires !! 1
Popular wire for various types
of blockages.
WIRES for
Drain Cleaners 2
Wire with Drop Head
Ideal for complicated piping with
bends.
Wire & Head integrated type
Easy to connect
■ Can connect easily & quickly
even with safety gloves on. PC Wire Head replaceable
Strong wire with plastic core.
5 With a suitable head, ideal for
complicated piping with bends.
Applicable models
■ : Standard Accessory ■ : Optional Accessory
Pipe Diameter
Description (Diameter × Length) Code No. (ø mm) H - 75 H - 150 E - 75 E - 150
■
Wire with Bulb Head ø 8mm × 7.7m DH301 20 ~ 75 With Bulb Head ■ ■ ■
model
1
ø 8mm × 15.2m DH309 20 ~ 75 ■ ■ ■
ø 8mm × 20.0m DH310 20 ~ 75 ■ ■
■
Wire with Drop Head ø 8mm × 7.7m DH302 20 ~ 75 With Drop ■ ■ ■
Head Model
2
ø 8mm × 15.2m DH317 20 ~ 75 ■ ■ ■
ø 8mm × 20.0m DH318 20 ~ 75 ■ ■
PC Wire
5 ø 13mm × 15.2m 48500 50 ~ 100 ■
68
CLEANER, PIPE CLEANING,
HEADS to remove various HEADS for Drain Cleaners
MAINTENANCE
kinds of obstructions 1 Bulb Head 2 Drop Head
HEADS for
Drain Cleaners General head to clean
pipes and drains with
For cleaning complicated
piping.
tight or multiple bends.
Different heads to suit various types of
obstruction.
MACHINES
work.
Applicable models
For ø 10・ø 13・ø 16mm wire ■ : Standard Accessory ■ : Optional Accessory
48608 30 ~ 75 15 ■ ■
2 Drop Head
48606 30 ~ 75 24 ■ ■
48613 30 ~ 50 22 ■ ■
3 Grease Cutter 48616 40 ~ 75 36 ■ ■
48617 65 ~ 100 62 ■ ■
48609 30 ~ 75 24 ■ ■
48610 40 ~ 100 32 ■ ■
5 Funnel Head
48611 50 ~ 100 38 ■ ■
48612 75 ~ 100 60 ■ ■
48618 25 ~ 50 20 ■ ■
48619 40 ~ 75 30 ■ ■
7 Wire Brush
48626 50 ~ 75 40 ■ ■
48620 75 ~ 100 50 ■ ■
69
CLEANER, PIPE CLEANING,
Water Tank
To Radiator
Shower
Bath
Drain Cleaning Machines Drain Cleaner E - 150
DRAIN CLEANING MACHINES
To Radiator
Basin
Toilet
To Radiator
To Radiator
Urinal Sink
Road
Trap House Public Ditch
High Pressure Cleaner
Pit Inlet
Sewer
Boiler Main Pipe
Water
Pump Water Kitchen
Receiving
Tank
Water Supply
Main Pipe
HIGH PRESSURE CLEANING
MACHINES
3. PIPE CLEANING
Clean the pipe with “HIGH PRESSURE CLEANER”.
5. MAKE REPORT
Give a professional presentation to the customer with “before & after” photos and / or videos on
completion of the job.
70
PIPE INSPECTION CAMERAS
INDUSTRIAL ENDOSCOPES
CLEANER, PIPE CLEANING,
Code No.TH2515
Can be used without Head diameter : 25mm Applicable pipe size Image 2 × Digital Zoom
removing from carry case ! Cable length : 15m ø30 ~ 100mm reversal function function
Compact design !
Small sized head, ø25mm.
Illuminate dark tubes with white LED light.
Easy to use
■ Can be used without
removing from carry case. Light weight・Compact !
■ Easy to carry with a shoulder HighSpec model !!
strap.
PIPE INSPECTION CAMERAS,
INDUSTRIAL ENDOSCOPES
LCD Monitor
■ Image / Video : 300,000 pixel
380mm
3.5 TFT
colour monitor
295mm
actual image
Operation keys
■ Easy to record and play
images / videos with simple
operation keys. Li - Polymer Battery (2hours charge for 4hours use)
Battery
※ Voltage made to order
❶ Data select key ❶ Camera Head diameter : ø 25mm / Cable length : 15m
❷
❷ Image shutter key Applicable pipe size Straight pipes : ø 30mm ~ 100mm, Bent pipes : ø 40mm ~ 100mm
❸
❸ Video recording key
Visible angle 73°
Focus distance 5 ~ 60cm
Digital zoom system Display 3.5 TFT colour LCD / Resolution : 320 × 240 pixels
Weight 4.8kg
■ Single action digital zoom 2 ×.
Saving format Image・JPEG (300,000 pixels) / Video・AVI (300,000 pixels)
Storage medium SD card (Max. 32GB)
SD card ・ AC adapter External output USB, AV
■ Charge by AC adapter. Waterproof function Depth 10m
■ SD card (2GB) video - 200 mins / image - 30,000 photos. Clear scope, Camera cable 2515, AC adapter, Mini USB cable, AV cable,
Standard Accessories
SD card 2GB, Cable drum, Shoulder strap, Carrying case
※ For ø100mm pipe, Centering Guide P76 (optional) is necessary.
72
CLEANER, PIPE CLEANING,
For checking inside of pipes
MAINTENANCE
Code No.TH2505
Battery Li - Polymer Battery (2hours charge for 4hours use) ※ Voltage made to order Newly developed drum mechanism !!
Camera Head diameter : ø 25mm / Cable length : 5m (minmum bending radius : 90mm) Compact - easy to carry !
Applicable pipe size Straight pipes : ø 30mm ~ 100mm, Bent pipes : ø 40mm ~ 100mm
Visible angle 73°
Focus distance 5 ~ 60cm
Display 3.5 TFT colour LCD / Resolution : 320 × 240 pixels
Weight 2.4kg (including motor & drum)
MACHINES
Code No. TH280 Code No. TH281
Industrial endoscope.
Focus can be selected according to the applications.
Standard Clear scope, Clear scope cable, AC adapter, Mini USB cable, AV cable, 122mm
Accessories SD card 2GB, Carrying case
73
CLEANER, PIPE CLEANING,
Industrial endoscope.
Protector (1/2")
Inside Dent 90° Side view mirror
HIGH PRESSURE CLEANING
Focus distance
Display 3.5 TFT colour LCD / Resolution : 320 × 240 pixels
Weight 450g (Body)
Saving format Image・JPEG (300,000 pixels) / Video・AVI (300,000 pixels)
Storage medium SD card (Max. 32GB) 39mm
External output USB, AV
Clear scope, Cleare scope cable 10m, AC adapter, Mini USB cable,
Standard Accessories AV cable, SD card 2GB, Carrying case, 90°Side - view mirror, 122mm
Ball guide 9.9mm, Protector (1/2")
Industrial endoscope.
Cable length can be selected according to the applications.
74
CLEANER, PIPE CLEANING,
For checking 1" gas pipes
MAINTENANCE
Code No.KN2015
Three - stage telescopic cable can pass elbow fitting for 1" pipes.
High durability. With the unique telescopic cable,
possible to pass 1" elbow fitting !!
Battery Li - Polymer Battery (2hours charge for 4hours use) ※Voltage made to order
Camera Head diameter : ø 20mm / Cable length : 15m
Visible angle 50°
Focus distance 3cm ~ 7cm
MACHINES
Image 2 × Digital Zoom
Head diameter : 4mm
reversal function function
Rotatable
415B 90°
430B
Battery Li - Polymer Battery (2hours charge for 4hours use) ※Voltage made to order
Camera Head diameter : ø 4mm (Side viewing tube ø 5mm)
Visible angle 60°
39mm
Focus distance 2cm ~ 6cm
Cable length 150mm 300mm
Display 3.5 TFT colour LCD / Resolution : 320 × 240 pixels
Weight 680g (include camera) 700g (include camera)
Saving format Image・JPEG (300,000 pixels) / Video・AVI (300,000 pixels)
Storage medium SD card (Max. 32GB) 230mm
External output USB, AV
Waterproof function capacity of resist pressure 0.02MPa
Ambient temperature use・storage : − 20 ~ + 60℃ (no condensation) 122mm
Clear Scope, Side viewing tube (90°), Video scope, AC adapter,
Standard Accessories
Mini USB cable, AV cable, SD card 2GB, Carrying case
75
CLEANER, PIPE CLEANING,
For Clear Scope 2505・2515・2516 (For ø25mm Camera head) Unit applicable to 1" gas pipes.
Pipe diameter : ø75mm ~ ø100mm Can be connected to a variety of cameras.
※ Passage smoothness changes depending on the condition in the pipe.
ø45mm
30mm
DRAIN CLEANING MACHINES
Ideal for checking on the processing line. For Clear Scope Eco2515
Slim camera head for entering small holes easily.
Can be connected to a variety of cameras.
PIPE INSPECTION CAMERAS,
INDUSTRIAL ENDOSCOPES
Head diameter ø 4mm Pipe diameter ø 40 ~ 75mm Camera Head diameter : ø 25mm / Cable length : 15m
Head length 415B : 150mm / 430B : 300mm Set Camera cable, Drum, Coil cable, Shoulder belt, Carrying case
Code No. TH010 TH012 TH013 TH015 TH011 Code No. TH011S TH013S TH401SF TH401LF
made to order made to order made to order made to order Camera diameter ø 5.5mm ø 5.5mm ø 10mm ø 10mm
Camera diameter ø 5.5mm ø 5.5mm ø 5.5mm ø 5.5mm ø 5.5mm Cable length 1m 3m 1m 1m
Cable length 1m 2m 3m 5m 10m Focus distance – – Near focus : 2 ~ 8cm Far focus : 8 ~ 100cm
70°
90°
※ Insert from the side
110°
without thread.
Code No. TH802 TH801 TH807 Code No. TH307 TH304 TH308 TH309 Code No. TH301 TH312
Code No. TH804
Angle 70° 90° 110° Size 3/8" 1/2" 3/4" 1" Size ø 9.9mm ø 15mm
76
HIGH PRESSURE
CLEANING MACHINES
CLEANER, PIPE CLEANING,
230mm
High pressure hose Standard : 8m Max Length : 30m Standard : 8m Max Length : 30m
High pressure hose (8m), Spray Gun, High pressure hose (8m), Spray Gun,
Standard Accessories Water suction hose (2.6m), Plastic Water suction hose (2.6m), Plastic
case case, Pressure gauge 210mm
Optional Item
Item Code No. Item Code No.
High pressure hose 8m EP450 Gun body EP442
High pressure hose 10m EP207 Lance assembly EP273
Water tap connecting hose EP252 Lance 150mm assembly EP275 With pressure gauge
Spray gun EP430
Ideal for cleaning fins of A / C. By replacing the standard lance with the 150mm lance it is
possible to clean fins of room A / C.
Lance assembly
Ideal for cleaning fins Lance assembly Gun body
of A / C. length : 360mm length : 190mm
Hot & Cold Water Three phase 200V Direct from water tap
Powerful cleaning by hot water up to 80 ℃ !!
Ideal for removing oil in factory.
Heater for freeze protection Hot water supply ※Water tap is optional.
Equipped heater to prevent from freezing. Can be used as hot - water supply system.
Optional Item
Water protection cover for smoke stack Hot water tap for washing
698mm
78
CLEANER, PIPE CLEANING,
For cleaning water filtration tank, building wall, etc
MAINTENANCE
Code No.HD1010G Engine type
Unloader Valve
Protects pump and motor.
Weight 26kg
For cleaning building wall, floor, construction machines, animal shack, etc
Code No.HD1315G
MACHINES
Discharge Pressure Engine Self - With Stainless Steel
13.0L / min 14.7MPa 3.7kW Priming one - touch coupler
From water tap Pipe Cleaning
Optional Item Optional Item
P.87
Unloader valve
Protects pump and motor.
Straight Shape Fan Shape
Air relief valve
Standard accessory of Variable Gun for wide range
of applications. Sufficient self suction.
79
CLEANER, PIPE CLEANING,
Code No.HD128
pump.
Weight 30kg
Engine Self - With Stainless Steel From water tap Pipe Cleaning
Optional Item P.87
4.7kW Priming one - touch coupler ※21/90GP not available
Optional Item
Dual Gun
80
CLEANER, PIPE CLEANING,
For cleaning water filtration tank, water reservoir, etc
MAINTENANCE
Code No.HD1620G
Dual Gun
Code No.HD3005G
MACHINES
Discharge Pressure Engine Self - With Stainless Steel Wash out stubborn dirt with big
30.0L / min 4.9MPa 2.9kW Priming one - touch coupler
volume of discharging water !!
Pipe Cleaning
Optional Item
Plunger Pump
Durable & high performance triple plunger 685mm
pump.
Air chanber
Decreases pulsation of discharge pressure.
Foldable handles
Easy transportation with foldable handles
and large wheels.
Weight 51kg
High Pressure Hose 3/8" × 20m, Turbine Gun, Water Suction Hose 3m,
Standard Accessories
Residual Hose 3m
81
CLEANER, PIPE CLEANING,
For cleaning small sized water filtration tank, building wall, etc
Cleaning construction machines, animal shack, chicken shelter, automobile, and inside of
pipes. ( Pipe Cleaning Hose optionally required ) Soundproof high presure cleaner suitable
for works at night in residential area !!
Compact Carry Handle
Small sized - 34kg, soundproof cleaner. Easy transportation with a handle.
DRAIN CLEANING MACHINES
555mm
440mm
385mm
Pressure 10.0MPa (102kgf / cm2) ※ Fixed pressure
Pipe cleaning capacity ~ ø 75mm
Weight 34kg
High pressure hose Standard : 10m Max length : 100m
Fuel tank capacity 1.6L
Variable Gun, High Pressure Hose 1/4" × 10m, Water Suction Hose 3m,
Standard Accessories
Residual Hose 3m, Carry Handle
※ Noise level : Average volume measured at 7meters away.
For cleaning small sized water filtration tank, building wall, etc
HIGH PRESSURE CLEANING
Cleaning construction machines, animal shack, chicken shelter, automobile, and inside of
pipes. (Pipe Cleaning Hose optionally required)
402mm
Discharge volume 13.0L / min
Weight 47.5kg
82
CLEANER, PIPE CLEANING,
For cleaning middle sized water filtration tank, building wall, etc
MAINTENANCE
Code No. HD1515S Engine type Soundproof : Noise 63dB
Self - Priming Cell Start With Stainless Steel one - touch coupler Soundproof high class model !!
From water tap Optional Item P.87 ※15/150GS only
For cleaning big sized water filtration tank, building wall, etc
MACHINES
High Pressure Cleaner 30 / 100GS
Code No. HD3010S3 Engine type Soundproof : Noise 64dB
Self - Priming Cell Start With Stainless Steel one - touch coupler
83
CLEANER, PIPE CLEANING,
Discharge Pressure Engine Self - With Stainless Steel From water tap
Optional Item
Washing・Pipe cleaning with 2way Hand gun !!
12.0L / min 7.8MPa 2.1kW Priming one - touch coupler P.87
Variable gun
Long life
Low speed engine and pump
Hand gun
assure long life.
Straight Fan shape
Pressure gauge
1/4" hose Stable - neesle. Easy to read
glycerin filled pressure gauge.
2 ways of usage
・connect to Variable nozzle - short typed gun. Air relief valve
・connect to Pipe cleaning hose - gun for cleaning pipes.
Sufficient self suction.
High Pressure Cleaner 16 / 150GP A High End cleaner for pipe cleaning !!
Code No. HD1615P1 Engine type Pipe cleaning
Engine Self - With Stainless Steel From water tap Optional Item
P.87
4.7kW Priming one - touch coupler ※21/90GP not available
Dual Gun
84
CLEANER, PIPE CLEANING,
For cleaning drain pipes in buildings
High Pressure Cleaner 16 / 200GP High capacity for cleaning pipes and wash out !!
MAINTENANCE
Code No.HD1620P1 Engine type Pipe cleaning
Discharge Pressure Engine Self - With Stainless Steel From water tap
Optional Item
16.0L / min 19.6MPa 5.1kW Priming one - touch coupler P.87
INDUSTRIAL ENDOSCOPES
High Pressure Cleaner 30 / 50GP
Code No.HD3005P Engine type Pipe cleaning
MACHINES
Pipe cleaning capacity ~ ø 250mm
Weight 58kg
High pressure hose Standard : 20m Max length : 50m
Fuel tank capacity 3.7L
600mm 678mm
Turbine Gun, High Pressure Hose 3/8" × 20m, Water Suction Hose 3m,
Standard Accessories
Residual Water Hose 3m, Pipe Ceaning Hose 3/8" × 30m, Hose Reel
High Pressure Cleaner 60 / 50GP Made - to - order For cleaning large sized drain pipes !!
Code No.HD605 Engine type Pipe cleaning
85
CLEANER, PIPE CLEANING,
For cleaning stubborn stain, peeling tree barks, etc For keeping dust down at site of building demolition
Straight spray nozzle of high pressure water circles to powerful Changeable from straight spray to conical spray by shift lever.
conical spray.
※ When peeling off trees barks with Turbo Gun, use the gun pressure over
7.8MPa. (80kgf / cm2)
Straight Shape
Fan Shape
DRAIN CLEANING MACHINES
10 / 100G HD10023 −
15 / 150GS, 16 / 150G・GP − HD04003
8 / 100GS, 13 / 100GS, 13 / 150G, 14 / 170,
15 / 200, 16 / 200G・GP・GS
− HD06003
8 / 100GS, 12 / 80G・GP, 13 / 100GS, 13 / 150G HD10023 HD03118
21 / 90G・GP, 20 / 100GS − HD08003
15 / 150GS, 16 / 150G・GP, 16 / 200G・GP・GS HD211 HD04019 30 / 50G・GP − HD26005
23 / 80GS, 30 / 100GS HD3011 HD13002
21 / 90G・GP, 20 / 100GS, 23 / 80GS HD237 HD08033 60 / 50GPAA HD321 HD15001
86
CLEANER, PIPE CLEANING,
For general cleaning For general cleaning
MAINTENANCE
Two nozzles for spray with straight or fan shape. Trigger gun and Lance separate into two parts.
Straight spray by twisting right and fan shape spray Pressure is changeable by pressure adjustment handle.
by twisting left. At low pressure, detergent can be mixed into the spray.
Straight Shape Straight Shape
Fan Shape
INDUSTRIAL ENDOSCOPES
20 / 100GS HD12005 HD12006
30 / 50G・GP − HD26011
30 / 100GS HD13015 HD13001
MACHINES
Fan Shape
※ Sizes for connecting Trigger Gun and Variable Lance are M22 and BSPT 1/4".
Please check the connection portion sizes of your gun and lance. Quick Coupler Joint M22 (HD00135)
For absorbing water by connecting directly to a tap For discharging residual water and pebbles in tank
High
pressure
water
Vacuum state
Suction port
87
CLEANER, PIPE CLEANING,
Hose for connection between body and gun, pipe cleaning hose
With Stainless Steel One - touch Coupler With Quick Coupler High Pressure Hose for High Pressure Cleaner 440
DRAIN CLEANING MACHINES
Refer to P78
With SUS One Action Coupler ■ : Standard ■ : Optional With Quick Coupler ■ : Standard ■ : Optional
Hose for connection between cleaner unit and gun, pipe cleaning hose
88
CLEANER, PIPE CLEANING,
Easy to operate water supply/stop For Hand Gun of 1/4" Pipe Cleaning Hose
1/4" Hand Gun for Pipe Cleaning Hose Variable Nozzle (Removable)
MAINTENANCE
1/4" Connect to Pipe Cleaning Hose. Connect to Hand Gun of 1/4" Pipe Cleaning Hose.
Can be used as a Hand gun with Variable Nozzle.
M22
INDUSTRIAL ENDOSCOPES
Variable Nozzle (removable)
8 / 100GS − HD40001
10 / 100G HD38131 −
MACHINES
Stainless Steel One - touch Coupler : Code No.HD20325 Stainless Steel One - touch Coupler : Code No.HD03174
Connect between High Pressure. To prevent high pressure hose from twisting.
Hose and Pipe Cleaning Hose. Allows smooth rotation even when pressure is applied.
Turn
Turn
360° 360°
For foot operation allowing both hands free for working !! No more twisting !
Smooth rotation – even under pressure
Application Model All Models ※ Except for some models Application Model All Models ※ Except for some models
※ High pressure cleaner 440, Hot water cleaner, 30 / 50G・GP, and 60 / 50GP not applicable. ※ High pressure cleaner 440 not applicable.
89
CLEANER, PIPE CLEANING,
Hose for cleaning drain pipes (Nozzle with reverse jet) Hose for cleaning drain pipes (Nozzle with reverse jet)
Nylon tube with nylon cover- 2 layered structure. Polyurethane tube with polyurethane cover- 2 layered structure.
Resin covered hose prevents pipes and couplers from getting damaged. Flexible and tractable - no bending tendency.
With 4 series snake nozzle applicable to bent pipes. Resin covered hose prevents pipes and couplers from getting damaged.
With 4 series snake nozzle applicable to bent pipes.
12 / 80G ●
INDUSTRIAL ENDOSCOPES
12 / 80G
12 / 80GP
20m ● HD014 HD03015 12 / 80GP 20m ● HD03166 HD03170
20m ● − HD03153 10m ● HD04025 HD04029
15 / 150GS
15 / 150GS 10m ● HD1507 HD04006 16 / 150G・GP
16 / 150G・GP
20m ● HD04026 HD04030
20m ● HD1508 HD04007
13 / 100GS 10m ● HD06031 HD06035
13 / 100GS 10m ● HD1527 HD06006
16 / 200G・GS・GP 20m ● HD06032 HD06036
16 / 200G・GS・GP 20m ● HD1528 HD06007
8 / 100GS 10m ● − HD10006 8 / 100GS 10m ● − HD10029
13 / 150G 13 / 150G 20m ● − HD10030
20m ● − HD10007
21 / 90G・GP 10m ● HD2182 HD08007 21 / 90G・GP 10m ● HD08025 HD08029
23 / 80GS, 20 / 100GS 20m ● HD2183 HD08008 23 / 80GS, 20 / 100GS 20m ● HD08026 HD08030
Hose for cleaning drain pipes (Nozzle with reverse jet) Hose for cleaning drain pipes (Nozzle with reverse jet)
HIGH PRESSURE CLEANING
Nylon tube with stainless steel mesh cover- 2 layered structure. Polyurethane tube with stainless steel mesh & nylon cover- 3 layered structure.
Smooth operation for stainless steel covered hose. Smooth passing in tube for stainless steel mesh layer.
With 4 series snake nozzle applicable to bent pipes. Less resistance and higher thrust than Stainless Steel Pipe Cleaning Hose.
With 4 series snake nozzle applicable to bent pipes.
90
CLEANER, PIPE CLEANING,
Drain Pipe Cleaning Hose (Hose only) Drain Pipe Cleaning Hose (Hose only)
1/4" Pipe Cleaning Hose (screw type) 1/4" PU Pipe Cleaning Hose (screw type)
MAINTENANCE
nylon + nylon Nozzle : 1/8" polyurethane + polyurethane Nozzle : 1/8"
Nylon tube with nylon cover- 2 layered structure. Polyurethane tube with polyurethane cover- 2 layered structure.
Resin covered hose prevents pipes and couplers from getting damaged. Flexible and tractable - no bending tendency.
※ Please use with nozzles on P92. Resin covered hose prevents pipes and couplers from getting damaged.
※ Please use with nozzles on P92.
Applicable for all models except, High pressure cleaner 440, Hot water cleaner, 30 / 100GS, Applicable for all models except, High pressure cleaner 440, Hot water cleaner, 30 / 100GS,
Drain Pipe Cleaning Hose (Hose only) Drain Pipe Cleaning Hose (Hose only)
MACHINES
nylon + stainless steel mesh Nozzle : 1/8" polyurethane + stainless steel mesh + nylon Nozzle : 1/8"
Nylon tube with stainless steel mesh cover- 2 layered structure. Polyurethane tube with stainless steel mesh & nylon cover- 3 layered structure.
Smooth operation for stainless steel covered hose. Smooth passing in tube for stainless steel mesh layer.
※ Please use with nozzles on P92. Less resistance and higher thrust than Stainless Steel Pipe Cleaning Hose.
※ Please use with nozzles on P92.
Applicable for all models except, High pressure cleaner 440, Hot water cleaner, 30 / 100GS, Applicable for all models except, High pressure cleaner 440, Hot water cleaner, 30 / 100GS,
30 / 50G・GP, 60 / 50GP 30 / 50G・GP, 60 / 50GP
91
CLEANER, PIPE CLEANING,
Reverse jet nozzle for cleaning drain pipes Reverse jet nozzle for cleaning drain pipes
1/4" Reverse Jet Nozzle M type 1/4" Reverse Jet Nozzle M2 type
MAINTENANCE
1/8" screw Shorter and bigger diameter than M2 type for resistant to curves. 1/8" screw Longer and smaller diameter than M type for thin pipes.
ø17.0mm ø12.0mm
Applicable Model Code No. No. of Backward Holes Applicable Model Code No. No. of Backward Holes
12 / 80G・GP HD00152 4 12 / 80G・GP HD00153 4
HD38121 HD38122
DRAIN CLEANING MACHINES
Reverse jet nozzle for cleaning drain pipes Reverse jet nozzle for cleaning drain pipes
1/4" Reverse Jet Nozzle T type 1/4" Reverse Jet Nozzle T type with front jet
1/8" screw Sharp head design good for clogging. 1/8" screw Reverse jet nozzle with front jet.
ø15.0mm ø15.0mm
Applicable Model Code No. No. of Backward Holes Applicable Model Code No. No. of Holes
12 / 80G・GP HD00154 4 12 / 80G・GP HD00161 front 1・back 3
10 / 100G, 13 / 100GS, 16 / 200G・GP・GS HD38123 4 10 / 100G, 13 / 100GS, 16 / 200G・GP・GS HD38130 front 1・back 3
8 / 100GS, 13 / 150G HD27007 4 8 / 100GS, 13 / 150G HD27018 front 1・back 3
15 / 150GS, 16 / 150G・GP HD04051 4 15 / 150GS, 16 / 150G・GP HD04063 front 1・back 3
23 / 80GS, 21 / 90G・GP, 20 / 100GS HD08052 5 23 / 80GS, 21 / 90G・GP, 20 / 100GS HD08064 front 1・back 4
Reverse jet nozzle for cleaning drain pipes Reverse jet nozzle for cleaning drain pipes
HIGH PRESSURE CLEANING
1/4" Serially Connected Nozzle M type 1/4" Serially Connected Nozzle M2 type
1/8" screw Turn 360°. 1/8" screw Turn 360°.
MACHINES
Shorter and bigger diameter than M2 type for resistant to curves. Longer, and smaller diameter than M type for thin pipes.
stainless steel stainless steel
65.0mm 70.0mm
ø17.0mm ø12.0mm
Applicable Model Code No. No. of Backward Holes Applicable Model Code No. No. of Backward Holes
12 / 80G・GP HD00156 4 12 / 80G・GP HD00157 4
10 / 100G, 13 / 100GS, 16 / 200G・GP・GS HD38125 4 10 / 100G, 13 / 100GS, 16 / 200G・GP・GS HD38126 4
8 / 100GS, 13 / 150G HD27009 4 8 / 100GS, 13 / 150G HD27010 4
15 / 150GS, 16 / 150G・GP HD04053 4 15 / 150GS, 16 / 150G・GP HD04054 4
23 / 80GS, 21 / 90G・GP, 20 / 100GS HD08054 5 23 / 80GS, 21 / 90G・GP, 20 / 100GS HD08055 5
Reverse jet nozzle for cleaning drain pipes Reverse jet nozzle for cleaning drain pipes
1/4" Serially Connected Nozzle M type (pin type) 1/4" Rotating Nozzle
1/8" screw Tunr in 2 directions. (180°) 1/8" screw Clean pipes with rotating.
Easy to turn the direction.
stainless steel stainless steel 36.0mm
80.0mm
ø12.0mm ø19.0mm
Applicable Model Code No. No. of Backward Holes Applicable Model Code No. No. of Holes
12 / 80G・GP HD00158 4 8 / 100GS, 12 / 80G・GP
10 / 100G, 13 / 100GS, 16 / 200G・GP・GS HD38127 4 10 / 100G, 13 / 100GS, 13 / 150G, 15 / 150GS, HD00155 side 2・back 2
8 / 100GS, 13 / 150G HD27011 4 16 / 150G・GP, 16 / 200G・GP・GS
15 / 150GS, 16 / 150G・GP HD04055 4
23 / 80GS, 21 / 90G・GP, 20 / 100GS HD08056 5 23 / 80GS, 21 / 90G・GP, 20 / 100GS HD08053 side 2・back 3
92
TECHNICAL INFORMATION
TECHNICAL INFORMATION
Causes & solutions of defective threads Some of these defective threads may happen while threading
Thinner threads
Smaller
Chipped threads
Larger
Position of
standard
diameter
F side surface
Tolerance
a : Standard length from the edge of pipe The lenght of the effective part of thread, under condition of correct
b : Acceptable space from the edge of pipe threading diameter is 0 or 2 tips from the F side surface.
f : The length of thr effective part of thread that exceeds
※There is difference in the length of the effective part of thread among
the position of standard diameter
companies so that it is advised to let 2tips
Correct usage of power supply Use correct voltage and enough capacity
It is advised to use powerful generator Using thin extension cord causes voltage
of 2KVA, 2.5KVA, 3KVA or upper. drop.
In particularly, using generator of over It is advised to use extension cor do of
3KVA for Beaver 50 & 80. 2.0mm2 or 3.5mm2 thick of 3 core cabtyre
cord to keep the voltage drop smaller.
94
TECHNICAL INFORMATION
Taper pipe threads (JIS B0203 : 1999) (BSPT)
Basic Thread Profile, Basic Dimensions and Tolerances
Basic profile applied for taper external and taper internal threads Basic profile applied fo rparallel internal threads
H’
6
r’
r
h
2
H
2
h
2
h
H’
27.5 O O
27.5 27.5 O O
27.5
h
H
h
2
r
h
2
55 O 55 O
r’
H’
H
2
D1
D2
P
D
P
90 O
90 O
Axis of threads
l Axis of threads
16
Thick solid line shows the basic thread profile. Thick solid line shows the basic thread profile.
P= 25.4
n P= 25.4
n
H=0.960 237 P H=0.960 491 P
h=0.640 327 P h=0.640 327 P
Fitting between taper external thread and taper internal or parallel internal thread
l’
D1
t
a f
95
Taper pipe threads (JIS B0203) (BSPT)
TECHNICAL INFORMATION
Unit mm
Thread Gauge Diameter Position of Gauge plane Lenght of effective thread (min.)
n P
(Informative)
h r' D D2 D1 a ±b ±c f I I
(Informative)
t
R1/16 28 0.9071 0.581 0.12 7.723 7.142 6.561 3.97 0.91 1.13 0.071 2.5 6.2 7.4 4.4 − −
R1/8 28 0.9071 0.581 0.12 9.728 9.147 8.566 3.97 0.91 1.13 0.071 2.5 6.2 7.4 4.4 10.5 2.0
R1/4 19 1.3368 0.856 0.18 13.157 12.301 11.445 6.01 1.34 1.67 0.104 3.7 9.4 11.0 6.7 13.8 2.3
R3/8 19 1.3368 0.856 0.18 16.662 15.806 14.950 6.35 1.34 1.67 0.104 3.7 9.7 11.4 7.0 17.3 2.3
R1/2 14 1.8143 1.162 0.25 20.955 19.793 18.631 8.16 1.81 2.27 0.142 5.0 12.7 15.0 9.1 21.7 2.8
R3/4 14 1.8143 1.162 0.25 26.441 25.279 24.117 9.53 1.81 2.27 0.142 5.0 14.1 16.3 10.2 27.2 2.8
R1 11 2.3091 1.479 0.32 33.249 31.770 30.291 10.39 2.31 2.89 0.181 6.4 16.2 19.1 11.6 34.0 3.2
R11/4 11 2.3091 1.479 0.32 41.910 40.431 38.952 12.70 2.31 2.89 0.181 6.4 18.5 21.4 13.4 42.7 3.5
R11/2 11 2.3091 1.479 0.32 47.803 46.324 44.845 12.70 2.31 2.89 0.181 6.4 18.5 21.4 13.4 48.6 3.5
R2 11 2.3091 1.479 0.32 59.614 58.135 56.656 15.88 2.31 2.89 0.181 7.5 22.8 25.7 16.9 60.5 3.8
R21/2 11 2.3091 1.479 0.32 75.184 73.705 72.226 17.46 3.46 3.46 0.216 9.2 26.7 30.1 18.6 76.3 4.2
R3 11 2.3091 1.479 0.32 87.884 86.405 84.926 20.64 3.46 3.46 0.216 9.2 29.8 33.3 21.1 89.1 4.2
R4 11 2.3091 1.479 0.32 113.030 111.551 110.072 25.40 3.46 3.46 0.216 10.4 35.8 39.3 25.9 114.3 4.5
R5 11 2.3091 1.479 0.32 138.430 136.951 135.472 28.58 3.46 3.46 0.216 11.5 40.1 43.5 29.3 139.8 4.5
R6 11 2.3091 1.479 0.32 163.830 162.351 160.872 28.58 3.46 3.46 0.216 11.5 40.1 43.5 29.3 165.2 5.0
(※1) This designation is for taper external threads, and for taper internal threads and parallel internal threads, the notation R shall be substituted by Rc or Rp.
Remarks 1. The symbols for pipe threads (R, Rp and Rc) can be omitted if necessary.
2. Thread shall be measured at perpendicular to the axis and pitch shall be measured in parallel with the axis.
3. The length of useful thread is the length of completely screwed parts, except the last several threads which may be truncated at the crest by its intersction with the
cylindrical surface of the pipe or coupler.
4. The chamfered end of the pipe or coupler, is included in the length of usuful thread part.
96
Steel Pipe (JIS G3452・3454)
TECHNICAL INFORMATION
Type of steel pipe Steel Galvanized Pipe (SGP) Steel Tube Pipe General (STPG)
Nominal Size Schedule
O / D (mm) Thickness (mm) O / D (mm)
(A) (B) 10 20 30 40 60 80
6 1/8 10.5 2.0 10.5 1.7 2.2 2.4
8 1/4 13.8 2.3 13.8 2.2 2.4 3.0
10 3/8 17.3 2.3 17.3 2.3 2.8 3.2
15 1/2 21.7 2.8 21.7 2.8 3.2 3.7
20 3/4 27.2 2.8 27.2 2.9 3.4 3.9
25 1 34.0 3.2 34.0 3.4 3.9 4.5
32 11/4 42.7 3.5 42.7 3.6 4.5 4.9
40 11/2 48.6 3.5 48.6 3.7 4.5 5.1
50 2 60.5 3.8 60.5 3.2 3.9 4.9 5.5
65 21/2 76.3 4.2 76.3 4.5 5.2 6.0 7.0
80 3 89.1 4.2 89.1 4.5 5.5 6.6 7.6
90 31/2 101.6 4.2 101.6 4.5 5.7 7.0 8.1
100 4 114.3 4.5 114.3 4.9 6.0 7.1 8.6
125 5 139.8 4.5 139.8 5.1 6.6 8.1 9.5
150 6 165.2 5.0 165.2 5.5 7.1 9.3 11.0
175 7 190.7 5.3 − − − − −
200 8 216.3 5.8 216.3 6.4 7.0 8.2 10.3 12.7
225 9 241.8 6.2 − − − − − −
250 10 267.4 6.6 267.4 6.4 7.8 9.3 12.7 15.1
300 12 318.5 6.9 318.5 6.4 8.4 10.3 14.3 17.4
350 14 355.6 7.9 355.6 6.4 7.9 9.5 11.1 15.1 19.0
400 16 406.4 7.9 406.4 6.4 7.9 9.5 12.7 16.7 21.4
450 18 457.2 7.9 457.2 6.4 7.9 11.1 14.3 19.0 23.8
500 20 508.0 7.9 508.0 6.4 9.5 12.7 15.1 20.6 26.2
550 22 − − 558.8 6.4 9.5 12.7 15.9 − −
600 24 − − 609.6 6.4 9.5 14.3 − − −
650 26 − − 660.4 7.9 12.7 − − − −
97
World Network
■ • • • Sales Network
INUYAMA FACTORY
ASADA CORPORATION
INDIA PRIVATE LIMITED
SHANGHAI ASADA
IMP. & EXP. CO., LTD.
ASADA - AARONCO
MACHINERY (M) SDN BHD.
98
Domestic Network
HEAD OFFICE
SAPPORO
SENDAI
SAITAMA
YOKOHAMA
TOKYO
Doctor Homes TOKYO
HIROSHIMA
NAGOYA
FUKUOKA Doctor Homes NAGOYA
OSAKA
Doctor Homes OSAKA
www.asada.co.jp
Products Movie
Electronic Catalog
Operation Manual
MSDS
Note
● Asada Corporation reserves the right to change specifications, spare parts and accessories without prior notice.
Guarantee
● Every Asada equipment is thoroughly inspected and tested before shipment from the factory.
● It is guaranteed against defects in materials or workmanship.
● To take advantage of this guarantee, the COMPLETE product must be delivered prepaid to Asada or any Asada Authorized Service Center.
● If inspection shows trouble is caused by defective workmanship or material, all repairs will be made without charge.
99
Distributed by
www.asada.co.jp