Professional Documents
Culture Documents
Guide To Designing Structures in Etabs 2016 by Anil Suthar PDF
Guide To Designing Structures in Etabs 2016 by Anil Suthar PDF
Guide To Designing Structures in Etabs 2016 by Anil Suthar PDF
GUIDE TO
ETABS 2016
MULTI-STOREY BUILDING DESIGN
The one thing that matters the most in
Structural design software is
ABSOLUTELY NOT!
Other than design checks you don't have to
Apply DL+LL+EQ+WL
using IS Codes as per site conditions
01
BEAM-COLUMN
CENTERLINE PLAN
Once you have prepared the
architectural plan start placing
the columns at the desired location
following the column placement rules.
Join the columns with the help of beams.
C nC
&
ST our
EE se
L
www.fieldReady.co.in
STEP
02
This step is really important step if you want to model the structure
very quickly in Etabs using it quick draw tools. Without grid lines, you
will not be able to place beams and columns precisely to its location.
STEP
03
Concrete & Rebar Properties with Beam
Column sizes
Once you have entered the referenced grids and entered into
the Etabs you need to provide Material properties as per your
project demands. Prominently these are Concrete fck & Steel
fy,fu. Once the material properties are entered, define Beam,
Column sizes in the Frame section list of Etabs.
To know what Mix ratio to use & the steel properties visit www.fieldReady.co.in
04
05
APPLY DL+LL+EQ+WL
To learn how engineers are using Revit to perform the task in half the time interval visit
www.fieldReady.co.in
R esig
C
D
C nC
&
ST our
EE se
L
www.fieldReady.co.in
R ivi
ev l &
it
C
20 Ar
17 ch
C itec
ou t
rs
e
www.fieldReady.co.in
Anil Suthar
Structural Engineer
CEO of fieldReady
+918107449932
www.fieldReady.co.in