Bearings And Bearing Metals: A Treatise Dealing with Various Types of Plain Bearings, the Compositions and Properties of Bearing Metals, Methods of Insuring Proper Lubrication, and Important Factors Governing the Design of Plain Bearings
High Capacity K2 Clutch Piston Kit Retaining Part No. Ring 99582-01K • Piston • Backing Plate .170" Thick Backing • Retaining Ring .062" Thick Plate
Piston
NOTE: Typical clearance with OE parts is .010–.014" per friction plate.
1. Install piston into clutch housing using normal assembly procedures.
2. Assemble clutches and steels into clutch housing, adding one additional friction plate and one additional steel plate for a total of 6 frictions and 6 steels. 3. Install backing plate and OE retaining ring. 4. Apply clutch a few times with Sonnax Backing Plate air pressure. OE Backing Plate Sonnax Retaining 5. Check clutch clearance, Ring target clearance is .060–.084". 6. If additional clearance is needed, replace OE retaining ring with thinner Sonnax retaining ring.
Bearings And Bearing Metals: A Treatise Dealing with Various Types of Plain Bearings, the Compositions and Properties of Bearing Metals, Methods of Insuring Proper Lubrication, and Important Factors Governing the Design of Plain Bearings