Professional Documents
Culture Documents
102 Us-En PDF
102 Us-En PDF
Installation Systems
Superior Products
Superior-Quality Products
MAPEI is an ISO 9001-2000 certified company. Our products are produced according
to exacting standards, strictly adhering to process and procedural guidelines with
documented compliance. This rigid production format is vigilantly followed to ensure
that every product is produced uniformly from batch to batch.
Technical Expertise
An in-house Technical Services Call Center responds to customers’ telephone inquiries
with answers to installation challenges in real time. In addition, Regional Technical
Services Field Consultants provide field support, specializing in on-site employee
training and jobsite product application oversight.
• One-call resolution
2
Innovative Research & Development
Table of
Introduction
Worldwide, more than 12% of MAPEI employees are involved in
the development of new technologies and product innovations,
keeping our customers at
Contents
the forefront of the flooring
industry. The company Quick-Reference Charts and Guides
has taken the additional 4 Surface-Preparation Products
initiative of focusing its R&D 5 Waterproofing
efforts on environmentally 5 Crack Isolation and Sound Reduction
sustainable solutions. 6 Setting Products
7 Grouts
To remain on the cutting 7 ISO 13007 Standards Product Classifications
edge of innovation, MAPEI 8 Index to Technology Logos
reinvests 5% of its annual
Table of Contents
revenues into researching Surface-Preparation Products
and developing new 8-9 Mud Bed and Repair Systems
products and technologies. 10 Admixture
This corporate priority has produced such innovations as: 10-11 Patching Compounds, Skimcoats and Additives
12 Bond-Promoting Primer
• Low-Dust Technology, which reduces dust by up to 90% 12-13 Primers for Self-Leveling
during the pouring and mixing of cementitious products, 14-15 Self-Leveling Underlayments
thus contributing to a cleaner jobsite. 15-16 Moisture Control
VCT/Cutback Adhesive
(Pages 8-19)
Specifications
Gypsum Wallboard
(or Fast-Drying)
Cement Backer
Ceramic Tile*
Fast-Setting
Unit (CBU)
Concrete
Exterior
Interior
Product Name and Description
Steel
Mapecem ® Quickpatch
High-Performance, High-Flow Concrete Patch • • • • N/A
Patching Compounds
Planipatch ®
Fast-Setting, Polymer-Modified, Cement-Based
Patching Compound
• • • • N/A
Planipatch Plus ™
High-Performance Additive for Planipatch • • • • • • N/A
4 to 1 with Planicrete® AC
Admixture
Sand and Cement Mortar Mix, with Acrylic Latex Admixture for
Mortar and Concrete
• • • N/A
Mapecem Premix
Fast-Setting Screed Mortar • • • • N/A
Promoting
• • • • • • • • •
Bond-
N/A
Multipurpose Bond-Promoting Primer
N/A
High-Performance, Quick-Setting, Self-Leveling Underlayment
Novoplan ® Easy – 1/8" to 1" (3 mm to 2,5 cm)
Easy-Preparation, Self-Leveling Underlayment • • • • • • N/A
ANSI A118.10,
Mapelastic ™ AquaDefense (MAPEI's Reinforcing Fabric optional)
Premium Waterproofing and Crack-Isolation Membrane • • • • • • • • IAPMO, ANSI
A118.12
Waterproofing Membranes
ANSI A118.10,
Mapelastic 315 (use Fiberglass Mesh)
Professional, Cement-Based Waterproofing Membrane • • • • • • • IAPMO, ANSI
A118.12
ANSI A118.10,
Mapelastic HPG (use Fiberglass Mesh)
Flexible Waterproofing and Crack-Isolation Membrane • • • • • • IAPMO, ANSI
A118.12
Crack Isolation
ANSI A118.12;
and Sound
Reduction
Mapeguard ™ 2
Premium Crack-Isolation and Sound-Reduction Sheet Membrane • • • • • • ASTM E492-
04, E90-04,
E2179-03
Planiseal Easy
Standard Fresh Concrete Treatment • • N/A
* Properly prepared
See Technical Data Sheets for additional information. Test in a small area, as resins may stain or leave residue on surface.
4
Surface-Preparation Products
Waterproofing Base Required Application Tools
(Pages 16-18)
Crack Isolation
Specifications
(Long-Term)
Flood Test
Exterior
Cement
Interior
Acrylic
Trowel
Fabric
Roller
Brush
Mesh
Product Name and Description
ANSI A118.12,
Mapelastic ™ AquaDefense Up to
(MAPEI's Reinforcing Fabric optional)
Premium Waterproofing and Crack-Isolation Membrane
• • • • • • • 30 to 50
minutes
12 hours 1/8"
(3 mm)
ANSI A118.10,
IAPMO, ASTM
C627
ANSI A118.12,
Mapelastic 400 (use MAPEI's Reinforcing Fabric) Up to
Professional, Liquid-Rubber Waterproofing and Crack-
Isolation membrane
• • • • • • • 1 to 3
hours
48 hours 1/8"
(3 mm)
ANSI A118.10,
IAPMO, ASTM
C627
Waterproofing
ANSI A118.12,
Mapelastic 315 (use Fiberglass Mesh) Up to
Professional, Cement-Based
Waterproofing Membrane
• • • • • • 8 to 12
hours
72 hours 1/16"
(1,5 mm)
ANSI A118.10,
IAPMO, ASTM
C627
Sound Reduction
Porcelain Tile (with Ceiling
(Peel-and-Stick)
(without Ceiling and with
and 6" [15 cm] Concrete
(Page 18-19)
Primer Required
Crack Isolation
Specifications
Porcelain Tile
Thickness
Roll Size
Exterior
Interior
Floor)
Reduction
(Light Commercial)
47 IIC, Up to ANSI A118.12
Mapeguard ™ 2 64 IIC,
Premium Crack-Isolation and Sound-Reduction Sheet Membrane 66 STC
52 STC,
16 Delta IIC
• • 40 mils 3/8"
(10 mm)
• 39.4" x 68.6'
(1 x 20,9 m)
& ASTM C627
(Extra Heavy)
Up to ANSI A118.12
Mapelastic CI
Professional Crack-Isolation Membrane • • 15 mils 1/8"
(3 mm)
& ASTM C627
(Extra Heavy)
Moisture-Sensitive Stone
(residential/commercial)
(Pages 20-29)
VCT/Cutback Adhesive
Exterior (commercial)
Exterior (residential)
Gypsum Wallboard*
Water Immersion
Exterior Facades
or Larger Tile
Ceramic Tile
Fast-Setting
Porcelain
Concrete
Plywood
Ceramic
Product Name
Interior
ISO 13007
ANSI
Steel
and Description Classification
Granirapid ® System
Premium, Rapid-Setting, Flexible
Tile Mortar
• • • • • • • • • • • • • • • • • C2FS2P2
A118.4,
A118.11
Kerabond/Keralastic™
System
Premium Flexible Tile Mortar
• • • • • • • • • • • • • • • • C2ES2P2
A118.4,
A118.11
Kerabond T / Keralastic™
System Premium Large-Format
Tile Mortar with Polymer
• • • • • • • • • • • • • • • • C2ES2P2
A118.4,
A118.11
Ultraflex™ LFT
Premium Large-Format Tile Mortar
with Polymer
• • • • • • • • • • • • • • • C2TES1P1
A118.4,
A118.11
Ultralite Mortar ™
Premium, Lightweight Tile Mortar
with Polymer
• • • • • • • • • • • • • C2TES1P1
A118.4,
A118.11
Ultraflex ™ 3
Premium Tile Mortar with Polymer • • • • • • • • • • • • • • • C2ES1P1
A118.4,
A118.11
Ultraflex RS
Premium Rapid-Setting Tile Mortar
with Polymer
• • • • • • • • • • • • • C2FP1
A118.4,
A118.11
Ultraflex 2
Professional Tile Mortar with Polymer • • • • • • • • • • • • C2EP1
A118.4,
A118.11
Ultraflex 1
Standard Tile Mortar with Polymer • • • • • • • • • C2E
A118.4,
A118.11
Kerapoxy ® 410
Premium, 100%-Solids Epoxy-Setting
Mortar
• • • • • • • • • • • • • • • R2T A118.3
Adesilex P10
Premium Glass Tile Mortar with
Polymer
• • • • • • • • • C2TE A118.4
Type 1 ™
Premium Tile Adhesive –
walls 12" x 12" (30 x 30 cm), • • • • • • • D1TE
A136.1,
Type 1
floors 6" x 6" (15 x 15 cm)
Ker ® 909
Professional Tile Adhesive –
walls 8" x 8" (20 x 20 cm), floors 6" x 6" • • • • • • • D1TE
A136.1,
Type 1
(15 x 15 cm)
* Properly prepared
6
Grouts Application
(Pages 29-32)
Exterior (commercial)
Chemical Resistance
Exterior (residential)
Interior (residential/
Setting Products
Grouting Polished
Water Immersion
Stones/Marble
< 1/8" (3 mm)
commercial)
Grout Joints
Fast-Curing
Industrial
ISO 13007
Product Name and Description ANSI
Classification
Kerapoxy ® CQ
Premium Epoxy Grout and Mortar with Coated Quartz • • • • • • • • R2/RG A118.3
Opticolor ™
Optimum-Performance, Stain-Free Grout • • • • • • RG A118.3
Kerapoxy IEG
100%-Solids, Industrial-Grade Epoxy Grout • • • • • • • RG A118.3
Kerapoxy
Premium Epoxy Mortar and Grout • • • • • • • • R2/RG A118.3
Ultracolor ® Plus
Premium, Rapid-Setting Sanded Grout with Polymer • • • • • • CG2WAF A118.6, A118.7
Keracolor ™ S
Premium Sanded Grout with Polymer • • • • CG2WA A118.6
Keracolor U
• • • • • • CG2WA A118.6
Grouts
Premium Unsanded Grout with Polymer
See Technical Data Sheets for additional information. Test in a small area, as resins may stain or leave residue on surface.
TYPES CLASSES
SPECIAL
CHARACTERISTICS
Helping you choose
C = Cementitious
(Thin-set mortars)
1 = Normal F = Fast-setting the right products
more precisely
2 = Improved T = Slip-resistant
E = Extended open time
Product Classifications
ISO 13007 Standards
S1 = Deformable
The tile and stone installation industry has entered a new age that is
S2 = Highly deformable
bringing simplicity and consistency to the architect’s task of specifying
Adhesives
P1 = Plywood adhesion
the right product for the right job. The ISO 13007 Standards for Adhesives
P2 = Improved plywood
adhesion and Grouts make it easier for architects to describe what characteristics
they want in the installation products they select for use under the
D = Dispersion 1 = Normal A = Accelerated-drying
conditions affecting each particular project. The objectivity that architects
(Mastics) 2 = Improved dispersion adhesive
can now include in their specifications will reverberate through the entire
F = Fast-drying
installation network.
T = Slip-resistant
E = Extended open time
The ISO 13007 Standards employ a classification coding system of
R = Reaction resin 1 = Normal T = Slip-resistant letters and numbers that indicates to architects, contractors, installers
( Epoxies and 2 = Improved and distributors exactly which adhesive and grout performance
urethanes) requirements must be met for a particular job. MAPEI is displaying the
coding on its packaging and literature so customers can easily see which
SPECIAL
TYPES CLASSES product(s) they should purchase to meet their needs. The chart at the left
CHARACTERISTICS
demonstrates the ease of using this coding system.
CG = Cementitious 1 = Normal F = Fast-setting
Grouts
Index to
Technology
Logos
Products developed with
MAPEI’s “green innovation”
are LEED-compliant, helping
to contribute valuable
points toward LEED-
certified projects.
Products featuring
High-Hydrated Cement
Technology (HCT ™) offer
high early strength, excellent
workability, ultra fast curing,
unmatched long-term
durability and efflorescence-
free curing. ProductProduct Packaging ProductProduct Packaging
Code Code Packaging Code Code Packaging
U.S. 2060040 Bag: 44 lbs. (20 kg) U.S./ 2060019 Bag: 40 lbs. (18,1 kg)
Canada
MAPEI mortars with Easy Canada 206004021 Bag: 44 lbs. (20 kg)
Glide Technology offer
extreme ease of application,
yielding a buttery consistency
that reduces fatigue during
troweling.
8
Index to Technology Logos
Mud Bed and Repair Systems
Topcem™ Premix 4 to 1™ Mud Bed Mix Mapelath™
Ready-to-Use, Accelerated-Cure Screed Sand and Cement Mortar Mix Synthetic Lath
Topcem Premix is a ready-to-use mortar 4 to 1 is a preblended mixture of finely graded Mapelath is a lightweight, noncorroding, alkali-
requiring only the addition of water. Topcem sand and Portland cement used for thick-bed resistant synthetic lath used as a substitute for
Premix is suitable in both bonded and unbonded, mortar installations. 4 to 1 flattens and levels an traditional metal lath. It is lighter and easier to
interior and exterior applications. Topcem Premix existing substrate before the installation of tile work with.
has an accelerated cure, allowing for installation and stone.
of ceramic flooring in 24 hours after placement,
and nonbreathable flooring systems in 48 hours.
Topcem Premix can easily be screeded or
sloped, and has the workability and working time
of conventional mortars but with a much faster
curing time. It is ideal for interior or exterior
repairs such as filling trenches, re-sloping
balconies, and forming screeds that may or may
not receive subsequent flooring installations.
10
Admixture
Skimcoats and Additives
Patching Compounds,
Planipatch ® Planipatch Plus™ Mapecem ® Quickpatch
Fast-Setting, Polymer-Modified, High-Performance Additive for High-Performance, High-Flow
Cement-Based Patching Compound Planipatch® Concrete Patch
Planipatch is an ultra fast-drying, self-curing, Planipatch Plus is an acrylic latex additive for use Mapecem Quickpatch is a versatile, fast-setting,
polymer-modified, cement-based patching with Planipatch. When Planipatch is mixed with cementitious material used for the patching of
compound that rapidly develops high Planipatch Plus, the Planipatch Plus System can interior/exterior concrete surfaces including
compressive strength. When Planipatch is mixed be used as an embossing leveler or as a patch concrete floors, driveways, sidewalks and
with Planipatch Plus, the Planipatch Plus System to fill voids over properly prepared vinyl sheet concrete pads. Mapecem Quickpatch features
can be used as an embossing leveler or as a goods, vinyl composition tile (VCT) and cement extraordinary ease of placement, with a variable
patch to fill voids over properly prepared vinyl terrazzo before the direct glue-down installation water ratio and outstanding workability. Light
sheet goods, vinyl composition tile (VCT) and of floor coverings. gray Mapecem Quickpatch can be applied
cement terrazzo before the direct glue-down from featheredge to 3" (7,5 cm) for ramping
installation of floor coverings. or filling. That makes it ideal for restoring
weathered, damaged concrete surfaces to a
uniform, superior-wearing and better-than-new
appearance. When used for horizontal substrate
repair before application of self-leveling
underlayments, Mapecem Quickpatch sets fast
for easy and cost-efficient repairs, minimizing
jobsite turnaround time.
Before
12
Bond-Promoting Primer
Primers for Self-Leveling
Primer E ™ Primer L ™ Primer WE ™
High-Performance, 100%-Solids Advanced-Technology, Acrylic Latex Water-Based Epoxy Primer
Epoxy Primer Primer for Concrete Primer WE is a two-component, polymer-
Primer E is a two-component, 100%-solids Primer L is a concentrated, solvent-free modified, solvent-free, water-based epoxy primer
epoxy primer and bonding agent designed for acrylic primer used before the installation of for enhanced adhesion to nonporous substrates
use with MAPEI self-leveling underlayments and underlayments and topping materials. It is before the application of MAPEI self-leveling
toppings. Primer E is the most effective method green for easy identification. Primer L improves materials. When mixed, Primer WE is purple for
for bonding to nonporous, dense substrates the bond between a properly prepared and easy identification. It improves adhesion over
before installing self-leveling underlayments profiled concrete substrate, and self-leveling smooth, nonabsorbent and difficult-to-bond-to
or toppings subject to high stress. Primer E underlayment or topping materials. substrates such as properly prepared ceramic
is highly recommended for all installations of tile, cement-based terrazzo, old cutback adhesive
decorative toppings (such as Ultratop ®), which residue and approved plywood subfloors.
demand the highest degree of crack resistance
and surface finish. Primer E ’s low viscosity
makes installation fast and easy, and provides
excellent penetration into the substrate and
therefore tenacious bond.
14
Moisture Control
Self-Leveling Underlayments
Moisture Control
Ultraplan ® 1 Plus Ultraplan ® Easy Planiseal ™ EMB
High-Performance, Quick-Setting, High-Performance, Easy-Preparation, Premium Epoxy Moisture Barrier for
Self-Leveling Underlayment Self-Leveling Underlayment Concrete Substrates
Ultraplan 1 Plus is an HCT™ (High-Hydrated Ultraplan Easy is an HCT™ (High-Hydrated Planiseal EMB is a high-performance,
Cement Technology)-based, quick-setting, Cement Technology)-based, quick-setting, 100%-solids, two-part epoxy, one-coat moisture
self-leveling, self-drying underlayment and repair self-leveling underlayment that typically requires barrier system for concrete slabs that exhibit
mix for interior concrete and engineer-approved only a clean, soundly bonded substrate before moisture vapor emission rates (MVERs) up to
floors. Ultraplan 1 Plus has high strength and is application. Typically requiring reduced surface 25 lbs. per 1,000 sq. ft. (11,3 kg per 92,9 m2) per
abrasion-resistant, able to withstand light foot preparation, Ultraplan Easy provides lower 24 hours and reduces transmission rates to less
traffic after 2 to 3 hours and vehicular rubber- installation costs and fast turnaround on jobsites. than 3 lbs. (1,36 kg). Planiseal EMB ’s unique
wheel traffic after 3 days. It features high strength and is able to withstand formulation penetrates into the concrete substrate
light foot traffic after 2 to 3 hours of installation. while creating a solid film layer on the surface for
the ultimate in moisture transmission reduction.
Planiseal EMB can also be used at different
coverage rates, depending on the level of
moisture vapor emission control required.
M O L D A N D M I L D E W R E S I S TA N C E M O L D A N D M I L D E W R E S I S TA N C E M O L D A N D M I L D E W R E S I S TA N C E
16
Moisture Control
Waterproofing Membranes
Fiberglass Mesh
M O L D A N D M I L D E W R E S I S TA N C E
ANSI A118.12
18
Waterproofing Membranes
Crack Isolation and
Sound Reduction
Mapesonic™ 2 MAPEI SM Primer™ Mapelastic™ CI
Premium Sound-Reduction and Water-Based Primer for MAPEI Peel-and- Professional Crack-Isolation Membrane
Crack-Isolation Sheet Membrane Stick Membranes Mapelastic CI is a premixed, liquid-rubber, quick-
Mapesonic 2 is a patent-pending, next- MAPEI SM Primer is a ready-to-use, fast-drying, drying crack-isolation membrane for installation
generation, flexible thin, 76-mil (1,93-mm) water-based, latex primer for use under MAPEI’s under ceramic tile or stone in residential and
lightweight, load-bearing, fabric-reinforced peel-and-stick sheet membranes on residential commercial interior and exterior environments.
“peel-and-stick” sound-reduction and crack- and commercial indoor or outdoor floors. MAPEI Mapelastic CI meets ANSI A118.12 requirements,
isolation membrane. After application, ceramic
SM Primer greatly increases the bond of MAPEI’s provides up to 1/8" (3 mm) of in-plane crack
tile or stone can be installed immediately with
peel-and-stick sheet membranes to concrete, isolation and dries after about 30 to 50 minutes.
recommended MAPEI polymer-modified cement-
plywood and other approved, properly prepared It is then ready to receive most MAPEI polymer-
based mortar, or glue-down wood flooring can be
immediately installed with any MAPEI urethane floors. It can be applied with a roller or brush, is modified or epoxy mortars.
or hybrid-polymer-based wood adhesive. white in color and dries clear.
ANSI A118.4 and ANSI A118.11 ANSI A118.4 and ANSI A118.11
Premium, Rapid-Setting, Flexible Premium Flexible Tile Mortar Premium Flexible Medium-Bed
Tile Mortar Kerabond/Keralastic System is a high- Tile Mortar
Granirapid is the next generation of high- performance, two-part system: Keralastic™, a Kerabond T / Keralastic System is a high-
performance, flexible mortar systems. As the second-generation “flexible” acrylic latex additive, performance, two-part system: Keralastic, a
industry’s first and only fast-curing system is used to enhance the performance of Kerabond ™, second-generation “flexible” acrylic latex additive,
geared for fast-track projects, it develops which is a premium-grade dry-set mortar. This is used to enhance the performance of Kerabond T,
high, early mechanical strength and can be system has exceptional bond strength, flexural which is a premium-grade medium-bed mortar.
specified for the same demanding applications strength, elongation and freeze/thaw durability. This system has exceptional bond strength,
as Keralastic™. However, Granirapid will cure To ensure proper flexibility, always use a latex flexural strength, elongation and freeze/thaw
considerable faster because of its superior additive when applying a dry-set mortar over durability. To ensure proper flexibility, always use
drying-out characteristics, which produce low plywood or to set nonvitreous tiles. a latex additive when applying a dry-set mortar
residual moisture behind the tile after 24 hours, over plywood or to set nonvitreous tiles.
and does not contribute to efflorescence. When
installed in conjunction with Ultracolor ® Plus
grout, Granirapid will allow water submersion in
a revolutionary 72 hours.
WITH ISO
NCE
IN COMPLIANCE WITH ISO STANDARDS
IN COMPLIANCE WITH ISO STANDARDS ST
IN COMPLIANCE EN CONFORMITÉ
EN CONFORMITÉ LIA A
IN COMPLIANCE AVEC LES NORMES ISO
MP
ND
WITH ISO STANDARDS AVEC LES NORMES ISO WITH ISO STANDARDS
IN CO
ARD
ISO 13007 C2FS2P2 ISO 13007 C2ES2P2 ISO 13007 C1T C1T
EN CONFORMITÉ AVEC LES NORMES ISO
P2
EN CONFORMITÉ AVEC LES NORMES ISO
C2F S2 P2 S2
S
ES
C
20
Polymer-Modified Mortars
CE WITH ISO ST
WITH ISO IAN
NCE
AN
ST PL ITÉ AVEC LES
NO D
LIA
IN COMPLIANCE IN COMPLIANCE M M IN COMPLIANCE
A OR R
AR ES IS
EN C N CO
DS
F
ND
M
ON
EN CONFORMITÉ AVEC LES NORMES ISO EN CONFORMITÉ AVEC LES NORMES ISO
IN CO
S1 C2TF S1 C2TE S1
O
S
ISO 13007 ISO 13007 ISO 13007 ISO 13007 ISO 13007
ES
C
EN NT HES DÉFORMABLE
DÉFORMABLE TITIOUS ADH DÉFORMABLE AD ITIOUS AD E
HÉSI R
F CIMENTAI
Low Low
ANSI A118.4 and ANSI A118.11 ANSI A118.4 and ANSI A118.11 ANSI A118.4 and ANSI A118.11
Low
22
Polymer-Modified Mortars
ANSI A118.4 and ANSI A118.11 ANSI A118.4 ANSI A118.4 and ANSI A118.11
M
ON
I
ANSI A118.4 ANSI A118.4 and ANSI A118.11 ANSI A118.4 and ANSI A118.11
24
Lightweight Polymer-
Specialty Mortars
Modified Mortar
Full-Contact Mortars
Polymer-Modified Mortar
Lightweight
ANSI A118.4 and ANSI A118.11 ANSI A118.3
when mixed with Keraply.
Specialty Mortars
nonsag applications. This high-performance, compressive strength, which provides excellent tile, including moisture-sensitive tile, natural
polymer-modified mortar is formulated with impact strength in commercial facilities. stone and their agglomerates.
Easy Glide Technology™ for ease of application, Kerapoxy 410 is designed for setting most types
and with BioBlock® technology for mold and of tile and stone.
mildew resistance. MAPEI Ultralite Mortar’s
unique Ultralite Technology™ provides twice
the coverage of a standard thin-set mortar and
contributes to LEED points with over 20%
recycled content.
DS
ND
DS
M
F
IN CO
ARD
C2TE S1 R2T R2
O
O
CE AC EA
IV
RE
ME
HES TIO H AD CTION ES
NT
AD ITIOUS AD E DÉFORMABLE N RESIN AD HÉ RESIN ADH TIVE
SIF
HÉSI
F CIMENTAI
R À RÉSINE RÉAC
M O L D A N D M I L D E W R E S I S TA N C E
MP
ND
DS
F
ISO 13007 C1
ON
IN CO
ARD
C1 C1T
O
CE EM
E
ME IVE
IV
ES
C
NT HES EN
AD ITIOUS AD E
HÉSI R TITIOUS ADH
F CIMENTAI
26
Dry-Set Mortar
Latex Additives
Specialty Mortars
Dry-Set Mortars
ANSI A118.1 ANSI A118.1
Latex Additives
Dry-Set Mortar
thaw durability. To ensure proper flexibility,
always use a latex additive when using a dry-set
mortar for applications over plywood and for
setting nonvitreous, semivitreous, vitreous and
impervious tiles.
See the Kerabond/Keralastic System’s Technical
Data Sheet for the complete attributes of this
setting system.
AR ES IS
EN C N CO
EN C N CO
DS
DS
F
F
M
ON
I
C1 C1
O
CE CE
ME IVE ME IVE
NT HES NT HES
AD ITIOUS AD E AD ITIOUS AD E
HÉSI R HÉSI R
F CIMENTAI F CIMENTAI
CE WITH ISO ST
IAN AN
PL ITÉ AVEC LES
M M NO D
OR R
AR ES IS
EN C N CO
DS
F
M
ON
D1TE
O
ISO 13007
D IS
P I VE
AD ERSION ADHES N
HÉS O
IF EN DISPERSI
28
Epoxy Grouts
Mastics
ideal for tile installations in confined or restricted countertops, high-traffic areas, and areas needing
areas. stain and chemical resistance. Easy to maintain,
Kerapoxy CQ will clean to the original color and
contains BioBlock® technology to help protect
against mold and mildew.
AR ES IS
EN C N CO
AR ES IS
EN C N CO
MP
DS
DS
ND
F
DS
F
M
M
F
M
ON
ON
I
I
IN CO
ARD
D1TE D1TE R2 RG
O
O
O
AC RE
IV
D IS
RE
P I VE
D IS
P I VE TIO H ES A
CO CTION R SIN GRO E
UT
AD ERSION ADHES N AD ERSION ADHES N N RESIN AD ULI E V
HÉS
IF EN DISPERSI
O HÉS
IF EN DISPERSI
O SÀR CTI
ÉSINE RÉA
U.S./ 1040010 Pail: 1 U.S. qt. (946 mL) U.S. 90963000 Pail: 3.5 U.S. gals. (13,2 L) U.S./ * 1 U.S. qt. (946 mL)
Canada 1040011 Pail: 1 U.S. gal. (3,79 L) Canada * 1 U.S. gal. (3,79 L)
1040016 Pail: 3.5 U.S. gals. (13,2 L) Canada 90968000 Pail: 5 U.S. gals. (18,9 L) * 3.5 U.S. gals. (13,2 L)
90963000 Pail: 3.5 U.S. gals. (13,2 L)
* Refer to price list for product codes and colors.
M O L D A N D M I L D E W R E S I S TA N C E
AR ES IS
AR ES IS
EN C N CO
EN C N CO
EN C N CO
AR ES IS
EN C N CO
DS
DS
DS
DS
F
F
M
M
F
M
ON
ON
ON
I
I
RG R2 RG RG
O
O
O
RE EA RE RE
A UT IV A UT A UT
R
CO CTION R SIN GRO E AD CTION ES CO CTION R SIN GRO E CO CTION R SIN GRO E
ULI E V HÉ RESIN ADH TIVE ULI E V ULI E V
SÀR CTI SIF
À RÉSINE RÉAC SÀR CTI SÀR CTI
ÉSINE RÉA ÉSINE RÉA ÉSINE RÉA
M O L D A N D M I L D E W R E S I S TA N C E
30
Cement Grouts
Epoxy Grouts
Cement Grouts
ANSI A118.6 and ANSI A118.7 ANSI A118.6 ANSI A118.6
AR ES IS
EN C N CO
EN C N CO
NO D
CG2 CG2
M
DS
DS
F
M
M
OR
ON
ON
R
I
I
AR ES IS
EN C N CO
CG2
DS
F
WA WA
O
CE
ME
NT GRO
COU ITIOUS RE
UT
CE
ME
NT GRO
COU ITIOUS RE
UT
ME UT LIS CIMENTAI LIS CIMENTAI
NT GRO
COU ITIOUS RE
LIS CIMENTAI
* Refer to price list for product codes and colors. * Refer to price list for product codes and colors. * Refer to price list for product codes and colors.
M O L D A N D M I L D E W R E S I S TA N C E M O L D A N D M I L D E W R E S I S TA N C E M O L D A N D M I L D E W R E S I S TA N C E
M O L D A N D M I L D E W R E S I S TA N C E
32
Caulks Grout Colorant
Grout Additive
Premixed Products
Keracaulk™ S Mapesil ™ Grout Refresh™
Premium, Sanded Siliconized Acrylic 100%-Silicone Sealant Universal Grout Colorant and Sealer
Caulk Mapesil is a specially formulated, one-component, Grout Refresh is a ready-to-use, nonflammable,
Keracaulk S is a premium-grade, easy-to-use, 100%-silicone sealant for use on multiple water-based, polymer-modified colorant and
easy-to-clean, siliconized, sanded acrylic caulk substrates. Its neutral cure, low odor and excellent sealer for grout joints.
formulated to match all of MAPEI’s grout colors. weatherability make it ideal for interior and exterior
Product Código de Presentación applications on ceramic tile and stone.
Packaging
producto
Code
U.S./ * Cartridge: 10 U.S. oz. (296 mL)
Canada
Caulks
Keracaulk™ U
Premium, Unsanded Siliconized
Acrylic Caulk
Keracaulk U is a premium-grade, easy-to-use,
easy-to-clean, siliconized, unsanded acrylic
caulk formulated to match all of MAPEI’s grout
colors.
Product Código de Presentación Product Código de Presentación Product Código de Presentación
Packaging
producto Packaging
producto Packaging
producto
Code Code Code
Grout Colorant
U.S./ * Cartridge: 10 U.S. oz. (296 mL) U.S./ 4XX67* Tube: 10.1 U.S. oz. (299 mL) U.S./ * Bottle: 8 U.S. oz. (237 mL)
Canada Canada Canada
* Refer to price list for product codes and colors. * For the “XX” portion of the product code, use the * Refer to price list for product codes and colors.
two-digit number of the desired caulk color.
M O L D A N D M I L D E W R E S I S TA N C E M O L D A N D M I L D E W R E S I S TA N C E
Tile & Stone Basics and Hands-On Training 101, Basics: Surface-
Installation Training preparation products, thin-set
Systems One- or two-day class that covers mortars, adhesives and grouts.
(TSIS) products for surface preparation,
waterproofing, crack isolation,
tile and stone installation, and
grouting.
>
For registration information on U.S. seminars, please contact Sophia
D’Amico-Campbell at (954) 246-8555.
>
For registration information on Canadian seminars, please contact
Raffaelina Aceto at (450) 662-1212.
34
Tile & Stone Installation Systems UltraCare™ Stone, Tile & Grout Care Solutions
• Mud Bed and Repair Systems • Lightweight Polymer-Modified Mortar • Cleaners • Finishes
• Admixture • Specialty Mortars and Additives • Sealers • Problem-Solvers
• Patching Compounds, Skimcoats • Dry-Set Mortars
and Additives • Dry-Set Mortar Latex Additives
• Bond-Promoting Primers • Jobsite Mortar Additive
• Primers for Self-Leveling • Mastics
• Moisture Control • Epoxy Grouts
• Waterproofing Membranes • Cement Grouts
• Crack Isolation and Sound Reduction • Grout Additive
• Flexible Mortar System • Premixed Products
• Polymer-Modified Mortars • Caulks
• Full-Contact Mortars • Grout Colorant
Services in Mexico
0-1-800-MX-MAPEI (0-1-800-696-2734)
Technical Services
1-800-992-6273 (U.S. and Puerto Rico)
1-800-361-9309 (Canada)
Customer Service
1-800-42-MAPEI (1-800-426-2734)
Services in Mexico
0-1-800-MX-MAPEI (0-1-800-696-2734)
Copyright ©2012 by MAPEI Corporation (“MAPEI”) and all rights are reserved. MAPEI
does not guarantee or warrant the accuracy or completeness of this document. Nor does
MAPEI assume any responsibility arising from the reader’s reliance on the information in
this document. MAPEI denies all liability for damages of any kind arising from any errors,
omissions or inaccuracies in this document, or resulting from any reader’s reliance on
this document. Therefore, MAPEI disclaims all express and implied warranties, including,
but not limited to the implied warranties of MERCHANTABILITY and FITNESS FOR A
PARTICULAR PURPOSE. All intellectual property rights and other information contained
in this document are the exclusive property of MAPEI (or its parent or related companies),
unless otherwise noted. No part of this document may be reproduced or transmitted in any
form without the prior written consent of MAPEI.
36
PR6660_1212 MKT: 6095 Printed in the USA.