ROOM NAME. Tower: ______. Floor: __________.

Inspection #: ___________

ROOM NO: ____, _____, _____, _____. Space name.___________________. Date: _____________

Item Item Description Done Pending Expected Other

No. Completion
1. FCU installation with valve kit
2. Chilled water pipe with insulation
3. Condensate pipe with insulation
4. Chilled water pipe pressure test
5. Condensate pipe slope test
6. Supply and return duct with
insulation
7. FAD with insulation
8. Plenum boxes with flexible ducts
9. Supply and return grille as per ID
HVAC plans
10. VD in SAD, RAD & EAD
11. VAV in supply and return duct
12. Duct and pipe support
13. Toilet exhaust duct with fire damper
14. Duct sleeves crosses fire rated valve
with fire rated sealant
15. Filter access
16. Duct & pipe clashes
17. Smoke and make up air duct
18. MFSD
19. Cold and hot water pipe installation
20. Cold and hot water pipe pressure
test
21. Maintenance valves, thermal
balancing valves and WHA
22. Hot water pipe with insulation
23. Pipe supports
24. Vent pipe connection to plumbing
fixture
25. Vent pipe connection to riser
Plumbing
26. Pipe sleeves, Sealed with fire rated
sealant
27. Gravity test report for drainage
pipes
28. Drainage pipe installation at high
level if exist
29. Storm water pipe (slope and
supports) if exist
30. Dialysis chair water piping
31. Dialysis chair drainage piping
32. Sprinkler pipe drop in its original
location and numbers as per ID
33. Pipe supports properly installed
Fire Final paint on pipes done
34. Fighting Fire pipe clashes with other services
35. Fire Hose Cabinet
36. Zone Control valve

ROOM CHECKLIST – Mechanical Plumbing & FF

 37. Medical gas piping pressure test
38. Medical gas outlets, medical air,
Medical vacuum and oxygen
39. Gas Medical gas piping supports and
Piping connected with AVSU
40. Check pipe clashes with other
services

Consultant/ PMO Contractor

Name
Role

ROOM CHECKLIST – Mechanical Plumbing & FF