Professional Documents
Culture Documents
Carbon and Stainless Steel Pipes PDF
Carbon and Stainless Steel Pipes PDF
ThyssenKrupp
2
Consulting Material testing Quality assurance
· Transportation logistics · Preparation of specimens · Our quality management
· Use of materials · Non-destructive and guarantees uniform high
· Package solutions mechanical tests quality standards
· Third-party acceptance
testing
Application-oriented · Documentation
stock range
· Stainless steel pipes/tubes
and accessories Just-in-sequence delivery
· Carbon steel pipes/tubes · Coordination of materials
and accessories procurement
· Rolled steel products · Processing and transportation
logistics to specified delivery
cycles
Customized processing
· Processing services for
the entire product range
3
Our range of services
4
Quality
from start to finish
We demand top quality and And we apply these same high The right product for every In the following, we present the
outstanding service from our- quality standards to our own requirement individual product groups with
selves and our suppliers with operations. To ensure that every seamless the applicable standards and
the aim of keeping our custo- or welded steel pipe/tube indicate the materials allocated
mers satisfied in every respect. Continuous quality control from meets the requirements placed to each type of pipe/tube.
When selecting our suppliers, incoming goods to storage to on it, selecting the right materi-
we take particular care to en- outgoing goods is a matter of al quality for the job is essential.
sure that they are flexible and course. Our established quality
dependable. assurance procedures guaran- Each material has its own spe-
tee our customers the depend- cific properties that make it
Key to partnering us is the abi- ability they have come to particularly suitable for its
lity to meet the most exacting expect from us. intended use.
quality requirements.
Our EN ISO 9001 quality The various materials have
But even after we have made management system has been been classified in groups in line
our selection, we constantly certified by an internationally with their general application
check on the efficiency and accredited inspection company areas.
quality of our suppliers. and is subjected to regular
internal and external audits.
5
Our special service
Cutting options
6
Material testing/Inspection certificates
7
Pipes for the transportation
of liquids and gases
The framework conditions for standardi- However, repairs and maintenance for
zation and technical regulations are cur- existing equipment are still carried out
rently changing significantly for fabrica- in accordance with the previous TRR,
tors of pipes and accessories. The TRB and TRD regulations, meaning that
European Pressure Equipment Directive European and German standards will
(PED) has replaced the previous exist in parallel and have to be ob-
Pressure Vessel Code and new EN stan- served for some time to come. For this
dards have replaced the previous DIN reason, you will receive pipes certified
standards. In addition, previous techni- to both the previous DIN and new EN
cal regulations such as the Technical standards in the future.
Rules for Pressure Vessels – Pipes
(TRR), Technical Rules for Pressure
Vessels (TRB) and the Technical Rules
for Pressure Vessels – Steam Boilers
(TRD) are now invalid for new installa-
tions. They have been replaced by the
standardized EU-wide technical regula-
tions EN 13480 – “Metallic Industrial
Piping”, EN 13445 – “Unfired Pressure
Vessels” and EN 12952 “Water-tube
boilers and auxiliary installations” and
12953 “Shell Boilers”.
8
Pipeline construction
at ambient temperatures
Seamless, standard wall pipes Welded steel pipes Elbows in accordance with Seamless elbows in accor-
in accordance with EN 10216-1/ in accordance with EN 10217-1/ EN 10253-1 dance with ASTM A 234
DIN 1629. Can be used with- EN 10219/DIN 1626. For pres- z seamless
Dimensions
out restrictions under the PED sure pipes outside the remit of
Steel grade · up to 24”, grade WPB, short
up to the temperature limits in the PED
· S235 and long radius in STD
the related regulations
Steel grade and XS
(German Technical and Dimensions
· P235TR1/S235JRH/St 37.0
Scientific Association for Gas · 21.3 – 406.4 mm OD
Tees in accordance with DIN
and Water (DVGW) 60°C, Dimensions · standard wall
2615, Part 1
AD2000-W4, 02/05 edition, in accordance with EN 10220
Finish
300°C) (DIN 2448) z seamless
· 3S in 45°, 90°, 180°
· 10.2 – 2,220 mm OD
Steel grade
· 1.6 – 10 mm standard wall Elbows in accordance with Steel grade
· P235TR2/St 37.0
· 1.4 – 10 mm thin wall DIN 2605-1, · St 35.8 l
Dimensions · 1.8 – 40 mm heavy wall
z seamless Dimensions
in accordance with EN 10220
Inspection certificate · up to 508 mm OD, standard
(DIN 2448) Steel grade
· APZ 3.1 in accordance with and heavy walls, equal and
· 10.2 – 711 mm OD, up to · St 35.8I
EN 10204 (formerly APZ reduced
1,450 mm by arrangement
3.1.B); Dimensions
· 1.6 – 14.2 mm wall Reducers in accordance with
German mark of conformity · 21.3 – 610 mm OD
DIN 2616
Inspection certificate (CE mark of conformity in the · standard and heavy wall
· APZ 3.1 (formerly APZ 3.1.B) future) z seamless
Finish
and AD2000-W4; German
· 2S, 3S and 5S in 45°, 90°, 180° Steel grade
mark of conformity Elbows, welded fittings, fittings
· St 35.8 l
(CE mark of conformity in the in accordance with DIN stan- z welded
future) dards, all combined under EN Dimensions
Steel grade
10253 in the future; elbows · up to 508 mm OD,
· St 37.0 w
also in accordance with ASTM concentric and eccentric
Dimensions
· 219.1 – 813 mm, series 2
(welded, standard wall series) 9
Torispherical heads in accor- Flanges Threaded flanges Lapped flanges and rings
dance with DIN 28011 Steel flanges in accordance DIN 2565/DIN 2566, nominal for welding
with DIN standards, all com- pressure range of 6 – 16 bar DIN 2673, nominal pressure of
Steel grades
bined under EN 1092-1 in the 10 bar
· S235JR (RSt 37-2) Steel grade
future. Steel grade S235 with
· P265GH-TC1 (Hll) · St 37-2, black and galva- Steel grade
test report EN 10204-2.2, steel
nized, nominal diameter · St 37-2 for pipe diameters of
Dimensions grade P250GH with mill inspec-
15 – 150 (1/2” – 6”) 21.3 – 406.4 mm
· dished heads with a low tion certificate EN 10204-3.1
cylindrical straight flange up (formerly 3.1.B).
Plain welding flanges
to 610 mm OD
DIN 2573 and DIN 2576, nomi-
Welding neck flanges
nal pressure ranges 6 and
Caps in accordance with DIN 2631 – DIN 2638 in a
10 bar
DIN 2617 nominal pressure range of
6 – 160 bar
Steel grades Steel grade
· St 35.8 l Steel grades · St 37-2 for pipe diameters of
· P265GH-TC1 (HII) · RSt 37-2 and C22.8 21.3 – 406.4 mm
for pipe diameters of
Dimensions
17.2 – 1,016 mm Lapped flanges with
· up to 406.4 mm OD
stub ends/collars
Blind flanges DIN 2642, nominal pressure of
Saddles – DIN 2618,
DIN 2527 in a nominal pres- 10 bar
weld-in-bends – DIN 2619
sure range of 6 – 40 bar
Steel grade
Steel grade
Steel grades · St 37-2 for pipe diameters of
· St 35.8 l
· RSt 37-2 and C22.8, 21.3 – 406.4 mm
Dimensions nominal diameter 15 – 600
· up to 406.4 mm OD
10
Steel pipes
for aqueous liquids
11
Steel line pipes and large-diameter pipes
for oil and gas
Welded steel line pipes for TS-petrol gas station tubes Seamless steel line pipes in
low-pressure applications DIN 2442 longitudinally welded accordance with API 5L
up to an operating pressure of threaded pipes and DIN All-purpose line pipes and boi-
16 bar in accordance with 1626/2458 longitudinally ler pipes/tubes in accordance
EN 10208-1 (DIN 2470-1/ welded steel pipes with a welding with API 5L and ASTM A 106
1626) factor of 1.0 for sub-surface
Steel grades
House connection pipes with gasoline and diesel pipe
· Grades B and C
plain ends 1” – 2 1/2” with V- systems
seam welding bevel in accor- Dimensions
Steel grade
dance with DIN 2559-1 · 1/2” – 24” OD
· St 37.0
· Sch 10 – Sch 160 wall
Steel grade
Dimensions above 2” with beveled ends
· L235GA (St 37.0)
· 1” – 5” (33.7 – 133 mm OD) in normal and double
Dimensions · 3.6 – 5.4 mm wall manufactured lengths
· 33.7 – 508 mm OD · 6,000 mm length, –0/+50 mm
Inspection certificate
· 3.6 – 6.3 mm wall
Finish · APZ 3.1 in accordance with
Inspection certificate · PE-coated in accordance with EN 10204
· APZ 3.1 in accordance with DIN 30670 (formerly APZ 3.1.B)
EN 10204
(formerly APZ 3.1.B)
Finish
· Yellow PE-coating
in accordance with DIN 30670
12
Seamless and welded steel Seamless steel line pipes HF-welded steel line pipes Longitudinal or spiral weld
line pipes and large-diameter large-diameter pipes
Steel grades
pipes for high-pressure z of normalized strip with no of thermomechanically
· L245NB to L485QB
applications; steel pipes for subsequent weld seam rolled strip
(StE 240.7 to StE 480.7)
oil and gas transportation annealing
· suitable for acid gas Steel grades
pipelines with permitted oper-
L245NCS to L450QCS Steel grades · L290MB to L555MB
ating pressures above 16 bar
· also as API grades, grade B · L245NB to L415NB (StE 290.7TM)
· in land-based pipelines
up to X70 (StE 240.7 to StE 415.7) · also suitable for acid gas
for pure, dry natural gas in
L290MCS to L485MCS
accordance with EN 10208- Dimensions Dimensions
· and as API grades, grade B
2 (formerly DIN 17172 and · up to 508 mm OD · up to 20” (508 mm OD)
up to X80 with and without
DIN 2470-2) · up to 17.5 mm wall
acid gas specification
· and for undersea pipelines z as well as of thermomechani-
with acid gas specification cally rolled strip Dimensions
· up to 64” (1,620 mm OD)
Steel grades
· 40 mm wall
· L245MB to L485MB
(StE 240.7TM to StE 480.7TM) Inspection certificate
· also suitable for acid gas · APZ 3.1 to EN 10204
L290MCS to L485MCS (formerly APZ 3.1.B)
· and as API grades, grade B
Finishes
up to X70 with and without
· with PE coating in accordance
acid gas specification
with DIN 30670
· also black on request
13
High-temperature resistant pipes
for boiler construction and chemical processing equipment
Seamless boiler pipes/tubes · alloyed: German Technical Seamless boiler pipes/tubes Seamless cold manufactured
of high-temperature unalloyed Inspection Agency (TÜV) APZ in accordance with ASTM heat exchanger pipes
steels with and without ultra- 3.2 in accordance with EN for boiler, chemical processing
z unalloyed in accordance with
sound testing and high-temper- 10204 (formerly 3.1.A-TÜV) equipment and plant construc-
ASTM A 106/ASME SA 106
ature alloyed steels with ultra- tion in accordance with
sound testing in accordance Seamless pipes of unalloyed Steel grades EN 10216-2/EN 10305-1 or
with EN 10216-2/DIN 17175. low-temperature steels · Grades B and C DIN 17175/DIN 2391C
Can be used without restric- for chemical plants and proces-
z alloyed in accordance with Steel grades
tions in accordance with the sing equipment in accordance
ASTM A 335/ASME SA 335 · P235GH-TC1+N
new PED and the old Pressure with EN 10216-4/DIN 17173,
(excl. US testing) (St 35.8 I NBK)
Vessel Code through certifica- test category 1, excl. US testing
tion in accordance with EN and Test scope
Steel grades Steel grades
DIN. · EN 10216-2
· P215NL (TT St 35 N) · P5 (X11CrMo5)
· DIN 17175
Steel grades · P255QL (TT St 35 V) · P11 (13CrMo4-5)
· AD2000-W4
· P235GH-TC1 (St 35.8 l) · P22 (10CrMo9-10)
Dimensions
· P235GH-TC2 (St 35.8 III) · P91 (X10CrMoVNb9-1) Dimensions
· 21.3 – 508 mm OD
· P265GH-TC2 (St 45.8 III) usually with hydrostatic test in · 10 – 38 mm OD
· 2.0 – 16 mm wall
· 16Mo3 (15 Mo 3) accordance with ASTM A 530 · 1.0 – 3.0 mm wall
· 13CrMo4-5 (13 CrMo 4 4) Inspection certificate · 6,000 mm length
Dimensions
· 10CrMo9-10 · APZ 3.1 in accordance with
· 1/2”–24” OD Inspection certificate
· X10CrMoVNb9-1 EN 10204
· Sch 10 – Sch 160 wall · APZ 3.1 in accordance with
(formerly APZ 3.1.B)
Dimensions above 2” with beveled ends EN 10204
· 10.2 – 610 mm OD Finish in normal and double (formerly APZ 3.1.B)
· 1.6 – 50 mm wall · alloyed low-temperature manufactured lengths
On request
grades manufactured to order
Inspection certificate Inspection certificate · other high-temperature materials
· unalloyed: APZ 3.1 in accor- · APZ 3.1 in accordance with · long random lengths
dance with EN 10204 EN 10204 (up to 22 m)
(formerly APZ 3.1.B) (formerly APZ 3.1.B) · cut lengths
14
Tubing for hydraulic and pneumatic pressure lines
for pulsating stresses
Finishes
· bonderized
· yellow
· white chromated
Manufactured to order
· green chromated
· E355+N (St 52.4 NBK)
15
Stainless steel pipes
16
Stainless steel pipes and accessories
for pressure pipes
17
ANSI seamless stainless Seamless instrument pipes ANSI seamless heat-resistant
steel pipes in inch dimensions stainless steel pipes
for use with corrosive media in in accordance with for use with corrosive media
accordance with the ANSI stan- ASTM A 269 and at high temperatures in
dard with multiple inspection to accordance with ASTM A 312,
Steel grades
international standards. ASME SA 312, SEW 470
· TP304/304L
· ASTM A 312/ASME SA 312 · TP316/316L Steel grade
· EN 10216-5, TC-1 as an · TP310S
Dimensions
installation pipe with AD2000-
· 6.35 – 25.4 mm OD Dimensions
W2 (DIN 17458, PK1)
· ANSI: · 1/4” – 6” OD
· NF A 49117, NACE MR 0175
1/4” 22BWG/SWG – · Sch 40s–Sch 80s wall
Steel grades 1” 14BWG/SWG
Inspection certificate
· TP304/304L/304H
Inspection certificate · APZ 3.1 in accordance with
· TP316/316L
· APZ 3.1 in accordance with EN 10204
· TP316Ti
EN 10204 (formerly APZ 3.1.B)
· TP321/321H
(formerly APZ 3.1.B)
· TP347H
· UNS S 31803 (Duplex)
· UNS N O8904 (TP904L)
Dimensions
· 3/8” Sch 10s–16” Sch 160s
(17.15 x 1.65 mm –
406.4 x 40.49 mm)
18
Welded stainless steel pipes z for the paper and cellulose z ANSI
z for use in corrosive media in industry, longitudinally welded for use in corrosive media,
accordance with EN 10217-7, in accordance with DIN longitudinally welded
TC-1 or TC-2 with AD2000- 17455/17457 in accordance with ASTM A
W2 (DIN 17457 PK1/PK2) 312
Steel grades
Steel grades · 1.4301 Steel grades
· 1.4301 · 1.4306/1.4307 · TP304/304L
· 1.4307 · 1.4541 (1.4301/1.4307)
· 1.4401 · 1.4571 · TP316/316L
· 1.4404 (1.4401/1.4404)
Dimensions
· 1.4462
· 23 – 508 mm OD Dimensions
· 1.4541
· 1.5 – 4.0 mm wall · 3/8” – 16” OD
· 1.4571
· Sch 5 – Sch 40 wall
Inspection certificate
Dimensions
· APZ 3.1 in accordance with
· 4.0 – 609.6 mm OD
EN 10204
· 1.0 – 16 mm wall
(formerly APZ 3.1.B)
Inspection certificate
· APZ 3.1 in accordance with
EN 10204
(formerly APZ 3.1.B)
Finishes
· to nominal diameter 100
annealed
· above nominal diameter 100
unannealed
19
Elbows, welded fittings and z welded for the paper and z equal tee, welded, annealed Reducers
fittings of austenitic materi- cellulose industry with and pickled in accordance with DIN 2616
als in accordance with DIN shortened radius
Steel grades
standards, in the future in z concentric and eccentric,
Steel grades 1.4541; 1.4571
accordance with EN 10253-3 seamless, annealed and
· 1.4541; 1.4571
and -4. Dimensions pickled
3S 90°, dimensions · 21.5 – 323.9 mm OD
Steel grades
Elbows in accordance with · 18.0 – 206 mm OD · Wall thickness range 1 and
· 1.4541; 1.4571
DIN 2605 · 1.5 – 3.0 mm wall 2 of DIN 2615
z seamless, 3S 90° Dimensions
Tees z equal tee, welded, similar to · to 219.1 mm OD
Steel grades
z equal, seamless, annealed DIN 2615 for the paper and
· 1.4541; 1.4571
and pickled cellulose industry z concentric, welded
Dimensions
Steel grades Steel grades Steel grades
· 15.0 – 168.3 mm OD
· 1.4541; 1.4571 · 1.4541; 1.4571 · 1.4541; 1.4571
· 1.5 – 4.5 mm wall
Dimensions Dimensions Dimensions
z welded, 3S 90° · 21.3 – 168.3 mm OD · 18 – 254 mm OD · 33.7 – 323.9 mm OD
· Wall thickness range 1–3 · 1.5 and 2.0 mm wall
Steel grades
z concentric, welded
· 1.4541; 1.4571 z reduced, seamless similar to DIN 2616 for the
3S 90°, dimensions Steel grades paper and cellulose industry
· 15.0 – 609.6 mm OD · 1.4541; 1.4571 L=(D1–D2)x3
· 1.5 – 10.0 mm wall
Dimensions Steel grades
5S 90°, dimensions · 33.7 – 114.3 mm OD · 1.4541; 1.4571
· 21.3 x 2.0 mm – 168.3 x 2.6 mm Wall thickness range 1 and 2 Dimensions
· 254 – 508 mm OD, · 35–254 mm OD
2.0 – 4.0 mm wall,
R = D + 100 mm 90°
20
Saddles Elbows, welded fittings and Reducers Tees
in accordance with DIN 2618 fittings in accordance with z concentric, seamless z equal, seamless
extruded from pipe ASTM A 403
Steel grades Steel grades
Steel grade Elbows · WP304/304L; WP316/316L · WP304/304L; WP316/316L
· 1.4571 z seamless, 90° and 45° WP321H WP321H
long radius
Dimensions Dimensions Dimensions
· 21.3 – 323.9 mm OD Steel grades · 3/4” – 12” OD · 1/2” – 12” OD
· 2.0 – 3.0 mm wall · WP304/304L; WP316/316L; · Sch 10 – Sch 160 wall · Sch 10 – Sch 160 wall
WP321H
z reduced, seamless
Torispherical heads z concentric, welded
Dimensions
in accordance with DIN 28011 Steel grades
· 1/4”–16” OD Steel grades
annealed and pickled · WP304/304L; WP316/316L
· Sch 5 – Sch 160 wall · WP304/304L; WP316/316L
WP321H
Steel grade
z welded, 90° and 45° Dimensions
· 1.4571 Dimensions
long radius · 1/2” – 16” OD
· 3/4” – 8” OD
Dimensions · Sch 10 wall
Steel grades · Sch 10 – Sch 80 wall
· 21.3 – 609.6 mm
· WP304/304L; WP316/316L
· 2.0 – 4.0 mm wall z eccentric, seamless
z equal, welded
Dimensions
Steel grades
· 1/2” – 16” OD Steel grades
· WP304/304L; WP316/316L
· Sch 5 – Sch 40 wall · WP304/304L; WP316/316L
WP321H
Dimensions
Caps Dimensions
· 1/2” – 16” OD
Steel grade · 1 1/2” – 6” OD
· Sch 10 wall
· WP316/316L · Sch 10 – Sch 80 wall
Dimensions
· 1” – 6” OD
· Sch 10 – Sch 80 wall
21
Flanges of austenitic materials Blind flanges Plain flanges
in accordance with DIN stan- z DIN 2527, shape B, z DIN 2576, PN 10
dards, in future all steel flange PN 10, PN 16 and PN 40
Steel grades
types standardized under EN
Steel grades · 1.4541
1092-1
· 1.4541 · 1.4571
· 1.4571
Welding neck flanges Dimensions
DIN 2632 (PN 10), DIN 2633 Dimensions · nominal diameter 15 –
(PN 16), DIN 2635 (PN 40), · nominal diameter 15 – nominal diameter 500
Raised face shape C nominal diameter 300
Inspection certificate
Steel grades Inspection certificate · APZ 3.1 in accordance with
· 1.4541 · APZ 3.1 in accordance with EN 10204 (formerly APZ
· 1.4571 EN 10204 (formerly APZ 3.1.B) 3.1.B) with AD2000-W2,
W9 and W10
Dimensions
z similar to DIN 2327, shape B,
· nominal diameter 10 – z similar to DIN 2576, drilled,
drilled PN 10, reduced thickness
nominal diameter 500 PN 10, reduced thickness
Steel grades
Inspection certificate Steel grades
· 1.4541
· APZ 3.1 in accordance with · 1.4541
· 1.4571
EN 10204 · 1.4571
(formerly APZ 3.1.B) with Dimensions
Dimensions
confirmation AD2000-W2, · nominal diameter 20 –
· nominal diameter 20 –
W9 and W10 nominal diameter 600
nominal diameter 600
Inspection certificate
Inspection certificate
· APZ 3.1 in accordance with
· APZ 3.1 in accordance with
EN 10204
EN 10204 (formerly APZ
(formerly APZ 3.1.B) with
3.1.B) with AD2000-W9
AD2000-W9
22
Slip-on flanges and welding z Slip-on flanges similar to nominal diameter 500
neck collars, in accordance DIN 2642, drilled PN 10, Flanges in accordance with Blind flanges
with DIN 2673, PN 10 reduced thickness ASTM A 182 (RF round flange)
z 150 lbs
Steel grade Steel grades
Welding neck flanges Steel grades
· 1.4571 · 1.4541
· F304L; F316L
· 1.4571 z 150 lbs
Dimensions
Dimensions Dimensions
· nominal diameter 15 – Steel grades
· nominal diameter 20 – · 1/2” – 12”
nominal diameter 300 · F304L; F316L
nominal diameter 600
Inspection certificate Dimensions z 300 lbs
· APZ 3.1 in accordance with Inspection certificate · 1/2” – 16”
· APZ 3.1 in accordance with Steel grades
EN 10204 (formerly APZ · Sch 10 and Sch 40
EN 10204 (formerly APZ · F304L; F316L
3.1.B) with AD2000-W2, W9
3.1.B) with AD2000-W9 z 300 lbs
and W10 Dimensions
z Slip-on flanges of lightweight Steel grades · 1/2” – 8”
Slip-on flanges and metal G Al Si 12 (CU), bright · F304L; F316L
lapped flanges in accordance and coated similar to DIN
Dimensions
with DIN 2642, PN 10 2642, PN 10
· 1/2” – 8”
Steel grades Dimensions · Sch 10 and Sch 40
· 1.4541 · nominal diameter 15 –
· 1.4571 nominal diameter 600 Slip-on flanges
Dimensions z of lightweight metal G Al Si 12 Steel grades
· nominal diameter 15 – (CU), bright and coated finish · F304L; F316L; F321H
nominal diameter 500 for the paper and cellulose
industry, similar to DIN 2642, Dimensions
Inspection certificate PN 10 · 1/2” – 8”
· APZ 3.1 in accordance with
EN 10204 (formerly APZ 3.1.B) Dimensions
· nominal diameter 15 –
23
Mapress
24
Mapress pressfitting system
25
Technical information
26
DIN and EN standards Conversion
of Standards
27