Professional Documents
Culture Documents
04K in
04K in
Instructions
Part No. R
147741-04K
EQ
D
UIRE
OE
Pressure Washer
• Pressure Regulator Valve Reguator
• Outer Boost Valve Valve Outer
Boost
• Inner Boost Valve Valve
Inner
• Boost Sleeve OE PR Boost
Spring Valve
Boost
Sleeve
Tool Kit Tool Kit
Part No.
F-147741-TL4 Boost Valve
Assembly
• Reamer
• Reamer Jig
NOTE: Before disassembly, note position of d. Install Sonnax boost valve assembly.
• Guide Pin retainer on OE sleeve. Retainer must be returned
to the corresponding step on Sonnax sleeve e. Reinstall OE retainer. Ensure retainer is
NOTES: Sonnax “F-Tool” kits designed to during installation. set into the corresponding step on Sonnax
service a specific bore require the VB-FIX, sleeve that was noted before disassembly.
a self-aligning valve body reaming fixture.
More information and instructions can be
1. Disassembly
a. Remove OE retainer after noting its 4. Final Testing
found online at www.sonnax.com.
position on OE boost sleeve. Set retainer Vacuum testing at the ports indicated holds
aside for reuse. the recommended minimum 16 and 18 in-Hg.
b. Remove and discard OE boost assembly.
c. Remove OE spring and washer, set aside A750E Lower
for reuse. Valve Body
2. Bore Reaming
25 5
30 0
VACUUM