Graded Exercises on Reading and interpreting Engineering Drawings 187
6-8@RIVET
M16 LONG
Fig. 9.1 Isometric view of a pole of a d.c. machine
Answer
Complete Orthographic Projections are drawn and dimensioned properly as in
Fig. 9.2.
9.3.2 A cable socket
Fig. 9.3 shows sectional elevation and plan (in part) of a cable socket. Draw an
ordinary elevation showing all hidden positions in dotted lines and indicate the
dimensions also. Mention the drill angle ‘a’. Indicate the mistake at ‘b’.
Answer
() Anordinary elevation showing all hidden detauls in dotted lines is given
as in Fig. 9.4,
(ii) All the dimensions have been indicated.
iii) Drill angle is 118"
(iv) The mistake at b is that no arrow head should be at the centre.
9.3.3 An overhead line insulator
Fig. 9.5 shows an overhead line insulator in half section. Draw the full section
of the insulator.
Answer
‘The full sectional view of the insulator has been drawn as in Fig. 9.6.Graded Exercises on Reading and Interpreting Engineering Drawings 195.
b—er—-|
HALF SECTIONAL
SIDE VIEW
HALF SECTIONAL ELEVATION
(b) ORTHOGRAPHIC PROJECTIONS
Fig. 9.13 (a) Half sectional isomeric view of a kit-kat fuse, (b) orthographic projections196 Electrical Engineering Drawing
Las WAL
woe VE HALF SECTIONAL ELEVATION
Fig. 9.14 Orthographic projections ot one part uf a kit-kat fuse
Fig. 9.15 Isometric view o1 a field magnet frame