Professional Documents
Culture Documents
Aeroflex IFR Marconi 6413A Datasheet
Aeroflex IFR Marconi 6413A Datasheet
Aeroflex IFR Marconi 6413A Datasheet
Test Equipment Solutions Ltd specialise in the second user sale, rental and distribution of
quality test & measurement (T&M) equipment. We stock all major equipment types such as
spectrum analyzers, signal generators, oscilloscopes, power meters, logic analysers etc from
all the major suppliers such as Agilent, Tektronix, Anritsu and Rohde & Schwarz.
We are focused at the professional end of the marketplace, primarily working with customers
for whom high performance, quality and service are key, whilst realising the cost savings that
second user equipment offers. As such, we fully test & refurbish equipment in our in-house,
traceable Lab. Items are supplied with manuals, accessories and typically a full no-quibble 2
year warranty. Our staff have extensive backgrounds in T&M, totalling over 150 years of
combined experience, which enables us to deliver industry-leading service and support. We
endeavour to be customer focused in every way right down to the detail, such as offering free
delivery on sales, covering the cost of warranty returns BOTH ways (plus supplying a loan
unit, if available) and supplying a free business tool with every order.
As well as the headline benefit of cost saving, second user offers shorter lead times, higher
reliability and multivendor solutions. Rental, of course, is ideal for shorter term needs and
offers fast delivery, flexibility, try-before-you-buy, zero capital expenditure, lower risk and off
balance sheet accounting. Both second user and rental improve the key business measure of
Return On Capital Employed.
We are based near Heathrow Airport in the UK from where we supply test equipment
worldwide. Our facility incorporates Sales, Support, Admin, Logistics and our own in-house
Lab.
- No-quibble parts & labour warranty (we provide transport for UK mainland addresses).
- Free loan equipment during warranty repair, if available.
- Full electrical, mechanical and safety refurbishment in our in-house Lab.
- Certificate of Conformance (calibration available on request).
- Manuals and accessories required for normal operation.
- Free insured delivery to your UK mainland address (sales).
- Support from our team of seasoned Test & Measurement engineers.
- ISO9001 quality assurance.
Email: info@TestEquipmentHQ.com
Web: www.TestEquipmentHQ.com
Cellular Parametric Test
6413A Base Station Test System
• Comprehensive and independent 3GPP The Racal Instruments Wireless Solutions 6413A is designed
FDD Node B test tool for field use specifically for network operators. A single-box portable solution, it
• Designed for installation and is able to take complete control of the Node B via the Iub interface
commissioning, maintenance, fault- and perform all of the critical transmitter, receiver and functional
finding, performance verification and new tests without external control equipment or need for detailed
feature testing knowledge of the Node B operation and control.
• Reduces number of times installation The 6413A MMI is intuitive to use. Based around an embedded PC
team needs to revisit a cell site and using touch-screen controls, all functions can be operated from
• Tests entire receive and transmit paths the front panel. Measurement results can be viewed while tests are
from RF to Iub running or stored for later analysis. Tests can be run manually or
automatically using pre-programmed test sequences.
• Manufacturer-specific Iub control enables
complete measurement capability Measurements are performed in line with the recommendations of
• Enables network operators to maintain 3GPP TS25.141.
Quality of Service obligations
• Full support packages to keep up to date
with Node B enhancements
Occupied Bandwidth
This is a useful measurement to ensure that the Node B does not
occupy an excessive bandwidth and therefore cause interference with
other users of the adjacent spectrum or cause the network operator
to breach its licence conditions.
RECEIVER TESTS
Reference Sensitivity Level
The reference sensitivity test provides a single uplink channel at
minimum power to the Node B's receiver, simulating a mobile at the
edge of the cell under ideal propagation conditions. If the Node B can
decode the signal and meet the BER requirement, its small signal Recording an Automated Sequence
performance is good.
The automated sequences allow an operator to record a
The 6413A signal generator operates down to -125dBm enabling measurement sequence which can then be replayed as many times as
engineers to make reference sensitivity level measurements that desired to ensure that measurements are carried out in a consistent
match conditions experienced in the field. and repeatable manner. For more complex test requirements, the
Absolute Sensitivity Level sequences can also be edited manually.
Reference sensitivity level is useful for determining whether a Node LOGGING AND VIEWING RESULTS
B meets the required 3GPP specification of -121dBm. However, some Measurement results are displayed and continuously updated while
Node Bs will perform better than the minimum specification and an any given measurement is being performed. At the same time, all
operator can take advantage of this to increase Quality of Service or measurement result data is stored in a database so that it can be
network efficiency. analyzed at a later date or used for comparing current against
The 6413A can indicate absolute sensitivity levels down to -130dBm historical performance.
allowing an operator to take advantage of Node Bs that perform For current measurements, where there are pass/fail limits defined in
considerably better than the 3GPP specifications mandate. TS25.141, these are shown on the display to give an instant indication
Dynamic Range of whether the Node B is within specification or not.
The dynamic range test simulates the scenario where many mobiles
are active, by setting up an uplink channel for a single mobile (the
wanted signal), along with superimposed Additive White Gaussian
Noise (AWGN) to represent the interference from all the other
mobiles. The unwanted noise is much greater in overall power then
the wanted signal, so the test measures the Node B receiver's ability
to extract the wanted signal from the interference with a higher
overall power at the Node B's receiver.
RF SIGNAL SOURCE
Frequency Range
800 to 960 MHz
1.71 to 2.20 GHz
Resolution
<1 mHz
Output Power
-130 to -55 dBm
Resolution
0.25 dB
0 to +46 dBm -6 to +6 dB
±2.5% RMS
Active Channels
Test Model 4 (-3dB no CPICH)
NODE B RECEIVER TESTS DIMENSIONS, ENVIRONMENTAL AND SAFETY
E1 interface 1 year
6413-FDD 3GPP FDD mode R99 W6413A/203C Extended standard warranty 36 months with 2
scheduled calibrations
6413-R5 3GPP FDD mode R99 and R5
W6413A/205C Extended standard warranty 60 months with 4
Iub INTERFACES
scheduled calibrations
At least one should be specified
Silver and Gold service contracts are also available in some countries
6413-E1T1 E1/T1/J1 Iub protocol module and provide enhanced levels of support including loan units during
6413-STM1 STM-1 optical Iub protocol module repair. For further information, please contact Aeroflex.
At least one should be specified. A software support option must also Provides support for first cellular standard software and first Iub
be ordered for each control software option. Please specify the Node control software.
B Manufacturer’s software version used on the network at time of 6413-S1 One year Software Support
order.
6413-S2 Two year Software Support
6413-ERIC Ericsson software
6413-S3 Three year Software Support
6413-NOK Nokia software
If more than one cellular standard or manufacturer's software option
6413-NORT Nortel software is fitted then a second 'S' charge is payable on each subsequent
6413-SIE Siemens software option. E.g. A unit with 2 cellular and 2 Iub options would require one
6413-S1 and two 6413-SS1 for one year software support
ACCESSORIES
6413-SS1 One year Second Software Support
6413-Opt61 Environmental protection case
6413-SS2 Two year Second Software Support
6413-Opt62 Rigid transit case
6413-SS3 Three year Second Software Support
6413-Opt64 Front panel protection cover