Professional Documents
Culture Documents
Super T Girder
Super T Girder
Super T Girder
Girder
STANDARD DESIGN OF SUPER-T
2
Review of
Design Report
Super T-Girder
3
DESIGN PARAMETER USED
DESIGN REPORT SUPER-T VS. APB STANDARD PRODUCT
Design Design Report Super-T Adhi-Beton Standard Product
Parameter
Limit Concrete AASHTO LRFD SNI 2847:2013, SNI 7833:2012
Stresses
Load & Load 22TCN – 272 – 05 (Vietnamese SNI 1725:2016 (Indonesian National
Combinations Standard) Standard)
AASHTO LRFD
Loss of Prestress AASHTO LRFD AASHTO LRFD, Standard of Public Works
Ministry for Roads & Bridges (Bina
Marga/2011)
Reinforcement Longitudinal & Shear : Longitudinal & Shear : SNI 2847:2013
refers to ACI 318
Cambers & Immediate deflections PCI Rational Methods for long-term
Deflections deflections
Moment & Shear AASHTO LRFD ACI 318, SNI 2847:2013
Capacity
4
DESIGN PARAMETER USED
LIMIT CONCRETE STRESSES
At Service At Service
Compression, due to permanent , Compression, due to permanent,
prestress and transient loads : prestress and transient loads:
0.6fc’ 0.6fc’
Compression, due to permanent Compression, due to permanent
and prestress loads: 0.45fc’ and prestress loads : 0.45fc’
Strength: Service IV
1.25 DL + 1.5 ADL + 1.75LL 1.0 DL + 1.0 ADL
Strength I:
1.0 DL + 2.0 ADL + 1.8 LL
Strength II:
1.0 DL + 2.0 ADL + 1.4 LL 6
DESIGN PARAMETER USED
INDONESIAN STANDARD (SNI 1725:2016)
7
Review of
Product Design
Super T-Girder
8
Web and Flange
10