Professional Documents
Culture Documents
RF & Microwave Cable Assemblies - 10M
RF & Microwave Cable Assemblies - 10M
au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
RF & MICROWAVE
CABLE ASSEMBLY CATALOGUE
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
CABLE GUIDE - CABLES VS INSERTION LOSS…....................................................................................3
RG58 CABLE ASSEMBLIES.…………………...................................................................................................5
RG59 CABLE ASSEMBLIES.…………………...................................................................................................9
RG316 CABLE ASSEMBLIES.…………………...............................................................................................11
RG142 CABLE ASSEMBLIES.…………………...............................................................................................14
RG400 CABLE ASSEMBLIES.…………………...............................................................................................17
RG223 CABLE ASSEMBLIES.………………..................................................................................................20
RG213 CABLE ASSEMBLIES.………………...................................................................................................23
RG214 CABLE ASSEMBLIES.………………...................................................................................................25
LMR195 ASSEMBLIES.……………...................................................................................................................27
LMR200 ASSEMBLIES.……………...................................................................................................................30
LMR240 ASSEMBLIES.……………...................................................................................................................33
LMR240-75 ASSEMBLIES.……………............................................................................................................36
LMR400 ASSEMBLIES.……………...................................................................................................................38
HAND FORMABLE CABLE ASSEMBLIES UP TO 18GHz
(HABIA 0.086” FLEXIFORM 405HFJ)..………......................................................................................41
( 0.141” 402 UN-JACKETED / JACKETED).…………………..............................................................43
(HABIA 0.250” 401 FLEXIFORM 401HFJ).……………………...........................................................45
CORRUNGATED CABLE ½” ((CELLFLEX ½” LCF12-50J)………………………………….….…...… 47
CORRUNGATED CABLE ½” ( SUPER CELLFLEX ½” SCF12-50J)………………………….………..49
RACOMTECH is a professional RF & Microwave technology company, our RF & Microwave products
CABLE ASSEMBLIES
includes the wide range of coaxial cable assembly at a low cost. These coaxial cables operate at
frequencies from DC to 20GHz. Our cable assembly production is equipped with dedicated
assembly and test equipment, we have coax cable trimming machine, cable length cutting machine,
Agilent vector network analysers and the pneumatic soldering station.
Our commitment is to provide our customer high quality cable assemblies at low prices through our
arrangement.
CABLE ASSEMBLIES
Features
Custom design
Wide range of standard products
High Performance
All standard flange types are available
Frequency range:
2.92mm, 3.5mm SMA, SMP, SMC, SMB, N, BNC, TNC, RP-SMA, RP-N, RP-TNC, 7/16, 4/10, UHF, F..
Temperature range:
RACOMTECH has the ability to provide a wide range of solutions to meet most applications
2
© RACOMTECH PTY LTD 2019 All rights reserved
Address: 203-205 Blackburn Road, Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
•TYPE COAX CABLE
•CONNECTOR ON END A
•CONNECTOR ON END B
•LENGTH: Standard = overall length ( or please specify if length between references planes )
•length tolerance (standard = ±2% )
3
© RACOMTECH PTY LTD 2019 All rights reserved
Address: 203-205 Blackburn Road, Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
LMR240 0.240" 50 0.25 0.44 0.68
LMR240-75 0.240" 75 0.24 0.43
LMR400 0.400" 50 0.14 0.25 0.37
Note:
These high performance custom cables have been designed for optimized electrical and
environmental requirements. Cost effective compared with RG cables, they are the perfect
alternative to fulfil your needs.
CURRUGATED CABLES
IMP. Attenuation dB/M @ 25 degree
CABLE TYPE Cable Group
Ohm 2 GHz 3 GHz 6 GHz 8GHz 12GHz
1/2"
SCF12-50J CELLFLEX 50 0.16 0.20 0.30 0.38 0.48
1/2"
LCF12-50J CELLFLEX 50 0.11 0.14 0.20 0.25
Note:
The outer conductor of these cables is constituted of a corrugated tube (spiral or ringed
winding). This construction allows perfect shielding and some bendability while respecting
large bending radius. The height performance level of these cables enables them to be used in
outdoor long length transmission lines.
Application:
RG58 is one of the most popular RG cables.
Due to its construction and raw materials
construction, RG58 is far to be as performant as the
equivalent cables ( RG142, RG223, RG400 )
However, this very flexible cable must be
MIL-C-17/28-RG58 considered for applications requiring low electrical
CABLE ASSEMBLIES
performance and reduced cost.
CONSTRUCTION / DIMENSIONS ELECTRICAL CHARACTERISTICS
material mm inches characteristic impedance 50Ω ± 2Ω
Canter conductor stranded TC 0.90 0.035 operating frequency range DC - 1 GHz
Dielectric solid PE(2) 2.95 0.116 shielding effectiveness 40 dB
Inner shield TC(1) braid 3.66 0.144 voltage withstanding 5 000 V rms
Outer shield - - - peak power 2.6 kW
Jacket black PVC(3) 4.95 0.195 capacitance 96 pF / m 29 pF /ft
velocity of propagation 66 % (5 ns / m)
(1) TC = Tinned Copper Note: typical VSWR for the cable assembly
(2) PE = Polyethylene VSWR=1.2:1
(3) PVC = Polyvinyl Chloride
FREQUENCY / ATTENUATION
MAX POWER (sea level / 25 °C)
GHz dB/ m dB / ft Watts
MECHANICAL CHARACTERISTICS 0.05 0.14 0.04 246
recommended 0.1 0.20 0.06 174
minimum 20 mm 0.787 inch 0.2 0.29 0.09 123
bending radius 0.3 0.36 0.11 100
weight 35 g / m 0.0234 Ibs / ft 0.5 0.47 0.14 78
0.6 0.51 0.16 71
ENVIRONMENTAL CHA RACTERISTICS 0.7 0.56 0.17 66
operating temperature 0.8 0.60 0.18 61
-40 / +85 °C -40 / +185 °F 1.0 0.67 0.20 55
range
attenuation calculation (0.63 x √f GHz) + (0.04 x f GHz)
fire resistance NO
(dB/m)
halogen free NO power calculation (W) 55 / √f GHz
Note: typical attenuation for a couple of connectors
(dB) = 0.045 x √f (GHz)
CABLE ASSEMBLIES
SMA male to RA-SMA male RG58- SMA male Right
00-0416 SMA male straight
XX.XX(M) Angle
6
© RACOMTECH PTY LTD 2019 All rights reserved
Address: 203-205 Blackburn Road, Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
XX.XX(M)
7
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
01-0314 N Male Right Angle, crimp 6 50 Commercial
8
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
Application:
CABLE ASSEMBLIES
CONSTRUCTION / DIMENSIONS ELECTRICAL CHARACTERISTICS
material mm inches characteristic impedance 75Ω ± 3Ω
Canter conductor Solid CCS (1) 0.57 0.022 operating frequency range DC - 1 GHz
Dielectric solid PE(2) 3.71 0.146 shielding effectiveness 40 dB
Inner shield TC(1) braid 4.50 0.177 voltage withstanding 7000 V rms
Outer shield - - - peak power 27 kW
Jacket black PVC(3) 6.15 0.242 capacitance 60 pF / m 18.2 pF /ft
velocity of propagation 66 % (5 ns / m)
(1) CCS = Copper Covered Steel
Note: typical VSWR for the cable assembly
(2) PE = Polyethylene
VSWR=1.35:1
(3) PVC = Polyvinyl Chloride
MECHANICAL CHARACTERISTICS FREQUENCY / ATTENUATION
recommended 30 mm 1.18 inch MAX POWER (sea level / 25 °C)
minimum GHz dB/ m dB / ft Watts
bending radius 0.05 0.09 0.03 335
weight 47 g / m 0.0315 Ibs / ft 0.1 0.13 0.04 237
0.2 0.19 0.06 268
0.3 0.23 0.07 137
0.5 0.30 0.09 106
0.6 0.33 0.10 97
0.7 0.36 0.11 90
ENVIRONMENTAL CHA RACTERISTICS 0.8 0.39 0.12 84
operating temperature -40 / +85 -40 / +185 1.0 0.44 0.13 75
range °C °F attenuation (0.40 x √f GHz) + (0.04 x f
fire resistance NO calculation (dB/m) GHz)
halogen free NO power calculation 75 / √f GHz
(W)
Note: typical attenuation for a couple of connectors
(dB) = 0.045 x √f (GHz)
CABLE ASSEMBLIES
Frequency (GHz) 1.5 2.5 1.5
Impedance (Ω) 75 75 75
Classic level Commercial Commercial Commercial
10
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
material mm inches characteristic impedance 50Ω ± 2Ω
Canter conductor stranded 0.53 0.021 operating frequency range DC - 3 GHz
SPCCS(1) shielding effectiveness 40 dB
Dielectric solid PTFE (2) 1.52 0.06 voltage withstanding 2 000 V rms
Inner shield SPC(3) braid 1.98 0.078 peak power 1.8 kW
Outer shield - - - capacitance 96 pF / m 29 pF /ft
Jacket black Brown FEP(4) 2.95 0.098 velocity of propagation 70 % (4.8 ns / m)
(1) SPCCS= Silver Plated Copper Covered Steel Note: typical VSWR for the cable assembly
(2) PTFE = Polytetrafluoroethylene VSWR=1.25:1
(3) SPC = Silver plated copper
(4) FEP = Fluorinated Ethylene Propylene FREQUENCY / ATTENUATION
MAX POWER (sea level / 25 °C)
GHz dB/ m dB / ft Watts
MECHANICAL CHARACTERISTICS 0.1 0.26 0.08 411
recommended 10 mm inch 0.394 0.2 0.37 0.11 291
minimum 0.3 0.46 0.14 237
bending radius 0.5 0.60 0.18 184
weight 17 g / m 0.0110 Ibs / ft 1.0 0.86 0.26 130
1.5 1.06 0.32 106
2.0 1.24 0.38 92
ENVIRONMENTAL CHA RACTERISTICS 2.5 1.40 0.42 82
operating temperature -55 / +200 °C -67 / +392 °F 3.0 1.54 0.47 75
range attenuation (0.82 x √f GHz) + (0.04 x f
fire resistance Yes(CSA FT6/IEC332-2 calculation (dB/m) GHz)
halogen free NO power calculation 130 / √f GHz
(W)
Note: typical attenuation for a couple of connectors
(dB) = 0.045 x √f (GHz)
11
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
SMA male
N male to RA-SMA male
00-0381 N male straight Reversed
RG316-XX.XX(M)
Polarization
SMA male
N female to RP-SMA N female BH
00-0382 Reversed
male RG316-XX.XX(M) straight
Polarization
12
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
01-0312 N Male Straight, Crimp 6 50 Commercial
13
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
CONSTRUCTION / DIMENSIONS ELECTRICAL CHARACTERISTICS
material mm inches characteristic impedance 50Ω ± 2Ω
Canter conductor Solid SPC(1) 0.94 0.037 operating frequency range DC – 12.4 GHz
Dielectric solid PTFE (2) 2.95 0.116 shielding effectiveness 65 dB (DC-3GHz)
Inner shield SPC (3) braid - - voltage withstanding 5 000 V rms
Outer shield SPC (3) braid 4.19 0.165 peak power 3.4 kW
Jacket black Brown FEP(4) 4.95 0.195 capacitance 96 pF / m 29.3 pF /ft
1) SPCCS= Silver Plated Copper velocity of propagation 70 % (4.8 ns / m)
(2) PTFE = Polytetrafluoroethylene Note: typical VSWR for the cable assembly
(3) SPC = Silver plated copper VSWR=1.2:1 @3GHz
(4) FEP = Fluorinated Ethylene Propylene
FREQUENCY / ATTENUATION
MECHANICAL CHARACTERISTICS MAX POWER (sea level / 25 °C)
recommended minimum 25 mm 0.984inch GHz dB/ m dB / ft Watts
bending radius 0.5 0.30 0.09 665
weight 64 g / m 0.043 Ibs / ft 1.0 0.44 0.13 470
1.5 0.55 0.17 384
2.0 0.65 0.20 332
3.0 0.81 0.25 271
6.0 1.22 0.37 192
8.0 1.45 0.44 166
ENVIRONMENTAL CHA RACTERISTICS 10.0 1.66 0.50 149
operating temperature -55 / +200 °C -67 / +392 °F 12.4 1.90 0.58 133
range attenuation (0.40 x √f GHz) + (0.04 x f
fire resistance yes (CSA FT6 / IEC 332-2) calculation (dB/m) GHz)
halogen free NO power calculation 470 / √f GHz
(W)
Note: typical attenuation for a couple of connectors
(dB) = 0.045 x √f (GHz)
14
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
End A -
SKU Model End B - Connector Photo
Connector
15
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
N Male Right Angle, crimp Commercial
01-0314 6 50
N Male Straight, Clamp Commercial
01-0355 6 50
N Male straight, Reversed polar, Commercial
01-0338 3 50
N Commercial
01-0336 Female Straight, Crimp, 6 50
N Commercial
01-0335 Female, Bulkhead, Straight, Crimp 6 50
Commercial
01-0405 SMA Male Straight, Crimp 11 50
Commercial
01-0407 SMA Female Straight, Crimp, 11 50
Commercial
01-0416 SMA Male Right Angle, crimp 6 50
Male straight, Reversed polar, Commercial
01-0430 SMA 6 50
Female straight, Reversed polar, Commercial
01-0433 SMA 6 50
Commercial
01-0506 TNC Male Straight, Crimp 6 50
Commercial
01-0517 TNC Female straight, crimp, 6 50
Commercial
01-0202 BNC Male Straight, Crimp 4 50
Commercial
01-0215 BNC Male Right Angle, crimp 4 50
Commercial
01-0235 BNC Female, Bulkhead, Straight, Crimp 4 50
Commercial
01-0830 FME Male Straight, Crimp 4 50
Commercial
01-0831 FME Female straight, crimp, 4 50
Commercial
01-0823 SMB Male Right Angle, crimp 6 50
Commercial
01-0609 UHF Male Right Angle, crimp 2 50
Commercial
01-0607 UHF Female straight, crimp, 2 50
16
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
Application:
Due to its stranded inner conductor, RG 400 is much
more flexible than RG142 and RG223. This cable will be
chosen instead of equivalent RG's for specific applications
requiring high flexibility Usable in severe thermal
conditions.
CABLE ASSEMBLIES
CONSTRUCTION / DIMENSIONS ELECTRICAL CHARACTERISTICS
material mm inches characteristic impedance 50Ω ± 2Ω
Canter conductor Solid SPC(1) 0.98 0.039 operating frequency range DC – 12.4 GHz
Dielectric solid PTFE (2) 2.95 0.116 shielding effectiveness 65 dB (DC-3GHz)
Inner shield SPC (3) braid - - voltage withstanding 5 000 V rms
Outer shield SPC (3) braid 4.19 0.165 peak power 3.4 kW
Jacket black Brown FEP(4) 4.95 0.195 capacitance 96 pF / m 29.3 pF /ft
velocity of propagation 70 % (4.8 ns / m)
(1) SPCCS= Silver Plated Copper
(2) PTFE = Polytetrafluoroethylene Note: typical VSWR for the cable assembly
(3) SPC = Silver plated copper VSWR=1.2:1 @3GHz
(4) FEP = Fluorinated Ethylene Propylene
FREQUENCY / ATTENUATION
MECHANICAL CHARACTERISTICS MAX POWER (sea level / 25 °C)
recommended minimum 20 mm 0.79 inch GHz dB/ m dB / ft Watts
bending radius 0.5 0.36 0.11 665
weight 66 g / m 0.0442 Ibs / ft 1.0 0.52 0.16 470
1.5 0.65 0.20 384
2.0 0.76 0.23 332
3.0 0.95 0.29 271
6.0 1.42 0.43 192
8.0 1.68 0.51 166
10.0 1.92 0.58 149
ENVIRONMENTAL CHA RACTERISTICS 12.4 2.19 0.66 133
operating temperature -55 / +200 °C -67 / +392 °F attenuation (0.48 x √f GHz) + (0.04 x f
range calculation (dB/m) GHz)
fire resistance yes (CSA FT6 / IEC 332-2) power calculation 470 / √f GHz
halogen free NO (W)
Note: typical attenuation for a couple of connectors
(dB) = 0.045 x √f (GHz)
17
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
N male to N male N male to RP-SMA male N male to SMA male N female to N male
RG400-xx.x(M) RG400-xx.x(M) RG400-xx.x(M) RG400-xx.x(M)
N female to SMA male RG400- N female to SMA male-RA N male to TNC male N female to UHF male
xx.x(M) RG400-xx.x(M) RG400-xx.x(M) RG400-xx.x(M)
N female to RP-SMA male RP-SMA male to RP-SMA SMA male to SMA male SMA male to SMA female
RG400-xx.x(M) female RG400-xx.x(M) RG400-xx.x(M) RG400-xx.x(M)
BNC male to BNC male TNC male to TNC male TNC male to SMA male TNC male to RP-TNC male
RG400-xx.x(M) RG400-xx.x(M) RG400-xx.x(M) RG400-xx.x(M)
18
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
01-0366 N Male Straight, Crimp 6 50 Commercial
19
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
Application:
RG223 is one of the most popular RG cables. This cable
presents a good compromise between flexibility and
electrical performances.
RG223 can be used instead of RG142 for cost reasons in
(MIL-C-17/84 –RG223) applications that do not require high temperature
resistance.
CABLE ASSEMBLIES
CONSTRUCTION / DIMENSIONS ELECTRICAL CHARACTERISTICS
material mm inches characteristic impedance 50Ω ± 2Ω
Canter conductor Solid SPC(1) 0.89 0.035 operating frequency range DC – 12.4 GHz
Dielectric solid PE (2) 2.95 0.116 shielding effectiveness 65 dB (DC-3GHz)
Inner shield SPC (1) braid - - voltage withstanding 5 000 V rms
Outer shield SPC (1) braid 4.19 0.165 peak power 3.4 kW
Jacket black Black PVC(3) 5.38 0.212 capacitance 96 pF / m 29.3 pF /ft
velocity of propagation 70 % (4.8 ns / m)
(1) SPC = Silver Plated Copper Note: typical VSWR for the cable assembly
(2) PE = Polyethylene VSWR=1.2:1 @3GHz
(3) PVC = Polyvinyl Chloride
FREQUENCY / ATTENUATION
MECHANICAL CHARACTERISTICS MAX POWER (sea level / 25 °C)
recommended minimum 25 mm 0.984 inch GHz dB/ m dB / ft Watts
bending radius 0.5 0.32 0.10 71
weight 55 g / m 0.0372 Ibs / ft 1.0 0.46 0.14 50
1.5 0.57 0.17 41
2.0 0.67 0.20 35
3.0 0.85 0.26 29
6.0 1.27 0.38 20
8.0 1.51 0.46 18
ENVIRONMENTAL CHA RACTERISTICS 10.0 1.73 0.52 16
operating temperature -40 / +85 °C -40 / +185 °F 12.4 1.97 0.60 14
range attenuation (0.42 x √f GHz) + (0.04 x f
fire resistance No calculation (dB/m) GHz)
halogen free No power calculation 50 / √f GHz
(W)
Note: typical attenuation for a couple of connectors
(dB) = 0.045 x √f (GHz)
20
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
N male to N male N male to N female RG223- N male to SMA male RG223- N male to RP-SMA- male
RG223-xx.x(M) xx.x(M) xx.x(M) RG223-xx.x(M)
BNC male to BNC male RG223- SMA male to SMA male- SMA male to SMA female BNC male to SMA male RG400-
xx.x(M) RG223-xx.x(M) RG223-xx.x(M) xx.x(M)
21
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
01-0355 N Male Straight, Clamp 6 50 Commercial
22
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
Application:
Due to its construction and raw materials selection,
RG213 is a cost effectiveness solution in the 10 mm cable
range. This cable may be considered for low frequencies
applications that do not require a high level of screening
(MIL-C-17/74 –RG213) effectiveness.
CABLE ASSEMBLIES
CONSTRUCTION / DIMENSIONS ELECTRICAL CHARACTERISTICS
material mm inche characteristic impedance 50Ω ± 2Ω
s operating frequency range DC – 1.0 GHz
Canter conductor Standed copper 2.26 0.089 shielding effectiveness 40 dB (DC-3GHz)
Dielectric solid PE (2) 7.24 0.285 voltage withstanding 10 000 V rms
Inner shield Copper braid 8.13 0.320 peak power 6.5 kW
Outer shield - - - capacitance 96 pF / m 29.3 pF /ft
Jacket black Black PVC 10.3 0.406 velocity of propagation 66 % (5.0 ns / m)
(1) PE = Polyethylene Note: typical VSWR for the cable assembly
(2) PVC = Polyvinyl Chloride VSWR=1.2:1 @3GHz
FREQUENCY / ATTENUATION
MECHANICAL CHARACTERISTICS MAX POWER (sea level / 25 °C)
recommended minimum 40 mm 1.57 inch GHz dB/ m dB / ft Watts
bending radius 0.05 0.05 0.01 1273
weight 148 g / m 0.0998 Ibs / ft 0.1 0.07 0.02 900
0.2 0.10 0.03 735
0.3 0.12 0.04 636
0.5 0.16 0.05 520
0.6 0.18 0.05 367
0.7 0.20 0.06 318
0.8 0.21 0.06 285
ENVIRONMENTAL CHA RACTERISTICS 1.0 0.24 0.07 271
operating temperature -40 / +85 °C -40 / +185 °F attenuation (0.2 x √f GHz) + (0.04 x f GHz)
range calculation (dB/m)
fire resistance No power calculation 900 / √f GHz
halogen free No (W)
Note: typical attenuation for a couple of connectors
(dB) = 0.045 x √f (GHz)
23
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
COAX CONNECTOR SELECTION
GUIDE
FOR CABLE RG213 ASSEMBLES
24
© RACOMTECH PTY LTD 2019 All rights reserved
Address: 203-205 Blackburn Road, Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
Application:
RG214 is one of the most popular RG cables. For
economic reasons and when thermal conditions allow it,
this cable may be used instead of RG393.
(MIL-C-17/75 –RG214)
CABLE ASSEMBLIES
CONSTRUCTION / DIMENSIONS ELECTRICAL CHARACTERISTICS
material mm inche characteristic impedance 50Ω ± 2Ω
s operating frequency range DC – 6 GHz
Canter conductor Stranded copper 2.26 0.089 shielding effectiveness 65 dB (DC-3GHz)
Dielectric Solid PE (2) 7.24 0.285 voltage withstanding 10 000 V rms
Inner shield Copper braid - - peak power 6.5 kW
Outer shield Copper braid 8.89 0.35 capacitance 96 pF / m 29.3 pF /ft
Jacket black Black PVC 10.3 0.406 velocity of propagation 66 % (5.0 ns / m)
(1) PE = Polyethylene Note: typical VSWR for the cable assembly
(2) PVC = Polyvinyl Chloride VSWR=1.2:1 @3GHz
25
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
COAX CONNECTOR SELECTION GUIDE
FOR CABLE RG214 ASSEMBLES
26
© RACOMTECH PTY LTD 2019 All rights reserved
Address: 203-205 Blackburn Road, Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
Application:
The foam dielectric provides excellent loss and low return
loss levels. The double screen construction (Aluminium
foil + tinned copper braid) offers a high level of shielding
as well as low leakage. This cable will be advised for
(CABLE GROUP 0.195/50) feeder and jumper assemblies in cellular networks as well
as applications requiring easy routing.
CABLE ASSEMBLIES
CONSTRUCTION / DIMENSIONS ELECTRICAL CHARACTERISTICS
material mm inches characteristic impedance 50Ω ± 2Ω
Canter conductor Solid copper 0.94 0.037 operating frequency DC – 6 GHz
Dielectric Foam PE (1) 2.79 0.110 range
Inner shield AL (3) foil 2.95 0.116 shielding effectiveness >90 dB
Outer shield TC (3) braid 3.53 0.39 voltage withstanding 1 000 V rms
Jacket black Black PE(1) 4.95 0.195 peak power 2.5 kW
capacitance 80.3 pF / m 24.5 pF /ft
(1) PE = Polyethylene velocity of propagation 83 % (4.0 ns / m)
(2) Al = Aluminium Note: typical VSWR for the cable assembly
(3) TC = Tinned Copper VSWR=1.2:1 @3GHz
FREQUENCY / ATTENUATION
MECHANICAL CHARACTERISTICS MAX POWER (sea level / 25 °C)
recommended 12.5 mm 0.49 inch GHz dB/ m dB / ft Watts
minimum
0.1 0.12 0.03 557
bending radius 0.5 0.25 0.07 238
weight 28 g / m 0.021 Ibs / ft 1.0 0.36 0.11 169
1.5 0.44 0.14 138
2.0 0.51 0.16 118
ENVIRONMENTAL CHA RACTERISTICS 2.5 0.57 0.18 108
3.0 0.64 0.19 98
operating temperature -40 / +85 °C -40 / +185 °F
4.0 0.74 0.24 78
range
5.0 0.83 0.26 67
fire resistance no
6.0 0.93 0.30 63
halogen free YES, LMR195-FR
attenuation (0.336 x √f GHz) + (0.011 x f
calculation (dB/m) GHz)
Custom Cable Assembly Requirement Note: typical attenuation for a couple of connectors
(dB) = 0.045 x √f (GHz)
•TYPE COAX CABLE
•CONNECTOR ON END A
•CONNECTOR ON END B
•LENGTH: Standard = overall length ( or please specify if length between references planes )
•length tolerance (standard = ±2% )
27
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
N male to N male N male to RP-SMA male N male to SMA male N male to RA-SMA male
LMR195-xx.x(M) LMR195-xx.x(M) LMR195-xx.x(M) LMR195-xx.x(M)
N female to SMA male N female to SMA male-RA N male to TNC male N male to RP-TNC male
LMR195-xx.x(M) LMR195-xx.x(M) LMR195-xx.x(M) LMR195-xx.x(M)
N female to RP-SMA male RP-SMA male to RP-SMA SMA male to SMA male SMA male to SMA female
LMR195-xx.x(M) female LMR195-xx.x(M) LMR195-xx.x(M) LMR195-xx.x(M)
BNC male to BNC male TNC male to TNC male TNC male to SMA male RP-TNC male to RP-TNC
LMR195-xx.x(M) LMR195-xx.x(M) LMR195-xx.x(M) male LMR195-xx.x(M)
28
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
COAX CONNECTOR SELECTION GUIDE
FOR CABLE LMR195 ASSEMBLES
29
© RACOMTECH PTY LTD 2019 All rights reserved
Address: 203-205 Blackburn Road, Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
Application:
The foam dielectric provides excellent loss and low return
loss levels. The double screen construction (Aluminium
foil + tinned copper braid) offers a high level of shielding
as well as low leakage. This cable will be advised for
(CABLE GROUP 0.200/50) feeder and jumper assemblies in cellular networks as well
as applications requiring easy routing.
CABLE ASSEMBLIES
CONSTRUCTION / DIMENSIONS ELECTRICAL CHARACTERISTICS
material mm inches characteristic impedance 50Ω ± 2Ω
Canter conductor Solid copper 1.12 0.044 operating frequency DC – 6 GHz
Dielectric Foam PE (1) 2.79 0.110 range
Inner shield AL (3) foil 2.95 0.116 shielding effectiveness >90 dB
Outer shield TC (3) braid 3.53 0.39 voltage withstanding 1 000 V rms
Jacket black Black PE(1) 4.95 0.195 peak power 2.5 kW
capacitance 80.3 pF / m 24.5 pF /ft
(1) PE = Polyethylene velocity of propagation 83 % (4.0 ns / m)
(2) Al = Aluminium Note: typical VSWR for the cable assembly
(3) TC = Tinned Copper VSWR=1.2:1 @3GHz
FREQUENCY / ATTENUATION
MECHANICAL CHARACTERISTICS MAX POWER (sea level / 25 °C)
recommended 12.5 mm 0.49 inch
GHz dB/ m dB / ft Watts
minimum
0.1 0.11 0.03 560
bending radius
0.5 0.24 0.07 240
weight 28 g / m 0.021 Ibs / ft
1.0 0.34 0.10 170
1.5 0.42 0.13 140
2.0 0.49 0.15 120
ENVIRONMENTAL CHA RACTERISTICS 2.5 0.55 0.17 110
operating temperature -40 / +85 °C -40 / +185 °F 3.0 0.61 0.18 100
range 4.0 0.71 0.22 80
fire resistance no 5.0 0.80 0.24 70
halogen free YES, lmr200-FR 6.0 0.88 0.27 65
attenuation (0.333 x √f GHz) + (0.011 x f
calculation (dB/m) GHz)
Custom Cable Assembly Requirement Note: typical attenuation for a couple of connectors
(dB) = 0.045 x √f (GHz)
•TYPE COAX CABLE
•CONNECTOR ON END A
•CONNECTOR ON END B
•LENGTH: Standard = overall length ( or please specify if length between references planes )
•length tolerance (standard = ±2% )
30
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
N male to N male RP-TNC male to RA-SMA male N male to SMA male N female to RA-TNC male
LMR200-xx.x(M) LMR200-xx.x(M) LMR200-xx.x(M) LMR200-xx.x(M)
N female to SMA male N female to SMA male-RA N male to TNC male N male to RP-TNC male
LMR200-xx.x(M) LMR200-xx.x(M) LMR200-xx.x(M) LMR200-xx.x(M)
UHF male to UHF male BNC male to BNC female SMA male to SMA male SMA male to SMA female
LMR200-xx.x(M) LMR200-xx.x(M) LMR200-xx.x(M) LMR200-xx.x(M)
BNC male to BNC male TNC male to TNC male TNC male to SMA male BNC male to SMA male
LMR200-xx.x(M) LMR200-xx.x(M) LMR200-xx.x(M) LMR200-xx.x(M)
31
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
COAX CONNECTOR SELECTION GUIDE
FOR CABLE LMR200 ASSEMBLES
32
© RACOMTECH PTY LTD 2019 All rights reserved
Address: 203-205 Blackburn Road, Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
Application:
The foam dielectric provides excellent loss and low return
loss levels. The double screen construction (Aluminium
foil + tinned copper braid) offers a high level of shielding
as well as low leakage. This cable will be advised for
(CABLE GROUP 0.240/50) feeder and jumper assemblies in cellular networks as well
as applications requiring easy routing.
CABLE ASSEMBLIES
CONSTRUCTION / DIMENSIONS ELECTRICAL CHARACTERISTICS
material mm inches characteristic impedance 50Ω ± 2Ω
Canter conductor Solid copper 1.42 0.056 operating frequency DC – 6 GHz
Dielectric Foam PE (1) 3.81 0.150 range
Inner shield AL (3) foil 3.94 0.155 shielding effectiveness >90 dB
Outer shield TC (3) braid 4.52 0.178 voltage withstanding 1 500 V rms
Jacket black Black PE(1) 6.10 0.240 peak power 5.0 kW
capacitance 80.3 pF / m 24.5 pF /ft
(1) PE = Polyethylene velocity of propagation 83 % (4.0 ns / m)
(2) Al = Aluminium Note: typical VSWR for the cable assembly
(3) TC = Tinned Copper VSWR=1.2:1 @3GHz
FREQUENCY / ATTENUATION
MECHANICAL CHARACTERISTICS MAX POWER (sea level / 25 °C)
recommended minimum 19.1 mm 0.75 inch GHz dB/ m dB / ft Watts
bending radius 0.1 0.08 0.02 700
weight 50 g / m 0.034 Ibs / ft 0.5 0.15 0.04 360
1.0 0.19 0.07 250
1.5 0.33 0.1 200
2.0 0.38 0.12 170
ENVIRONMENTAL CHA RACTERISTICS 2.5 0.43 0.13 150
operating temperature -40 / +85 °C -40 / +185 °F 3.0 0.50 0.15 140
range 4.0 0.55 0.17 130
fire resistance no 5.0 0.63 0.18 120
halogen free Yes, LMR240-FR 6.0 0.68 0.20 97
attenuation (0.242 x √f GHz) + (0.0033 x f
calculation (dB/m) GHz)
Custom Cable Assembly Requirement Note: typical attenuation for a couple of connectors
(dB) = 0.045 x √f (GHz)
33
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
N male to N male N male to N female LMR240- N male to SMA male N male to TNC male
LMR240-xx.x(M) xx.x(M) LMR240-xx.x(M) LMR240-xx.x(M)
N male to SMA female SMA male to SMA male SMA male to SMA female N male to RP-TNC male
LMR2400-xx.x(M) LMR240-xx.x(M) LMR240-xx.x(M) LMR240-xx.x(M)
BNC male to BNC male TNC male to TNC male TNC male to SMA male BNC male to SMA male
LMR240-xx.x(M) LMR240-xx.x(M) LMR240-xx.x(M) LMR240-xx.x(M)
34
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
01-0341 N Male Right Angle, crimp 6 50 Commercial
01-0334 N Female Straight, Crimp, 6 50 Commercial
01-0333 N Female, Bulkhead, Straight, Crimp 6 50 Commercial
01-0417 SMA Male Straight, Crimp 11 50 Commercial
01-0408 SMA Female Straight, Crimp, 11 50 Commercial
01-0453 SMA Male straight, Reversed polar, 6 50 Commercial
01-0456 SMA Female straight, Reversed polar, 6 50 Commercial
01-0508 TNC Male Straight, Crimp 6 50 Commercial
01-0527 TNC Female straight, crimp, 6 50 Commercial
01-0520 TNC Revered polar Male Straight, Crimp 6 50 Commercial
01-0206 BNC Male Straight, Crimp 4 50 Commercial
01-0207 BNC Female, Bulkhead, Straight, Crimp 4 50 Commercial
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road, 35
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
Application:
The foam dielectric provides excellent loss and low return
loss levels. The double screen construction (Aluminium
foil + tinned copper braid) offers a high level of shielding
as well as low leakage. This cable will be advised for
(CABLE GROUP 0.240/75) feeder and jumper assemblies in Satellite Applications,
Video Applications-CCTV, CATV, baseband or broadband
CABLE ASSEMBLIES
as well as applications requiring easy routing.
CONSTRUCTION / DIMENSIONS ELECTRICAL CHARACTERISTICS
material mm inches characteristic impedance 75Ω ± 2Ω
Canter conductor Solid copper 0.82 0.032 operating frequency DC – 2.5 GHz
Dielectric Foam PE (1) 3.81 0.150 range
Inner shield AL (3) foil 3.94 0.155 shielding effectiveness >90 dB
Outer shield TC (3) braid 4.52 0.178 voltage withstanding 1 500 V rms
Jacket black Black PE(1) 6.10 0.240 peak power 5.6 kW
capacitance 52.9 pF / m 16.1 pF /ft
(1) PE = Polyethylene velocity of propagation 84 % (4.0 ns / m)
(2) Al = Aluminium Note: typical VSWR for the cable assembly
(3) TC = Tinned Copper VSWR=1.2:1 @3GHz
FREQUENCY / ATTENUATION
MECHANICAL CHARACTERISTICS
recommended minimum 19.1 mm 0.75 inch MAX POWER (sea level / 25 °C)
bending radius GHz dB/ m dB / ft Watts
weight 50 g / m 0.034 Ibs / ft 0.03 0.04 0.01 1400
0.05 0.06 0.02 1000
0.15 0.09 0.03 620
0.22 0.11 0.035 510
ENVIRONMENTAL CHA RACTERISTICS 0.45 0.17 0.05 350
operating temperature -40 / +85 °C -40 / +185 °F 0.90 0.24 0.07 250
range 1.50 0.31 0.10 190
fire resistance no 1.80 0.34 0.11 170
halogen free Yes, LMR240-75-FR 2.00 0.36 0.12 160
2.50 0.41 0.13 140
attenuation (0.229 x √f GHz) + (0.0033 x f
calculation (dB/m) GHz)
Custom Cable Assembly Requirement Note: typical attenuation for a couple of connectors
(dB) = 0.045 x √f (GHz)
36
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
BNC male to BNC male N male to N male LMR240- BNC male to F male F male to F male LMR240-
LMR240-75-xx.x(M) 75-xx.x(M) LMR240-75-xx.x(M) 75-xx.x(M)
37
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
Application:
The foam dielectric provides excellent loss and low return
loss levels. The double screen construction (Aluminium
foil + tinned copper braid) offers a high level of shielding
as well as low leakage. This cable will be advised for
feeder and jumper assemblies in cellular networks as well
(CABLE GROUP 0.400/50) as applications requiring easy routing.
CABLE ASSEMBLIES
CONSTRUCTION / DIMENSIONS ELECTRICAL CHARACTERISTICS
material mm inches characteristic impedance 50Ω ± 2Ω
Canter conductor Solid copper 2.74 0.108 operating frequency DC – 6 GHz
Dielectric Foam PE (1) 7.24 0.285 shielding effectiveness >90 dB
Inner shield AL (3) foil 7.39 0.291 voltage withstanding 2 500 V rms
Outer shield TC (3) braid 8.13 0.320 peak power 16 kW
Jacket black Black PE(1) 10.29 0.405 capacitance 78.4 pF / m 23.9 pF /ft
velocity of propagation 85 % (3.9 ns / m)
(1) PE = Polyethylene
(2) Al = Aluminium Note: typical VSWR for the cable assembly
(3) TC = Tinned Copper VSWR=1.2:1 @3GHz
38
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
N male to N male N male to RA-N male N male to N female UHF male to UHF male
LMR400-xx.x(M) LMR400-xx.x(M) LMR400-xx.x(M) LMR400-xx.x(M)
TNC male to TNC male LMR400- SMA male to SMA male N male to BNC male N male to SMA male
xx.x(M) LMR400-xx.x(M) LMR400-xx.x(M) LMR400-xx.x(M)
39
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
01-0301 N Male Straight, Clamp 6 50
01-0326 N Female Straight, Crimp, 6 50
01-0308 N male, Straight, Clamp 6 50
01-0400 SMA Male Straight, Crimp 11 50
01-0454 SMA Male straight, Reversed polar, 6 50
01-0512 TNC Male Straight, Crimp 6 50
01-0514 TNC Female straight, crimp, 6 50
01-0212 BNC Male Straight, Crimp 4 50
01-0611 UHF Male Straight, Crimp 2 50
40
© RACOMTECH PTY LTD 2019 All rights reserved Address: 203-205 Blackburn Road,
Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
CONSTRUCTION / DIMENSIONS ELECTRICAL CHARACTERISTICS
material mm inches characteristic impedance 50Ω ± 2Ω
Canter conductor stranded 0.51 0.020 operating frequency range DC - 18 GHz
SPCCS(1) shielding effectiveness 100 dB
Dielectric solid PTFE (2) 1.63 0.064 voltage withstanding 5 000 V rms
Inner shield - - - peak power 1.9 kW
Outer shield TS(3) braid 2.15 0.086 capacitance 96 pF / m 29 pF /ft
Jacket black Blue 3.2 0.13 velocity of propagation 70 % (4.8 ns / m)
HFS80T(4)
•Note: typical VSWR for the cable assembly
(1) SPCCS= Silver Plated Copper Covered Steel •VSWR=1.2:1
(2) PTFE = Polytetrafluoroethylene
(3)TC = Tine plated copper FREQUENCY / ATTENUATION / 20 °C)
(4) HFS80T: HFS80T MAX POWER (sea level / 40 °C)
GHz dB/ m dB / ft Watts
MECHANICAL CHARACTERISTICS 1.0 0.67 0.20 47
recommended 10 mm inch 0.394 2.0 0.97 0.29 34
minimum 3.0 1.21 0.37 28
bending radius 6.0 1.78 0.54 20
weight 23 g / m 0.0120 Ibs / ft 8.0 2.10 0.64 18
10 2.39 0.72 16
12.4 2.71 0.82 14
ENVIRONMENTAL CHA RACTERISTICS 18 3.39 1.10 12
operating temperature -65 / +150 °C -85 / +302 °F attenuation (0.63 x √f GHz) + (0.04 x f
range calculation (dB/m) GHz)
fire resistance Not applicable power calculation 100 / √f GHz
halogen free yes (W)
Note: typical attenuation for a couple of connectors (dB)
= 0.075 x √f (GHz)
CABLE ASSEMBLIES
End A to End B RG316-
CUSTOM End A - Connector End B - Connector
XX.XX(M)
CABLE ASSEMBLIES
CONSTRUCTION / DIMENSIONS ELECTRICAL CHARACTERISTICS
material mm inches characteristic impedance 50Ω ± 2Ω
Canter conductor stranded 0.92 0.036 operating frequency range DC - 18 GHz
SPCCS(1) shielding effectiveness 90 dB
Dielectric solid PTFE (2) 2.95 0.116 voltage withstanding 5 000 V rms
Inner shield - - - peak power 3.4 kW
Outer shield TS(3) braid 3.50 0.141 capacitance 96 pF / m 29 pF /ft
Jacket black -(4) - - velocity of propagation 70 % (4.8 ns / m)
•Note: typical VSWR for the cable assembly
(1) SPCCS= Silver Plated Copper Covered Steel •VSWR=1.2:1
(2) PTFE = Polytetrafluoroethylene
(3)TC = Tine plated copper FREQUENCY / ATTENUATION / 20 °C)
(4) HFS80T: HFS80T MAX POWER (sea level / 40 °C)
GHz dB/ m dB / ft Watts
1.0 0.39 0.12 315
MECHANICAL CHARACTERISTICS 2.0 0.57 0.17 223
recommended 19 mm inch 0.75 3.0 0.72 0.22 182
minimum 6.0 1.09 0.33 129
bending radius 8.0 1.30 0.39 111
weight 33 g / m 0.0221 Ibs / ft 10 1.49 0.45 100
12.4 1.71 0.52 89
ENVIRONMENTAL CHA RACTERISTICS 18 2.18 0.66 74
operating temperature -65 / +150 °C -85 / +302 attenuation (0.345 x √f GHz) + (0.04 x f
range °F calculation (dB/m) GHz)
fire resistance Not applicable power calculation 315 / √f GHz
halogen free no (W)
Note: typical attenuation for a couple of connectors (dB)
= 0.075 x √f (GHz)
CABLE ASSEMBLIES
SMA male to SMA male
00-0206HFJ SMA male straight SMA male straight
RG402-X.XX(M)-HFJ
CABLE ASSEMBLIES
CONSTRUCTION / DIMENSIONS ELECTRICAL CHARACTERISTICS
material mm inches characteristic impedance 50Ω ± 2Ω
Canter conductor stranded 1.63 0.064 operating frequency range DC - 18 GHz
SPCCS(1) shielding effectiveness 100 dB
Dielectric solid PTFE (2) 5.31 0.209 voltage withstanding 7 000 V rms
Inner shield - - - peak power 6.0 kW
Outer shield TS(3) braid 6.4 0.25 capacitance 94 pF / m 29 pF /ft
Jacket black Blue 7.6 0.3 velocity of propagation 70 % (4.8 ns / m)
•Note: typical VSWR for the cable assembly
(1) SPCCS= Silver Plated Copper Covered Steel •VSWR=1.2:1
(2) PTFE = Polytetrafluoroethylene
(3)TC = Tine plated copper FREQUENCY / ATTENUATION / 20 °C)
(4) HFS80T: HFS80T MAX POWER (sea level / 40 °C)
GHz dB/ m dB / ft Watts
MECHANICAL CHARACTERISTICS 1.0 0.25 0.06 270
recommended 40 mm inch 1.58 2.0 0.38 0.10 182
minimum 3.0 0.49 0.11 136
bending radius 4.0 0.58 0.18 117
weight 140 g / m 0.0350 Ibs / ft 5.0 0.66 0.21 105
6.0 0.74 0.23 96
ENVIRONMENTAL CHA RACTERISTICS 10 1.01 0.30 74
18 1.47 0.44 66
operating temperature -65 / +150 °C -85 / +302
attenuation (0.165 x √f GHz) + (0.04 x f
range °F
calculation (dB/m) GHz)
fire resistance Not applicable
power calculation 900 / √f GHz
halogen free yes
(W)
Note: typical attenuation for a couple of connectors (dB)
= 0.075 x √f (GHz)
CABLE ASSEMBLIES
SMA male to SMA male
00-0219 SMA male straight SMA male straight
RG401-X.XX(M)
CORRUNGATED CABLE ½”
(CELLFLEX ½” LOW LOSS FLEXIBLE LCF12-50J)
Application:
The outer conductor of this cable is constituted of a
corrugated tube (spiral winding).
This construction allows perfect shielding and bendability
while respecting large bending radius. The foam dielectric
provides excellent loss and low return loss levels.
(CELLFLEX ½” LCF12-50J) This cable will be advised for feeder and jumper
assemblies in cellular networks as well as applications
requiring high performance level on long distances.
CABLE ASSEMBLIES
CONSTRUCTION / DIMENSIONS ELECTRICAL CHARACTERISTICS
material mm inches characteristic impedance 50Ω ± 1Ω
Canter conductor CCA(1) 4.8 0.19 operating frequency range DC – 8.8 GHz
Dielectric FP(2) 11.3 0.44 shielding effectiveness 100 dB (DC-3GHz)
Inner shield - - - voltage withstanding 8 000 V rms
Outer shield ACC(3) 13.8 0.54 peak power 38 kW
Jacket black PE(4) 15.8 0.62 capacitance 76 pF / m 23 pF /ft
velocity of propagation 88 % (3.9 ns / m)
(1) CCA= Copper-Clad Aluminium Wire
•Note: typical VSWR for the cable assembly
(2) FP = Foam Polyethylene
•VSWR=1.2:1
(3) ACC = Annularly Corrugated Copper
(4) PE = Polyethylene, PE FREQUENCY / ATTENUATION
MAX POWER (sea level / 25 °C)
MECHANICAL CHARACTERISTICS GHz dB/ m dB / ft Watts
recommended minimum 70 mm (5) 3 inch 0.5 0.05 0.02 1710
bending radius 125mm (6) 5 inch 1.0 0.07 0.02 1180
weight 0.22 kg / m 0.15 Ibs / ft 1.5 0.09 0.03 947
(5) Single bending 2.0 0.11 0.03 809
(6) Repeated bending 3.0 0.13 0.04 644
4.0 0.16 0.05 548
6.0 0.20 0.06 433
ENVIRONMENTAL CHA RACTERISTICS 8.0 0.23 0.07 366
operating temperature -50 / +85 °C -58 / +185 °F 8.8 0.25 0.08 345
range attenuation (0.1 x √f GHz) + (0.01x f GHz)
fire resistance NO calculation (dB/m)
halogen free NO power calculation 1180 / √f GHz
(W)
Note: typical attenuation for a couple of connectors (dB)
= 0.075 x √f (GHz)
CORRUNGATED CABLE ½”
(CELLFLEX ½” LOW LOSS FLEXIBLE LCF12-50J)
CABLE ASSEMBLIES
01-0370 Female Straight, Clamp, 3 50
48
© RACOMTECH PTY LTD 2019 All rights reserved
Address: 203-205 Blackburn Road, Mount Waverley, VIC 3149 Australia
ABN: 51687385403 Tel:03-88029296 Email: sales@racomtech.com.au
ACN: 134 853 473 Fax: 03-88027695 Visit: www.racomtech.com.au
CABLE ASSEMBLIES
CONSTRUCTION / DIMENSIONS ELECTRICAL CHARACTERISTICS
material mm inches characteristic impedance 50Ω ± 1Ω
Canter conductor CCA(1) 3.56 0.14 operating frequency range DC – 10.6 GHz
Dielectric FP(2) 9.3 0.37 shielding effectiveness 100 dB (DC-3GHz)
Inner shield - - - voltage withstanding 5 000 V rms
Outer shield ACC(3) 12.3 0.48 peak power 24 kW
Jacket black PE(4) 13.8 0.54 capacitance 86 pF / m 26 pF /ft
(1) CCA= Copper-Clad Aluminium Wire velocity of propagation 77 %
•Note: typical VSWR for the cable assembly
(2) FP = Foam Polyethylene
•VSWR=1.2:1
(3) ACC = Annularly Corrugated Copper
(4) PE = Polyethylene, PE FREQUENCY / ATTENUATION
MAX POWER (sea level / 25 °C)
MECHANICAL CHARACTERISTICS GHz dB/ m dB / ft Watts
recommended minimum 32mm (5) 1.3 inch 0.5 0.07 0.02 949
bending radius 75mm (6) 2.8 inch 1.0 0.11 0.03 654
weight 0.17 kg / m 0.11 Ibs / ft 1.5 0.14 0.04 523
(5) Single bending 2.0 0.16 0.05 447
(6) Repeated bending 3.0 0.20 0.06 335
4.0 0.24 0.07 300
6.0 0.30 0.09 237
ENVIRONMENTAL CHA RACTERISTICS 8.0 0.36 0.11 199
operating temperature -50 / +85 °C -58 / +185 °F 10.0 0.41 0.13 174
range attenuation (0.1 x √f GHz) + (0.01x f GHz)
fire resistance NO calculation (dB/m)
halogen free YES power calculation 654 / √f GHz
(W)
Note: typical attenuation for a couple of connectors (dB)
= 0.075 x √f (GHz)
CORRUNGATED CABLE ½”
(CELLFLEX ½” SUPER FLEX SCF12-50J)
CABLE ASSEMBLIES
Female Straight, Clamp, 3 50
50
© RACOMTECH PTY LTD 2019 All rights reserved
Address: 203-205 Blackburn Road, Mount Waverley, VIC 3149 Australia