Professional Documents
Culture Documents
Titralab 580 and 585 Titration Workstations: Technical Specifications
Titralab 580 and 585 Titration Workstations: Technical Specifications
Titralab 580 and 585 Titration Workstations: Technical Specifications
D11T071 © Radiometer Analytical SAS • France • 2007-02A • All rights reserved • TitraLab® is a registered trademark of Radiometer Analytical SAS. Data subject to change without notice.
. Titrant volume vs. Time - 1 embedded burette stand – TIM580.
. Polarisation Potential vs. Time. - 2 embedded burette stands – TIM585. Power requirements:
Measuring ranges - Burette volumes available: 1, 5, 10, 25, 47.5 – 63 Hz
50 ml. 115/230 Vac +15 -18%.
- 0.1% to 100% w/w water content. - Burette motor resolution: 18000 steps.
- Min. recommended sample injection: - Complies with ISO 8655-3. Environmental operating conditions:
equivalent to 1 mg of water. - UV-protected encapsulated glass syringe. 5 to 40°C ambient temperature.
- Max. recommended sample injection: - Embedded operating procedures for 20 to 80% relative humidity.
approx. 20 g. burette exchange, air bubble removal
Printout (Flush). Ordering information
- Fill, Empty, Rinse functions.
- Automatic, GLP compliant. TitraLab systems
- Selectable: no, 80 columns. Inputs/outputs The TitraLab 580/xx or TitraLab 585/xx-xx
- 3 levels of detail defined by method. - 1 polarised input from -1 mA to 1 mA in Volumetric Karl Fischer Titration Workstation
- Printed data can be sent as a single 1 µA steps, DC or AC. consists of the TIM580,NB KF Titrator,
character string for LIMS connection (XML). - 2 TTL outputs: titrator can start external monoburette or the TIM585,NB KF Titrator,
peripherals. biburette with a full set of connecting
Results cables, KF cell accessories and one or two
- 1 TTL input: titration can start when signal
- In each method, automatic calculation of input received. of the following burette volumes: 1, 5, 10,
up to 4 results using standard units and 2 - Serial connections for printer/PC, balance, 25 and 50 ml.
user-defined equations. additional titrator for use with TitraMaster
- Standard units: 85 Software and sample changer. Metrology
. ml (titrant) - PS/2 port for PC keyboard and/or bar- To comply with ISO 9001 and ISO 17025
. mg/ml, µg/ml, g/l, mg/l, g, mg, µg, %, code reader. requirements, our Metrology Dept. can
g/kg, mg/kg, mg/g, µg/g, ppm (H2O). supply calibration and verification certificates.
- User-defined result units with equations. General specifications
- Alphanumeric result ID. Languages: English, German, Danish,
- Automatic subtraction of the blank. French, Italian, Spanish and Swedish.
- Automatic sample dilution calculations.
- Automatic statistical calculations: mean Casing: Fully splashproof chemical resistant
and standard deviation on sample, titrant latene®.
and blank results. Display 128x128 dot LCD protected from
spillages with TPX® cover.
Soft-touch alphanumeric keypad (silicone).
Fast and reliable water determination in
Stay in control
Assistant function and extensive data storage give complete confidence in your results
You can ensure your analysis stays on track thanks to an embedded assistant which guides you through
operations such as calibration or reagent installation as well as graphic icons that indicate calibration
status. An extensive non-volatile memory saves your current application methods and lets you check the last
titrant calibrations and sample results obtained.
Stay in control
Assistant function and extensive data storage give complete confidence in your results
You can ensure your analysis stays on track thanks to an embedded assistant which guides you through
operations such as calibration or reagent installation as well as graphic icons that indicate calibration
status. An extensive non-volatile memory saves your current application methods and lets you check the last
titrant calibrations and sample results obtained.
D11T071 © Radiometer Analytical SAS • France • 2007-02A • All rights reserved • TitraLab® is a registered trademark of Radiometer Analytical SAS. Data subject to change without notice.
. Titrant volume vs. Time - 1 embedded burette stand – TIM580.
. Polarisation Potential vs. Time. - 2 embedded burette stands – TIM585. Power requirements:
Measuring ranges - Burette volumes available: 1, 5, 10, 25, 47.5 – 63 Hz
50 ml. 115/230 Vac +15 -18%.
- 0.1% to 100% w/w water content. - Burette motor resolution: 18000 steps.
- Min. recommended sample injection: - Complies with ISO 8655-3. Environmental operating conditions:
equivalent to 1 mg of water. - UV-protected encapsulated glass syringe. 5 to 40°C ambient temperature.
- Max. recommended sample injection: - Embedded operating procedures for 20 to 80% relative humidity.
approx. 20 g. burette exchange, air bubble removal
Printout (Flush). Ordering information
- Fill, Empty, Rinse functions.
- Automatic, GLP compliant. TitraLab systems
- Selectable: no, 80 columns. Inputs/outputs The TitraLab 580/xx or TitraLab 585/xx-xx
- 3 levels of detail defined by method. - 1 polarised input from -1 mA to 1 mA in Volumetric Karl Fischer Titration Workstation
- Printed data can be sent as a single 1 µA steps, DC or AC. consists of the TIM580,NB KF Titrator,
character string for LIMS connection (XML). - 2 TTL outputs: titrator can start external monoburette or the TIM585,NB KF Titrator,
peripherals. biburette with a full set of connecting
Results cables, KF cell accessories and one or two
- 1 TTL input: titration can start when signal
- In each method, automatic calculation of input received. of the following burette volumes: 1, 5, 10,
up to 4 results using standard units and 2 - Serial connections for printer/PC, balance, 25 and 50 ml.
user-defined equations. additional titrator for use with TitraMaster
- Standard units: 85 Software and sample changer. Metrology
. ml (titrant) - PS/2 port for PC keyboard and/or bar- To comply with ISO 9001 and ISO 17025
. mg/ml, µg/ml, g/l, mg/l, g, mg, µg, %, code reader. requirements, our Metrology Dept. can
g/kg, mg/kg, mg/g, µg/g, ppm (H2O). supply calibration and verification certificates.
- User-defined result units with equations. General specifications
- Alphanumeric result ID. Languages: English, German, Danish,
- Automatic subtraction of the blank. French, Italian, Spanish and Swedish.
- Automatic sample dilution calculations.
- Automatic statistical calculations: mean Casing: Fully splashproof chemical resistant
and standard deviation on sample, titrant latene®.
and blank results. Display 128x128 dot LCD protected from
spillages with TPX® cover.
Soft-touch alphanumeric keypad (silicone).
Fast and reliable water determination in