Professional Documents
Culture Documents
DY1024 Manual
DY1024 Manual
DY1024 Manual
Trouble Shooting
User’s Manual An improper sequence order can damage the controller!
133
Situation Probable Cause Solution
Safety Instructions 126
Charge icon not on Solar panel opened
when sunny Reconnect
1. Make sure your battery has enough voltage for the controller or reversed
SOLAR CHARGE CONTROLLER
to recognize the battery type before first installation. Mode setting wrong Set again
2.The battery cable should be as short as possible to minimize Load icon off
Lithium
battery
Settable
voltage Battery low Recharge
loss.
3.The regulator is suitable for lead acid batteries(Flood,AGM, Load icon slow
Build-in MCU
USB
USB
flashing Over load Reduce load watt
GEL )and lithium ions,(note the use of please controller is
timer control
69 49 + - /
arranged for the right type of batter y) it is not suited for Load icon fast Short circuit
flashing protection Auto reconnect
nickel metal hydride, or other batteries.
4.The charge regulator is only suitable for regulating solar Battery too low/ Check battery/
Power off
modules.never connect another charging source to the charge Reverse Connection
regulator.
5.The controller will be hot when it is working,Please install the Technical Parameter
controller on a smooth, well ventilated surface. Model 1210 1220 1230 4820 4830
- System
Product Features + - - Voltage 12V/24V AUTO 48V
1.Build-in industrial micro controller. + + Charge
Current 10A 20A 30A 20A 30A
2.Big lcd display,all adjustable parameter.
3.Fully 3-stage pwm charge management. Display/Setting Discharge
Current 10A 20A 30A 20A 30A
4.Build-in short-circuit protection,open-circuit protection,
reverse protection,over-load protection. V V Max Solar Input <50V <80V
5.Dual mosfet reverse current protection,low heat production.
Battery Type b01 Sealed b02 GEL b03 Flood
LCD Display/Key Browsing Equailzation 14.4V 14.2V 14.6V
Interface Float Charge 13.7V (defaul,adjustable)
voltage
1 main display Press menu to 2 float or CV voltage Discharge Stop 10.7V (defaul,adjustable)
MENU browse different Discharge
V% interface Reconnect
12.6V (defaul,adjustable)
b04 b05 b06 b07
digital display AH hour
amper + UP Set V Battery Type Iron lithium
4 Strands
Iron lithium
5 Strands
lithium ion
3 Strands
lithium ion
4 Strands
Parameter Constant
3.6V*4/*5 4.2V*3/*4
solar panel load DOWN Charging Voltage
- / /
ON/OFF
In interface 2-5,
Recovery
long press menu 3.4V*4/*5 4.0V*3/*4
charge
output Charge Voltage
6 batter y type to enter setting, 3 discharge reconnect
on:equalation/ buce Low Voltage
flicking:float battery and using [up] 2.6V*4/*5 3.1V*3/*4
[down] to set the Protection
parameter, long Low Voltage
menu:switch between different display,or to enter/exit setting 2.9V*4/*5 3.7V*3/*4
press menu Recover y
by long press. V
up:press to increase value. again to exit. b04~b07 Parameters can not be set
H long press
down:press to decrease value.
[down] USB Output 5V/2A