Professional Documents
Culture Documents
ECE Laws III QUESTIONS
ECE Laws III QUESTIONS
ECE Laws III QUESTIONS
pinoybix.org/2014/10/mcqs-in-engineering-laws-and-ethics-part3.html
October 4,
2014
This is the Multiples Choice Questions Part 3 of the Series in Engineering Laws and Ethics as
one of the General Engineering and Applied Sciences (GEAS) topic. In Preparation for the
ECE Board Exam make sure to expose yourself and familiarize in each and every questions
compiled here taken from various sources including past Board Questions in General
Engineering and Applied Sciences (GEAS) field.
1/11
SEE: More Questions and Answers in Engineering Laws and Ethics
101. Which position does a maritime ship main antenna have, when it is connected to the
reserve transmitter and receiver?
A. AA
B. Direction finder
C. Main transmitter
D. Emergency transmitter
102. One of the major components required under the global maritime distress and safety
system is the:
103. One of the following is NOT the major components required on board ship under the
global maritime distress and safety system. Which one?
104. At what position does a maritime ship main antenna have, when it is open circuited
and that any auxiliary antenna is/are connected to the main receiver?
A. AA
B. Emergency transmitter
C. Direction finder
D. Ground
105. What position of maritime ship main antenna, when the radio watch is secured or
when the ship is in electrical storm?
A. AA
B. Main transmitter
C. Grounded
2/11
D. HF
106. What are the two legislative functions of the International Telecommunications Union
in its international conference issues on orbital resources?
107. A person or entity intending to register as VolP service provider is required to post a
performance bond of .
A. P 1 million
B. P 3 million
C. P 5 million
D. P 10 million
108. What refers to as linkage by wire, radio, satellite or other means, of two or more
telecommunications carrier or operators with one another for the purpose of allowing or
enabling the subscriber of one carrier or operator to access or reach the subscribers of the
other carrier or operator?
A. Interconnection
B. Toll patching
C. Gateway
D. Outside plant sharing
A. R. A. 8927
B. R. A. 9287
C. R. A. 8792
D. R. A. 8729
A. P. D. 223
B. R. A. 5734
C. R. A. 9292
D. R. A. 7925
3/11
A. R. A. 8891
B. R. A. 8981
C. R. A. 8918
D. R. A. 8198
A. P. D. 323
B. P. D. 223
C. P. D. 232
D. P. D. 223
114. When was the Electronic Commerce Act of the Philippines approved?
115. When was Republic Act No. 9292 approved by President Gloria Macapagal Arroyo?
116. When was the implementing rules and regulations (IRR) of the R. A. 9292 approved?
117. Under R. A. 9292, who are authorized to render engineering consultation services?
118. Under R. A. 9292, can a Register Electronic Engineer render design services?
A. Yes
B. No
C. Yes if he has more than 5 years experience
D. Yes if he has more than 10 years experience
119. Under R. A. 9292, the Professional Electronic Engineer shall the electronics plan
designed by a Registered Electronic Engineer?
A. review
B. sign
C. seal
D. all of the choices
120. Under R. A. 9292, who are authorized to take charge of or supervise electronics
construction and installation?
. A. current practice
B. current costumer price index
C. minimum basic daily wage
D. all of the above
122. Under R. A. 9292, the rate of retainers’ fee to be charged by the consulting electronics
engineer for routine or ordinary consultation will not be less than per month.
A. P 1,500
B. P 2,000
C. P 2,500
D. P3,000
123. The powers and functions of the Board is provided in of the R. A. No. 9292.
A. Section 5
B. Section 6
C. Section 7
5/11
D. Section 8
124. R. A. 9292, Section 17 states that the result of the board examination shall be released
within days after the examination.
A. 5
B. 10
C. 15
D. 3
125. What is the minimum punishment imposed to any person who shall give any false or
fraudulent statement to the Board to obtain a Certificate of registration and/or Professional
ID Card as Electronics Engineer?
126. The electronic designer will furnish sets of drawing specifications and other contract
documents to the client.
A. 5
B. 3
C. 7
D. 2
127. What is the basic monthly salary scale for salaried ECE practitioners with less than 5
years of active service?
A. P 4,000 to P 8,000
B. P 2,000 to P 5,000
C. P 5,000 to P 9,000
D. P 6,000 to P 10,000
128. “To provide technical specifications for electronics equipment and systems” is under
what field of ECE practice?
A. Engineering consultation
B. Design Services
C. Construction and Installation
D. Inspection and Appraisal
129. “Testing and quality control of electronic products” is under what field of ECE practice?
6/11
A. Education Service
B. Research and Development
C. Manufacturing
D. Maintenance
130. If the ECE consultant’s present is required in another place away from his office,
additional compensation of for every hour he is away from his office or if the place more
than 50 km away from his office.
A. P 1,000.00
B. P 500.00
C. P 250.00
D. P 100.00
131. For professional services rendered by the electronics engineer as consultant for project
with definite duration, the minimum recommended hourly rate is for salaried ECEs.
132. Aside from compensation, the client will pay for the cost of at least “business class”
transportation and accommodation if the meetings are conducted in a place more than km
away from the established office of electronic engineer consultant.
A. 30
B. 40
C. 50
D. 100
133. For court appearance electronics engineer must charge a minimum fee to the client of
not less than per hour per appearance regardless whether the hearing is postponed or not.
A. P 500.00
B. P 250.00
C. P 1,000.00
D. P 100.00
134. For conference, electronics engineer must not charge fee to the client more than per
hour per attendance regardless whether the meeting is postponed or not.
A. P 500.00
B. P 250.00
7/11
C. P 1,000.00
D. P 750.00
135. All are methods of determining the fees to electronics engineers except:
136. When a project involves alterations, repairs, additions, modifications, etc, which does
not involve a whole project, what method is used for computing the professional fee?
137. What method of computing fees is where the electronic facilities are divided into
classifications which have corresponding unit design rate?
138. What is the basic monthly salary scale for salaried ECE practitioner with 5 to 10 years of
active service?
A. P 6,000 to P 20,000
B. P 5,000 to P 8,000
C. P 8,000 to P 12,000
D. P 10,000 to P 15,000
139. What is the basic monthly salary scale for salaried ECE practitioner with more than 10
years of active service?
A. P 15,000 – up
B. P 12,000 – up
C. P 8,000 – up
D. P 10,000 – up
8/11
A. P 1,500 per month
B. P 1,000 per month
C. P 2,000 per month
D. P 2,500 per month
141. What refers to the act of putting together parts of a whole in order to build-up; to erect
or to form and/or to set or establish electronics equipment, systems or facilities?
142. What refers to the process of producing, forming or fabricating electronic equipment
and/or related components, parts, devices and accessories?
A. Quality control
B. Manufacturing
C. Development
D. System design
143. What refers to the act of conceptualizing, planning and projecting a scheme, system
and facility using the arts and science of electronics along with social, economic, financial
and technical consideration?
A. Construction service
B. Consultation service
C. Organizing service
D. Design service
144. What is the act of giving advice and information to client in the area of electronics
engineering and its related fields in line with current internationally accepted standards and
practices?
A. Consultancy design
B. Professional consultation
C. Engineering consultation
D. Consultancy service
145. What is the minimum fine for unauthorized copying of copyrighted works as provided
in the E-commerce Act of the Philippines?
A. P 100,000
B. P 500,000
9/11
C. P 100,000
D. P 50,000
146. What is the minimum penalty for unauthorized copying of copyrighted works as
provided in the E-commerce Act of the Philippines?
A. 6 months imprisonment
B. 12 months imprisonment
C. 2 months imprisonment
D. 3 months imprisonment
147. A secret code which secures and defends sensitive information that crosses over public
channels into a form decipherable only with a matching electronic key is referred to as
A. password
B. username
C. encrypted code
D. electronic key
148. What is the term of the Chairman of the Professional Regulation Commission?
A. 5 years
B. 3 years
C. 6 years
D. 7 years
149. Which one is NOT the basic electrical protection measure in the Philippine Electronic
Codes?
10/11
Series of MCQs in General Engineering and Applied Science
11/11