Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Beaded Bag & Belt TM EAC0301

Designed by Elizabeth Ann White

FINISHED SIZES last 2 sts tog, turn. At end of last


Bag is 10" x 11" not including Handles. row (24 dc). Fasten off.
Belt is 1 3⁄4" wide x 38 1⁄2" long not Holding Sides right sides together,
including Fringe. matching ends of rows and sts
across last row, working through
MATERIALS both thicknesses, join with sc in end
800 yds. ecru cotton sport yarn; of row 5, sc in same row, 2 sc in
Two 7" brass rings; Assorted end of each row and in each st
decorative beads; Tapestry needle; across bottom around to row 5 on
F crochet hook or hook size opposite side of Bag. Fasten off.
needed to obtain gauge Turn Bag right side out.

GAUGE FRINGE
4 sts = 1"; 2 dc rows = 1"; 4 sc rows, For each Fringe, cut two strands each
3 dc rows and one cl row worked 24" long. Holding both pieces to-
in Belt pattern = 4". gether, fold in half, insert hook from
back to front in first ch sp of row 7,
BASIC STITCHES pull fold through, pull loose ends
Ch, sl st, sc, dc, dtr through fold, tighten. Trim ends.
Fringe in each ch sp on both sides of
SPECIAL STITCH Bag.
For cluster (cl), yo 2 times, insert hook Row 2: Working in rows, ch 1, sc in
in next st, yo, pull lp through, (yo, first 49 sts leaving remaining sts BEADS
pull through 2 lps on hook) 2 times, unworked, turn. (49 sc) First Row of Beads
*yo 2 times, insert hook in same st, Row 3: Ch 1, sc in each st across, turn. 1: On this row, you will separate each
yo, pull lp through, (yo, pull through Row 4: Ch 5 (counts as first dtr), skip Fringe into two sections with two
2 lps on hook) 2 times; repeat from next 2 sts, (cl—see Special Stitch, strands of yarn in each section.
*, yo, pull through all lps on hook. ch 5, cl) in next st, *skip next 5 sts, Use pony beads on Fringe unless
(cl, ch 5, cl) in next st; repeat from * otherwise stated (see illustration).
BAG across to last 3 sts, skip next 2 sts,
SIDE (make 2) dtr in last st, turn. (16 cls, 8 ch-5
Rnd 1: Starting at handle, join with sc sps, 2 dtr) BEADED FRINGE
around one brass ring (see illustra- Row 5: Ch 1, sc in first st, (sc in top of
tions), work 164 more sc around next cl, sc in next 5 chs, skip next
ring; twist sts forming about 12 cl) 7 times, sc in top of next cl, sc in
twists around ring, join with sl st in next 5 chs, sc in top of next cl, sc in
first sc. (165 sc made) last st, turn. (51 sc) First row
Row 6: Ch 1, sc in each st across, turn. of beads
Row 7: Ch 5, skip next st, sc in next st,
(ch 5, skip next 2 sts, sc in next st)
across, turn. (17 ch sps)
Row 8: Ch 3 (counts as first dc), dc in
next 2 skipped sts on row before
last, (ch 1, dc in next 2 skipped sts 2: Skip first two strands of first Fringe,
on row before last) across to last hold other two strands from first
ch-5, ch 1, dc in last 2 sts on row Fringe and first two strands from
before last, turn. (35 dc, 16 ch sps) next Fringe together, thread one
Row 9: Ch 3, dc in each st and in each bead onto all four strands about 3⁄4"
ch sp across, turn. (51 dc) below knot of Fringe.
Rows 10–15: Ch 2 (is not used or 3: (Holding other two strands from
counted as a st), dc in each st across, same Fringe and first two strands

turn. At end of last row (45 dc). from next Fringe together; thread
Rows 16–22: Ch 2 (is not used or one bead onto all four strands about
counted as a st), dc next 2 sts tog, 3⁄4" below knot of Fringe) 6 times.
dc in each st across to last 2 sts, dc 4: Skip next two strands from same
Fringe and first two strands from four strands. Thread a couple of
next Fringe. Keep all four skipped decorative beads below first bead.
strands separated from other Tie all four strands into a knot below
strands until later. This will form the bead to secure) across remaining
Center Beaded Section. strands on other side of Center
5: Repeat step 3 across remaining Beaded Section.
strands. Center Beaded Section
Place decorative beads onto un-
Second Row of Beads worked four strands referring to
1: Holding two loose strands from first photo for placement.
Fringe and first two strands below Leave Fringe hanging loose on other
first bead together; thread one side of Bag.
bead onto all four strands about 3⁄4"
below First Row of Beads (see BELT
illustration). Row 1: Ch 12, sl st in first ch to
form ring, ch 1, 7 sc in ring, turn.
(7 sc made)
Row 2: Ch 1, sc in each st across, turn.
Row 3: Ch 5 (counts as first dtr), skip
next 2 sts, (cl, ch 5, cl) in next st,
skip next 2 sts, dtr in last st, turn. (2
Second row
of beads cls, 2 dtr, one ch sp)
Row 4: Ch 1, skip first st, sc in top of
next cl, sc in next 5 chs, sc in top of
2: (Holding last two strands under next cl leaving last st unworked,
same bead and first two strands turn. (7 sc)
2: (Holding other two strands below below next bead together, thread Row 5: Ch 1, sc in each st across, turn.
same bead and first two strands one bead onto all four strands. Tie Rows 6–8: Ch 3 (counts as first dc), dc
below next bead together, thread all four strands into a knot below in each st across, turn.
one bead onto all four strands about bead to secure) 5 times. Rows 9–10: Ch 1, sc in each st
3⁄4" below First Row of Beads) 6 3: (Holding last two strands under across, turn.
times leaving last two strands loose same bead and two loose strands Rows 11–77: Repeat rows 3–10 con-
on this side. together, thread one bead onto all secutively, ending with row 5.
3: Repeat steps 1 and 2 across re- Row 78: Ch 6, skip next 5 sts, sl st in
maining strands on other side of last st. Fasten off.
Center Beaded Section.
FRINGE
Third Row of Beads For each Fringe, cut 10 strands each
1: Skip first two strands below first 36" long. Holding all strands togeth-
bead, hold next two strands under er, fold in half, insert hook in ch sp
same bead and first two strands on end of Belt, pull fold through, pull
Third row
below next bead together; thread of beads loose ends through fold, tighten.
one bead onto all four strands. Tie Repeat on other end of Belt.
the four strands plus the first two Attach beads to several strands
loose strands into a knot below of each Fringe as desired; tie strand
bead to secure (see illustration). in knot below beads to secure.

You might also like