Orton® Technical Services
MATERIAL SAFETY DATA SHEET
————————
Orton® 415
CORROSION INHIBITOR
Revision Date + 10/01/2020
Revision Code 2 OTS/435/1/2020
PT. GALAXY INDO JAYA 24 Hour Emergency Phone
Jakarta, Indonesi (62-21 ) 5918368
Product Brand : Orton®
Code : Orton® 415
Product Name Corrosion Inhibitor
[SECTION II - HAZARDOUS INGREDIENTS
Ingredient Name Weight % : Occupational Exposure ‘Oral LD-50
limits TLV OR PEL :
Amine Based NA NA. NAL
Carcinogenic : Osha: NTP: LARC
Unknown NA, NA, NA.
[SECTION III - PHYSICAL DATA
Color Clear Flash Point NA.
Physical Form + Liquid Evaporation Rate : ONAL
pH 8,00 + 0,50 Biodegradability : No
Specific Gravity + 0,90 + 0,10 Lower Explotion Limit £ ,0,7 % (V)
Odor + Slight Ester
Solubility Completely
[SECTION IV - FIRE AND EXPLOSION DATA
Flammability Classification
Flash Point
Extinguishing Media
Unusual fire and explosion hazards
[SECTION V- HANDLING PROCEDURES
Use gloves chemically resistant to this material when prolonged or frequently repeated
contact could occur. Safety goggles and boots required. Respiratory protection may be needed.
[SECTION Vi - HEALTH HAZARD DATA ]
‘Skin Contact
Wash affected area with soap and water. Consult a physician if irritation persists
Inhalation
Remove person to an uncontaminated area. Administer oxygen if necessary. If breathing
has stopped, administer CPR.
Ingestion
Jf victim is conscious, give milk or water and induce vomiting. Get immediate medical attention.
DS Onton-415 Page 1 of 2 PT. Galaxy Indo JayaOrton® Technical Services
MATERIAL SAFETY DATA SHEET
Orton® 415
CORROSION INHIBITOR
Health Hazards (Acute and chronic) / Effect of overexposure :
1) Repeated or prolonged skin contact with this material can cause moderate iritation and defatting of skin.
2) Contact of eye tissues with liquid and / or high vapor concentrations may cause eye irritation,
3) Excessive inhalation of mists of this product may cause irritation of mucous membranes.
[SECTION Vit - REACTIVITY DATA
Stability table
Hazardous Polymerization
Hazardous Decomposition Product y
[SECTION VIII - SPILL OR LEAK PROCEDURES fi
‘Steps to be taken in case material is released or spilled
Absorb on sweeping compound or other absorbent material
Waste Disposal Dispose off in accordance with exiting Federal, State and Lokal environmental
regulation.
[SECTION IX - SAFE HANDLING AND USE INFORMATION.
Protective Gloves, + Chemical resistant rubber or plastic,
Eye Protection Safety goggles
Other Protective Equipment “ye wash station, safety shower (not necessary)
[SECTION X - SPECIAL PRECAUTIONS AND STORAGE DATA ma)
Precations to be taken in handling : Avoid eye and prolonged skin contact.
‘Avoid excessive inhalation of vapors and / or particle mists.
Use in well ventilated environment.
[SECTION XI - DISPOSAL CONSIDERATIONS
Waste from Residues/Unused Products
In accordance with local and national regulations.
Contaminated Packaging
Rinse empty containers with water and use the rinse water to prepare the working solution.
Can be land-filled or incinerated, when in compliance with local regulations.
[SECTION XII - TRANSPORT INFORMATION J
Not classified as dangerous in the meaning of transport regulations.
‘Biscaimer = Ths information is rurisned witout warranty, expressed or Implied, except that acourate tobe best knowledge oF
Galaxy Indo Jaya ;PT. The data on this sheet relates ony to the specie material designated herein
Galaxy Indo Jaya ;PT, assumes no lgal responsiblity for use or reliance upon these dat,
DS Orton-415, Page 2 of 2 PT. Galaxy Indo Jaya