Professional Documents
Culture Documents
166-57920 Man
166-57920 Man
B-SERIES
B-Series pumps are a good choice for a variety of recirculating, mixing, and transfer applications. Typical pumped liquids
include solvents, resins, and petroleum products. These pumps are well suited for light, medium, and intermittent service.
Design: Drive speeds to 900 rpm; discharge pressures to Rotation: Pumps may be operated in either direction.
200 psi; flow rate to 26.8 gpm; foot or flange mounted; Discharge is always on the side of the pump toward which the
with or without integral relief valve. top of the shaft rotates.
Material: Cast Iron casings with precision machined, Liquid Viscosities: 32 ssu to 100,000 ssu. Adaptable for
heat treated gears and case hardened shafts. Pumps are handling liquids from water soluble to molten lead.
also available in Ductile Iron and Carbon Steel.
Suction Lift: Up to 28 Hg / 31 feet depending on the type of
Bearings: Replaceable iron sleeve bearings. Also liquid being pumped.
available with carbon graphite or bronze bearings.
Drive Options: A-Drive (pump connected to c-face motor
Seal: Compression packing with adjustable gland. Also with adapter bracket and coupling); D-Drive (pump coupled to
available with self adjusting mechanical seal or lip seal. motor mounted on baseplate); GR-Drive (pump coupled to
Mechanical seal and lip seals available with different gear reducer coupled to motor mounted on baseplate); B-Drive
elastomers. (pump and motor connected by V-belt and pulleys mounted on
baseplate).
Lubrication: Self lubricating using the pumped liquid.
Also available for handling non-lubricating liquids. Accessories: Repair Kits; Gear Sets; Bearing Kits; and Seal
Kits. Refer Section 13.
BSM Pump Corp. - MANUFACTURING SOLUTIONS TO PUMPING PROBLEMS FOR OVER 100 YEARS.
(2.1)
BSM ROTARY GEAR PUMPS
DIMENSIONS (INCHES)
Model A B C D E F G H J K L M O Keyway
1 3.00 3.69 1.78 2.00 0.39 7.50 6.25 4.56 0.56 2.38 0.75 3/8
3/8- 1/8 x 1/16
16
2 3.44 4.53 2.31 2.50 0.39 8.47 7.22 5.00 0.63 3.00 0.88 1/2 3/8- 3/16 x 3/32
16
3 4.44 5.72 2.88 3.00 0.45 10.50 8.88 6.19 0.75 3.88 1.25 3/4 3/8- 3/16 x 3/32
16
4 4.44 5.81 2.88 3.00 0.45 11.50 9.88 6.69 0.75 3.88 1.25 1 1/4 3/8- 3/16 x 3/32
16
OPERATING CHARACTERISTICS
BSM Pump Corp. - MANUFACTURING SOLUTIONS TO PUMPING PROBLEMS FOR OVER 100 YEARS.
(2.2)
BSM ROTARY GEAR PUMPS
B-SERIES
0 0 0 0
0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50
P.S.I. P.S.I.
SOLID LINE = GPM
BROKEN LINE = HP
BSM Pump Corp. - MANUFACTURING SOLUTIONS TO PUMPING PROBLEMS FOR OVER 100 YEARS.
(2.3)
BSM ROTARY GEAR PUMPS
B-SERIES
0 0 2 0
0 20 40 60 80 100 120 140 160 180 200 0 20 40 60 80 100 120 140 160 180 200
P.S.I. P.S.I.
0 0 5 0
0 20 40 60 80 100 120 140 160 180 200 0 10 20 30 40 50 60 70 80 90 100
P.S.I. P.S.I.
SOLID LINE = GPM
BROKEN LINE = HP
BSM Pump Corp. - MANUFACTURING SOLUTIONS TO PUMPING PROBLEMS FOR OVER 100 YEARS.
(2.4)
BSM ROTARY GEAR PUMPS
B-SERIES
1 0 2 0
0 20 40 60 80 100 120 140 160 180 200 0 20 40 60 80 100 120 140 160 180 200
P.S.I. P.S.I.
10 300 RPM
300 RPM 0.5
6 0.5
4 0 5 0
0 20 40 60 80 100 120 140 160 180 200 0 10 20 30 40 50 60 70 80 90 100
P.S.I. P.S.I.
SOLID LINE = GPM
BROKEN LINE = HP
BSM Pump Corp. - MANUFACTURING SOLUTIONS TO PUMPING PROBLEMS FOR OVER 100 YEARS.
(2.5)
BSM ROTARY GEAR PUMPS
B-SERIES
1 0 2.5 0
0 20 40 60 80 100 120 140 160 180 200 0 20 40 60 80 100 120 140 160 180 200
P.S.I. P.S.I.
0.5 10
6 300 RPM 300 RPM
9
1
5 0 8
0 20 40 60 80 100 120 140 160 180 200 0 10 20 30 40 50 60 70 80 90 100
P.S.I. P.S.I.
SOLID LINE = GPM
BROKEN LINE = HP
BSM Pump Corp. - MANUFACTURING SOLUTIONS TO PUMPING PROBLEMS FOR OVER 100 YEARS.
(2.6)
BSM ROTARY GEAR PUMPS
DIMENSIONS (INCHES)
BSM Pump Corp. - MANUFACTURING SOLUTIONS TO PUMPING PROBLEMS FOR OVER 100 YEARS.
(2.7)
BSM ROTARY GEAR PUMPS
DIMENSIONS (INCHES)
BSM Pump Corp. - MANUFACTURING SOLUTIONS TO PUMPING PROBLEMS FOR OVER 100 YEARS.
(2.8)