Professional Documents
Culture Documents
Cara Penyetelan Klep Dan Injektor Cat E110b
Cara Penyetelan Klep Dan Injektor Cat E110b
Cara Penyetelan Klep Dan Injektor Cat E110b
Previous Screen
Product: EXCAVATOR
Model: E110B EXCAVATOR 8MF
Configuration: E110B TRACK-TYPE EXCAVATOR 8MF00001-UP (MACHINE)
POWERED BY 3114 ENGINE
i01582952
Illustration 1 g00707095
Front gear group ( 3114 Engine)
(1) Camshaft gear
Illustration 2 g00707096
Front gear group ( 3116 and 3126 Engines)
The basis for the correct fuel injection timing and the valve mechanism operation is determined by the
alignment of the timing for the front gear group. Align timing marks (2) on camshaft idler gear (3) with
the holes on camshaft gear (1) and crankshaft gear (4). This alignment is required in order to provide
the correct relationship between the piston movement and the valve movement.
Inlet
0.38 ± 0.08 mm (0.015 ± 0.003 inch)
Exhaust
0.64 ± 0.08 mm (0.025 ± 0.003 inch)
Table 2
3114 Crankshaft Positions for Valve Lash Setting
Rotation Counterclockwise
Check and Adjust with No. 1 Piston On this Stroke. (1) Top Center Compression Stroke (2)
Injectors 3-4
Check and Adjust with No. 1 Piston On this Stroke. Top Center Exhaust Stroke
Injectors 1-2
Note: Check the crankshaft position with the No. 1 piston at the top center position. Refer to Testing
and Adjusting, "Finding Top Center Position for No. 1 Piston" for more information.
Note: Refer to Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust" for more information in
order to adjust the valves.
Table 3
3116 and 3126 Crankshaft Positions for Valve Lash Setting
Rotation Counterclockwise
Check and Adjust with No. 1 Piston On this Stroke. (1) Top Center Compression Stroke (2)
Injectors 3-5-6
Check and Adjust with No. 1 Piston On this Stroke. Top Center Exhaust Stroke
Injectors 1-2-4
Illustration 4 g00581993
Cylinder and Valve Location for the 3116 and 3126 Engines
Note: Check the crankshaft position with the No. 1 piston at the top center position. Refer to Testing
and Adjusting, "Finding Top Center Position for No. 1 Piston" for more information.
Note: Refer to Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust" for more information in
order to adjust the valves.
Copyright 1993 - 2019 Caterpillar Inc. Sat Jan 26 2019 15:56:06 GMT+0700 (SE Asia Standard Time)
All Rights Reserved.
Private Network For SIS Licensees.