Professional Documents
Culture Documents
SiPlace - Osram LED Guide
SiPlace - Osram LED Guide
SiPlace - Osram LED Guide
In order to achieve the functionality of SMT tools is represented. Beyond that numbers
mounting machines in production regarding for possible alternatives are also indicated.
equipment performance and accuracy with
concomitant flexibility the use of device More detailed information on the recom-
adapted pick & place tools (nozzles) is mended nozzles, like technical drawings,
essential. A zero defect and in particular with material, etc. can be found in the product
LEDs a damage-free processing can only be catalogue on the homepage of SIPLACE
reached and guaranteed by the use of an (www.siplace.com).
appropriate, individual nozzle.
General it must be additionally ensured
Therefore OSRAM Opto Semiconductors for the processing of LEDs that the
selected suitable nozzle for its specific LED process parameters are conformed to the
product groups in co-operation with package characteristics during assembly.
SIEMENS and verified their applicability with
automated assembly test runs on SIPLACE If other nozzle or designs than the
pick and place machines. recommendations are used, it must be
strictly observed, that especially the critical
A catalogue with a linkage of the tools to the and optical relevant area (area over die/s and
associated LED product family is listed on wire bond/s) is not loaded.
the following sides.
If further information needed or support
Beside the SIPLACE number for the regarding the processing of LEDs please
reference nozzle, the general design of the contact OSRAM Opto Semiconductors.
Figure 1: General notice about the layout and content of the summary
DISCLAIMER
PLEASE CAREFULLY READ THE BELOW TERMS AND CONDITIONS BEFORE USING THE
INFORMATION. IF YOU DO NOT AGREE WITH ANY OF THESE TERMS AND CONDITIONS, DO NOT
USE THE INFORMATION.
The Information shown in this document was produced with due care, but is provided by OSRAM Opto
Semiconductors GmbH “as is” and without OSRAM Opto Semiconductors GmbH assuming, express or
implied, any warranty or liability whatsoever, including, but not limited to the warranties of correctness,
completeness, merchantability, fitness for a particular purpose, title or non-infringement. In no event shall
OSRAM Opto Semiconductors GmbH be liable - regardless of the legal theory - for any direct, indirect,
special, incidental, exemplary, consequential, or punitive damages related to the use of the Information.
This limitation shall apply even if OSRAM Opto Semiconductors GmbH has been advised of possible
damages. As some jurisdictions do not allow exclusion of certain warranties or limitations of liability, the
above limitations or exclusions may not apply. The liability of OSRAM Opto Semiconductors GmbH would
in such case be limited to the greatest extent permitted by law.
OSRAM Opto Semiconductors GmbH may change the Information at anytime without notice to user and is
not obligated to provide any maintenance or support related to the Information. The Information is based
on specific Conditions and, therefore, alterations to the Information cannot be excluded.
Reproduction, transfer, distribution or storage of part or all of the contents of this document in any form
without the prior written permission of OSRAM Opto Semiconductors GmbH is prohibited except in
accordance with applicable mandatory law.