This document provides specifications for tubing in an economizer including the material, dimensions, minimum and maximum wall thicknesses, pressures, temperatures, and stress calculations. The tubing is made of carbon steel, has an outer diameter of 2 inches and wall thickness between 0.135 and 0.159 inches, and must withstand pressures up to 775 psi and temperatures up to 1000 degrees Fahrenheit. Calculations show the minimum required wall thickness is 0.071 inches or the recommended thickness of 0.096 inches.
This document provides specifications for tubing in an economizer including the material, dimensions, minimum and maximum wall thicknesses, pressures, temperatures, and stress calculations. The tubing is made of carbon steel, has an outer diameter of 2 inches and wall thickness between 0.135 and 0.159 inches, and must withstand pressures up to 775 psi and temperatures up to 1000 degrees Fahrenheit. Calculations show the minimum required wall thickness is 0.071 inches or the recommended thickness of 0.096 inches.
This document provides specifications for tubing in an economizer including the material, dimensions, minimum and maximum wall thicknesses, pressures, temperatures, and stress calculations. The tubing is made of carbon steel, has an outer diameter of 2 inches and wall thickness between 0.135 and 0.159 inches, and must withstand pressures up to 775 psi and temperatures up to 1000 degrees Fahrenheit. Calculations show the minimum required wall thickness is 0.071 inches or the recommended thickness of 0.096 inches.