Professional Documents
Culture Documents
Lending
Lending
No part of this document may be reproduced or transmitted in any form or by any means,
for any purpose, without the express written permission of TEMENOS HEADQUARTERS SA.
Table of Contents
2 InclusiveBankingSuite Product
Lending Guide
Access ................................................................................................................................................. 30
Procedure ............................................................................................................................................ 30
Main details ......................................................................................................................................... 31
Product Builder settings....................................................................................................................... 31
Product Details .................................................................................................................................... 32
Customer/ Account Stage ................................................................................................................... 33
Basic Details Tab ................................................................................................................................. 33
Account Parameters Tab ..................................................................................................................... 34
Limit Stage ........................................................................................................................................... 35
Limit Parameters Tab .......................................................................................................................... 36
Term Amount Stage ............................................................................................................................ 37
Term Parameters Tab ......................................................................................................................... 37
Amount Parameters Tab ..................................................................................................................... 38
Payment Schedule Stage .................................................................................................................... 40
Principal Interest Stage ....................................................................................................................... 42
Charge Selection Stage....................................................................................................................... 43
Charge Definition Stage ...................................................................................................................... 44
Charge Calculation Tab ....................................................................................................................... 46
Eligibility Stage .................................................................................................................................... 47
Customer Restrictions Tab .................................................................................................................. 47
Period Restrictions Tab ....................................................................................................................... 49
Initial Deposit Tab ................................................................................................................................ 50
Lending Restrictions Tab ..................................................................................................................... 52
Channels Tab ...................................................................................................................................... 53
Product review stage ........................................................................................................................... 54
To change details of an existing AA product ....................................................................................... 55
Loan Operations ......................................................................................................................................... 56
Overview ................................................................................................................................................. 56
Loan Creation .......................................................................................................................................... 56
Direct Loan Input ................................................................................................................................. 56
Access ................................................................................................................................................. 57
Procedure ............................................................................................................................................ 57
Direct Loan Input ................................................................................................................................. 57
Joint Customer .................................................................................................................................... 59
Settlement ........................................................................................................................................... 59
Collateral ............................................................................................................................................. 61
Group Application Details .................................................................................................................... 62
Authorisation of records....................................................................................................................... 62
3 InclusiveBankingSuite Product
Lending Guide
4 InclusiveBankingSuite Product
Lending Guide
5 InclusiveBankingSuite Product
Lending Guide
Document History
Comments:
6 InclusiveBankingSuite Product
Lending Guide
Introduction
This guide aims to provide information regarding the product configuration using Arrangement architecture,
the lifecycle of a loan to maturity, early settlement and write off. The guide is divided into two main
segments, each describing the functionality, parameter set up procedures and deal processing. The two
main segments are;
1. Product Builder
2. Loan operations
These have been predefined and made available for selection while using the product builder to create
child products. Child products inherit properties/conditions from the parent products.
Product Setup Inside of the Product Builder (Defined using the product building wizard)
This chapter provides an overview on the various stages of the product builder and the product conditions
that were configured (by us) per product.
As part of the configuration, only the technical or global parameters were included in a parent product.
Since the system does not allow multi-values for the product group field in product creation, it is not possible
to create only one parent product record for all groups. Therefore, one parent product record shall be
created for each product group.
It is possible that a user is using an existing product as a parent (or model) product to a new product,
possibly because one or two product conditions in the new product differ from those in the parent (or model)
product. In this case, all already defined product conditions of the selected parent/model product are
displayed for the user to amend as desired. The product builder creates a unique, new product out of this,
with all product conditions created newly and named differently for the new product. This is to ensure that
7 InclusiveBankingSuite Product
Lending Guide
when amendments are made in future, they are only made on the product conditions necessary for each
unique product.
The main tables used for product building are;
EM.PRODUCT.GROUP
EM. PRODUCT.LOAN
EM.PRODUCT.PARAMETERS
The InclusiveBankingSuite is delivered with three sample Loan Product groups. Sample shared conditions
for each product group are also released for reference or use by your institution, if suitable. The three Loan
product groups are;
Consumer Loans
Business Loans
Home Loans
8 InclusiveBankingSuite Product
Lending Guide
Finally, products are created by creating the product conditions relating to each. The workflow may be
summarised as below;
9 InclusiveBankingSuite Product
Lending Guide
Inheritance Groups
In the InclusiveBankingSuite, sample Inheritance Groups have been defined for use (if they meet
requirements), and to show how to define conditions for inheritance (when necessary).
In this table, we defined the Inheritance Groups under one Group Code:
List the shared conditions associated with the Group Code (used for inheritance) by clicking on the
icon.
Inheritance Groups can also be viewed and amended by clicking on the icon.
Name Name of the inheritance group. In the model, there are three group called
EmBusiness, Emconsumer and Emhome.
10 InclusiveBankingSuite Product
Lending Guide
Description The description of the inheritance group. This is a text box to facilitate a
complete description as and when required.
Product Line The AA product line the inheritance group is defined for. In the current
release, the product builder works for lending products only, so this is
defaulted to LENDING.
Currency Define the currencies in which your institution will allow loans to be taken
if more than the base currency. These currencies must be available on
the CURRENCY table.
11 InclusiveBankingSuite Product
Lending Guide
Launch Condition Select YES to start defining the shared conditions for the items marked
builder as “Define Now”.
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
Once the record is committed and authorised, the shared conditions group may be used to define shared
conditions for your institution, if necessary.
To access the products associated with the Group Code (used for inheritance), click on the icon.
In building the shared conditions, we defined stages, each with its own activities, these are discussed below:
12 InclusiveBankingSuite Product
Lending Guide
Condition Group This is the shared condition group code defined within the inheritance
group. We defined Default.
In the Shared Condition Details tab, the client-specific values are defined:
13 InclusiveBankingSuite Product
Lending Guide
Currency Define the currency/currencies for which the shared conditions are
required.
Start Date Define the date on which the shared conditions will become available for
inheritance.
Penalty Selection
Condition Name Enter the name of the penalty interest condition. In this example the
condition called OnePercent, which represents 1% pa penalty interest,
would be created.
14 InclusiveBankingSuite Product
Lending Guide
Basic Details
Interest Type Indicate whether the penalty interest is a fixed rate or linked to a floating
rate index.
Accrual Rule Define whether penalty interest will be calculated on the actual days in
the period, for example first day, last day as well as the rounding rules.
Fixed Rate
15 InclusiveBankingSuite Product
Lending Guide
Fixed Rate Specify the fixed interest rate to be applied to penalty interest calculations
Rate Negotiable Indicate whether this rate may be negotiable at arrangement creation
stage.
Floating Rate
Rate Key Define the floating interest rate index key to be used in calculating penalty
interest.
Negative Rate Allowed Indicate whether negative penalty interest rate will be permitted.
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
16 InclusiveBankingSuite Product
Lending Guide
Settlement Parameters
Payout
Disbursal Category In the event of loans being automatically disbursed to another account
held with your institution, define the category code of that account here.
The system will validate that the borrower has an open/active account of
this category code. This is for automatic disbursement only, where the
borrower does not wish to draw from the loan arrangement itself.
Repayment Collection
17 InclusiveBankingSuite Product
Lending Guide
Repayment Rule Specify how you would like the system to treat funds available in the
repayment account, for example when the account holds an available
balance, less than what is to be collected. Options are;
1. Full – The amounts due will be deducted from repayment account
even if the account becomes overdrawn.
2. None – If the repayment account does not hold enough funds to
cover the due amount, settlement will not be attempted.
3. Partial – The repayment amount due will be deducted from the
repayment account only to the extent of the available balance. In
InclusiveBanking, we defined automatic retrial of settlement where
the system checks during Close of Business and collects additional
funds that become available in the repayment account until the
amount due is fully settled. This is done by the Transaction cycler
function of T24. For further information, please refer to the
Transaction Cycler user guide.
Note: The system does not make use blocked Initial deposit amounts
for automatic settlement of loans.
Repayment Rule Indicate whether the rule defined above may be negotiated at
Negotiable arrangement creation stage.
Repayment Category In the event of loans being automatically repaid from another account
held with your institution, define the category code of that account here.
The system will validate that the borrower has an open/active account of
this category code. This is for automatic repayment only, where the
borrower does not wish to deposit to the loan arrangement itself.
18 InclusiveBankingSuite Product
Lending Guide
Charge Collection
Same Charge Rules Specify if charge collection rules are to be the same as repayment
collection rules, i.e. to be collected from a designated account on the due
date.
Automatic Negotiable Indicate whether the rules defined above may be negotiated at
arrangement creation stage.
Collection Rule Indicate how you would like the system to respond when the amount due
in charges is not available in the designated repayment account on the
due date.
19 InclusiveBankingSuite Product
Lending Guide
Collection Rule Indicate whether the rule defined above may be negotiated at
Negotiable arrangement creation stage.
Collection Category In the event of charges being automatically collected from another
account held with your institution, define the category code of that
account here. The system will validate that the borrower has an
open/active account of this category code. This is for automatic collection
of charges only, where the borrower does not wish to deposit to the loan
arrangement itself.
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
Overdue Parameters
Basic Details
Ageing Type Indicate whether overdue processing will follow number of days or
number of missed repayments.
Bill Settlement Indicate whether only bills repaid in full are to be considered as settled.
For more information, please refer to the AA Lending user guide.
20 InclusiveBankingSuite Product
Lending Guide
Age Bills Indicate whether a bill needs to be considered for further aging when it is
deemed to have been settled. For more information, please refer to the
AA Lending user guide.
Grace Period
Grace Days/Bills In the Basic Details, it was decided whether to follow number of days or
number of overdue payments (bills). Indicate here when the bill which is
due is to be moved to grace status.
Enter ‘0’ if Grace period does not apply for your institution.
During grace status penalty interest is accrued but not posted should the
borrower pay before the end of the grace period.
Grace Notice Days How many days after entering grace status until a chaser/advice is to be
sent to the borrower?
Frequency Define how often a chaser/advice is to be sent to the borrower during the
grace status.
21 InclusiveBankingSuite Product
Lending Guide
Delinquent Period
Delinquent Days/Bills In the Basic Details, it was decided whether to follow number of days or
number of overdue payments (bills). Indicate here when the bill which is
due is to be moved to delinquent status.
Penalty interest accrued is now applied.
Delinquent Notice Indicate the number of days after the loan has entered delinquent status
Days that the system should generate the chaser/advice.
Frequency Define how often a chaser/advice is to be sent to the borrower during the
delinquent status.
Non-Accrual Basis
22 InclusiveBankingSuite Product
Lending Guide
NAB Days/Bills Indicate the number of days since the bill has gone into arrears when the
loan is to be moved to ‘Non-Accrual’ status.
The calculation of penalty interest is now suspended.
Chaser Advice How many days after entering Non-Accrual status until a chaser/advice
is to be sent to the borrower?
Frequency Define how often a chaser/advice is to be sent to the borrower during the
Non-Accrual status.
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
Payoff/Closure Parameters
Payoff Parameters
Payoff Expiry Days Specify the number of days after which a payoff bill expires. A payoff is
executed whenever a client wishes to pay off their loan and close the
contract ahead of the maturity date.
Settle Dues Indicate whether all amounts due prior to the payoff date should be
considered as settled or not.
Please refer to the AA Lending user guide for more information on Payoff
functionality.
23 InclusiveBankingSuite Product
Lending Guide
Closure Parameters
Closure Method Select the closure method for arrangements of this product. Options are
Manual or Automatic.
Closure Type Indicate whether automatic closure is to take place based on contract
balance (being zero) or on maturity date.
Closure Period Provide the number of days after which the closure action is to be
triggered on arrangements where the automatic closure is based on
maturity date.
Posting Restrictions Select the ‘posting restriction’ to be applied to the account when the
automatic closure is being processed.
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
24 InclusiveBankingSuite Product
Lending Guide
25 InclusiveBankingSuite Product
Lending Guide
Product Details
Field name Description
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
26 InclusiveBankingSuite Product
Lending Guide
Product Groups
Overview
This table is used to create Product Groups under which Products are to be designed. The
InclusiveBankingSuite is delivered with Three (3) product groups predefined for reference purpose. Your
institution may use these product groups (if they meet requirements) or create new ones based on your
organisation’s loan product requirements.
Access
...Product Parameters>>AA Loans>>Product Parameters>>New Loan Product Group
Procedure
To create a new Product Group
1. Click on the New Loan Product Group icon
2. Enter the group details fields as described below
3. Link the shared conditions (created under inheritance groups) to the respective properties
4. Proof and publish the Group record.
27 InclusiveBankingSuite Product
Lending Guide
Description The description of the name above. This is a text box to facilitate a
complete description as and when required.
Range start Specify the category code range start for products to be created under
this Product group. For AA Lending, the category range 3101 to 3399 is
available.
Range end Specify the category code range start for products to be created under
this Product group.
Currency Define the currencies in which your institution will allow loans to be taken
for products in this group. These currencies must be available on the
CURRENCY table.
Start Date The start date of the group and related products.
Global Conditions
Global conditions are Group Parent Conditions that apply to all products in the same group and are unlikely
to differ from one product to the other. These are predefined by the InclusiveBanking team and should not
be amended without exercising due care. No user input is required on Global Conditions version.
28 InclusiveBankingSuite Product
Lending Guide
Shared Conditions
In this version, shared condition created using the inheritance group are linked to the properties to form a
second level of parent conditions for the Group. This is done as follows;
1. Select “Inherit” on the stage level for the properties whose conditions are to be inherited.
2. Select the parent condition defined previously, from the lookup list
For all the other items left with the default setting of “Define”, the Product builder workflow will present the
respective stages (input screens) for you to define the product conditions.
Parent Product Code The name of the parent product used for building products with the
shared conditions configured below.
Parent product Name The description of the name above. This is a text box to facilitate a
complete description as and when required.
Note: It is possible to define various product parents with different
inherited conditions or without any inheritance where all product
conditions are to be defined in the product builder. The parent product
code field may be expanded to create an additional parent records.
29 InclusiveBankingSuite Product
Lending Guide
Stage Level Select Inherit or Define. Where inherit is selected, an existing condition
must be linked on the Parent condition field. No further input required with
“define” selection.
Once the product group record is committed, it needs to be proofed and published before Products can
be created. This is done using the Manage icon available on the list of Product groups.
To proof the Product Group, click the icon and to publish. Global Parent conditions should be
proofed and published first before the Parent conditions.
Access
Product Parameters>>Loan Products >>Loan Product>>New Loan product
Procedure
To create a new Product group
1. Click on the New AA Loan Product icon
2. Link the Product to a Product Group, a Parent Product and enter the Product details
3. Follow the workflow stages as described below
4. Proof and publish the Product.
30 InclusiveBankingSuite Product
Lending Guide
Main details
Product Group The Product group where the new product belongs
Product Parent The Group parent code defined previously at Group definition stage.
31 InclusiveBankingSuite Product
Lending Guide
Product Details
Category Enter the product category. This category code should fall within the
category range defined in the Product Group. Where the category code
has not been created previously, the New category link may be used to
create the category code without exiting the workflow.
Currency Enter the Product currencies. The product currencies should fall within
the Currency list defined in the Product Group.
Start Date Enter the start date of the product. Start date can be in the past
meaning back dated arrangements may be opened.
32 InclusiveBankingSuite Product
Lending Guide
33 InclusiveBankingSuite Product
Lending Guide
Base Date type Select the base date to determine the contract anniversary date
Convention negotiable Indicate whether user are allowed to change these settings on contract
input
34 InclusiveBankingSuite Product
Lending Guide
Date Adjustment Select the date adjustment to specify the action to be taken during the
automatic recalculation of payment schedules if the derived date is a non-
working day. Options are:
1. Value – Only the Value date of repayments entries will be adjusted
(Actual payment date is not adjusted).
2. Period - Actual payment dates will be cycled
Input not allowed with Calendar date convention.
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
Limit Stage
35 InclusiveBankingSuite Product
Lending Guide
Use Limit Select Yes if the limit definition is required, else select No.
Limit Type If User Defined is selected, then Limit conditions need to be defined in
the subsequent fields as described in the next section.
If Default is selected, the system automatically creates a limit record of
an amount equivalent to the loan amount using the default IBS predefined
LIMIT.REFERENCE records as follows:
8310 – Consumer Loans Non-Revolving
8320 – Consumer Loans Revolving
8330 – Business Loans Non-Revolving
8340 – Business Loans Revolving
8350 – Home Loans Non-Revolving
8360 – Home Loans Revolving
Limit Reference If the limit type field was set to “User Defined”, enter the
LIMIT.REFERENCE code to be used to create the limit.
For more information please refer to the Limits User guide
Single Limit Whether the Limit listed in LIMIT.REFERENCE is for exclusive use of the
Arrangement.
36 InclusiveBankingSuite Product
Lending Guide
Default Term Enter the default term for all contracts if applicable for the product being
defined. Leave as blank if not applicable
Term Negotiable Indicate whether users are allowed to change the contract term at
contract input.
Minimum Term The minimum term allowed for the product. The last letter should be one
of the following; DWMY
Breakage Action Indicate whether the system should display an error or override message
when the rule is not met.
Maximum Term The maximum term allowed for the product. The last letter should be one
of the following; DWMY
37 InclusiveBankingSuite Product
Lending Guide
Breakage Action Indicate whether the system should display an error or override message
when the rule is not met.
Cooling period Enter the number of days within which the contract can be pre-closed
without a penalty.
For the cooling period functionality to take effect a “Request payoff”
operation needs to be triggered and the arrangement has to be repaid
through the LENDING-SETTLE-PAYOFF activity during the cooling
period. Upon triggering these activities, Accrued interest amount for the
arrangement till the pre-closure date is reversed. Any interest amount
that has already made due/capitalized will not be reversed and will be
included as part of the payoff bill.
If this is done within the Cooling period specified no interest will be
calculated for the principal amount.
38 InclusiveBankingSuite Product
Lending Guide
Default Amount Enter the default Amount for all contracts if applicable for the product
being defined. Leave as blank if not applicable
Amount Negotiable Indicate whether user are allowed to change the default Amount at
contract input.
Breakage Action Indicate whether the system should display an error or override message
when the rule is not met.
Breakage Action Indicate whether the system should display an error or override message
when the rule is not met.
Revolving Indicate if the contract amount should be revolving or not. The options
are;
1. No – Revolving functionality not required
2. PAYMENT- any payment against the outstanding amount, whether
due or not due, will result in the available amount increasing.
3. PREPAYMENT - only repayments against the outstanding amounts
not yet due will result in the available amount increasing
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
39 InclusiveBankingSuite Product
Lending Guide
Disbursement Type Indicate whether loans under this product are to be disbursed fully or
progressively.
Automatic Disbursal Specify if contract opened under this product should be automatically
disbursed on authorisation of the contract.
Disbursal negotiable If the Automatic Disbursal setting can be amended at contract input
Repayment Frequency Specify the default repayment frequency for contracts opened under
this product
Frequency negotiable Indicate if the default repayment frequency can amended at contract
input
40 InclusiveBankingSuite Product
Lending Guide
Repayment Type Indicate the repayment type to be set for contracts opened under this
product. Options are;
Prepayment Action What should happen when loan prepayment is made? Options
supported are;
1. Recalculate instalment amount based on the new reduced principal
2. Recalculate the residual amount
3. Recalculate the term by keeping the instalment amounts unchanged.
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
41 InclusiveBankingSuite Product
Lending Guide
Calculation Source Select the source balance to be used for interest calculation
Interest Type Specify if the principal interest is calculated using a fixed rate or is
linked to a floating rate index
Day Basis The day basis to be used for principal interest calculation.
Note:
In the InclusiveBankingSuite Interest day basis automatically defaulted
based on payment schedule frequency settings.
If Interest Calc. Method is Flat and Payment Type is Constant
Monthly, Day Basis is defaulted to ‘A’ (360/360).
If Interest Calc. Method is Flat and Payment Type is Constant
Weekly or Constant Bi-Weekly, Day Basis is defaulted to ‘G’
(366/364).
42 InclusiveBankingSuite Product
Lending Guide
Accrual Rule When accruing interest, how should the system determine which
amounts to include in each day's balance, the actual days to include in
the period (e.g. first day, last day or Both)
Calculation threshold Specify the maximum loan balance for which interest will not be
calculated, it applicable.
Minimum interest Indicate the minimum interest amount to be posted for a contract if
amount applicable. If the calculated interest amount is less than the amount
specified in this field, system will waive or adjust the interest amount, as
per the setting below.
Minimum interest Indicate if the calculated interest amount has to be waived or adjusted.
waive Defines if the calculated interest amount goes below minimum interest
amount set, should the system waive the interest amount or post the
minimum amount.
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
43 InclusiveBankingSuite Product
Lending Guide
Same condition Do you want to define the same charge condition for all currencies
available for the product? Options are;
1. Yes – A default charge condition will be created for all Currencies
defined for the product.
2. No – Separate charge conditions are to be defined for each
currency of the product
3. Not applicable – Select this option if the charge does not apply
to the product.
Charge link Specify if the charge should be applied as a result of an activity, breaking
a restriction or attached to repayment schedule
44 InclusiveBankingSuite Product
Lending Guide
3. New arrangement
4. Payoff
5. Principal Decrease
Linked restriction If the charge is linked to a restriction, select one of the following
restrictions to be applied.
1. Paying off after cooling off period
2. Principal decrease count in Period
3. Principal decrease tolerance
4. Principal decrease total in period
5. Principal decrease within
Restriction Period If a period based restriction is selected, provide the period. Accepted
values are nnM or nnY or nnD or nnW
Restriction count Enter the number of transactions to be evaluated in the restriction within
the given period.
Restriction Value If the restriction is amount based, provide the value to be evaluated
within the given period
45 InclusiveBankingSuite Product
Lending Guide
Charge Type Indicate whether the charge is fixed or calculated. If calculated, additional
information is required as described below.
Calculation Source Select one of the following as the basis for the calculated charge.
1. Current principal
2. Loan Amount
3. Overdue Principal
4. Transaction
Minimum Amount Defines the minimum charge amount to be applied to calculate charges.
If the charge calculated is less than the amount defined in this field then
minimum amount will be charged
46 InclusiveBankingSuite Product
Lending Guide
Calculation Threshold Define the threshold amount (base amount) below which charge
amount will not be calculated
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
Eligibility Stage
Product eligibility conditions are defined at this stage. At least one restriction must be defined for the
product.
47 InclusiveBankingSuite Product
Lending Guide
Minimum Age If borrowers of this product must be of a minimum age, enter that age
here
Breakage action Should a particular borrower not meet the product condition, what type
of a message should be displayed?
Note: Breakage action must be defined for all eligibility conditions
applicable to the product as described below.
Maximum Age If borrowers of this product must be of a maximum age, enter that age
here
Gender If this product is restricted by gender, Select one of the options from the
lookup list.
1. Male
2. Female
3. Other (Non Individual)
Classification Indicate which classification type(s) of customer may make use this
product.
1. Full Member
2. Non Member
3. Non-voting Member
4. Provisional/Pending Member
5. Resigned Member
6. Resigned
7. Deceased
48 InclusiveBankingSuite Product
Lending Guide
Minimum Customer This is the minimum number of months that a customer must be a
Months member of your institution before they can make use of this product if
relevant, else leave blank
Minimum Saving This is the minimum number of months that a customer must have a
Months savings account in operation with your institution before being able to
make use of this product. leave blank if not applicable
Categories to be evaluated for savings months are maintained in
Product Parameters>>Loan Products >>Product Builder
Parameters>>Global Product Parameters
49 InclusiveBankingSuite Product
Lending Guide
Currency This multi-value field set allows initial deposit parameters to be defined
for each currency of the product.
Deposit Amount Indicate the amount of savings that a borrower is required to have before
availing a loan under this product.
The system will automatically block the savings value as defined on the
product until the loan is settled, or the block is manually released.
In this release of the system, the block does not reduce in line with the
outstanding (current and overdue) principal, but remains constant until
the loan is settled or the block is manually released.
The block is applied by using the AC.LOCKED.EVENTS functionality.
Please refer to the Accounts user guide for more details.
50 InclusiveBankingSuite Product
Lending Guide
Deposit Percentage If the initial deposit should be a percentage of the loan amount applied
for, indicate the rate here.
However, unlike the Deposit Amount field which does not reduce in line
with outstanding (current and overdue) principal balance, the initial
deposit amount blocked based on the percentage entered on this field
will reduce if the field Progressive Release is set to Yes.
Other currencies Specify if accounts with different currency than product currency are
allowed allowed for initial deposit calculation.
Breakage Action Specify the breakage action when initial deposit requirement is not met.
Progressive Release If the deposit amount blocked based on the Deposit Percentage field
above should be released in line with the outstanding (current and
overdue) principal balance, then this field should be set to Yes. For
example, if a loan amount of USD1000 is approved and 10 percent
(USD100) is initially blocked in a customer’s indicated account, the
amount blocked will be automatically reduced to USD90 when the
customer makes a payment of USD100 on the loan thereby reducing
the outstanding balance to USD900. In summary, for this example, the
amount of deposit blocked will be equivalent to 10 percent of the
outstanding balance of the loan at any time during the life of the loan.
Increase on Funds If Partial Blocking Allowed field is set to Yes, then this field allows a
Availability user to specify whether or not additional funds should be blocked (up to
the maximum required) when more funds become available in the
indicated initial deposit account.
Apply New Percentage In the case that the initial deposit percentage is changed on this table
For while loans exist in the system, should the new percentage apply to
both new and existing loans or should it apply to new loans only? Select
the option applicable to this product.
51 InclusiveBankingSuite Product
Lending Guide
Loan purpose If the product is restricted to certain purposes, select the loan purpose
code from the lookup list. Loan purpose codes are maintained under
General Menu>>Administrator>>System Tables>>Loan Purpose.
This is a multi-value field. If the product relates to ALL loan purposes,
then leave this blank.
Source of funds If the product is restricted to certain Sources of Funds, select the Fund
ID from the lookup list.
Source of Fund codes are maintained in General
Menu>>Administrator>>System Tables>>Source of Funds.
Maximum Loans Enter the maximum number of active loans allowed per customer under
this product.
52 InclusiveBankingSuite Product
Lending Guide
Application Status Fail You may specify in this field, which application status will be
automatically set on loan application in case any eligibility check failed
with error.
Check Type and Select any other eligibility checks that may apply to your product.
Check Param Options are:
Channels Tab
53 InclusiveBankingSuite Product
Lending Guide
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
See the Shared conditions section of this guide for other condition definition procedures.
Once satisfied with the product settings, the product may be proofed and published. Some settings may be
amended during the product review stage. The product build status can be seen in AA
Product Builder>>Products
To amend any of the stages, click on the icon to input the changes. To continue the product build after
successful product review, click on the icon to continue on to the proof and publish stages. When
complete, the publish stage will be updated with an activity status of process complete. The product
together with all defined product conditions are created in AA.
54 InclusiveBankingSuite Product
Lending Guide
55 InclusiveBankingSuite Product
Lending Guide
Loan Operations
Overview
In AA, contracts are known as arrangements. A loan arrangement is an agreement with a customer for a
loan product. It has an agreement date, is account-based and is currency specific. The arrangement
contains all details of the agreement such as:
Amount and duration of the contract
Interest rate
Fees/commissions/charges
Repayment details such as repayment frequency
Repayment modalities
When a new arrangement is created, the arrangement is considered as a ‘Commitment’. The arrangement
is the central place for managing the agreement once it is in force. In this guide, the terms Arrangement
and Loan may be used interchangeably.
In the InclusiveBankingSuite, a number of Loan operations have been preconfigured and are delivered with
the system for your use. These operations include:
1. Loan creation (Direct Loan Input)
2. Individual Loan Disbursement
3. Group Loan Disbursement
4. Individual Loan repayments
5. Group Loan repayments
6. Loan Top-up and rescheduling
7. Loan payoff
8. Loan Write off
Loan Creation
In InclusiveBankingSuite, arrangement records are created automatically in two ways:
1. Through Loan Origination – Once an application is successfully approved, the final stage in loan
Origination is the creation of the loan record. Please refer to the InclusiveBankingSuite Loan
Origination guide for more information.
2. Through Direct Loan Input - Should your institution choose not to use the Loan Origination solution
in InclusiveBankingSuite, Loan details may be entered on the Direct Loan Input application.
Arrangements are then generated automatically upon authorization of the Direct Loan Input record.
56 InclusiveBankingSuite Product
Lending Guide
Access
All in one RBHP>>Loans AA>>Loans>>New Loan
Procedure
1. Click on the New Loan icon
2. Enter all the required data on the fields as described below
3. Commit the record and authorise
Loan Input ID The system generates the next available reference number, the format is
DL (application code) followed by the Julian date (74th day of the year
2019) followed by a 5-digit sequential number.
Customer Type Indicate whether the loan is being created for an individual or a group.
The two Customer Type options are mutually exclusive. If Group is
selected, then the system hides Customer Id and if Individual is selected,
the system hides Group Id. Similarly, the tab “Group Application Details”
will be hidden if Individual customer type is selected.
Note: If customer type is set to Individual yet the customer is linked to a
group, such a loan is treated as an individual loan and excluded from all
group loan reports. To create a loan for one or few group members, select
group customer type and maintain only the current borrowers on the
group application details tab.
57 InclusiveBankingSuite Product
Lending Guide
Customer As individual was selected in the Customer Type field (above) the system
requires you to enter the Customer ID and on entering the code, the
customer’s last name displays as enrichment characters to the field.
Validate that you are working with the correct customer record.
Asset Class This is a no-input information-only field indicating the worst classification
of the customer from all his or her existing loans.
Loan Action Select New Loan to indicate new loan creation. Reschedule and Top up
actions are described in the Loan Maintenance section of this guide.
Loan Details
Loan Product Select the product code from the lookup table. The value entered in this
field will manage the values entered in the subsequent fields.
Amount requested Enter the amount that the customer wishes to borrow.
Term Requested Enter the repayment term. Valid input is 12W, 3M, 2Y.
Payment Frequency The repayment frequency is populated from the product where the
conditions have been defined.
Repayment Start Date The default is the automatically set as the input date plus the payment
frequency. Enter the desired repayment start date if different from the
default date.
Currency The currency populates from the product. If a multi-currency product, the
field is left blank for the user to select the relevant currency, from the list
of currencies linked to the product.
Interest Rate The interest rate populates from the product. If the product is set to allow
negotiation of the interest rate or margin, the interest rate and Margin rate
fields are set as editable. Any amendments on the defaulted values are
validated against the product negotiation rules.
Instalment Amount The system calculates and displays the repayment amount for
information purposes.
The instalment may be adjusted to suit the customer’s requirements e.g.
Round off to the nearest 100 value. In such a case, the system accepts
the requested instalment amount and automatically recalculates the term
requested.
And then on day Select the desired loan repayment date during the month, if the system-
generated date is not suitable for the customer. For example, customers
may wish to match they loan repayment date with the salary payment
date.
Applicable to Monthly instalment loans only.
Source of Funds Select the source of funds from the lookup table
Loan Purpose Select the loan purpose from the lookup table.
58 InclusiveBankingSuite Product
Lending Guide
Loan Reason This is a free-format input field for you to capture any other relevant
information.
Joint Customer
Joint Customer Address The address details in the multi-value set of fields
Joint Customer Identification ID number of the joint customer. The data is displayed for
you to verify that you have entered/selected the correct joint
customer number. This customer will be jointly responsible
for the loan and the terms and conditions thereof.
Settlement
59 InclusiveBankingSuite Product
Lending Guide
Disburse Account The loan disbursement account is defaulted here as per the
product settings. Amend suitable to negotiate the
disbursement settlement Account / conditions
Repay Account The loan repayment account is defaulted here as per the
product settings. Amend suitable to negotiate the
settlement account / conditions
Charge Account The charge settlement account is defaulted here as per the
product settings. Amend suitable to negotiate the
settlement conditions
Guarantors
Guarantor may be linked to the loan. With a multi-value field linked to both the customer table and the
guarantor table, existing customers of the institution may be selected as guarantors or non-customers could
be created as guarantors in the guarantor table and thereafter selected as guarantors.
In the screen below, guarantor Ids starting with a “G” digit were created on the guarantors table and those
with six digits are records from the Customer Information File.
Guarantor ID Select the Guarantor ID from the look up table, which contains both records
from the Live Customer and Guarantor tables.
The New Guarantor link may be used to access the guarantor table and create
new external guarantors if not already existing.
Amount Enter the amount of the guarantee provided. If the value entered is greater
than the available balance on the (above) account, the break rule message
will be displayed and depending on how the parameter has been defined, you
will be able to proceed or not.
60 InclusiveBankingSuite Product
Lending Guide
No validation is carried out on the amounts entered where the Guarantor is not
a customer and does not hold an account in your institution.
When a non-customer (external) Guarantor is selected and the Guarantee
Amount entered, the rule defined in the ‘Mandatory Checklist for External
Guarantors’ is checked and the fields presented for input.
Document
Use the scan icon to take an image of the document as evidence of the
pledge over the item offered as collateral. Else, if the image already exists,
select the Document ID from the lookup table.
A field has been provided in the IM.DOCUMENT.IMAGE application to store
the Loan Account number.
Collateral
Collateral details may be entered optionally on this tab.
Applicant’s Collateral Id Pull down on the lookup field and select an existing collateral record for
the application. Only collaterals created for the loan borrower will be
displayed. In the case of group loans, all existing collaterals for all group
members will be displayed for selection. Since collaterals bear the
customer number in its Id, it is easy to identify which group member has
what collateral record.
61 InclusiveBankingSuite Product
Lending Guide
Guarantor’s Collateral If an internal guarantor (T24 Customer), pull down on the lookup field
id and select an existing collateral record for the application.
Group Member The system populates this field with the customer number
of each group member
Amount Requested The system divides the amount requested by the number
of group members evenly and allows changes as may be
necessary. At all times, the system ensures that the total
amount requested tallies with the individual group member
amounts.
Term Requested The system defaults the term requested for each member
of the group and allows changes as may be necessary.
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
Authorisation of records
Once the direct loan input record is committed successfully, the record is held in the unauthorised records
file waiting to be authorised. Unauthorised records can be accessed through the Pending records enquiry
on the AA Loans main page
62 InclusiveBankingSuite Product
Lending Guide
Live arrangements
Upon successful authorisation of the Direct Loan Input records, arrangements are automatically
generated in InclusiveBankingSuite and can be viewed in the AA Loans enquiry. Any of the filter options
can be used to narrow down the display of live arrangements.
When launched, the enquiry displays results as shown below in a composite screen.
This icon leads to the single customer view where all the Customer information may be viewed.
This icon displays the arrangement overview screen for more information about the loan.
Click on this icon to access other loan operations e.g. Loan disbursement, Loan repayment etc.
63 InclusiveBankingSuite Product
Lending Guide
To view the arrangement screen, click on the drilldown icon on the Arrangement Conditions
Arrangement
Note: Arrangement fields are driven by the setup of each product condition for the product in use. If default
values are configured at the product level, such default values are populated on the arrangement screen
and may be enabled for amendment if the product set up allows for such default values to be negotiated. If
set as non-negotiable, default values/ other field are disabled for input/ amendments.
64 InclusiveBankingSuite Product
Lending Guide
Customer The Customer number of the borrower is defaulted here as entered in the
new arrangement screen.
Primary officer Enter the account officer responsible of the relationship with the
borrower.
Limit Ref Enter the Limit reference defined for the product. Leave as Null if Limits
are in use for the product.
Limit Serial Enter the Limit reference serial number as defined for the product. Leave
as Null if Limits are in use for the product.
Account Mnemonic An alternate key which can be used to reference the account may be
entered here.
65 InclusiveBankingSuite Product
Lending Guide
Amount Enter the Loan Amount as requested. The amount entered here is
validated against Minimum and Maximum parameters defined in the
Term Amount Product condition.
Term Enter the period of time by which the amount must be repaid followed by
either Days (D), Weeks(W), Months(M) or Years(Y)
Maturity Date The date on which the committed loan amount is to be fully repaid based
on TERM and arrangement start. When a new arrangement is input
maturity date is calculated for the TERM from arrangement start date and
defaulted here.
Loan Purpose Select the Loan purposes from the lookup list.
Loan purpose codes are maintained in
General Menu>>Administrator>>System Tables>>Loan purpose
66 InclusiveBankingSuite Product
Lending Guide
All the fees defined for the product in use are defaulted on the arrangement screen. Each of the fees may
or may not be available for amendment based on the product settings. If overriding of charges is allowed
for the product, Charge override fields will be triggered when the record is validated for the calculated
charges to be waived or negotiated.
Amount The calculated charge amount based on charge calculation rules defined
in the product, or the fixed fee amount applicable.
New Amount Enter the new charge amount negotiated with the Customer. Enter Zero
“0” to waive all the charges
Type Select the payment type from the lookup list. Payment types are defined
under the following main categories.
67 InclusiveBankingSuite Product
Lending Guide
Frequency This field indicates the frequency at which the payments will be made due. This
may be defined using the calendar utility accessed through the frequency icon.
Property For each Payment type, specify the Properties with amounts to be paid.
Prop % Define a percentage in the range of 0 to 100 that would be applied on the
outstanding balances and made due. Only the percentage of the amount would
be issued in the bill and made due. The remaining amount would remain on
their respective balances and any further calculation would be based on this
balance.
Property % is only allowed for ACCOUNT and INTEREST properties.
The payment type should be belong to CALCULATED type with the
CALC.TYPE set as ACTUAL.
Start Indicate the actual payment start date. If Start date is mentioned then the
payment frequency if specified is applied on the start date. Else, it is defaulted
from the Base Date.
Amount There can be two amounts for each payment definition, Calculated Amount and
Actual Amount. An actual amount can be entered to override the calculated
amount or manual payments. When adhoc payments are defined, the actual
68 InclusiveBankingSuite Product
Lending Guide
Active Select Yes or No. This field may be used as a switch to turn off the
Settlement instruction temporarily without having the need to clear or
delete the field contents. If the field is set to NO, then it means the
instructions are not active.
Account Contains the Account number from where funds are to be debited and
credited against this payment type. Multiple accounts could be defined
here and the rules of funding is governed by the PAYIN.AC.DB.RULE
field.
In InclusiveBanking, the first Customer’s account of the category defined
in the product is defaulted on this field.
Rule Indicate the manner in which system should utilise the funds available in
the repayment Account during settlement process.
1) FULL: System debits the repayment account to the extent of the
amount due irrespective of whether or not the funds are available in
the specified account.
2) PARTIAL: System debits the repayment Account only to the extent
of funds available.
3) NONE: System would not debit the repayment if funds are not fully
available to settle the dues.
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
69 InclusiveBankingSuite Product
Lending Guide
Loan Disbursement
In AA, Loans may be disbursed automatically upon authorisation, if the Schedule and settlement conditions
are set as so, or manually through Cash, Cheque or Account transfer. Loans can be disbursed individually
for each customer or in bulk for borrowers belonging to the same Customer Group.
Access
RBHP>>Teller>>Loan Operations>>Disbursement
Procedure
Disbursement by Cash
70 InclusiveBankingSuite Product
Lending Guide
Loan Account The Account number where the loan asset is maintained. This account is
automatically opened by the system when the loan is created using the
category code of the product.
LCY Disbursement The loan amount available for disbursement is defaulted on this filed and
Amount may be amended if only part of the loan is to be disbursed.
Disbursement by Cheque
Loan Account The Account number where the loan asset is maintained. This account is
automatically opened by the system when the loan is created using the
category code of the product.
Loan Currency The Account number where the loan asset is maintained. This account is
automatically opened by the system when the loan is created using the
category code of the product.
71 InclusiveBankingSuite Product
Lending Guide
Loan Account The Account number where the loan asset is maintained. This account is
automatically opened by the system when the loan is created using the
category code defined for the product.
Credit Account This is the account to be credited with the proceeds of the loan. All of the
Customer’s accounts (except Loan accounts) are displayed on the
lookup list.
Treasury Rate The treasury rate as defined in the currency table is defaulted on this
field.
72 InclusiveBankingSuite Product
Lending Guide
the addition of the Treasury Rate and the Customer Spread. In case the
Treasury Rate and Customer Rate is null then allows to input exchange
rate in Customer Rate. If Customer rate is entered, then Customer
spread will be calculated and defaulted with the difference between
Treasury rate and Customer Rate.
Customer Spread Identifies the Customer's Exchange Spread to be applied for this
transaction. The Customer Spread defined in this field will be applied to
the Treasury (buy/sell) Rate to generate the final Rate of the transaction,
i.e. the exchange rate which is applicable to the Transaction. Input
allowed only when the Customer Rate is not entered.
Group Disbursement
In the InclusiveBankingSuite, we provide the functionality whereby loans belonging to members of the
same group can be disbursed from a single screen.
Access
RBHP>>Teller>>Operations>>Group Disbursement
The group disbursement screen is auto-launched when Group disbursement option is selected. Group ID
and Account officer may be used to filter the display of the enquiry.
The Enquiry displays a composite screen as shown below providing the list of groups with loans available
for disbursement as per the filters applied.
73 InclusiveBankingSuite Product
Lending Guide
Procedure
Group Name The name of the group where the borrowers belong.
Select Yes or No. Only rows marked as yes for disburse will
Disburse
be processed.
74 InclusiveBankingSuite Product
Lending Guide
Disb Account Select the Account to be credited with the proceeds of the loan. The
system provides a list of all accounts of the customer of the category
defined in the Group Bulk Payments parameter table. A Nostro or internal
account may also be entered on this field if the category code is defined
in the Group Bulk Payments parameter table.
If the credit account entered here belongs to another customer (such as
the group account), an override message is displayed for acceptance.
Please refer to the Group Management user guide for more information.
Total Amount On verifying the record, the Total amount of loans to be processed is
defaulted.
Completed disbursements
This enquiry displays the results after processing the Bulk FT records by OFS. Applicable statuses are,
1. Processed Successfully
2. Partially processed
3. Failed
Click on the icon to see the status of individual FT records and correct any that failed to process.
The Group Disbursement Details enquiry will display results as follows,
The status of each FT is shown on the enquiry. In case of failed transactions, click on the icon to
correct the problematic entries and commit the record to resubmit the FT.
75 InclusiveBankingSuite Product
Lending Guide
Access
RBHP>>Teller>>Loan Operations>>Repayment
Procedure
1. On the List of Loans, click on the icon to navigate to the Loan operations dashboard.
2. Select the Repayment operation to be performed.
3. Enter the repayment amount and review the defaulted field values.
4. Commit the record.
5. Authorise the record using the Unauthorised FT or TT records version.
Note: For all the repayments operations types, the versions are similar for each payment mode and the
fields for input are described once in this guide. The only differentiating factor is the
TELLER.TRANSACTION or FT.TXN.TYPE.CONDITION codes mapped on the version and linked to AA
activities in ACTIVITY MAPPING property class. Please refer to the AA Lending user guide for more
information on activity mapping.
Repayment by Cash
76 InclusiveBankingSuite Product
Lending Guide
Customer The Customer whom the loan that is to be repaid belongs to.
Loan account The Loan account to be credited with the repayment amount.
LCY Deposit Amount Enter the repayment amount. If in excess of the due amount, the system
will apply the balances as per the remainder rules defined in the Payment
rules conditions of the product.
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
Repayment by Cheque
Customer The Customer whom the loan that is to be repaid belongs to.
Loan account The Loan account to be credited with the repayment amount.
Value Date Enter the value date of the transaction in this field.
Narrative Any free format narrative may be entered on this field in required.
77 InclusiveBankingSuite Product
Lending Guide
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
Debit Account This is the account to be debited with the repayment funds. All of the
Customer’s accounts (except Loan accounts) are displayed on the
lookup list.
Loan Account The Account number where the loan asset is maintained. The repayment
will reduce the loan directly in the loan account. At any time, an Account
statement can be extracted to view the movement of funds in and out of
the Loan account.
Treasury rate The treasury rate as defined in the currency table is defaulted on this
field.
78 InclusiveBankingSuite Product
Lending Guide
Customer spread Identifies the Customer's Exchange Spread to be applied for this
transaction. The Customer Spread defined in this field will be applied to
the Treasury (buy/sell) Rate to generate the final Rate of the transaction,
i.e. the exchange rate which is applicable to the Transaction. Input
allowed only when the Customer Rate is not entered.
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
Group Collections
In the InclusiveBankingSuite, we provide functionality for processing group repayments from a single
screen. This functionality may be used where group repayments are to be captured directly into the system
manually. The group collections screen is controlled by the configuration defined in the Group Bulk
Payments Parameters.
Access
RBHP>>System Parameters>>Customer Tables>>Group Tables>>Group Bulk Payments Parameters
79 InclusiveBankingSuite Product
Lending Guide
Default Process Value Select Yes or No as the default process value for line items in the Group
collection sheet. Only items marked as Yes are processed when the
Group collection is authorised. If Yes is set as the default, line items to
be skipped will need to be marked as No at deal processing and vice
versa.
Payment Type Enter the payment type to be configured in the current multi-value set of
fields. All the payment types defined in this table will be available in a
lookup list of payment type in the Group collection sheet.
Transaction Type Enter the FT.TXN.TYPE.CONDITION code to be used for this payment
type.
Default Payment Type If Yes is selected, the repayment type defined here will be auto populated
Name? for every member of the group. If No is selected, This repayment type will
not be displayed but will be available in the lookup list for selection.
Allowed Credit Enter valid category codes here. Customers’ accounts of the category
Categories codes defined here will be filtered and made available on a lookup list for
selection as the repayment Account, i.e. the Account to be credited with
the repayment funds.
Default Loan If Yes is selected, the total amount due will be prepopulated on the
Repayment Amount? amount field. You only need to compare the amount with the actual
repayment and amend according if the customer paid a different amount.
If No is selected, amounts due will not be prepopulated.
FT OFS Version If your institution uses a different version other than the Default OFS
version defined by Temenos, enter the FT version here.
Access
RBHP>>Teller>>Loan Operations>>Group Collection
Procedure
1. On the group Collections Composite screen, click on the icon to access to the Collection
screen.
2. Enter the relevant values on the fields described below.
80 InclusiveBankingSuite Product
Lending Guide
3. Commit the record and authorise through the Unauthorised Group Collections enquiry.
Group ID Enter the Group ID for whom repayments to the loans are to be
processed. All members of the group will be displayed on the screen.
Process Select No to skip a particular Customer. Line items marked as Yes will
be validated for processing.
Payment Type The payment type as defined in the Group Bulk Payments parameters
table. Expand the sub-value field to add more payment items if
applicable.
Payment Account The Loan account or Savings account to be Credited with the repayment
funds.
Amount The amount paid by the customer. For Loan, the total amount due is
defaulted here so no input is required if the customer pays full amount.
Group Dr Acc The Group Account is defaulted here. In the InclusiveBankingSuite, each
group should have a linked Group Account where the Bulk Group
Repayment is deposited. An Internal (Wash) Account may also be used
as a Group Account. Group collections are then processed against the
deposit in the group account. Please refer to the Group Management
user guide for more information on Groups Accounts.
81 InclusiveBankingSuite Product
Lending Guide
Control Total Enter the total Deposit Amount made by the group, as held in the group
account, to validate against the line items.
Hint: The TSM service should be running in AUTO mode for the records to be processed.
2. In case of the transaction failing, click on the icon to access the Group Collection details screen
and review failed transactions.
3. Click on the icon to correct the errors and resubmit the FT record.
Loan Maintenance
A number of loan maintenance activities may be performed directly on the arrangement through the New
Activities link on the arrangement overview screen. Activities are actions performed on loan arrangements
and allow you to make modifications to the various elements of existing arrangements. Examples of other
typical modifications:
A change in Interest rate
Adjusting a bill amount
Close an arrangement
Term and Amount changes (InclusiveBankingSuite functionality described in Top-up and
Reschedule section below)
Procedure
1. On the Arrangement Overview screen, click on the New Activity link
82 InclusiveBankingSuite Product
Lending Guide
3. Enter the relevant data and remember to have the record authorized for the change to become
‘live’.
Access
All in One RBHP >> AA Loans >> Loans >> New Loans
Procedure
1. On the New Loan screen, enter the customer details
2. Select the loan action e.g. Top-up or reschedule
3. Enter all the required data on the fields as described below
4. Commit the record and authorise
83 InclusiveBankingSuite Product
Lending Guide
Loan Input ID The system generates the next available reference number, the format is
DL (application code) followed by the Julian date (279th day of the year
2016) followed by a 5-digit sequential number.
Customer Type Indicate whether the record is being created for an individual or a group.
The two Customer Type options are mutually exclusive. If Group is
selected, then the system hides Customer Id and if Individual is selected,
the system hides Group Id. Similarly, the tab “Group Application Details”
will be hidden if Individual customer type is selected.
Customer As individual was selected in the Customer Type field (above) the system
requires you to enter the Customer ID and on entering the code, the
customer’s last name displays as enrichment characters to the field.
Validate that you are working with the correct customer record.
Asset Class This is a no-input information-only field indicating the worst classification
of the customer from all his or her existing loans.
For Arrangement Select the loan arrangement to be amended from the look up list. The
system lists only the loans that were previously created using Direct Loan
Input. Loans created using Loan Origination are to be amended using a
similar input screen in the Loan origination Module.
84 InclusiveBankingSuite Product
Lending Guide
Loan Details
Loan Product The product code of the Loan selected is displayed.
Amount requested Enter the top-up amount that the customer wishes to borrow.
Term Requested Enter the new repayment term requested, if any. E.g. If the initial loan
was payable in 6M and the customer requests for a 3M extension with
the Top-up, enter 9M on this field. Leave the field as blank if no Term
change is requested.
Payment Frequency The current repayment frequency of the loan selected is populated.
Instalment Amount The system calculates after the Top-up and/or reschedule and displays
the repayment amount for information purposes.
Source of Funds Select the source of funds from the lookup table
Loan Purpose Select the loan purpose from the lookup table.
Loan Reason This is a free-format input field for you to capture any other relevant
information.
GUARANTOR INPUT Guarantor management for top-up and reschedule operations will be
supported in future releases of InclusiveBankingSuite.
The AUDIT Version displays audit details such as who was the inputter, who the authoriser, and so forth,
which are not available for entry or editing as they are automatically updated by the system.
Procedure
85 InclusiveBankingSuite Product
Lending Guide
2. The simulation runner starts the Payoff mechanism to calculate the dues for Outstanding Capital,
Interest and any Charges linked to the loan.
3. Once the simulation is executed successfully, review the payoff bill generated to inform the Customer
the final amount to be paid.
4. Capture the Payoff Amount using the Payoff Loan operation version described in the Repayments
operations section above.
5. The payoff bill is marked as settled and the loan is account is updated to “pending closure” status to be
closed based on the parameters defined in the Closure Conditions of the product.
6. To close the account manually, click on the New Activity icon in the Arrangement Overview screen.
Select the Execute icon on the Close arrangement activity.
86 InclusiveBankingSuite Product
Lending Guide
8. The Loan Account is marked as closed. Account closure will be processed during the next Close of
Business batch job.
87 InclusiveBankingSuite Product
Lending Guide
Procedure
1. Click on the New Activity link on the arrangement overview screen
2. Select Write off arrangement activity and click on the Execute icon.
3. Enter the Write off description
88 InclusiveBankingSuite Product
Lending Guide
5. The loan is written off against the PL category/Internal account defined in the accounting allocation
rules.
Please refer to the AA Lending user guide for more information on the AC.ALLOCATION.RULE
table.
Access
Role based menu>>All in One RBHP>>Loans AA>> Arrears/ Provisioning>>Loans Written Off
Screen
A screen, like the one displayed below is shown, allowing you to filter the records for on screen enquiry.
When the enquiry displays, it will appear like the screen shown below
89 InclusiveBankingSuite Product
Lending Guide
Procedure
1. Set up WOF loan recovery parameters
2. Set up Account product for contingency accounts
3. Record recovery transactions in Cash, Cheque or Account transfers
Access
All in One Page > Product Parameters > AA Products > AA provisioning and WOF parameters
90 InclusiveBankingSuite Product
Lending Guide
Recovery Category This is the Profit and Loss code that is credited with recovery funds
Contingency Customer This is the Category code used to open the customer contingent
Category account where written off items are maintained.
The category code must fall within the contingent category range
defined on ACCOUNT.PARAMETERS. For contingent accounts to be
automatically opened, an account product for recovery accounts should
be set up using the category code defined here.
Please refer to the Accounts Manual on contingency accounts and
account product set up
Contingency Internal This is the Category code used to open the contingent control account
Category for contra entries
Contingent Account Parameter used to determine whether Contingent control accounts are
Level to be maintained at customer level or branch level. If customer level is
selected, the next field, customer control account category becomes
mandatory. If Branch level is selected, the contingent internal category
becomes mandatory.
Customer Control The category code under which customer contingent control accounts
Account Category are to be opened
Recovery order Define here the order in which recovery funds are to be applied on
written off balances. Balances are maintained property wise on the
WOF loan contingent account as contained in the balance maintenance
arrangement condition at the time of write off.
91 InclusiveBankingSuite Product
Lending Guide
1. The process is initiated when a loan write off activity is authorized and the arrangement is set to
PENDING.CLOSURE or CLOSE. If the status remains as CURRENT then the loan is not completely
written off and the subsequent steps will fail.
2. The AA arrangement and underlying account are closed by the service BNK/EM.WOF.PROCESS. It
takes 2 Close of Businesses (COB) to close the underlying Account.
3. A loan recovery account (Contingency Account) is opened in the loan currency using the WOF loan
account as the alternate ID.
4. If not already present, a Control account in the loan currency is opened for the customer(if
GIC.BD.PARAMETER is set to CUSTOMER) or for the branch(if GIC.BP.PARAMETER is set to
BRANCH) – this is also a contingent account
5. Details of failed record are displayed on the Unsuccessful WOF Recovery enquiry. The COB process
automatically checks for any failed records now corrected and retries to create the recovery accounts.
6. The Loan account is debited with the written off amount and the contingency control account is credited.
7. The OFS messages are stored in a work file EM.WOF.RECOVERY.WRK showing the results and
failure reasons in any.
8. In addition to transferring the WOF balance to the recovery account as shown below.
92 InclusiveBankingSuite Product
Lending Guide
WOF balances are stored on the Account property wise as contained in the balance maintenance
property as the time of write off.
Overview
The functions described below enable tellers to accept and record deposits made against written off
loans. Recovery payments can be made in Cash, Cheque or Account transfers.
Access
All in one page >> Teller>>Transactions>>Deposit into Written off loan
Procedure
1. Select the menu option
2. Click on the New Deal button
3. Enter the written off loan account number or select the contingency account number from drop
down list.
4. Select the currency deposited
5. Enter the repayment amount and commit the record
6. The system will produce a Cash Deposit Advice
Note: These transaction do NOT require authorization.
93 InclusiveBankingSuite Product
Lending Guide
Customer Details On entering the Credit Account, the system populates this field with the
Customer number
Account Balance On entering the Credit Account, the system displays the Cleared or
Available Balance on the Account
Signing instructions In the event of signing instructions being captured for the account, the
flag “Y” displays here
Recovery Account Enter the Contingent Account number in this field. The system checks
that the account is linked to a written off loan and displays an error if a
not. The system uses this account to pass the secondary entry between
the customer contingency account and contingent control account. See
note below for further details.
Credit Value Date Enter the value date or select from the pop up calendar. This defines
the date when the entry is to be given value for interest purposes.
Credit Their Ref Enter the transaction reference as will be recorded on the credit
account statement.
Total Credit Amount The system displays the Total Credit Amount, but only after the record
has been authorised.
Credit Account The system display the credit account to be credited by the primary FT
as parameterized in WOF Loan Parameters table. See Note below on
the Primary and Secondary FT entries.
Debit Information The system displays the details of the debit account customer, but only
Customer Details after the record has been authorised.
Debit Account The system populates the cash account number of the teller that is
processing the transaction but only after the deposit currency is
entered.
Account Type The system display the debit account type, but only after the record has
been authorised.
Debit Amount Enter the amount being deposited to the Written Off Account.
Note. The system check against overpayments. If the amount
deposited is more than the balance on the account, an error will be
displayed.
Dr Value Date The system populates the value date with the current system date.
Debit their Ref Enter the transactions reference as will be recorded on the debit
account statement
94 InclusiveBankingSuite Product
Lending Guide
Profit Center Enter the code, you may select this from the look up table. This table is
maintained in …>>System Parameters >>General >>Account officer
Total Debit Amount The system displays the Total Debit Amount, but only after the record
has been authorised.
Customer Details On entering the Credit Account, the system populates this field with the
Customer number
Recovery Account On entering the Credit Account, the system displays the Cleared or
Balance Available Balance on the Account
Signing instructions In the event of signing instructions being captured for the account, the
flag “Y” displays here
95 InclusiveBankingSuite Product
Lending Guide
Recovery Account Enter the Contingent Account number in this field. The system checks
that the account is linked to a written off loan and displays an error if a
not. The system uses this account to pass the secondary entry between
the customer contingency account and contingent control account. See
note below for further details.
Credit Value Date Enter the value date or select from the pop up calendar. This defines
the date when the entry is to be given value for interest purposes.
Credit Their Ref Enter the transaction reference as will be recorded on the credit
account statement.
Total Credit Amount The system displays the Total Credit Amount, but only after the record
has been authorised.
Credit Account The system display the credit account to be credited by the primary FT
as parameterized in WOF Loan Parameters table. See Note below on
the Primary and Secondary FT entries.
Debit Information The system displays the details of the debit account customer, but only
Customer Details after the record has been authorised.
Debit Account The Nostro Account Number is populated in this no input field
Account Type The system display the debit account type, but only after the record has
been authorised.
Debit Amount Enter the amount being deposited to the Written Off Account.
Note. The system check against overpayments. If the amount
deposited is more than the balance on the account, an error will be
displayed.
Dr Value Date The system populates the value date with the current system date.
Debit their Ref Enter the transactions reference as will be recorded on the debit
account statement
Profit Center Enter the code, you may select this from the look up table. This table is
maintained in …System Parameters >>General >>Account officer
Total Debit Amount The system displays the Total Debit Amount, but only after the record
has been authorised.
Drawer Account No Enter the account number as recorded on the cheque form
Drawer Branch Code Enter the branch (sort) code as recorded on the cheque form
96 InclusiveBankingSuite Product
Lending Guide
Reversal procedure
1. Select the Reversal of transaction to written off Loan menu option
2. Enter the FT ID of the transaction to be reversed as shown below
97 InclusiveBankingSuite Product
Lending Guide
5. To restore the account from history, select Account history restore on the menu, enter the account
to be restored and hit enter. Under More Actions, select History restore and commit the record.
6. Upon authorization, the Account is restored back to the live file for reversal entries to be posted.
Access
Click on the view icon to view the recovery account statement with the transactional details of the
recovery progress made.
98 InclusiveBankingSuite Product
Lending Guide
Access
All in One RBHP>>Loans AA>> Arrears/ Provisioning>> WOF Loan Customers with Cr Balances
Note: The system tracks all user initiated activates in WOF Loans Customers’ accounts and generates an
override message alerting the user of the same.
99 InclusiveBankingSuite Product
Lending Guide
Notes
Use this page to record your own notes.