Professional Documents
Culture Documents
Mlink Type Spproval S6401
Mlink Type Spproval S6401
Notice: This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid.
The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed.
If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of Det Norske Veritas, then Det Norske Veritas shall pay compensation to such person for his proved direct loss or damage. However, the
compensation shall not exceed an amount equal to ten times the fee charged for the service in question, provided that the maximum compensation shall never exceed USD 2 million.In this provision “Det Norske Veritas” shall mean the Foundation
Det Norske Veritas as well as all its subsidiaries, directors, officers, employees, agents and any other acting on behalf of Det Norske Veritas.
DET NORSKE VERITAS AS · VERITASVEIEN 1, 1322 HØVIK, NORWAY · TEL: (+47) 67 57 99 00 · FAX: (+47) 67 57 99 11
Form No.: 20.90a Issue: January 98 Page 1 of 5
Cert. No.: S-6401
File No.: 911.53
NPS ID No.: 262.1-010705-1
DNV Project No.: EP031729
Responsibility
The Holder of Certificate, The Crosby Group LLC, takes responsibility that both design and
production at place of manufacture are in compliance with the Rules, Standards and/or
Regulations listed on page 1 of this Type Approval Certificate.
Product description
Grade 8 Master Links type A344 and Master Link Assemblies type A347 for use with Lifting
sets for Offshore Containers certified to DNV Standard for Certification No. 2.7-1 “Offshore
Containers”.
Detailed product information and range of certified products covered by this Type Approval are
listed in Appendix 1 of this Type Approval Certificate.
Reference Standards
Application/Limitation
For application of links the minimum working load limit (WLL) shall be decided according to
the strength requirements for lifting sets on offshore containers as given in DNV 2.7-1 Offshore
Containers, Chapter 8.
The manufacturer shall issue product certificates according to Sec. 8.5 in DNV 2.7-1, using the
certificate form listed below. This certificate form is only to be used for links certified according
to this Type Approval.
DET NORSKE VERITAS AS · VERITASVEIEN 1, 1322 HØVIK, NORWAY · TEL: (+47) 67 57 99 00 · FAX: (+47) 67 57 99 11
Form No.: 20.90a Issue: January 98 Page 2 of 5
Cert. No.: S-6401
File No.: 911.53
NPS ID No.: 262.1-010705-1
DNV Project No.: EP031729
Prototype Testing
Type Testing was performed in accordance with Standard for Certification No. 2.7-1 and EN
1677-4 "Components for slings Safety - Part 4; Links, Grade 8”.
Marking of product
In order to maintain the validity of the type approval, certificate retention surveys are to be
carried out according to DNV 2.7-1. Intervals are not to exceed 6 months.
END OF CERTIFICATE
Appendix 1
Product description and details
Welded master links:
Type Dia. Size designation WLL MPF Min. BF
[mm] [t] [t] [t]
344 12 12 x 60 x 120 1.6 4.0 6.4
DET NORSKE VERITAS AS · VERITASVEIEN 1, 1322 HØVIK, NORWAY · TEL: (+47) 67 57 99 00 · FAX: (+47) 67 57 99 11
Form No.: 20.90a Issue: January 98 Page 3 of 5
Cert. No.: S-6401
File No.: 911.53
NPS ID No.: 262.1-010705-1
DNV Project No.: EP031729
344 13 13 x 60 x 120 2.5 6.35 10.0
344 17 17 x 90 x 160 4.1 10.3 16.4
344 19 19 x 90 x 160 6.7 16.8 26.8
344 20 20 x 80 x 150 6.7 16.8 26.8
344 22 22 x 90 x 170 8.5 21.3 34.0
344 22 22 x 100 x 180 8.5 21.3 34.0
344 22 22 x 145 x 275 6.3 15.8 25.2
344 25 25 x 115 x 210 11.5 28.8 46.0
344 25 25 x 100 x 190 11.5 28.8 46.0
344 25 25 x 145 x 275 8.9 22.3 35.6
344 28 28 x 110 x 210 12.9 32.3 51.6
344 28 28 x 145 x 275 13.0 32.5 52.0
344 31 31 x 145 x 275 17.0 42.5 68.0
344 32 32 x 140 x 270 17.0 42.5 68.0
344 36 36 x 155 x 285 24.0 60.0 96.0
344 38 38 x 140 x 270 31.5 78.8 126.0
344 40 40 x 160 x 300 28.1 70.3 112.4
344 45 45 x 140 x 250 32.0 80.0 128.0
344 45 45 x 170 x 320 38.3 95.8 153.2
344 45 45 x 180 x 340 38.3 95.8 153.2
344 50 50 x 200 x 380 45.0 112.5 180.0
344 51 51 x 215 x 390 45.0 112.5 180.0
344 57 57 x 203 x 406 65.3 163.3 261.2
DET NORSKE VERITAS AS · VERITASVEIEN 1, 1322 HØVIK, NORWAY · TEL: (+47) 67 57 99 00 · FAX: (+47) 67 57 99 11
Form No.: 20.90a Issue: January 98 Page 4 of 5
Cert. No.: S-6401
File No.: 911.53
NPS ID No.: 262.1-010705-1
DNV Project No.: EP031729
347 22 17 8.5 21.3 34.0
347 22 20 8.5 21.3 34.0
347 25 19 8.9 22.3 35.6
347 25 20 10.7 26.8 42.8
347 28 22(c) 12.9 32.3 51.6
347 28 22(d) 14.5 36.3 58.0
347 31 25 17.0 42.5 68.0
347 32 25 17.0 42.5 68.0
347 36 28(e) 23.6 59.0 94.4
347 38 32 28.1 70.3 112.4
347 40 31 28.1 70.3 112.4
347 45 36 38.3 95.8 153.2
347 45 38 38.3 95.8 153.2
347 50 38 45.0 112.5 180.0
347 51 45 45.0 112.5 180.0
347 57 50 67.0 167.5 268.0
Notes:
(a)
Assembled with Quad Link size designation 12mm x 45mm x 85mm.
(b)
Assembled with Quad Link size designation 16mm x 60mm x 120mm.
(c)
Assembled with Quad Link size designation 22mm x 90mm x 170mm.
(d)
Assembled with Quad Link size designation 22mm x 100mm x 180mm.
(e)
Assembled with Quad Link size designation 28mm x 100mm x 190mm.
END OF APPENDIX 1
DET NORSKE VERITAS AS · VERITASVEIEN 1, 1322 HØVIK, NORWAY · TEL: (+47) 67 57 99 00 · FAX: (+47) 67 57 99 11
Form No.: 20.90a Issue: January 98 Page 5 of 5