Professional Documents
Culture Documents
Nitoflor Conductive UAE
Nitoflor Conductive UAE
Nitoflor Conductive UAE
Fosroc offers a comprehensive technical support service to Nitoflor Conductive provides excellent resistance to a wide
specifiers, end users and contractors. It is also able to offer range of industrial chemicals.
on-site technical assistance, an AutoCAD facility and dedi-
cated specification assistance in locations all over the world. Design Criteria
Nitoflor Conductive should be installed by specialist applica- All products above have a shelf life of 12 months if kept in a
tors who must follow the proceedures laid down in the Meth- dry store in their original unopened packages.
od Statement. Please contact your local Fosroc representa-
Store in cool, dry conditions in original unopened packs. If
tive to obtain the Method Statement for correct application of
stored at high temperature and/or high humidity conditions,
Nitoflor Conductive.
the shelf life will be reduced.
Limitations
Precautions
- Application should not commence if the temperature of
Health and safety
the substrate is below 10°C.
Nitoflor Conductive, Nitoflor Conductive undercoat, Nitoprime
- Nitoflor Conductive should not be used on floors known
31 and Fosroc Solvent 102 should not come in contact with
to suffer from rising damp or have a relative humidity
skind and eyes, or be swallowed. Ensure adequate ven-
greater than 75% when measured in accrdance with BS
tiallation and avoid inhalation of vapours. Some people are
8203:87, appendix A or by a Vaisala thermohygrometer
sensitive to resins, hardeners and solvents. Wear suitable
type 131.
protective clothing, gloves and eye protection. If working in
- Ensure adequate cover is taken to avoid exposing the confined areas, suitable respiratory protective equipment
material to a “wind tunnel” effect. must be used. The use of a barrier cream provide addtional
skin protection. In case of contact with skin, rinse with plenty
- Nitoflor Conductive shoud not be applied to asphalt,
of clean water, then cleanse with soap and water. Do not use
unmodified sand/cement screeds, PVC tiles or vinyl.
solvent. In case of contact with eyes, rinse immediately with
plenty of clean water and seek medical advice. If swallowed
Estimating
seek medical attention immediately - Do not induce vomit-
Supply ting.
Nitoflor Conductive : 15 litre
Fire
Nitoflor Conductive U/C : 4.5 litre
Nitoprime 31 : 1 & 4 lt can Nitoflor Conductive base component, Nitoflor Conductive
Fosroc Solvent 102 : 5 litre pails undercoat and Nitoprime 31 are non-flammable.
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the Supply of
Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the user’s responsibility to obtain the latest version.
Head Office
telephone: (+9714) 2039699 fax: (+9714) 2859649 email: agf@fosroc.com
Al Gurg Fosroc LLC
Regional offices
Post Box 657, Dubai Abu Dhabi, Al Gurg Fosroc telephone: 673 1779 fax: 673 1449 email: abudhabi@fosroc.com
Bahrain, YBA Kanoo telephone: 17738200 fax: 17732828 email: bahrain@fosroc.com
United Arab Emirates Kuwait, Boodai telephone: 4817618 fax: 4832124 email: kuwait@fosroc.com
Oman, Al Amana telephone: 24815080 fax: 24817554 email: oman@fosroc.com
www.fosroc.com Qatar, Tadmur telephone: 4432365 fax: 4419517 email: qatar@fosroc.com
UAE/0443/12/C