Professional Documents
Culture Documents
Localizacion y Solucion de Problemas
Localizacion y Solucion de Problemas
Bienvenido: cr080x0106369x01
Producto: TRACK-TYPE TRACTOR
Modelo: D6R II TRACK-TYPE TRACTOR AAX00889
Configuración: D6R SERIES II Track-Type Tractor XL Differential Steering
AAX00001-UP (MACHINE) POWERED BY C-9 Engine
i06552547
Probable Causes
Injector sleeve or injector sleeve seal
Recommended Actions
Personal injury can result from hot coolant, steam and alkali.
Remove filler cap slowly to relieve pressure only when engine is stopped
and radiator cap is cool enough to touch with your bare hand.
Table 1
Troubleshooting Test Steps Values Results
1. Check the Injector Sleeves and the Injector Injector Result: The injector
Sleeve Seals Sleeves and sleeves and the
the Injector injector sleeve seals
A. Remove the valve mechanism covers. Sleeve are OK.
Seals
B. Remove the fuel injectors from the cylinder head. Return the unit to
Refer to the Disassembly and Assembly manual for service.
details.
Result: The injector
C. Pressurize the cooling system in order to identify sleeves and the
the injector sleeve that is leaking. Closely inspect injector sleeve seals
the sealing joint around the top of the injector are NOT OK.
sleeve. Small amounts of coolant will be dripping
from the injector sleeve that is leaking. Repair: Replace the
injector sleeves and
Note: Do not allow the pressure on the cooling injector sleeve seals.
system to exceed 103 kPa (15 psi) during the test.
Damage to the cooling system may result from
applying excessive pressure.
Copyright 1993 - 2018 Caterpillar Inc. Sun Jan 28 2018 12:04:59 GMT-0500 (Hora est. Pacífico, Sudamérica)
Todos los derechos reservados.
cr080x0106369x01
Red privada para licenciados del SIS.