Professional Documents
Culture Documents
BSC6900 UMTS V900R021C10 Performance Counter List
BSC6900 UMTS V900R021C10 Performance Counter List
V900R021C10
Performance Counter List
Issue 01
Date 1/11/2019
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the commercial contract made between Huawei and the customer. A
partial products, services and features described in this document may not be within the purchased scope or the usage scope. Unles
otherwise agreed by the contract, all statements, information, and recommendations in this document are provided "AS IS" without
warranties, guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the preparation of this document
ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty
kind, express or implied.
y the commercial contract made between Huawei and the customer. All or
ent may not be within the purchased scope or the usage scope. Unless
nd recommendations in this document are provided "AS IS" without
xpress or implied.
otice. Every effort has been made in the preparation of this document to
n, and recommendations in this document do not constitute a warranty of any
Purpose
This document describes the northbound interface (NBI) counters and performance objects.
Version
The corresponding product versions of this document are as follows:
•NE Type: BSC6900UMTS
•Match Version: OSS_BSC6900UMTS_MATCH_ENG_V300R019C10
•NE Version: BSC6900-UOV9R21C10ID0050
•IDBegin-IDEnd: 67108864-83886079;1275068416-1291845631
Measured Feature
•Measurement Modes: By all counters (NEs report the measurement results of all counters in a default m
•Default Measurement Period: 30min
•Default Counter Name: Dot Divided Mode
Intended Audience
This document is intended for:
• Network planners
• Field engineers
• System engineers
• Network operators
Organization
The following describes the attributes of counters and performance objects:
Tab Page Attribute
FunctionSet ID
FunctionSet Name
FunctionSubSet ID
FunctionSubSet Name
Supported Period(minutes)
ObjectType ID
Object Name
Counter ID
Counter Name
Counter Description
Counter Unit
Counter Type
Counter Precision
Counters
Formula
Visible
Default Measured(Yes/No)
Introduced in Version
NE
ObjectType ID
EnumID
ElementValue
ENUM Objects
ElementName
ElementDescription
unters and performance objects.
e as follows:
MATCH_ENG_V300R019C10
275068416-1291845631
ance objects:
Description
ID of the function set (also called measurement set)
Name of the function set (also called measurement set)
ID of the function subset (also called measurement unit)
Name of the function subset (also called measurement unit)
Measurement periods supported by a Network Element (NE)
ID of the performance measurement object corresponding to a function subset
Name of the performance measurement object corresponding to the function
subset
ID of the counter
Name of the counter which is defined based on the dot divided mode. It is
composed of a string of uppercase letters, lowercase letters, and dots.
A phrase that provides a simple description about a counter. It is composed of
some words.
Unit of the counter
Value type of the measurement result. For example, UINT,4 indicates that the
value is of the unsigned int type and has four bytes, and Float,8 indicates
that the value is of the float type and has eight bytes.
Precision of the measurement result.
This attribute is valid for measurement results of the string type and indicates
the maximum number of characters that can be contained in a measurement
result.
This attribute is also valid for measurement results of the floating-point type if
measurement results are exported on the basis of measurement units.
For the floating-point measurement results, it indicates the last decimal
places. If the last decimal place is zero or the last decimal places are zeros,
these zeros are not displayed in the exported northbound files. Take the
counter precision of 3 as an example:
If the measurement result of a counter is 123.239, it is displayed as 123.239 in
the exported file.
If the measurement result of a counter is 123.100, it is displayed as 123.1 in
the exported file.
If the measurement result of a counter is 123.110, it is displayed as 123.11 in
the exported file.
If the measurement result of a counter is 123.000, it is displayed as 123 in the
exported file.
The way to aggregate the counter results from a short period to a long period
SUM: sum
AVG: average value
MAX: maximum value
MIN: minimum value
curr:the last period value(just for LRAT)
None: not support the aggregation of the counter results from a short period to
a long period
The way to aggregate the counter results from multiple performance objects
SUM: sum
AVG: average value
MAX: maximum value
MIN: minimum value
None: not support the aggregation of the counter results from multiple
performance objects
If a formula is provided, the counter is calculated by other counters through
the formula. The formula is only used for statistical results.
Whether the counter is visible on the U2000/U2020 Graphic User Interface
The value of 1 indicates that the counter is visible on the U2000/U2020 GUI.
Visible counters are meaningful for customer applications such as network
optimization and troubleshooting. Visible counters are described in the
Performance Counter Reference and their change information is provided in
the Release Notes.
The value of 0 indicates that the counter is invisible on the U2000/U2020 GUI.
Invisible counters are internal sampling points used for calculating the visible
counters inside the U2000/U2020. The calculation relationship is shown in the
column of Formula.
Both visible counters and invisible counters are visible on the Northbound
Interface.
YES indicates that this counter is measured by default.
NO indicates that certain settings on the U2000/U2020 are needed before this
counter is measured.
Introduced in Version of a counter,the value example:
Controller:Earlier than BSC6900 V900R011(Use this version for the version
that earlier than the BSC6900 V900R011),BSC6900 V900R016C00.
BTS: BTS3900: V100R008C00
BTS3900 LTE: version earlier than V100R003C00(Use this version for the
version that earlier than the V100R003C00)
PeerIP LEN=[1,10],VALIDCHAR=[10,0123456789]
82865722
82865725
LEN=[1,32],VALI 82865736
82865738
82865653
82865744
82865653
67108972
67108972
82865690
67108972
67108965
67108965
67108972
ElementDescriptio
EnumID ElementValue ElementName
n
67108864 0 DSP0
67108864 1 DSP1
67108864 2 DSP2
67108864 3 DSP3
67108864 11 DSP11
67108864 12 DSP12
67108864 13 DSP13
67108864 14 DSP14
67108864 15 DSP15
67108865 0 SSN0
67108865 1 SSN1
67108865 2 SSN2
67108865 3 SSN3
67108866 0 UNKNOWN SCCP
67108866 1 RANAP SCCP
67108866 2 RNSAP SCCP
67108866 142 RANAP SCCP
67108866 143 RNSAP SCCP
67108867 1 SSN1
67108867 2 SSN2
67108868 0 CPU0
67108868 1 CPU1
67108869 0 QID0
67108869 1 QID1
67108869 2 QID2
67108869 3 QID3
67108869 4 QID4
67108869 5 QID5
67108870 0 QUEUENO0
67108870 1 QUEUENO1
67108870 2 QUEUENO2
67108870 3 QUEUENO3
67108870 4 QUEUENO4
67108871 0 BE
67108871 1 AF1
67108871 2 AF2
67108871 3 AF3
67108871 4 AF4
67108871 5 EF
67108872 0 QOS1
67108872 1 QOS2
67108872 2 QOS3
67108872 3 QOS4
67108872 4 QOS5
67108872 5 QOS6
67108873 0 QUEUE0
67108873 1 QUEUE1
67108873 2 QUEUE2
67108873 3 QUEUE3
67108873 4 QUEUE4
67108873 5 QUEUE5
67108874 0 QUEUE0
67108874 1 QUEUE1
67108874 2 QUEUE2
67108874 3 QUEUE3
67108874 4 QUEUE4
67108874 5 QUEUE5
67108875 0 QUEUE0
67108875 1 QUEUE1
67108875 2 QUEUE2
67108875 3 QUEUE3
67108875 4 QUEUE4
67108875 5 QUEUE5
67108876 0 QUEUE0
67108876 1 QUEUE1
67108876 2 QUEUE2
67108876 3 QUEUE3
67108876 4 QUEUE4
67108876 5 QUEUE5
67108877 0 IPPM_PHB_BE
67108877 1 IPPM_PHB_AF11
67108877 2 IPPM_PHB_AF12
67108877 3 IPPM_PHB_AF13
67108877 4 IPPM_PHB_AF21
67108877 5 IPPM_PHB_AF22
67108877 6 IPPM_PHB_AF23
67108877 7 IPPM_PHB_AF31
67108877 8 IPPM_PHB_AF32
67108877 9 IPPM_PHB_AF33
67108877 10 IPPM_PHB_AF41
67108877 11 IPPM_PHB_AF42
67108877 12 IPPM_PHB_AF43
67108877 13 IPPM_PHB_EF
67108877 14 IPPM_PHB_CS1
67108877 15 IPPM_PHB_CS2
67108877 16 IPPM_PHB_CS3
67108877 17 IPPM_PHB_CS4
67108877 18 IPPM_PHB_CS5
67108877 19 IPPM_PHB_CS6
67108877 20 IPPM_PHB_CS7
67108878 0 QID0
67108878 1 QID1
67108878 2 QID2
67108878 3 QID3
67108878 4 QID4
67108878 5 QID5
67108878 6 QID6
67108878 7 QID7
67108879 0 QOS1
67108879 1 QOS2
67108879 2 QOS3
67108879 3 QOS4
67108879 4 QOS5
67108879 5 QOS6
67108879 6 QOS7
67108879 7 QOS8
67108879 8 QOS9
67108879 9 QOS10
67108879 10 QOS11
67108879 11 QOS12
67108879 12 QOS13
67108879 13 QOS14
The description of U2000/U2020 Performance Object Name tab page is:
U2000/U2020 Performance ObjectName[level n]
Type Tag Value
STRING,LEN=[1,13],VA
LIDCHAR=[10,1234567
890],
SELECTABLESTRING
INPUT Called Number S=[1,ALL]
STRING,LEN=[9,17],VA
LIDCHAR=[12,1234567
890@.],
SELECTABLESTRING
INPUT Local IP S=[1,<NULL>]
83886586.ElementNam
ENUM Connection Type e
LEN=[1,16],VALIDCHA
INTERNAL DEST Cell ID R=[10,0123456789]
Object Name tab page is:
Description