Professional Documents
Culture Documents
Lubecut 2300 Ea
Lubecut 2300 Ea
Description
• Blue colour
• Water soluble Semi Synthetic
• Low oil content
• Bio-stable
Application
• Grinding 3%-5%
• Turning, Milling, Boring 5%
• Tapping, Drilling 5%-7% (Post Recommendation)
Material Compatibility
• Cast Iron
• Mild Steel
• Forged Steel
• Select grades of Stainless Steel
• Select grades of Aluminium
Water Compatibility
• Typical 50 to 500 ppm hardness (Calcium Carbonate)
• Low foam in low hardness water
• Suitable for high pressure CNC, VMC and grinding machines
Advantages
• Long sump life
• No bad odour even after long machine closures
• Excellent cleaning property and better visibility
• Biocide free and Bio-stable
PRODUCT MIXING
PTCPL advise the use of automated mixing systems. Mixing manually, always add the
concentrate to the water with maximum agitation, if water is added to the concentrate, the
emulsions may prove unstable. Avoid mixing with very cold concentrate or water. Check
emulsion strength using a calibrated refractometer. Details of where to purchase equipment
and how to use it are available from the PTCPL Technical Department.
PRODUCT MANAGEMENT
The working concentration should be carefully controlled and monitored on a daily basis as
higher and lower working concentrations have health and safety implications. Machines
should be cleaned out regularly. Fluid and particulate contaminants should be kept to a
minimum. This is important especially in terms of bacterial control and is in line with the
latest advice from government and professional sources. Detailed reference sources are
given in the MSDS.