Professional Documents
Culture Documents
Pax S90 Emv Download PDF
Pax S90 Emv Download PDF
COM
RACO: M2M.T-MOBILE.COM
Telefonica: ITL.MOVISTAR.ES
6. Press Enter past User name/Password
7. Enter Remote IP
AT&T OR RACO: 10.224.2.247
PAX S90 WCDMA/3G/CDMA Verizon: 10.246.2.247
Telefonica: 10.238.2.247
Wireless EMV Download Instructions
8. Enter Port: 8001
An OS Update is required for all PAX S90 CDMA, WCDMA and 3G terminals in order to
be reprogrammed for the EMV file. Once this OS update is completed, the S90 will 9. Press Enter past PIN code
behave like an S80 and auto-download from BroadPOS. NOTE: PAX terminals must be 10. Select Package length 8KB
boarded on GLOBAL EAST to support EMV transactions at this time. Files can be
requested as MSR only and boarded on other Front Ends if desired 11. Select MIP
STEP 1. OS UPDATE & FILE LOAD 12. Enter the Terminal ID:
13. TID: 90909090
1. Power device off.
14. Press Enter.
2. While powering device on, continue pressing the MENU key
until you see an option for - Remote Download. 15. Download should begin- when it completes - "Completed!
Please Reboot" should display.
Note: if there is no option for Remote Download, select
16. Hold the power button down to power off the device, then press
Protims.
it again to power it back on. The terminal should auto-DL from
3. Select New Download BroadPOS (just like an S80)-. You will know your DL was
4. Select WCDMA or CDMA depending on the device type successful when the display changes from "Input Card" to "Input
5. Enter APN if applicable, press Enter. Amount"
AT&T: ALLEN1.APRIVA.COM
CONTACT PHONE NUMBER 1-877-564-5656
RACO: M2M.T-MOBILE.COM
24/7 TECHNICAL SUPPORT - INCLUDING HOLIDAYS
Telefonica: ITL.MOVISTAR.ES CUSTOMER SERVICE -FOR SUPPLIES, BATCH & BILLING INFORMATION
6. Press Enter past User name/Password MONDAY - FRIDAY 8:00 AM - 6:00 PM EST
AT&T OR RACO: 10.224.2.247
Verizon: 10.246.2.247
Telefonica: 10.238.2.247
7. Enter Port: 8001
8. Press Enter past PIN code
9. Select Package length 8KB
10. Select MIP
11. Enter the Terminal ID:
CDMA, TID: 90909091
WCDMA & 3G TID:
90909040 if it says S90 WCDMA on the bottom right of
the screen
90909041 if it says S90 3G on the bottom right of the
screen
12. Press Enter.
13. Download should begin- when it completes - "Completed!
Please Reboot" should display.
14. Hold the power button down to power off the device, then press
it again to power it back on. The terminal should auto-DL from
BroadPOS (just like an S80)- If this doesn't occur, follow the
steps below. You will know your DL was sucessful when the
display changes from "Input Card" to "Input Amount"
15. Power device off.
16. While powering device on, continue pressing the MENU key
until you see an option for - Remote Download.
OPTIONAL: FULL CLEAR/FACTORY RESET