Professional Documents
Culture Documents
LMTB Cable PDF
LMTB Cable PDF
LMTB Cable PDF
INSTRUCTION 1 (4)
Prepared (Subject resp) No.
How to build your own LMT Cable for DUS 31 and DUS 41
Abstract
The DUS 31 and DUS 41 have a combined Local maintenance terminal (LMT A
and LMT B) port in the front as opposed to DUL 20 that carries separate ports.
Without an adapter, it is only possible to access the LMT B port.
Application
This adapter is useful when accessing both the LMT A and LMT B port of the
DUS. LMT A will be used during scratch load scenarios where an IP address
needs to be defined in the eNodeB. This splitter adapter is used as a temporary
cable to get the node up and running.
Ericsson Internal
INSTRUCTION 2 (4)
Prepared (Subject resp) No.
The Digital Unit (DUL 20) in an RBS has two interfaces for a Local Maintenance
Terminal (LMT):
New Generation of Digital Units for the RBS6000 Family are the DUS 31 and
DUS 41; and they only have one LTM port, In order to connect to both LMTA and
LMTB is necessary to use the Ericsson LMT Splitter Cable LTY 151 1018/1.
Because this adapter is not included in the RBS6000 and must be ordered
separately for the DUS, sometimes will not be available and it’s necessary to find
a way to work around.
For example the most common straight-through Ethernet cable is the T-568B
Ericsson Internal
INSTRUCTION 4 (4)
Prepared (Subject resp) No.