Professional Documents
Culture Documents
LECTROTECH
LECTROTECH
EARTH TAIL CLAMP
Material:Die cast brass
Fits conductors sizes:50mm2; 70mm2 & 10mm dia.
Code: Q-105
PG CLAMP
DUMPY INSULATORS
Material: LV insulation, IEC comparative tracking index 950 V, colour black
LINE TAPS
Standard sizes available, 16 mm to 240mm .
EARTH BRAID - for earth bonding of metal gates, doors, fences etc
Available in Red or Tinned copper.
Material: HC copper
Length: L mm 100,150,200,250 & 300
CALCULATES:
- resistance "with" and "with-out" E-Mix
- number of bags of E-Mix required
USER INSTRUCTIONS
Mix the cement supplied in the bag with the E-Mix compound, then mix with water to give a slurry consistency
Drilled hole-(70-100mm dia): Trench-(250-300mm wide):
Fill hole to approx. 50% of depth with E-Mix. Add half the depth (25-30mm) of E-Mix to trench
Place earth rod in centre of hole. and allow to set so that earth conductor is supported.
Fill the rest of the hole with E-Mix. Place earth conductor on top of E-Mix in trench and
Agitate rod to remove air-pockets. add a further 25-30mm of E-Mix.
Allow E-Mix to semi-harden (24 hours depending
on temperature) before backfilling trench.
Compact backfill 48 hours later.
EARTH BAR
Manufactured from HC
red copper bar, mounted
on dumpy insulators
(LV) with
eart h connection holes
drilled.
Also available in Tinned
copper.
EARTH BAR WITH TEST LINK
Manufactured from HC
red copper bar, mounted
on dumpy insulators
(LV) with
earth connection holes
drilled.
Also available in
Tinned copper.
EARTH BAR - SPECIALS
Manufactured from HC red copper bar, or tinned copper to customer
drawings.
EARTH PIT (Cast Iron)
CABLE MARKERS
Used to bond to rebar for lightning air termination on column rebar, concrete columns, tunnels etc.
Can be LECTROWELDed (exothermically) to rebar. Can also be ‘U’-bolted on site.
Copper alloy face with tapped holes.
70 mm green/yellow insulated cable 2500 mm long, factory welded to earth plate face.
The Earth Plates can be manufactured with longer tails as needed.
EARTH PLATE EARTH PLATE
EARTH PLATE - V
Used to bond to rebar for lightning air termination on column rebar, concrete columns, tunnels etc.
Can be LECTROWELDed (exothermically) to rebar.
Can also be ‘U’-bolted on site.
Copper alloy face with tapped holes.
70 mm green/yellow insulated cable 2500 mm long, factory welded to earth plate face.
The Earth Plates can be manufactured with longer tails as needed
BASIC EARTHING - Earth System Considerations
BASIC EARTHING
Extreme case of a poor earth
Note:
Copper conductor connected to earth rods using LECTROWELD.
E-Mix - Conductive earthing compound well distributed in trench according
to specificat