Professional Documents
Culture Documents
Antenna Datasheet PDF
Antenna Datasheet PDF
Antenna Datasheet PDF
Dual Polarization X
Half-power Beam Width 65°
Adjust. Electr. Downtilt 0° – 10°
set by hand or by optional RCU (Remote Control Unit)
XPol Panel 790–960 65° 16.5dBi 0°–10°T
Type No. 80010634V01
Frequency range 790–960
790 – 862 MHz 824 – 894 MHz 880 – 960 MHz
Polarization +45°, –45° +45°, –45 +45°, –45°
Gain (dBi) 16.2 ... 16.4 ... 16.2 16.3 ... 16.6 ... 16.3 16.6 ... 16.8 ... 16.6
Tilt 0° ... 5° ... 10° 0° ... 5° ... 10° 0° ... 5° ... 10°
Horizontal Pattern:
Half-power beam width 69° 68° 65°
Front-to-back ratio (180°±30°) > 24 dB > 25 dB > 25 dB
Cross polar ratio
Maindirection 0° Typically: 20 dB Typically: 20 dB Typically: 20 dB
Sector ±60° > 10 dB > 10 dB > 10 dB
Tracking, Avg. 0.5 dB
Squint ±1.5°
Vertical Pattern:
Half-power beam width 10° 9.9° 9.7°
Electrical tilt 0° – 10°, continuously adjustable
Sidelobe suppression for first 0° ... 5° ... 10° T 0° ... 5° ... 10° T 0° ... 5° ... 10° T
sidelobe above main beam 18 ... 18 ... 18 dB 18 ... 18 ... 18 dB 18 ... 18 ... 18 dB
9.7°
dB
dB
Category of
69° H (Heavy)
135° mounting hardware
10° Weight 10.5 kg / 12.5 kg (clamps incl.)
Packing size 2216 x 292 x 192 mm
10 10
Accessories 72
64
9
Weight
Type No. Description Remarks Units per antenna
approx.
1934
1964
2004
Material: Reflector screen: Weather-proof aluminum.
Fiberglass radome: The grey fiberglass radomes of these antennas
are very stable and extraordinarily stiff. They are resistant to ultraviolet
radiation and can also be painted to match their surroundings.
877
All screws and nuts: Stainless steel.
Grounding: The metal parts of the antenna including the mounting kit and the inner
conductors are DC grounded.
Environmental conditions: Kathrein cellular antennas are designed to operate under the environ-
mental conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the following items:
– Low temperature: –55 °C
– High temperature (dry): +60 °C Adjustement mechanism
with integrated scale
Ice protection: Due to the very sturdy antenna construction and the
protection of the radiating system by the radome, the antenna remains
operational even under icy conditions.
111
99
Environmental tests: Kathrein antennas have passed environmental tests as recommended
in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna
families use identical modules and materials. Extensive tests have been 172
5
performed on typical samples and modules. 259
Bottom view
Please note: As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
Subject to alteration.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and thereby
respects the static mechanical load imposed on an antenna by wind at maximum velocity. Wind loads are
calculated according to DIN 1055-4. Extraordinary operating conditions, such as heavy icing or exceptional
dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna
or even cause it to fall to the ground. These facts must be considered during the site planning process.
936.3816/a
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers
must be obeyed.
Torque MA = G
Torque:
M8 => MA = 20 Nm
M6 => MA = 8 Nm
A B C D E F G H
152 mm 40 mm 40 mm 50 –115 mm 93 mm 18 – 26 mm 20 Nm 125 mm
Washer
Subject to alteration.
936.3816/a
1
2
2
➀ Adjustment wheel with twist-lock ➀ Thread for fixing the protective To set the downtilt angle exactly,
function. cap or the RCU (Remote Control you must look horizontally at the
➁ Downtilt spindle with integrated Unit). scale. The lower edge of the gear-
scale. ➁ Gearwheel for RCU power drive. wheel must be used for alignment.
0° – max.°
max.° – 0°
Remove the protective cap. Set downtilt angle by rotating the Screw on the protective cap again.
adjustment wheel.
For a description of RCU installation please refer to the respective data sheet.
Page 4 of 4 800 10634V01 Internet: www.kathrein.de
KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973