06 Singlepiece+WC+-+P+trap PDF

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

INSTALLATION INSTRUCTIONS FOR

SINGLEPIECE WC P-TRAP

THE INSTALLATION INSTRUCTIONS ARE APPLICABLE FOR

LYS-WHT-38851P SLS-WHT-6851P

LYS-WHT-38851PSM VGS-WHT-81851PN

QNS-WHT-7851P
STEPS FOR INSTAllATION

One pc EWC is fitted with Make the outlet hole on wall as mentioned in
all internal flushing the table. The projection of outlet pipe should
be as per 'B' to enter the p-trap inside outlet.
chanism.

Drill the screw hole area on floor with 5 mm


drill bit & insert the PVC sleeves into the hole.

Placethe EWCsuch that outlet should


enter into the outlet & mark the screw Placethe EWCsuch that outlet shouldenter
fixing hole area on floor with marker pen into the outlet inside wall with outlet rubber
& remove the EWC. adaptor & tight the screw in the hole.

Connect the bottom of ball valve with


connecting pipe to incoming water line.
Putthe PVC cap onfixed screw.

CAUTION
Do not fill cement mortar inside the bottom
It is suggested to fit the seat cover
of ewe otherwise due to expansion of cement,
crack may develop in the closet foot. before installation

You might also like