Professional Documents
Culture Documents
Nitoplate CP - Formerly Known Nitoplate CP Strips
Nitoplate CP - Formerly Known Nitoplate CP Strips
Nitoplate CP - Formerly Known Nitoplate CP Strips
Uses
Nitoplate CP is a system of high-quality carbon fibres, pre-
laminated into dense, unidirectional plates. They are
adhered using Nitoplate CPA30 thixotropic adhesive,
making them ideal for overhead applications on beams and
slabs.
Advantages Description
Improves flexural strength capacity Nitoplate CP is a 0º unidirectional carbon fibre sheet with
High tensile strength and elastic modulus
high tensile strength and high tensile modulus with 68%
volumetric fibre content. It is used with specially developed
Non-intrusive resin ‘Nitoplate CPA30’ and externally applied to concrete or
Corrosion resistance with high life expectancy
masonry. When correctly designed and applied, the
Nitoplate CP system may improve structural load carrying
Rapid installation provides cost savings, rapid return to capacity, flexural strength, and provide resistance to
service and minimal disruption to surrounding works deformation.
Lightweight system reduces requirement for heavy Nitoplate CP is available in Standard tensile modulus (CPS),
supporting equipment and adds negligible additional Medium Tensile Modulus (CPM)
load
Pultrusion process increases density making Fosroc also provides the following materials for structural
strengthening:
strengthening of narrow sections possible
Thixotropic resin adhesive makes overhead working Nitowrap CW: Carbon fabric materials
easier. Nitowrap AW: Aramid fabric materials
Typically low build reducing effects on structural
Nitowrap GW:
Nitorod CR:
Glass fabric materials
Carbon fibre pultruded rods
dimensions and clearance
No pre-fabrication required, can cut to size on site Aramid plates and rods are also available upon request.
Comes in varying strengths and thicknesses Fosroc provides ancillary primers, adhesives and repair
materials.
Page 1 of 3
NITOPLATE CP
(Formerly Known as Nitoplate CP Strips)
Properties
Table 1 : Nitoplate CP –
Product dimensions and physical properties
Tensile
Cross Fibre Tensile Tensile strength at Flexural Ultimate
Product Thickness Width
Sectional Density Modulus Strength break Strength Elongation
Code (mm) (mm)
Area (mm²) (g/cm³) (N/mm²) (N/mm²) ( ẋ N/mm²) (N/mm²) (%)
Nitoplate CPS
212 20 24
512 50 60
612 60 72
812 1.2 80 96 1.5 165,000 >3,000 3,050 1,670 1.7
912 90 108
1012 100 120
1212 120 144
214 20 28
514 50 70
614 60 84
814 80 112
1.4 1.5 165,000 >3,000 3,050 1,670 1.7
914 90 126
1014 100 140
1214 120 168
1514 150 210
Nitoplate CPM
514 50 70
614 60 84
814 80 112
1.4 1.6 >210,000 >2,800 2,900 1,470 1.2
914 90 126
1014 100 140
1214 120 168
Page 2 of 3
NITOPLATE CP
(Formerly Known as Nitoplate CP Strips)
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions
for the Supply of Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the user’s responsibility
to obtain the recent version.
Head Office
Al Gurg Fosroc LLC telephone: (+9714) 2039699 fax: (+9714) 2859649 email: agf@fosroc.com
www.fosroc.com
Kuwait, Boodai telephone: 4817618 fax: 4832124 email: kuwait@fosroc.com
Oman, Al Amana telephone: 24815080 fax: 2481755 email: oman@fosroc.com
UAE/0783/19/E