Professional Documents
Culture Documents
Hanwha Q CELLS Data Sheet QPLUS BFR-G4.2 270-280 2016-07 Rev01 GL PDF
Hanwha Q CELLS Data Sheet QPLUS BFR-G4.2 270-280 2016-07 Rev01 GL PDF
2 270-280
Q.ANTUM SOLAR MODULE
HOT-SPOT PROTECT
(HSP)
1
APT test conditions: Cells at -1500 V
against grounded, with conductive
metal foil covered module surface,
25 °C, 168 h
2
See data sheet on rear for further
THE IDEAL SOLUTION FOR: information.
1000 mm
Frame Black anodised aluminium
Cable with 1000 m m
connectors
Cell 6 × 10 Q.ANTUM solar cells
Junction bo×
8.5 mm
24.5 mm
ELECTRICAL CHARACTERISTICS
POWER CLASS 270 275 280
MINIMUM PERFORMANCE AT STANDARD TEST CONDITIONS, STC1 (POWER TOLERANCE +5 W / -0 W)
Power at MPP 2 PMPP 270 275 280
Short Circuit Current* I SC 9.29 9.35 9.41
Minimum
100
RELATIVE EFFICIENCY
COMPARED TO NOMINAL POWER [%]
Q CELLS
first year. Thereafter max. 0.6 % degra-
EFFICIENCY
95
Industry standard for tiered warranties*
dation per year.
100
At least 92 % of nominal power up to
Relative
10 years.
RELATIVE
90
At least 83 % of nominal power up to 90
25 years.
85
TEMPERATURE COEFFICIENTS
Temperature Coefficient of ISC α [% / K] + 0.04 Temperature Coefficient of VOC β [% / K] − 0.29
Temperature Coefficient of PMPP γ [% / K] − 0.40 Normal Operating Cell Temperature NOCT [°C] 45 Specifications subject to technical changes © Hanwha Q CELLS Q.PLUS BFR-G4.2_2016-07_Rev01_GL
NOTE: Installation instructions must be followed. See the installation and operating manual or contact our technical service department for further information on approved installation
and use of this product.