Professional Documents
Culture Documents
Readme
Readme
============================================================================
NOTICE: PLEASE SAVE YOUR EXISTING CODEPLUG TO AN ARCHIVE FILE. The CPS
programming data will lost after upgrading. It is recommended
that use CPS to save an archive of the radio's codeplug before
the update process. After upgrading, this archive can be used
to recover the CPS programming data of the radio.
(CPS compatibility: R05.16 or newer)
============================================================================
============================================================================
SUPPORTED FEATURES:
Model Super Tanapa (Conv models) ---> Super Tanapa (LS trunking models)
===================================================================================
H65JDC9AA2AN PMUD1983A PMUD2051A
H65JDC9AA2AN PMUD2109A PMUD2051A
H65JDF9AA3AN PMUD1984A PMUD2052A
H65JDF9AA3AN PMUD2115A PMUD2052A
H65JDH9AA4AN PMUD1985A PMUD2053A
H65JDH9AA4AN PMUD2110A PMUD2053A
H65KDC9AA2AN PMUD1857A PMUD2054A
H65KDC9AA2AN PMUD2113A PMUD2054A
H65KDF9AA3AN PMUD1858A PMUD2055A
H65KDF9AA3AN PMUD2116A PMUD2055A
H65KDH9AA4AN PMUD1859A PMUD2056A
H65KDH9AA4AN PMUD2114A PMUD2056A
H65QDC9AA2AN PMUE1972A PMUE2361A
H65QDC9AA1AN PMUE1972A PMUE2361A
H65QDC9AA2AN PMUE2422A ---> PMUE2361A
H65QDF9AA3AN PMUE1973A PMUE2362A
H65QDF9AJ3AN PMUE2097A PMUE2362A
H65QDH9AA4AN PMUE1974A PMUE2363A
H65QDH9AA1AN PMUE1974A PMUE2363A
H65QDH9AA4AN PMUE2423A PMUE2363A
H65RDC9AA2AN PMUE1966A PMUE2364A
H65RDC9AA2AN PMUE2426A PMUE2364A
H65RDF9AA3AN PMUE1967A PMUE2365A
H65RDF9AJ3AN PMUE2100A PMUE2365A
H65RDH9AA4AN PMUE1968A PMUE2366A
H65RDH9AA4AN PMUE2427A PMUE2366A
H65SDC9AA2AN PMUE1978A PMUE2367A
H65SDC9AA2AN PMUE2430A PMUE2367A
H65SDF9AA3AN PMUE1979A PMUE2368A
H65SDF9AA3AN PMUE2434A PMUE2368A
H65SDH9AA4AN PMUE1980A PMUE2369A
H65SDH9AA4AN PMUE2431A PMUE2369A
- Only official radio firmware and codeplug release version and bands.
Firmware in the versions:
R01.00.00, R02.00.00, R02.00.01, R02.00.02, B03.00.00, B03.00.01,
B03.00.02, B03.00.03, R03.00.00, T02.00.03, T02.00.04, T02.00.05,
R03.00.01, T02.00.06, T03.00.01, T03.00.02, R03.00.02, R03.00.03,
T03.00.03, R03.00.04, R03.01.00, R03.01.01, R03.01.02, T03.02.04,
R03.02.05, R03.02.07, T03.02.09, T03.02.10, T03.02.11, T03.02.12,
T03.02.13, B03.03.01, R03.03.02, R03.03.03, R03.04.02, R03.06.00,
R03.06.01, R03.06.02, R03.07.01, R03.07.02, R03.07.03
SUPPORTED MODELs:
============================================================================
WARNING
============================================================================
Ensure the radio updating process is not interrupted. Interruption will cause the
radio not to operate anymore and attempting to update the radio again will NOT
be successful.
Do NOT create a shortcut of the program (e.g. on your desktop), the program might
not be able to find the data files in that case!
Do not remove the programming cable or turn off the radio while the update is
in progress.
In case of failure during the updating, a message box will appear to guide the user
You may not run more than one copy of the program at the same time.
==============================================================================
============================================================================
REQUIRED EQUIPMENT
For the usage of this software the following radio accessories are required:
Connect all the items in the following sequence for a Rib Configuration:
PC com port >>Rib to PC cable (3080369B72), Flash adapter (RLN5583A) & RIB
(RLN4008E)
>> Radio. Ensure the switch on the programming & flashing cable box is in
the 'Normal' position.
============================================================================
============================================================================
(Note: These instructions must be followed in the exact order to work properly):
1. Power on the radio using a fully charged battery or a power supply set to
7.5vdc @ 2 amps.
Start the Firmware Kit from the Start Menu >> Programs >> Motorola Solutions
>> Commercial Series Radio
Firmware Kit >> Portable Firmware Kit R03.07.03 with Codeplug R10.04 >>
Firmware Kit R03.07.03
2. Once the Firmware Kit screen appears, click on the 'PROGRAM' button.
3. After the tool is launched and only on the first attempt of updating, the
flash Baud rate configuration dialog
box will appear. The default baud rate is 19,200. Select 'OK' if you want to
use the default value or you can
select a different baud rate and then click on the 'OK' button.
4. A message box will appear with instructions to put the radio in Bootstrap
mode.
- Turn off the radio.
- Switch the flashing adapter into the 'Flash' mode.
- Turn the radio on and make sure the radio doesn't boot up like normal.
- Select 'OK.'
5. A window will pop up initially saying "Please Wait" then the window will read
"Progress" and give you a
percentage of completion. Information in the window will give indications to
each process of the update.
6. A window will pop up when the updating is complete reading 'Radio Update is
successful.'
7. Click 'OK,' return the flashing switch to the 'Normal' position, and remove
the programming & flashing
cable. Power off and on the radio to complete the process and to get the radio
out of the bootstrap mode.
8. Connect another radio and repeat the process from step 4. Remember, the baud
rate selection is only
configured the first time after starting up the program.
============================================================================
TROUBLESHOOTING
============================================================================
1. Make sure this is an original version of the kit and not copied off another
computer.
2. Make sure another copy is not running on your computer.
1. On RIB setting menu, set 'Echo' for single-wired bootstrap. 'No Echo' is for
dual-wired bootstrap. Professional radios use single-wired bootstrap.
2. On the Comm setting menu, make sure that the port selected is the one to
which the radio is connected.
3. Make sure the radio is on and properly connected to the computer.
If an error is returned immediately after the radio is in bootstrap:
1. Click 'OK' and switch the flash adapter to the 'CPS' or 'Normal' or 'OFF'
position, turn the radio off, then on again, and try again.
==============================================================
==============================================================
Release ELP Conventional-R03.07.03
Previous Release ELP Conventional-R03.07.02