Professional Documents
Culture Documents
TPC-1000H-WMKE TPC - Series - User - Guide - Wall - Mount - 1st - Ed
TPC-1000H-WMKE TPC - Series - User - Guide - Wall - Mount - 1st - Ed
INSTALLATION GUIDE
Assembly Instructions
The TPC-1000H wallmount kit is designed for all TPC series models from 10" to 17". It consists of three metal
pieces secured by 4 x M4 screws. Two sets of screw holes are used to adjust the width to fasten different sizes
of the various TPC models..
• TPC-17xxH series - 406mm • TPC-12xxH series - 308mm
• TPC-15xxH series - 381mm • TPC-10xxH series - 286mm
4-M4x8L
4-M4x8L
Note: The base of the stand has two plastic caps. If you pry off the caps, you can
attach the stand to your desktop by using two screw holes.
114
7 50
40 90.9
4-
Ø5
4 THRU HOLES FOR MOUNTING 200
TPC-1000H-WMKE AT WALL
2. Refer to the directions below for how to secure the TPC to the kit.
TPC-1000H-WMKE