Professional Documents
Culture Documents
Wood Finishings Application Procedures
Wood Finishings Application Procedures
POLYURETHANE
Procedure of application:
1) Wipe clean the surface
2) Sand the surface area using grade # 60 sandpapar
The follow up with #100.
3) Apply SANDING SEALER using brush then let it dry.
4) Sand the surface this time using #240 sand paper after
The sealer has dried up.
5) Repeat 3 & 4 three times.
6) Apply the POLYURETHANE with catalyst solution
Using spray gun.
7) Let the item applied dry enough before moving or
Using. Usually it takes more than 12 hours before
the item is completely dry.
VARNISH FINISH
BEESWAX
LINSEED OIL
2) After using the #1000 sand paper apply the LINSEED OIL on the surface.
sand the surface again with #1000 sand paper after applying the oil while
it is still wet. Continue sanding until the surface gets dried. Repeat the
application 3 times.