Professional Documents
Culture Documents
PD PP SPC4
PD PP SPC4
Perforated ceiling supply diffusers shall be Tuttle & Finish shall be Tuttle & Bailey white (WH) electrocoat
Bailey model PP or APP. Diffusers shall have a steel or finish. The finish shall be an anodic acrylic paint, baked
aluminum perforated face with 3/16” diameter holes on at 315ºF for 30 minutes with a pencil hardness of HB
1/4” staggered centers and no less than 51% free area. to H.
The backpan shall be heavy gauge steel construction
with margin styles and sizes shown per plans. The The manufacturer shall provide published performance
perforated face must be hinged to the back panel to data tested in accordance with ANSI/ASHRAE Standard
provide access for the pattern control adjustment and 70-1991 at isothermal conditions.
also be removable for cleaning.
*Round *Square
Model Neck Neck Module Margin Finish
PP SF - Surface Mount
LT - Lay-in T-Bar
PL - Spline
06 6x6
TG - Tegular
08 8x8
10 10x10
12x12 12x12
12
14x14 16x16
14
20x20 WH - White
16 16x16
24x12 ***ML - Mill
18x18**
24x24 AP - Aluminum Paint
48x24 OW - Off-White
FB - Flat Black
*Must select round or square neck
MP - Match Paint
**18x18 only available in 24x24 module BW - Black Backpan
***Pattern deflectors will be white White Face
Example: PP - 08 - 16x16 - SF - WH
Perforated
Dampers must be ordered separately and will be shipped loose for field installation.
Diffusers
*Round *Square
Model Neck Neck Module Margin Finish