Professional Documents
Culture Documents
Determine The Peak Output Voltage For The Bridge Rectifier in The Figure
Determine The Peak Output Voltage For The Bridge Rectifier in The Figure
Assuming the
practical model, what PIV rating is required for the diodes? The transformer is specified to
have a 12 V rms secondary voltage for the standard 120 V across the primary.
2. Determine the ripple factor for the filtered bridge rectifier with a load as indicated in figure
below.
3. Determine a value of R1 in figure below that will ensure proper turn-on and turn-off of the UJT following
values: ƞ = 0.33,VV = 0.8V, IV = 15mA, IP = 35 µA, and VP = 18V.