Professional Documents
Culture Documents
WoodTech Wood Stains Exterior PDF
WoodTech Wood Stains Exterior PDF
PRODUCT BENEFITS
PRODUCT FEATURES
Range of 6 attractive WoodTech Wood Stains for Exteriors WoodTech Wood Stain Exterior (1044)- 100 ml, 500 ml.
available to add/change the colour.
120
On smooth sanded wooden surface by Spraying 0
1 COAT 45 15
5 - 6 sq.mtr/ltr/coat**
30
MINUTES
**Actual coverage may vary from the quoted coverage due
to factors such as method and condition of application and
surface roughness and porosity.
HOW TO APPLY
PRE PAINTING STEPS PAINT APPLICATION PROCESS
APPLICATION CODE THINNER DILUTION % APPLICATION RECOATING
SANDING: Sand the VISCOSITY PERIOD
wooden surface along STEP 1
the grains using sand FOR EXTERIORS,
paper no. 180, and then APPLY WOODTECH AQUADUR
WOOD PRESERVATIVE
320 or 400. Wipe surface
2 COATS
to clean off loose dust BRUSH/RAGGING
1043 WATER NA 11 - 15 SECS 2 HOURS
particles.
DENT FILLING: If the
surface has dents, apply
WoodTech Filler with
a putty knife over the STEP 1
dented area. WOODTECH AQUADUR WOOD STAIN
FIRST COAT
BRUSH/RAGGING
Note: 1. Application of WoodTech Aquadur Wood Preservative coats can be varied. Give an interval of 20-30 minutes between 5. Surfaces stained with WoodTech Wood Stains Exterior must
is essential only in the case of exterior application. For interior two coats. always be coated with WoodTech Clear Wood Finishes.
wood application, WoodTech Wood Stain Exterior can be 3. Do not sand the stain coat. 6. Recoat period is quoted for 30°C and 75% relative humidity,
applied on wood without application of WoodTech Aquadur 4. For lighter shades, WoodTech Wood Stains Exterior can be these may vary under different conditions.
Wood Preservative diluted with water just before application. Only required shade 7. Give an interval of 30 minutes between coats.
2. Depending on the shade intensity desired, the number of should be diluted at a time. 8. Viscosity as measured through a Ford cup B4 at 30ºC.
Finishes for Wood Surfaces
The final shade will vary on the basis of the color of the veener, no of coats applied and dilution of the wood stains.
ADDITIONAL INFORMATION
TECHNICAL DETAILS
a. Drying time: Dry to Touch: 30 minutes
b. Flash point: Not applicable
c. Stability of thinned paint: Not applicable
d. Shelf Life: 18 months from date of
manufacture in original tightly closed container
away from direct sunlight and extensive heat.
Version No. VN28/02/2018
Version No. VN28/02/2018. Please note that this datasheet supersedes all previous versions
For Feedback/complaints, write to Marketing Manager Services,Asian Paints Limited, 6A, Shantinagar, Santacruz (E), Mumbai 400 055, India