Professional Documents
Culture Documents
Egger Process Pumps
Egger Process Pumps
Egger Process Pumps
Series E / EO / EOS
d us try:
r o c e ss In
fo r the P in du stry
s ulose
Pump c e ll
ap e r and
g i n d ustry
P e ssin
p ro c
Fibre d ustry
ica l in
Chem l in d ustry
o c h e mica d ustry
Pe tr in
o c e s sing
pr
Sugar fflu enty
trial e
I nd u s
l p ro jects
o n m enta
Envi r
EGGER Solids handling pumps - Series E/EO/EOS
Description
E
High efficiency and an excellent
suction performance are the result EO
of extensive research on our test EOS
beds, including the paper stock
test rig, where the pumps were
subjected to tests under simulated
working conditions. (E.g. proving
that there is little loss in perfor-
mance between paper stock and
clean water curves.)
Series E/EO/EOS
Arrangement E has pump casing
fitted with wear ring on the suction Exterior impeller clearance
side. adjustment Types EO, EOS
The special EGGER impellers which During tha past 50 years, EGGER has The EGGER centrifugal pump
we use today are a logical develop- developed into an internationally designs E/EO/EOS with shrouded
ment of the original Egger impeller, known manufacturer of special and semi-open impellers represent
Patent No. 269595, patented in 24 pumps for handling charged liquids the latest stage of the development
countries, and which was the basis and slurries. of impellers for homogenious
on which the firm was founded. slurries. The special features of these
pumps are their good efficiency, low
NPSH-value, non-clogging and wear
resistance, as well as being able to
cope with gaseous liquids.
Impeller E
air content: up to 5 %
Impeller EO
air content: up to 15 %
Impeller EOS
air content: up to 15 %
Programme Lay-out EGGER centrifugal pump programme
series E/EO/EOS consists of 34 pump
types and 5 bearing housing sizes
DN 50 to DN 500.
Casing cover
arrangement
Shaft seal
Impeller
Casing
Series
EO EOS 6 - 50
EO EOS 6 - 80
EO EOS 6 - 100
LB 2
EO EOS 6 - 125
EO EOS 7 - 50
EO EOS 7 - 80
E EO EOS 7 - 100
E EO EOS 7 - 125
E EO EOS 7 - 150
EO EOS 7 - 250
LB 3
EO EOS 8 - 80
E EO EOS 8 - 100
E EO EOS 8 - 125
E EO EOS 8 - 150
E EO EOS 8 - 200
EO EOS 8 - 250
EO EOS 8 - 300
LB 4
E EO EOS 9 - 100
E EO EOS 9 - 125
E EO EOS 9 - 150
E EO 9 - 200
EOS 9 - 200
E EO EOS 9 - 250
EO EOS 9 - 300
E EO EOS 10 - 150
EO EOS 10 - 200
EO EOS 10 - 250
EO EOS 10 - 300
EO EOS 10 - 350 LB 6
EO EOS 10 - 400
EO EOS 11 - 400
EO EOS 11 - 500
50
Summary of Designs Description of
designs:
Wet-pit design
Vertical shaft pumps
Standard casing
identical for
all designs.
Suction and
discharge flanges
can comply to most
international flange
standards.
Arrangement B
EO
EOS
Arrangement C
R-1035-3
The shaft seal is designed in such a All standard elements to Wide choice of shaft
way that different seal arrangements DIN - dimensions: sealing arrangements
can be fitted without modification to - Stuffing boxes DIN 3780
the pump casing cover. - Mechanical seals DIN 24960 the same shaft sleeve is
used for all shaft seal
arrangements
minimum number of
spare elements
easy maintenance
Double mechanical seal acc. Double mechanical seal acc. Special arrangements are possible
DIN 24960 (L 1K ), back-to-back DIN 24960 (L 1K ), back-to-back with (e.g. mech. seals with stationary
with external sealing liquid. external sealing liquid. Seal casing springs). Flushing connections are
with cooling or heating jacket. provided for.
Bearing housing (LB)
(mm)
Stuffing box insert
Packing ring
Inside (mm)
2 35 51 8
3 48 68 10
Single mechanical seal acc. Double mechanical seal acc. 4 65 90 12.5
DIN 24960 (L 1K ), (without DIN 24960 (L 1K ), in tandem
sealing liquid) (with pressureless internal 5 90 122 16
sealing liquid) 6 130 170 20
Material - Standard Assembly
GG -1.4408
Item GG GGG GGG 1.4408 HG 15-3
GG 25
Casing GG25 GGG50 GGG 50 1.4408 HG 15-3
Impeller GG20 GGG50 1.4408 1.4408 HG 15-3
Casing cover GG20 GG20 GG20 1.4408 HG 15-3
Wear disc GG20 GG20 1.4408 1.4408 GG20
Shaft Ck45 Ck45 Ck45 Ck45 Ck45
Shaft sleeve GGK-FP GGK-FP 1.4435 1.4408 GGK-FP+
Eut. 12 496
Service temperatures
for standard materials
upto 130°C.
Higher temperatures
and other materials
on request
E/EO/EOS Pump
with base-plate for direct drive.
Pump applications
Due to optimum impeller design,
difficult media can be handled
without problems.
Sugar industry
Clear, press and dirty water,
screened and unscreened juices
in all voncentrations, milk of lime
and other liquids.
Cellulose ndustry
Semi-chemical pulp, sulphite/sulphate
pulp, black liquor, wood chips, Chemical industry
defibration pulp, digester drainage
and waste waters. Crystal suspensions, filter slurries,
Power stations
polystyrene beads in water, caustic
soda solutions up to 50 %, hot Dust filter sludges, lime suspen-
brine, washing powder slurries, zinc sions and milk of lime.
slurry, milk of lime and pigment
suspensions.
Petrochemical industry
Hydrocarbons, slops, catalytic
sludge, carbonated drilling
sludge.
Fibre industry
Fibre cement slurry, leather fibres,
rockwool, glass fibres, textile fibres,
suspensions, nitro cellulose and
fibrous waste waters.
Steel industry
Plant water, industrial effluents,
scale water, scale sludge, gas
Textile industry and dust filter sludges and
Artificial and natural fibres, suspen- foundry sludge.
sions and fibrous waste waters.
Series E / EO / EOS Performance Curves 50 Hz
5 10 15 20 25 30 40 50 100 150 200 300 400 500 750 1000 1500 2000 3600 5400 Q (m3/h)
150
CEA 8723 A
100 8-80
80
7-50 7-80
60 7-100
50
40
6-50 6-80 6-100
30
6-125
H (m) 20
15
n = 2900 min -1
29.02.00- Gt
10
1 1.5 2 3 4 5 6 7 8 9 10 15 20 30 40 50 60 80 100 150 200 300 400 500 1000 1500 Q (l/s)
5 10 15 20 25 30 40 50 100 150 200 300 400 500 750 1000 1500 2000 3600 5400 Q (m3/h)
100
80 10-200
CEA 8723 B
10-150 10-250
60 10-300
9.5-200 10-350
50
9.5-250
40 9-100 9-125 9-150 9.5-300
10-400
9-200
30 9-250
8-80
8-100 9-300
H (m) 20 8-125
8-150
7-50 8-200
15
7-80
7-100 8-250
7-125
10
7-150
8 8-300
7-250
6
6-50 6-80 6-100
5 6-125 n = 1450 min -1
21.03.00 - Gt
4
1 1.5 2 3 4 5 6 7 8 9 10 15 20 30 40 50 60 80 100 150 200 300 400 500 1000 1500 Q (l/s)
5 10 15 20 25 30 40 50 100 150 200 300 400 500 750 1000 1500 2000 3600 5400 Q (m3/h)
100
80
CEA 8723 C
60
50
40 11-400
10-200 11-500
30 10-150 10-250
9.5-200 10-300
10-350
H (m) 20 9.5-250
9-100 9-125 9-150 9.5-300
15
9-200 9-250 10-400
10 8-80
8-100 8-125 9-300
8 8-150
7-50 7-80 8-200
6
7-100
5
8-250
4 7-125
8-300
3 7-150
6-50 6-80
6-100 7-250
2
6-125
1.5
n = 970 min-1
21.03.00 - Gt
1
1 1.5 2 3 4 5 6 7 8 9 10 15 20 30 40 50 60 80 100 150 200 300 400 500 1000 1500 Q (l/s)
Series E / EO / EOS Performance Curves 60 Hz
5 10 15 20 25 30 40 50 100 150 200 300 400 500 750 1000 1500 2000 3600 5400 Q (m3/h)
150
10-200 CEA 8729 A
100 10-250
80 9.5-200
9.5-250
60 9-100 9-125 9-150 9.5-300
50 9-200
9-250
40
8-80
8-100 9-300
8-125
30 8-150
7-50 8-200
H (m) 20 7-80
7-100
7-125 8-250
15
7-150
8-300
10 7-250
6-50 6-80
8
6-100 6-125
6
5
n = 1750 min -1
02.03.00 - Gt
4
1 1.5 2 3 4 5 6 7 8 9 10 15 20 30 40 50 60 80 100 150 200 300 400 500 1000 1500 Q (l/s)
5 10 15 20 25 30 40 50 100 150 200 300 400 500 750 1000 1500 2000 3600 5400 Q (m3/h)
80
CEA 8729 B
60
10-250
50 10-200 10-300 11-400
40
10-150
9.5-200
30 9-100 9.5-250
9-125 9-150 10-350
9-200 9.5-300 10-400
H (m) 20 9-250
15
8-80 8-100 8-200
8-125 9-300
8-150
7-50 8-250
10 7-80
7-100
8
7-125
6 8-300
7-150
5
7-250
4 6-50 6-80 -1
6-100 6-125 n = 1160 min
21.03.00 - Gt
3
1 1.5 2 3 4 5 6 7 8 9 10 15 20 30 40 50 60 80 100 150 200 300 400 500 1000 1500 Q (l/s)
5 10 15 20 25 30 40 50 100 150 200 300 400 500 750 1000 1500 2000 3600 5400 Q (m3/h)
60
50
CEA 8729 C
40
11-400
30
10-200 11-500
10-150 10-250
H (m) 20 9.5-200 10-300
9-100 9.5-250 10-350
15 9-125 9-150 9.5-300
9-200
9-250 10-400
8-100
10 8-80
8 8-125 9-300
7-50 8-150
6 7-80 8-200
5
7-100
7-125 8-250
4
7-150
3
7-250 8-300
6-50 6-80
6-100
2
6-125 n = 875 min-1
21.03.00 - Gt
1.5
1 1.5 2 3 4 5 6 7 8 9 10 15 20 30 40 50 60 80 100 150 200 300 400 500 1000 1500 Q (l/s)
Subject to modifications