This document contains sieve analysis data from tests on coarse and fine aggregates. For the coarse aggregate, two methods (A and B) were used and results show percentages retained and passing for various sieve sizes ranging from 1 inch to a pan. The same information is displayed for two fine aggregate tests using methods A and B, with sieve sizes ranging from 4.75mm to a pan. Initial and final masses are provided for each test, along with cumulative retained and passing percentages.
This document contains sieve analysis data from tests on coarse and fine aggregates. For the coarse aggregate, two methods (A and B) were used and results show percentages retained and passing for various sieve sizes ranging from 1 inch to a pan. The same information is displayed for two fine aggregate tests using methods A and B, with sieve sizes ranging from 4.75mm to a pan. Initial and final masses are provided for each test, along with cumulative retained and passing percentages.
This document contains sieve analysis data from tests on coarse and fine aggregates. For the coarse aggregate, two methods (A and B) were used and results show percentages retained and passing for various sieve sizes ranging from 1 inch to a pan. The same information is displayed for two fine aggregate tests using methods A and B, with sieve sizes ranging from 4.75mm to a pan. Initial and final masses are provided for each test, along with cumulative retained and passing percentages.