Professional Documents
Culture Documents
Akses Point USRMA-4485-zz-CSPS-enUS
Akses Point USRMA-4485-zz-CSPS-enUS
Akses Point USRMA-4485-zz-CSPS-enUS
NOTE
‐ When using the Web Access Software, the SSL settings of the Web browser are not disabled. Check the SSL settings, as required.
Press (Settings/Registration) ▶ [Preferences] ▶ [Network] ▶ [TCP/IP Settings] ▶ [SSL Settings] ▶ [Specify Allowed Versions]
▶ select [Maximum Version] and [Minimum Version] ▶ press [OK] ▶ [OK] ▶ restart the machine.
NOTE
‐ You can select [TLS 1.0], [TLS 1.1], or [TLS 1.2].
‐ Immediately after updating the firmware, the upper version limit is set to [TLS 1.2] and the lower version limit is set to [TLS 1.0].
Press (Settings/Registration) ▶ [Preferences] ▶ [Network] ▶ [TCP/IP Settings] ▶ [SSL Settings] ▶ [Algorithm Settings]
▶ select the encryption algorithm ▶ select [On] or [Off ] for [Restrict Use of DSA for Signature Algorithm] ▶ press [OK] ▶ [OK] ▶ restart the machine.
NOTE
‐ You can select [AES-CBC (256bit)], [AES-CBC (128bit)], [AES-GCM (256bit)], [AES-GCM (128bit)], [3DES-CBC], or [RC4] as the algorithm.
‐ If you do not want to use DSA for the signature algorithm, select [On] for [Restrict Use of DSA for Signature Algorithm].