Professional Documents
Culture Documents
Reviewer PDF
Reviewer PDF
Plastic limit = 27
Plasticity index = 29
Liquidity index = 0.30
A reinforced concrete T-beam is to be designed for tension reinforcement only. The beam width
is 250mm and the effective depth is 400mm. The flange thickness is 100mm and its effective
flange width is 900mm. The applied moment is 300 kN-m. The area of tension reinforcement
required is: Use fc’ = 20.7MPa and Fy = 414MPa.
a) furrow
b) flooding
c) subirrigation
d) trickle irrigation
a) Darcy-Weisbach formula
b) Manning formula
c) Chezy formula
d) Hazen-Williams formula
a) infiltration curve
b) all of these
c) rating curve
d) hydrograph
a) interception
b) depression storage
c) soil moisture
d) basin recharge
AB S. 15°36’ W. 24.22
BC S. 69°11’ E. 15.92
CD N. 57°58’ E. ?
DA S. 80°43’ W. ?
Find the moment of inertia, with respect to x-axis of the area bounded by the parabola y2 = 4x
and the line x = 1.
A machine costing P720,000 is estimated to have a book value of P40,545.73 when retired at the
end of 10 years. Depreciation cost is computed using a constant percentage of the declining book
value. What is the annual rate of depreciation in %.
A manufacturer can produce a commodity at a cost of P2 per unit. At a selling price of P5 each,
consumers have been buying 4000 pieces a month. For each P1.00 increase in that price, 400
fewer pieces will be sold each month. At what price a piece will the total profit be maximized?
3x – 2y + w = 11
x + 5y – 2w = – 9
2x + y – 3w = -6
What is the area bounded by the curve y2=x and the line x-4=0?
What is the volume of excavation in cu.m. between the two station. Use Prismoidal Formula.
A 3 degree curve has an angle of intersection of 24°. What is the length of the chord in meters?
Uses chord basis.