Professional Documents
Culture Documents
BS en Iso 07010-2012 + A5-2015 PDF
BS en Iso 07010-2012 + A5-2015 PDF
BS en Iso 07010-2012 + A5-2015 PDF
7010:2012+A5:2015
EN ISO 7010:2012
BS EN ISOBS
7010:2012+A5:2015
EN ISOcorrigendum
Incorporating 7010:2012
April 2015
BSIStandards
BSI StandardsPublication
Publication
Graphical symbols —
Safety colours and safety
signs — Registered safety
signs (ISO 7010:2011)
http://qstandard.org/
National foreword
This British Standard is the UK implementation of
EN ISO 7010:2012+A5:2015. It is identical to ISO 7010:2011 incorporating
amendments 1:2012, 2:2012, 3:2012, 4:2013 and 5:2014. It supersedes
BS EN ISO 7010:2012, which is withdrawn.
The start and finish of text introduced or altered by amendment is
indicated in the text by tags. Tags indicating changes to ISO text carry
the number of the ISO amendment. For example, text altered by
ISO amendment 1 is indicated by .
National Annex NA has been added by PH/8/1, to provide registered
safety signs which were originally in BS 5499-5, but have not
subsequently been included in ISO 7010, or those which have not been
included in either. This National Annex will be revised regularly to
include safety signs as they are standardized by ISO and BSI. All safety
signs within the National Annex conform to the design principles given
in BS ISO 3864-1 and the design criteria given in BS ISO 3864-3, as well as
using the ISO 7010 template available at http://www.iso.org/tc145/sc2.
The colorimetric and photometric properties of safety sign materials are
given in BS ISO 3864-4.
The original suite of standards on safety signs in BS 5499 included
BS 5499-1, BS 5499-5, BS 5499-6 and BS 5499-11. They were all
cross‑linked all have been withdrawn as follows.
—— BS ISO 3864-1 supersedes BS 5499-1.
—— BS ISO 3864-4 is new and covers material replacing that in the
http://qstandard.org/
previous edition of ISO 3864-1. BS 5378-2 has been withdrawn.
—— BS ISO 3864-3 supersedes BS 5499-6.
—— BS ISO 7010 supersedes BS 5499-5. Please note that
BS EN ISO 7010:2012+A3:2014 with National Annex NA supersedes
BS ISO 7010:2012.
—— BS ISO 20712-1 with National Annex supersedes BS 5499-11.
Guidance on the application of safety signs is given in BS 5499-4 and
BS 5499-10.
The use of safety signs does not replace the need for proper working
methods and for instruction and training in accident prevention and the
actions to be taken in the event of an emergency.
The UK participation in its preparation was entrusted by Technical
Committee PH/8, Graphical symbols, to Subcommittee PH/8/1, Graphical
symbols - Safety signs.
A list of organizations represented on this committee can be obtained
on request to its secretary.
This publication does not purport to include all the necessary provisions
of a contract. Users are responsible for its correct application.
© The British Standards Institution 2015.
Published by BSI Standards Limited 2015
ISBN 978 0 580 90209 3
ICS 01.080.20; 01.080.10; 13.220.01
Compliance with a British Standard cannot confer immunity from
legal obligations.
BRITISH STANDARD BS EN ISO 7010:2012+A5:2015
This British Standard was published under the authority of the Standards
Policy and Strategy Committee on 31 January 2013.
Amendments/corrigenda issued since publication
Date Text affected
31 January 2013 This corrigendum renumbers BS ISO 7010:2011 as
BS EN ISO 7010:2012. National Annex NA has been
added.
30 September 2014 Implementation of ISO amendment 1:2012 with
CEN endorsement A1:2014
30 September 2014 Implementation of ISO amendment 2:2012 with
CEN endorsement A2:2014
30 September 2014 Implementation of ISO amendment 3:2012 with
CEN endorsement A3:2014
31 January 2015 Implementation of ISO amendment 4:2013 with
CEN endorsement A4:2014
28 February 2015 Implementation of ISO amendment 5:2014 with
CEN endorsement A5:2015
30 April 2015 Correction to symbol M040 in Table 2
http://qstandard.org/
http://qstandard.org/
English Version
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
http://qstandard.org/
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7010:2012: E
worldwide for CEN national Members.
7010:2012
BS EN ISO 7010:2012+A5:2015 BS EN ISO 7010:2012
7010:2012 (E)
EN ISO 7010:2012+A5:2015 (E)
EN ISO 7010:2012 (E)
Foreword
The text of ISO 7010:2011 has been prepared by Technical Committee ISO/TC 145 “Graphical symbols” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 7010:2012.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at
the latest by January 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
EN ISO 7010:2012/A1:2014 (E)
The text of ISO 7010:2011 has been approved by CEN as a EN ISO 7010:2012 without any modification.
http://qstandard.org/
Foreword to amendment A1
The text of ISO 7010:2011/Amd 1:2012 has been prepared by Technical Committee ISO/TC 145 “Graphical
symbols” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 7010:2012/A1:2014.
This Amendment to the European Standard EN ISO 7010:2012 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by July 2014, and
conflicting national standards shall be withdrawn at the latest by July 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 7010:2011/Amd 1:2012 has been approved by CEN as EN ISO 7010:2012/A1:2014 without
any modification.
ii2 3
BS EN ISO 7010:2012+A5:2015
EN ISO 7010:2012+A5:2015 (E)
Foreword to amendment A2
The text of ISO 7010:2011/Amd 2:2012 has been prepared by Technical Committee ISO/TC 145 “Graphical
symbols” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 7010:2012/A2:2014.
This Amendment to the European Standard EN ISO 7010:2012 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by July 2014, and
conflicting national standards shall be withdrawn at the latest by July 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
EN ISO 7010:2012/A3:2014 (E)
The text of ISO 7010:2011/Amd 2:2012 has been approved by CEN as EN ISO 7010:2012/A2:2014 without
any modification.
http://qstandard.org/
Foreword to amendment A3
The text of ISO 7010:2011/Amd 3:2012 has been prepared by Technical Committee ISO/TC 145 “Graphical
symbols” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 7010:2012/A3:2013.
This Amendment to the European Standard EN ISO 7010:2012 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by July 2014, and
conflicting national standards shall be withdrawn at the latest by July 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 7010:2011/Amd 3:2012 has been approved by CEN as EN ISO 7010:2012/A3:2014 without
any modification.
iii
3
BS EN ISO 7010:2012+A5:2015
EN ISO 7010:2012+A5:2015 (E)
Foreword to amendment A4
The text of ISO 7010:2011/Amd 4:2013 has been prepared by Technical Committee ISO/TC 145 “Graphical
symbols” of the International Organization for Standardization (ISO) has been taken over as EN
ISO 7010:2012/A4:2014.
This Amendment to the European Standard EN ISO 7010:2012 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by April 2015, and
conflicting national standards shall be withdrawn at the latest by April 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
ENISO
The text of ISO 7010:2011/Amd 4:2013 has been approved by CEN as EN ISO7010:2012/A4:2014
7010:2012/A5:2015 (E)
without
any modification.
http://qstandard.org/
Foreword to amendment A5
This document (EN ISO 7010:2012/A5:2015) has been prepared by Technical Committee ISO/TC 145
“Graphical symbols” in collaboration with CCMC.
This Amendment to the European Standard EN ISO 7010:2012 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by July 2015, and
conflicting national standards shall be withdrawn at the latest by July 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 7010:2011/Amd 5:2014 has been approved by CEN as EN ISO 7010:2012/A5:2015 without
any modification.
3
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Contents Page
Introduction.......................................................................................................................................................vi
......................................................................................................................................................... v
1 ...................................................................................................................................................... 1
Scope .....................................................................................................................................................1
2 Normative references ............................................................................................................................
...........................................................................................................................11
3 Terms and
Terms and definitions...........................................................................................................................2
........................................................................................................................... 2
4 Referents and categorization of safety signs .....................................................................................
....................................................................................22
4.1 ................................................................................................................................................... 2
General ..................................................................................................................................................2
4.2 Referent (safety meaning) ....................................................................................................................
...................................................................................................................33
4.3 Categorization of safety signs .............................................................................................................
............................................................................................................86
5 Registered safety signs ........................................................................................................................
.......................................................................................................................86
.................................................................................................................................................... 124
Bibliography...................................................................................................................................................217
National
National Annex
Annex NA (informative) Additional
NA (informative) Additional BS
BS registered
registered safety
safety signs
signs ..................................................218
.................................................. 125
http://qstandard.org/
Introduction Introduction
There is a need to standardize a system of giving safety information that relies as little
Thereas is
possible
a needon
to the
standardize
use a system of
of words to achieve understanding. of words to achieve understanding.
Lack of standardization may lead to confusion and the risk of accidents. Lack of standardization may lead to confus
The use of standardized safety signs does not replace proper work methods, The instructions
use of and
standardized
accident safety signs do
prevention training or measures. Education is an essential part of any system that provides
prevention
safety
training
information.
or measures. Education
The safety signs are intended for use only where there is a risk to people. They mayThe
appear
safety
in signs
safetyare
signage
intended for use only
in workplaces and public areas, safety manuals and notices, product labelling and in escape
workplaces
and and
evacuation
public areas, safety m
plans, as appropriate. plans, as appropriate.
The safety signs in this International Standard have been validated by ISO/TC
The
145/SC
safety2 signs
according
in this
to International St
NOTE 1
Standard.
http://qstandard.org/
procedures of standardization current at the time of publication. procedures of standardization current at the
Some countries' statutory regulations may differ in some respects from those
NOTE
given1 in Some
Standard.
this International
countries' statutory regulatio
NOTE 2 Information on procedures, criteria of acceptability, safety sign templates and application
NOTE 2 ofInformation
safety signsonare
procedures, criteria
given on the website: http://www.iso.org/tc145/sc2. given on the website: http://www.iso.org/tc145/s
This International Standard prescribes safety signs for the purposes of accident prevention, fire protection,
o be used by all health hazardCommittees
Technical information and emergency
within evacuation.
ISO charged with
industry, to ensure that there is only one safety sign for each safety
ational StandardThe shape regularly
be revised and colour of eachsafety
to include safety signasare
signs according to ISO 3864-1 and the design of the graphical
they
rm to the design symbols
principlesisgiven
according
in ISOto3864.
ISO 3864-3.
http://qstandard.org/
addressed.
e time of publication. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air
traffic and, in general, to those sectors subject to a regulation which may differ with regard to certain points of
ons may differ inthis International
some Standard
respects from those and
givenof in
thethis
ISO 3864 series.
International
This International Standard specifies the safety sign originals that may be scaled for reproduction and
of acceptability, safety sign templates
application and application of safety signs are
purposes.
sc2.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 3864-1 Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs
and safety markings
ISO 3864-3, Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical
symbols for use in safety signs
ISO 3864-4, Graphical symbols — Safety colours and safety signs — Part 4: Colorimetric and photometric
properties of safety sign materials
© ISO 2014
2011 – All rights reserved v 1
BS EN ISO
BS EN ISO 7010:2012
7010:2012+A5:2015
7010:2012
EN
ISOISO 7010:2012+A5:2015 (E)
7010:2011(E)
ISO 7010:2011(E)
3.1
image content
written description of the elements of a graphical symbol or safety sign and their relative disposition
3.2
referent
idea or object that a graphical symbol is intended to represent
3.3
safety sign
sign giving a general safety message, obtained by a combination of a colour and geometric shape and which,
by the addition of a graphical symbol, gives a particular safety message
3.4
safety sign original
safety sign with which a referent, a graphical representation and a description of the application are
associated
3.5
supplementary sign
sign that is supportive of another sign and the main purpose of which is to provide additional clarification
This International Standard will be maintained electronically through the use of a database. The indexes of
this database will be used in these summaries as search engines with each registered safety sign having a
unique reference number1).
Table 1 gives the list of referents in alphabetical order and provides the safety sign functional reference
number.
Table 1 (continued)
Table 1 (continued)
No photography
http://qstandard.org/
No open flame; Fire, open ignition source and smoking prohibited P003
P029
No pushing P017
No reaching in P015
No sitting P018
No smoking P002
No stepping on surface P019
No thoroughfare P004
Non-ionizing radiation, warning W005
Not drinking water P005
Opaque eye protection must be worn M007
Open safety bar of chairlift M034
Optical radiation, warning W027
Overhead load, warning W015
Overhead obstacle, warning W020
Oxidizing substance, warning W028
Oxygen resuscitator E028
Portable foam applicator unit F010
Pressurized cylinder, warning W029
Protect infants’ eyes with opaque eye protection M025
Radioactive material or ionizing radiation, warning W003
Refer to instruction manual/booklet M002
Release falls in launch sequence M042
Release lifeboat gripes in launch sequence M045
Remote release station F014
Table 1 (continued)
http://qstandard.org/
Use barrier cream M022
Use footbridge M023
Use gas detector M048
Use handrail M012
Use litter bin M030
Use protective apron M026
Use self-contained breathing appliance M047
Use table saw adjustable guard M031
Use this walkway M024
Warning; Barbed wire W033
Warning; Bull W034
Warning; Falling objects W035
Warning; Fragile roof W036
Warning; Hand crushing between press brake and material W031
Warning; Hand crushing between press brake tool W030
Warning; Rapid movement of workpiece in press brake W032
Warning; Run over by remote operator controlled machine W037
Warning; Sudden loud noise W038
Wash your hands M011
Water fog applicator F011
Wear anti-static footwear M032
Wear ear protection M003
Wear eye protection M004
Wear a face shield M013
Wear head protection M014
Table 1 (continued)
http://qstandard.org/
E is the category for signs indicating an evacuation route, the location of safety equipment or a safety
facility, or a safety action (safe condition signs);
Table 2 summarizes the registered safety signs in terms of safety sign category in accordance with
ISO 3864-1.
http://qstandard.org/
comprehension of the safety sign is maintained. Consistent reproduction and use of these safety signs will
lead to a progressively improved degree of comprehension at the international level.
In cases where the orientation of the graphical symbol is not essential to the meaning of the safety sign, the
graphical symbol may be reproduced in a mirrored form. For prohibition signs, it is essential that the
prohibition bar does not obscure significant details of the graphical symbol.
NOTE The graphical symbol is the complete image containing all the graphical symbol elements as shown in the
registered safety sign.
Where a registered safety sign is not available to indicate a particular desired meaning, the meaning shall be
obtained either by developing a new safety sign following the design principles of ISO 3864-1 and ISO 3864-3
or by using the appropriate general sign (ISO 7010-M001, -P001, -W001), together with supplementary safety
information.
Tables 3 to 7 present the safety sign originals according to their category as follows:
6
8 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Safety sign
Safety sign
Safety sign
http://qstandard.org/
Reference number E003 F003 M003 P003 W003
Referent First aid Fire ladder Wear ear protection No open flame; Warning;
Fire, open ignition Radioactive material
source and smoking or ionizing radiation
prohibited
Safety sign
Table 2 (continued)
Category
E F M P W
Safety sign, Evacuation route,
reference number location of safety
and referent equipment or Fire equipment Mandatory action
Prohibition signs Warning signs
safety facility, signs signs
safety action (safe
condition signs)
Safety sign —
http://qstandard.org/
ISO 7010:2011/Amd.4:2013(E)
Function
Safety sign — To indicate the location of a fixed fire extinguishing
battery
Image content
Four bottles attached to a manifold, flame determinant
Function Function
Safety sign — To indicate the location of a wheeled fire extinguisher in the process To prohibit climbing
Image content Image content
Bottle on wheeled cart (profile), flame determinant Human figure (rear view), 6 horizontal lines between
two vertical lines
Function
Safety sign — To indicate the location of a portable foam applicator
unit
Image content
Foam can with goose neck hose terminating with a
venturi nozzle, flame determinant
8
10 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 2 (continued)
Category
E F M P W
Safety sign, Evacuation route,
reference number location of safety
and referent equipment or Fire equipment Mandatory action
Prohibition signs Warning signs
safety facility, signs signs
ISO 7010:2011/Amd.4:2013(E)
Reference No.
ISO 7010‑F011
Referent
Water fog applicator
Function
Safety sign — To indicate the location of a water fog applicator
Image content
90° bend terminating in a nozzle with five non-parallel
segmented lines, flame determinant
Function
F012
Hazard
Reference number E012 — M012
Not being able to locate a fixed fire extinguishing installation P012 W012
Fixed fire
Human behaviour that is intended to be caused after understandingISO
the 7010:2011/Amd.4:2013(E)
safety sign’s meaning
http://qstandard.org/
extinguishing
Related referents
ISO 7010-F001, ISO 7010-F002, ISO 7010-F003, ISO 7010-F004, ISO 7010-F005, ISO 7010-F006, ISO 7010-F007,
installation
Safety sign F013: Fixed fire extinguishing bottle
ISO 7010-F008, ISO 7010-F009, ISO 7010-F010, ISO 7010-F011, ISO 7010-F013, ISO 7010-F014, ISO 7010-F015 Electricity
Additional
© ISO 2013 – information
All rights reserved Reference No. 37
ISO 7010‑F013
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Referent
Fixed fire extinguishing bottle
Function
Safety sign — To indicate the location of a fixed fire extinguishing
bottle
Image content
Bottle (head-on view) supported on its side on a frame
at two points, flame determinant
Referent Stretcher —
extinguishing Wear a face shield
Being aware of the location of a fixed fire extinguishing bottle
Related referents No activated mobile Warning;
Safety sign E014: Child seat presence and orientation detection system (CPOD)
38
bottle
ISO 7010-F001, ISO 7010-F002, ISO 7010-F003, ISO 7010-F004, ISO 7010-F005, ISO 7010-F006, ISO 7010-F007,
Safety sign F014: Remote release station
ISO 7010-F008, ISO 7010-F009, ISO 7010-F010, ISO 7010-F011, ISO 7010-F012, ISO 7010-F014, ISO 7010-F015
© ISO 2013 – All rights reserved
phones Guard dog
Additional
Reference No.information Reference No.
ISO
Test data obtained 7010-E014
according ISO 7010‑F014
to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Referent Referent
Image content
Vehicle passenger seat, child in rear-facing child seat,
dot, three curved lines of increasing size radiating from
the dot, filled semi-circle
Function
Safety sign in the process Function
—
To indicate the location of drinking water
To indicate the location of a fire monitor
Image content
Fire monitor (profile), flame determinant
Image content
Tap above glass, two wavy lines
Table 2 (continued)
Category
E F M P W
Safety sign, Evacuation route,
reference number location of safety
and referent equipment or Fire equipment Mandatory action
Prohibition signs Warning signs
safety facility, signs signs ISO 7010:2011/Amd.1:2012(E)
Reference No.
ISO 7010-P016
Referent
Image content
Water hose with nozzle, 5 divergent lines of dots
Safety sign —
Safety sign —
Safety sign —
Image content
Vehicle passenger seat, child in rear-facing child seat,
dot, three curved lines of increasing size radiating from
the dot, filled semi-circle
Referent Emergency
— stop —
Installing a CPOD-equipped child seat on a passenger seat protected by a frontal airbag in a vehicle that recognizes
the CPOD child seat Wear safety belts Do not use lift in the Warning;
button
Related referents
—
event of fire Overhead obstacle
Additional information
This safety sign will be used along with a supplementary sign as part of a label for CPOD-equipped child seats or for
vehicles equipped with the CPOD sensing system. These two signs are part of ISO/TS 22239-3.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
10
12 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 2 (continued)
Category
E F M P W
Safety sign, Evacuation route,
reference number location of safety
and referent equipment or Fire equipment Mandatory action
Prohibition signs Warning signs
safety facility, signs signs
safety action (safe
condition signs)
Safety sign — —
Image content
Doorway with door opening outwards, curved arrow
pointing to the left
http://qstandard.org/
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Image content
Doorway with door opening outwards, curved arrow
pointing to the right
Referent —
pushing on the —
Being aware that the door opens by pushing on the right-hand side
Related referents
Use footbridge Do not obstruct Warning;
©ISO
right-handSafety
ISO7010-E022,
side
ISOreserved
2012 – All rights 7010-E033, ISO 7010-E034, ISO 7010-E057, ISO 7010-E058
sign E024: Evacuation temporary refuge
Additional information
5 Corrosive substance
Reference
Test data obtained according to ISO 9186-1:2007 are not available. No.
Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented byISO
manuals, instructions or training.
7010‑E024
Referent
Evacuation temporary refuge
Safety sign — —
Function
To indicate the location of a temporary safe area
(refuge) to await rescue assistance, provided for those
unable to use stairs in the event of an emergency
evacuation
Image content
Human figure in wheelchair (profile), four white
arrows coming from the corners pointing to it
Referent Evacuation
— —
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Being aware of the location of an area provided for temporary waiting for rescue assistance for those unable to Use this walkway Do not walk or stand Warning;
temporary refuge
use stairs in the event of an emergency evacuation
6Related referents © ISO 2012 – All rights reserved here Crushing of hands
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from
national testing, however, showed that in one country the safety sign did not reach the criteria of acceptability.
Consequently, a supplementary text sign shall be used to increase comprehension except when the safety sign
is supplemented by manuals, instructions or training.
Safety sign — —
Table 2 (continued)
Category
E F M P W
Safety sign, Evacuation route,
reference number location of safety
and referent equipment or Fire equipment Mandatory action
Prohibition signs Warning signs
safety facility, signs signs
safety action (safe
condition signs)
Safety sign — —
Function
Safety sign — —
To indicate the location of a medical grab bag — Function
To signify that checks must be conducted to ensure that
Image content guards are in place or used
Bag (outlined) with handles, first aid cross
Image content
Series of horizontal and vertical lines and two interlocking
illustrations of cog wheels
http://qstandard.org/
Reference number
Hazard
E027
—
Not being able to locate a medical grab bag — Hazard
Moving
ISO machinery
M027
—
7010:2011/Amd.1:2012(E)
P027 W027
Human behaviour that is intended to be caused after understandingISO
the 7010:2011/Amd.4:2013(E)
safety sign’s meaning Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Keep locked
Function
Safety sign — —
To indicate the location of an oxygen resuscitator — Function
Image content
To signify that a cabinet or facility must be kept locked
Oxygen cylinder with manual control, hose line and
mask, first aid cross
Image content
Padlock with keyhole and four complete chain links and
two pieces
Referent —
Oxygen
Being aware of the location of an oxygen resuscitator
Related referents
— Keep locked
— Do not wear gloves
Ensuring that cabinets or facilities containing harmful substances or equipment are kept locked
Related referents Safety sign M029: Sound horn
Warning;
resuscitator
ISO 7010-E003, ISO 7010-E004, ISO 7010-E009, ISO 7010-E010, ISO 7010-E011, ISO 7010-E012, ISO 7010-E013,
ISO 7010-E027, ISO 7010-E029
—
© ISO 2012 – All rights reserved 7 Oxidizing substance
4 © ISO 2013 – All rights reserved Additional information Reference No.
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
The first aid cross may be replaced with another element appropriate to cultural requirements of the target
group.
used to increase comprehension except when the safety sign is supplemented by
ISOmanuals, instructions or training.
7010-M029
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions Referent
or training.
Sound horn
Safety sign — — — Function
To signify that a horn must be sounded
Image content
Horn, three curved lines
Referent — — Sound—
horn No photography
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Equipment operator or driver sounding horn
Warning;
Safety sign W030: Warning; Hand crushing between press brake tool
Safety sign E029: Emergency escape breathing device Related referents
Safety sign M030: Use litter bin
pressurized cylinder Reference No.
—
Reference No. Reference No.
2Additional information © ISO 2012 – All rights reserved
© ISO 2013 – All rights reserved ISO 7010‑E029 5 ISO 7010-W030
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplementedISO 7010-M030
by manuals, instructions or training.
Referent Referent
Emergency escape breathing device Referent
Warning; Hand crushing between
press brake tool
Use litter bin
Function
Safety sign — —
To indicate the location of an emergency escape
breathing device (EEBD)
— Function
— Function
To warn of the closing jaws of a press brake tool
To signify that litter must be placed in a litter bin
Image content
Full-face mask with regulator (front view), first aid
cross Image content
Image content Press brake tool (punch and die), hand between punch
Human figure, bin/container and four diamond shapes and die, arrow pointing downwards
Hazard
Warning; Hand
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Human behaviour that is intended to be caused after understanding the safety sign’s meaning Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Taking care to avoid hands being caught between the jaws of a press brake tool
Referent Emergency— escape
Being aware of the location of an EEBD
Related referents
— Use litter
— bin
Putting litter in a bin or container
Related referents
Do not tie knots crushing—between
Related referents
12
14 2014 – All rights reserved
© ISO 2011
BS EN ISO 7010:2012
BS EN
BSISO ISO
ISOISO
EN 7010:2012
7010:2011(E)
7010:2012
BS EN 7010:2011(E)
ISO
ISOISO 7010:2012
7010:2011(E)
BS EN
ISO 7010:2012
7010:2011(E)
BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E)
ISO 7010:2011(E)
EN ISO 7010:2012+A5:2015 (E)
Table 2 (continued)
Table 2 (continued)
Table 2 (continued)
Category
Category
E F M P W
Category
E F M P W
Safety sign, Evacuation route,
reference number
Safety sign, E F M P W
location of safety
Evacuation route,
and referent
reference
Safety number
sign, equipment
location
Evacuationof safety or
route, Fire equipment Mandatory action
and referent Prohibition signs Warning signs ISO 70
reference number safety
location facility,
equipment
of safety or Fire signs
equipment signsaction
Mandatory ISO 7010:2011/Amd.1:2012(E)
and referent
ISO 7010:2011/Amd.4:2013(E)
Prohibition signs Warning signs
safety action
safety facility,
equipment (safe
or signs
Fire equipment signsaction
Mandatory
condition
safety actionsigns)(safe Prohibition signs Warning signs
Safety sign W031: Warning; Hand crushing between press brake
condition
safety actionsigns)(safe
Reference No.
ISO 7010‑E031
Reference No.
ISO 7010
condition signs) ISO 7010-M031
Referent Referent
Shipboard general alarm Referent
Warning; Hand cru
press brake an
Use table saw adjustable guard
Function
Safety sign — —
To indicate the location of a general alarm button on
board ship
— Function
— Function
To warn of the danger of hand
Hazard
Warning;
Human behaviour that is intended to be caused after understanding the safety sign
Reference number — —
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
— P031
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
—
ISO 7010:2011/Amd.2:2012(E) Taking care to avoid hands being caught between a workpiece and the moving parts of a
Referent ISO Shipboard — general
Crew being aware of the location of a general alarm button
— ISO
Use table
— saw
7010:2011/Amd.1:2012(E)
Ensuring that the saw is guarded
Do not alter the state Hand crushing — Related referents
Reference number —
7010:2011/Amd.4:2013(E)
Related referents
— —
Related referents
adjustable P031 —
alarm —guard of the switch
ISO 7010-W030, ISO 7010-W032
Referent ISO 7010-F005
—
Additional information
— —
Additional information
Do not alter the state between —W032: Warning;
press
Safety sign brake
Additional information
Rapid movement of workpiece in
Function
Safety sign — —
To indicate the location of an
board ship
assembly station on — Function
— Function
To warn of possible movemen
Safety sign — — — —
To signify that anti-static footwear must be worn workpiece when operating a p
Image content
Five human figures in different sizes standing on a
square, four arrows coming from the corners pointing Image content
to them Image content Protruding workpiece, press
End of leg, shoe with lightning bolt on sole bending press brake operato
Referent Human behaviour that is intended to be caused after understanding the safety—
— — Do not use for —
http://qstandard.org/
Not being able to locate an assembly station on board ship Creation of static electricity that can cause sparks leading to fire and explosions
Warning;
Human behaviour that is intended to be caused after understanding the safety sig
Reference number — —
sign’s meaning
— P032
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
—
ISO 7010:2011/Amd.1:2012(E)
Taking care to avoid a protruding workpiece in a press brake
face notgrinding
ISO 7010:2011/Amd.3:2012(E)
Referent Shipboard—assembly
Being aware of the location of an assembly station on board ship
Related referents
—
ISO 7010:2011/Amd.4:2013(E) Wear anti-static
—
Wearing anti-static footwear
© ISO 2012 – All rights reserved
Related referents
Do use for 5 —
© ISO 2012 – All rights reserved
Rapid movement
Related referents
station footwear
7
face grinding
© ISO 2013 – All rights reserved ISO 7010-W030, ISO 7010-W031
ISO 7010‑E033
ISO 7010-M033
ISO 7010-
BS EN ISO
ISO —
7010:2012 Warning; Ba
Safety sign —
Function
To indicate the direction in— —
Close safety bar of chairlift
BS EN 7010:2012
—
ISO 7010:2011(E)
Function
which a sliding door opens
ISO 7010:2011(E)
Function To warn of barbed wire
Image content
To signify that the safety bar of the chairlift must be
Rectangle bordered top and bottom, arrow pointing to closed
the right
Image content
Reference number — — — P033
Image content — Barbed wire
Safety sign —
Function
To indicate the location of a—
medical grab bag
Category
— — Function
Function To warn of bulls
Image content
E F M P W
To signify that the safety bar of the chairlift must be
Bag (outlined) with handles, first aid cross opened
Safety sign,
Image content Bull
equipment or
Not being able to locate a medical grab bag
Fire equipment ISO Mandatory
Safety bar opened too early Human behaviour that is intended to be caused after understanding the safety sig
ISO Prohibition
7010:2011/Amd.2:2012(E) signs Warning signs
Human behaviour that is intended to be caused after understanding the safety sign’s meaning 7010:2011/Amd.3:2012(E) ISO 7010:2011/Amd.1:2012(E)
Do machine
hand-held grinding
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Referent safetyslides facility, signs Opensigns Warning;
Taking care when in the vicinity of bulls
ISO Door —
7010:2011/Amd.5:2014(E)
Related referents
left
Being aware of the location of a medical grab bag
— —
safety bar
Opening the safety bar of a chairlift not use with — Related referents
ISOsafety action
to open
7010-E003, ISO 7010-E004,
ISO 7010-E028, ISO 7010-E029
(safe
ISO 7010-E009, ISO 7010-E010, ISO 7010-E011, ISO 7010-E012, ISO 7010-E013, 2 ofSafety
ISO 7010-M033chairlift
Related referents
hand-held
sign M035: Immediately leave the tow-track
machine grinding 10
in the event of falling Bull
© ISO 2012 – All rights reserved
—
Safety sign W035: Warning; Falling objects
Additional information
9
condition signs) machine
© ISO 2013 – All rights reserved Additional information Safety sign P035: Do not wear metal-studded footwear
Additional information Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a sup
Safety sign E035: Liferaft knife used to increase comprehension except when the safety sign is supplemented by manua
Reference
Test data obtained according to ISO 9186-1:2007 are not available. No.
Consequently, a supplementary text sign shall be Reference No.
The first aid cross may be replaced with another element appropriate to cultural requirements of the target
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training. Reference No.
group. Reference No.
ISO 7010-P035 ISO 7010-
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
ISO 7010‑E035
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions ISO 7010-M035
or training.
Referent
Referent Referent
Referent
Liferaft knife Do not wear metal-studded footwear
Immediately leave the tow-track Warning; Falli
in the event of falling
Function
h
Safety sign — —
To indicate the location of a liferaft knife — Function
Function
—
To prohibit the use of metal-studded footwear
Function
To warn of falling objects
Image content
To signify that the tow-track must be left immediately in
Liferaft knife (with rounded tip and drilled-out holes
the event of falling
in blade) between sliced braided rope Image content
Image content
End of leg, shoe with circles on sole Upper human figure, four ve
Image content shapes
Human figure on ski, two parallel straight lines, arrow
pointing to the right
Hazard
Reference number —
E035 — M035
— P035
P031 W035
—
Hazard Hazard
Falling objects
Hazard Lack of grip between metal-studded footwear and certain floor surfaces
Not being able to locate a liferaft knife Human behaviour that is intended to be caused after understanding the safety sign
Human behaviour that is intended to be caused after understanding the safety sign’s meaning Immediately leave
Obstruction on the tow-track Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Taking care when in the vicinity of potential falling objects
Donot
notalter
wearthe
metal- Warning;
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Referent Liferaft—
knife — — in the Do state —
Not wearing metal-studded footwear
the two-track
Being aware of the location of a liferaft knife ©Related
ISO 2012referents
– All rights reserved
be
©Leaving
ISO 2012the
– All rights reserved
tow-track after falling 3
Related referents Related referents
—
4 Related referents
studded
of thefootwear
switch Fallling objects
13
© ISO 2013 – All rights reserved
event of falling
— ISO 7010-M032
Additional information
© ISO 2011 – All rights reserved
Additional information
— Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one co
13
Additional information Test data obtained according to ISO 9186-1:2007 are not available.
testing,Consequently,
however, showed a supplementary text sign
that in one country the shall
safetybesign exceeded the criteria of accep
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
© ISO 2011 – All rights reserved
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
used to
Test data obtained according to ISO 9186-1:2007 are not available. increase comprehension
Consequently, except
a supplementary when
text signthe safety
shall
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
be sign issign
supplemented
may be used bytomanuals,
increaseinstructions or training.
comprehension.
supplementary text sign may not be required.
If the safety sign is supplemented by manu
Table 2 (continued)
Category BS EN ISO
BS EN ISO 7010:2012
7010:2012
ISO 7010:2011(E)
E F M P ISO 7010:2011(E)
W
Safety sign, Evacuation route,
reference number location of safety
and referent equipment or Fire equipment Mandatory action
Prohibition signs
ISO 7010:2011/Amd.3:2012(E) Warning signs ISO 7010:2011/Amd.2:2012(
safety action (safe Safety sign M036: Lift ski tips Safety sign W036: Warning; Fragile roof
condition signs)
Safety sign E036: Lifeboat
Safety sign P036: No children allowed
Reference No.
Reference No.
Table 2 (continued)
Reference No. Reference No. ISO 7010-W036
ISO 7010-P036
ISO 7010‑E036
ISO 7010-M036
Referent
Referent Referent Warning; Fragile roof
Lifeboat No children allowed
Category
Referent
Lift ski tips
Function
Function
Safety sign — —
To indicate the location of a lifeboat — Function
— To warn of a fragile roof
E F M P W
Function To prohibit children from entering a dangerous area
Image content To signify that ski tips must be lifted
Lifeboat, two wavy lines Image content
Safety sign,
Image content Human figure, roof, pattern radiating from one foot
Evacuation route, Image content Small boy and larger girl
and referent
Hazard
Hazard equipment or Fire equipment Mandatory
Reference number E036— — — action
M036 P036 signs
P031 W036
— signs
Hazard Fragile roof
Hazard
Not being able to locate a lifeboat
ISO 7010:2011/Amd.4:2013(E) ISO
Prohibition
7010:2011/Amd.3:2012(E)
Areas dangerous to children
Warning
Human behaviour that is intended to be caused after understanding theISO 7010:2011/Amd.5:2014(
safety sign’s meaning
safety
behaviour that isfacility, signs signs
Crashing of the ski tips into technical parts of the cableway
ISO 7010:2011/Amd.4:2013(E)
Human intended to be caused after understanding the safety sign’s meaning Human behaviour that is intended to be caused after understanding
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
the safety
Taking care when sign’sroof
on a fragile meaning
Referent safety
Related
Lifeboat —
referents action (safe
Being aware of the location of a lifeboat
— Lift ski—tips
Lifting the ski tips
Noalter
Do not children
the state
Children not entering a dangerous area
Related referents
Related referents
condition
ISO 7010-M039, ISO 7010-M045
signs)
Safety sign E037: Rescue boat — Safety sign M037: Close and secure— ofallowed
the switch
hatches in launch sequence Fragile roof
Additional information
Reference
Additional information Additional information
Additional information Test data No.
Reference obtained according to ISO 9186-1:2007 are not available fromNo.
more than one country. Findings from nation
Reference No. Reference
Test dataNo. testing,
obtained according to ISO 9186-1:2007 are not available however,
from showed
more than that in one
one country. country
Findings thenational
from ISO 7010‑W037
safety sign did not reach the criteria of acceptability. Consequent
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
ISO 7010‑E037 testing, however, ISO
showed that in one country the safety sign adid
7010‑M037 supplementary
not reach thetext sign of
criteria shall be used toConsequently,
acceptability. increase comprehension except when the safety sign is supplemented
Reference
Reference number
number
Hazard
E037
—
—
Not being able to locate a rescue boat —
—
Hazard
—
M037
—
Uncontrolled flooding, exposure to a hazardous atmosphere,Uneven
Hazard
loss ofsurface
breathable
P032
P037
P031 W037
—
—
air from the self-contained air
ISO
Moving7010:2011/Amd.2:2012(E)
remote operator
Humanfollowing
and line supporting structure outside the tow-track, behaviour
controlled machine
ISO 7010:2011/Amd.3:2012(E)
usersthat is intended
of the tow-track to be caused after understanding the safety sign’s meaning
Human behaviour that is intended to be caused after understandingISO
the 7010:2011/Amd.4:2013(E)
safety sign’s meaning
Close and secure
support system, fire and smoke
Warning; Run over
ISO 7010:2011/Amd.4:2013(E)
Human behaviour that is intended to be caused after understanding
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Taking care when in thesign’s
the safety vicinity of a remote operator controlled machine
meaning
Referent Rescue—
—boat — hatches— Do
Do not
notleave
use the
for —
http://qstandard.org/
Being aware of the location of a rescue boat
Do not alter the state by remote
Related referents
Referent — —in launch —operator
Not leaving the tow-track
Related referents Closing and securing hatches at the appropriate time Safety sign W038: Warning; Sudden loud noise
Related referents
Safety sign P038: Do not — swing the chair
ISO 7010-M041
Additional information
Safety sign E038: Liferaft
Related referents
— sequence ©— tow-track
face grinding
© ISO 2012 – All rights reserved Safety sign M038: Start engine in launch sequence
of the switch
ISO 2012 – All rights reserved
controlled machine 5 © ISO 2012 – All rights reserved
Additional information
Reference No.
9 Reference No.
Additional Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
© ISO 2013 – All rights reserved Reference No. 11 Additional information Reference No.information ISO 7010-W038
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall shall be used to increase comprehension except when the safety sign is supplemented by manuals, instruction
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
training.
ISO 7010‑E038
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
Test data obtained according to ISO 9186-1:2007 are not available.
ISO
used to Consequently,
7010‑M038
a supplementary
increase comprehension text the
except when
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
signsafety signoristraining.
supplemented by manuals, instructions or training.
ISO 7010-P038
or training. Referent
Referent Referent
Warning; Sudden loud noise
Liferaft Start engine in launch sequence Referent
Do not swing the chair
Function
Function Function
Safety
Safety sign
sign —
— —
—
To indicate the location of a liferaft —
— To signify that the engine of a lifeboat or rescue boat
must be started in launch sequence Function
—
—
To warn of sudden loud noise
Image content
To prohibit swinging the chair
Image content
Liferaft, two wavy lines Image content
Handcrank and curved arrow pointing in clockwise
direction Human head (front view), hand, three curved lines
Image content
Two human figures sitting in two chairs, line above,
curved arrow with two arrow heads
Hazard
number —
Not being able to locate a liferaft — —
No propulsion at the time of need or the engine is started too early
Chair P032
in the
falling sequence to launch
down
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
— Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Human
ISO behaviour that is intended to be caused after understanding the safety sign’s meaning
7010:2011/Amd.4:2013(E) ISO 7010:2011/Amd.4:2013(E) ISO 7010:2011/Amd.5:2014(E)
Human Taking care in
behaviour that is intended to be caused after understanding theareas where
safety there
sign’s can be sudden loud noise
meaning
Referent Liferaft
—
Being aware of the location of a liferaft
— Start engine
— in
Starting the engine at the appropriate time
Do
Do not
not swing
use for Warning; —Sudden Related referents
Referent
Not swinging the chair
Related referents — — —
Related referents Do not use for —
loud noise
Related referents —
ISO 7010-E039, ISO 7010-M040 42launchSafety
— sequence the
sign M039: Lower lifeboat to6the water wet chair
grinding Additional information
Safety sign E039: Davit‑launched liferaft
face
in launch
grinding
sequence
Safety sign P039: Hot works prohibited
— © ISO 2013 – All rights reserved © ISO 2012 – All rights reserved
Additional information
© ISO 2014 – All rights reserved 1
Additional information Additional information Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall b
12 © ISO 2013 – All rights reserved used to increase
Test data obtained according to ISO 9186-1:2007 are notReference No.
available. Consequently, a supplementary sign shall Test data obtained according to ISO 9186-1:2007 are not Reference
available. No.
Consequently, a supplementary Reference
text signare not available. No. comprehension except when the safety sign is supplemented by manuals, instructions or training.
Test data obtained according to ISO 9186-1:2007 Consequently, a supplementary text sign shall be
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
ISO 7010‑E039 shall be used to increase comprehension except when the safety
used sign is supplemented by manuals, instructions
training.
or training.
to increase ISO 7010‑M039
comprehension except when the safety sign is supplemented byISO 7010‑P039
manuals, instructions or training.
Safety
Safety sign —
Function
— — —
Function Function
sign — —
To indicate the location of a davit-launched liferaft
Image content
— To signify that the lifeboat must be lowered in launch
sequence
To prohibit hot works
Image content
—
Image content
Liferaft suspended from single point davit Hand holding a tool, four lines of different lengths,
Lifeboat on two falls, arrow pointing down, two wavy each with a star at the end, 5th star, three parallel
lines wavy lines
Reference
Reference number
number
Hazard
—
E039
—
Not being able to locate a davit-launched liferaft
—
—
Hazard
BS EN ISO
Lifeboat
—
M039
—7010:2012+A5:2015
is not
P034
P039
Hazard
P033
lowered to the water at the appropriate timeFire, explosion ISO 7010:2011/Amd.3:2012(E)
—
—
Lower lifeboat to
EN ISO 7010:2012+A5:2015 (E)
Human behaviour that is intended to be caused after understandingISO
the 7010:2011/Amd.4:2013(E)
safety sign’s meaning Human behaviour that is intended to be caused after understanding
Human behaviour the safety
that issign’s meaning
intended to be caused after understanding the safety sign’s meaning
ISO 7010:2011/Amd.4:2013(E)
Referent
Referent —
Davit-launched
Being aware of the location of a davit-launched liferaft
Related referents— —
— the water—
Lowering the lifeboat at the appropriate time
—in launch
Related referents
Do
DoHot not use
notworksusewith
for
Not doing hot works
Related referents
—
—
hand-held
prohibited grinding
12
liferaft Safety sign E040: Lifebuoy Safety sign M036:© Lift ski tips © ISO 2012 – All rights reser
7
sequence wet
in launchgrinding
ISO 7010-E038, ISO 7010-M040 ISO 7010-E036, ISO 7010-M045 Table 5 (continued) —ISO 2012 – All rights reserved
Safety sign M040: Lower liferaft to the water sequence
Additional
ISO 2013 – information 13 ©Additional
information Additional information
43
machine
© All rights reserved ISO 2013 – All rights reserved
Reference No.
Test data obtained according to ISO 9186-1:2007 are not Reference No.
available. Consequently, a supplementary sign shall Test data obtained according to ISO 9186-1:2007 are not available.
Reference No. Test dataConsequently, a supplementary
obtained according text sign are not available. Consequently, a supplementary text sign
to ISO 9186-1:2007
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
ISO 7010‑E040 shall be used to increase comprehension except when the safety sign
shall be is supplemented
used by manuals, instructions
to increase comprehension except when the safety sign is supplemented by manuals, instructions
ISO 7010‑M040
training.
or training. or training.
ISO 7010-M036
Referent Referent
Lifebuoy Lower liferaft to the water in launch sequence
Referent
Lift ski tips
Function Function
Safety sign — —
To indicate the location of a lifebuoy — To signify that the liferaft must be lowered in launch
Function
—
Image content sequence
To signify that ski tips must be lifted
Ring buoy with four becketed lines Image content
Liferaft on single fall, arrow pointing down, two wavy
lines
Image content
Human figure with ski, chairlift, arrow pointing upwards
Referent Lifebuoy
—
Being aware of the location of a lifebuoy
Related referents
— Lowering
water—in launch
Lifting the the
thereferents
Related
liferaft at the appropriate time
ski tips Do not use with —
Related referents
ISO 7010-E041, ISO 7010-E042, ISO 7010-E043
hand-held grinding
Additionalsequence
ISO 7010-E038, ISO 7010-E039
—
14
Additional information © ISO 2013 – All rights reserved 44 information 10 © ISO 2013 – All rights reserved © ISO 2014 – All rights reserved
machine
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
training. or training.
Table 2 (continued)
Category
E F M P W
Safety sign, Evacuation route,
reference number location of safety
and referent equipment or Fire equipment Mandatory action
Prohibition signs Warning signs
(E)
safety facility,
ISO 7010:2011/Amd.4:2013(E) signs signs
ISO 7010:2011/Amd.4:2013(E)
Referent Referent
Lifebuoy with line Lower rescue boat to the water
in launch sequence
Function
Safety sign — —
To indicate the location of a lifebuoy with line — Function — —
Image content To signify that the rescue boat must be lowered in
launch sequence
Ring buoy with four becketed lines and attached seg-
mented line Image content
Boat on two falls, two upper human figures, one of
them outlined, arrow pointing down, two wavy lines
(E)
Reference number Hazard
E041
—
Not being able to locate a lifebuoy with line — Hazard
M041
— —
Rescue boat is not lowered to the water at the appropriate time —
Human behaviour that is intended to be caused after understandingISO
the 7010:2011/Amd.4:2013(E)
safety sign’s meaning
Lower rescue boat to
Human behaviour that is intended to be caused after understandingISO
the7010:2011/Amd.4:2013(E)
safety sign’s meaning
Referent Lifebuoy —
with line
Being aware of the location of a lifebuoy with line
Related referents
— the water—in launch
Lowering the rescue boat at the appropriate time
Related referents
— —
sequence
ISO 7010-E040, ISO 7010-E042, ISOSafety
7010-E043
sign E042: Lifebuoy with light ISO 7010-E037
Safety sign M042: Release falls in launch sequence
nal Additional information Additional information
Reference No.
tly, Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall Test data obtained according to ISO 9186-1:2007 are notReference No.
available. Consequently, a supplementary text sign
by
ISO 7010‑E042
be used to increase comprehension except when the safety sign is supplemented
training.
by manuals, instructions or
ISO 7010‑M042
shall be used to increase comprehension except when the safety sign is supplemented
or training.
by manuals, instructions
ed Referent Referent
Lifebuoy with light Release falls in launch sequence
Function
Safety sign
Function
— —
To indicate the location of a lifebuoy with light — —
To signify that the lifeboat or rescue boat falls must be
released in launch sequence
—
Image content
Image content
Ring buoy with four becketed lines and attached light
ith Hook on pivot attached to two sloping lines, curved
arrow pointing in anticlockwise direction from a
U-shape
Referent — light
Lifebuoy with — — falls in
Release — —
http://qstandard.org/
Being aware of the location of a lifebuoy with light Releasing falls at the appropriate time
Related referents Related referents
11
Additional information
Safety
ISO 7010-E040, ISO 7010-E041, sign E043: Lifebuoy with line and light
ISO 7010-E043 — launch sequence
Safety sign M043: Start water spray in launch sequence
Additional information
16 Reference No. © ISO 2013 – All rights reserved 46 Reference No. © ISO 2013 – All rights reserved
ns Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
ISO 7010‑E043
be used to increase comprehension except when the safety sign is supplemented
training.
by manuals, instructions or
ISO 7010‑M043
shall be used to increase comprehension except when the safety sign is supplemented
or training.
by manuals, instructions
Referent Referent
Lifebuoy with line and light Start water spray in launch sequence
Function Function
Safety sign — —
To indicate the location of a lifebuoy with line and light — —
To signify that the water spray system for a lifeboat
must be energized in launch sequence
—
Image content
Ring buoy with four becketed lines and attached seg- Image content
mented line and light Nozzle and dotted lines above lifeboat
Related referents Energizing the water spray system at the appropriate time
11
be
and light
ISO 7010-E40, ISO 7010-E41, ISO 7010-042
Safety sign E044: Lifejacket
Additional information
launch sequence
Related referents
Safety sign M044: Start air supply in launch sequence
ISO 7010-E036, ISO 7010-M039
© ISO 2013 – All rights reserved 17 ©Additional
ISO 2013 – All rights reserved
information Reference No. 47
Test data obtained according to ISO 9186-1:2007 are not Reference No.
available. Consequently, a supplementary sign shall
training.
ISO 7010‑E044
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
ISO 7010‑M044
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Referent Referent
Lifejacket Start air supply in launch sequence
Function Function
Safety sign — —
To indicate the location of a lifejacket — —
To signify that the self-contained air support system
must be energized in launch sequence
—
Image content
Image content
Lifejacket
Bellows with three arrows at the nozzle pointing away
in a radial pattern
Function
Safety sign
Function
— —
To indicate the location of a child’s lifejacket — —
To signify that the lifeboat gripes must be released in
launch sequence
—
Image content
Lifejacket with walking child on one lobe Image content
Lifeboat suspended on a fall in a davit with a gripe sur-
rounding the boat; arrow pointing at the release point
of the gripe
Referent —
Child’s lifejacket
Being aware of the location of a child’s lifejacket
Related referents
— gripes —
Releasing the gripes of a lifeboat at the appropriate time
in launch
Related referents
— —
sequence
ISO 7010-E044, ISO 7010-E046 ISO 7010-E036, ISO 7010-M039
Additional information Additional information
© ISO 2013 – All rights reserved 19 © ISO 2013 – All rights reserved 49
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
training. or training.
Table 2 (continued)
Category
E F M P W
Safety sign, Evacuation route,
reference number location of safety
and referent equipment or Fire equipment Mandatory action
Prohibition signs Warning signs
safety facility, signs
ISO 7010:2011/Amd.4:2013(E) signs ISO 7010:2011/Amd.5:2014(E)
safety action (safe
condition signs)
Safety sign E046: Infant’s lifejacket Safety sign M046: Secure gas cylinders
Reference No. Reference No.
ISO 7010‑E046
ISO 7010‑M046
Referent Referent
Infant’s lifejacket Secure gas cylinders
Function
Safety sign — —
To indicate the location of an infant’s lifejacket — Function
—
To signify that gas cylinders must be secured
—
Image content Image content
Lifejacket with infant in diaper on one lobe Upper part of gas cylinder, chain
Referent Referent
Search and rescue transponder Use self‑contained breathing appliance
Function
Safety sign — —
To indicate the location of a search and rescue tran- — Function
—
To signify that a self-contained breathing appliance —
sponder (SART) must be used
Image content Image content
Transponder with arrow pointing towards antenna Upper human figure (left-hand profile) wearing a com-
and a arrow pointing away pressed air cylinder and mask connected by a tube
http://qstandard.org/
Being aware of the location of a SART
breathing
Using a self-contained breathing appliance
Related referents Related referents
—
transponder
Safety sign E048: Survival craft distress signals
Additional information appliance
ISO 7010-M017 Safety sign M048: Use gas detector
© ISO 2013 – All rights reserved 21 Additional information
Reference No. © ISO 2014 – All rights reserved Reference No. 5
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
ISO 7010‑E048
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training. ISO 7010‑M048
shall be used to increase comprehension except when the safety sign is supplemented
or training.
by manuals, instructions
Referent Referent
Survival craft distress signal Use gas detector
Function
Safety sign — —
To indicate the location of a survival craft distress
signal
—
Function
—
To signify that a gas detector must be used —
Image content
Image content
Front of a block with a small cylinder on top and on the
Bursting star at the end of a curved path of diminish- front plane a curved scale with markers and pointer;
ing width three curved arrows; three lines with several curves
Referent — craft
Survival —
Being aware of the location of a survival craft distress signal
Related referents
—
Use gas detector
Using a gas detector — —
Related referents
distress signal
ISO 7010-E049 Safety sign E049: Rocket parachute flare
Additional information
— Safety sign M049: Wear protective roller sport equipment
22 © ISO 2013 – All rights reserved Additional information
Test data obtained according to ISO 9186-1:2007 are notReference No. 6 © ISO 2014 – All rights reserved
available. Consequently, a supplementary sign shall Test data obtained according to ISO 9186-1:2007 are not Reference No.
available. Consequently, a supplementary text sign
ISO 7010‑E049
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training. ISO 7010‑M049
shall be used to increase comprehension except when the safety sign is supplemented
or training.
by manuals, instructions
Referent Referent
Rocket parachute flare Wear protective roller sport equipment
Function
Safety sign — —
To indicate the location of a rocket parachute flare — Function
—
To signify that protective roller sport equipment must
—
Image content be worn
Bursting star suspended from a parachute Image content
Human figure wearing head, wrist, palm, knee and
elbow protectors
Additional
flare
ISO 7010-E048 Safety sign E050: Line‑throwing appliance
information
—sport equipment
© ISO 2013 – All rights reserved 23 Additional information 7
Reference No. © ISO 2014 – All rights reserved
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
ISO by
be used to increase comprehension except when the safety sign is supplemented 7010‑E050
manuals, instructions or
training.
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Referent
Line‑throwing appliance
Function
Safety sign — —
To indicate the location of a line-throwing appliance — — —
Image content
Barrel-mounted rocket with attached segmented line
Referent —
Line-throwing
Being aware of the location of a line-throwing appliance
Related referents
— — — —
—
appliance
Additional information
24 © ISO 2013 – All rights reserved
8 © ISO 2014 – All rights reserved
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Table 2 (continued)
Category
E F M P W
Safety sign, Evacuation route,
reference number location of safety
and referent equipment or Fire equipment Mandatory action
Prohibition signs Warning signs
safety facility,
ISO 7010:2011/Amd.4:2013(E) signs signs
safety action (safe
condition Safety signsigns)
E051: Two‑way VHF radiotelephone apparatus
Reference No.
ISO 7010‑E051
Referent
Two‑way VHF radiotelephone apparatus
Function
Safety sign — —
To indicate the location of a two-way VHF
radiotelephone apparatus
— — —
Image content
Hand holding radiotelephone with three-prong
antenna, three curved lines on each side
Referent —
Being aware of the location of a two-way VHF radiotelephone apparatus
radiotelephone
Related referents
— — — —
apparatus
— Safety sign E052: Emergency position indicating radio beacon
Additional information
Reference No.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
ISOby
be used to increase comprehension except when the safety sign is supplemented 7010‑E052
manuals, instructions or
training.
Referent
Emergency position indicating radio beacon
Function
Safety sign — —
To indicate the location of an emergency position indi- — — —
cating radio beacon (EPIRB)
Image content
Radio beacon with three-prong antenna, three curved
lines on each side
Referent — radio — — — —
http://qstandard.org/
Being aware of the location of an EPIRB
indicating
Related referents
Referent
Embarkation ladder
Function
Safety sign — —
To indicate the location of an embarkation ladder — — —
Image content
Ladder (six horizontal lines between two parallel ver-
tical lines), two wavy lines
Referent —
Embarkation
Being aware of the location of an embarkation ladder
Related referents
— — — —
—
ladder
Safety sign E054: Marine evacuation slide
Additional information
© ISO 2013 – All rights reserved
Reference No. 27
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
ISOby
be used to increase comprehension except when the safety sign is supplemented 7010‑E054
manuals, instructions or
training.
Referent
Marine evacuation slide
Function
Safety sign — —
To indicate the location of a marine evacuation slide — — —
Image content
Slide terminating in open raft, two wavy lines
Referent —
Marine evacuation
Being aware of the location of a marine evacuation slide
Related referents
— — — —
slide
ISO 7010-E055 Safety sign E055: Marine evacuation chute
Additional information
28 © ISO 2013 – All rights reserved
Reference No.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
ISO 7010‑E055
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Referent
Marine evacuation chute
Function
Safety sign — —
To indicate the location of a marine evacuation chute — — —
Image content
Chute, liferaft, two wavy lines
Referent —
Marine evacuation
Being aware of the location of a marine evacuation chute
Related referents
— — — —
chute
ISO 7010-E054
Additional information
© ISO 2013 – All rights reserved 29
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Table 2 (continued)
Category
E F M P W
Safety sign, Evacuation route,
reference number location of safety
and referent equipment or Fire equipment Mandatory action
Prohibition signs Warning signs
safety facility, signs
ISO 7010:2011/Amd.4:2013(E) signs
safety action (safe
condition signs)
Safety sign E056: Survival clothing
Reference No.
ISO 7010‑E056
Referent
Survival clothing
Function
Safety sign — —
To indicate the location of survival clothing — — —
Image content
Standing full body survival suit with hood
Referent —
Survival clothing
Being aware of the location of survival clothing
Related referents
— — — —
— Safety sign E057: Door opens by pulling on the left‑hand side
Additional information
Reference No.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
ISO 7010‑E057
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Referent
Door opens by pulling
on the left‑hand side
Referent — — — — —
http://qstandard.org/
Being aware that the door opens by pulling on the left-hand side
pulling on the
Related referents
left-hand side
Safety sign E058: Door opens by pulling on the right‑hand side
ISO 7010-E022, ISO 7010-E023, ISO 7010-E033, ISO 7010-E034, ISO 7010-E058
Additional information
© ISO 2013 – All rights reserved Reference No. 31
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
ISO 7010‑E058
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Referent
Door opens by pulling
on the right‑hand side
Referent
Escape ladder
Function
Safety sign — —
To indicate the location of a permanently fixed escape
ladder
— — —
Image content
Ladder (six horizontal lines between two parallel
vertical lines)
Referent Escape —
ladder
Being aware of the location of a fixed escape ladder
Related referents
— — — —
ISO 7010-E016, ISO 7010-E053, ISO Safety
7010-F003
sign E060: Evacuation chair
Additional information
© ISO 2013 – All rights reserved 33
Reference No.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
ISO 7010‑E060
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Referent
Evacuation chair
Function
Safety sign — —
To indicate the location of an evacuation chair — — —
Image content
Human figure sitting in an evacuation chair, human
figure handling the evacuation chair, staircase (all
right-hand profile)
Referent — chair
Evacuation
Being aware of the location of an evacuation chair
Related referents
— — — —
—
Additional information
© ISO 2014 – All rights reserved 3
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 3 — Description and application of referent for signs indicating an evacuation route, the location
of safety equipment or a safety facility, or a safety action (safe condition signs) (category E)
Reference No.
ISO 7010-E001
Referent
Function
To indicate an escape route to a place of safety
Image content
Human figure moving (to the left) through doorway
http://qstandard.org/
Hazard
Not being able to locate an escape route to a place of safety which is provided for evacuation in the event of an
emergency
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Being aware of the location of an escape route to a place of safety in the event of an emergency
Related referents
ISO 7010-E002, ISO 7010-E016, ISO 7010-E017
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. However, this safety sign has been the subject of
extensive research in Japan and the design selected has received the best comprehension results. A supplementary text
sign shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Supplementary arrow sign (type D of ISO 3864-3) in white on green to be used to give directional information (direction
examples, the arrows may be rotated in increments of 45°):
14
© ISO 2014 – All rights reserved 21
© ISO 2011 – All rights reserved
BS EN ISO 7010:2012+A5:2015 BS EN ISO
BS EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
ISO 7010:2011(E)
Table 3 (continued)
Reference No.
ISO 7010-E002
Referent
Function
To indicate an escape route to a place of safety
Image content
Human figure moving (to the right) through doorway
Hazard
Not being able to locate an escape route to a place of safety which is provided for evacuation in the event of an
emergency
http://qstandard.org/
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Being aware of the location of an escape route to a place of safety in the event of an emergency
Related referents
ISO 7010-E001, ISO 7010-E016, ISO 7010-E017
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. However, this safety sign has been the subject of
extensive research in Japan and the design selected has received the best comprehension results. A supplementary text
sign shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Supplementary arrow sign (type D of ISO 3864-3) in white on green to be used to give directional information (direction
examples, the arrows may be rotated in increments of 45°):
Table 3 (continued)
Reference No.
ISO 7010-E003
Referent
First aid
Function
To indicate the location of first aid equipment or facilities or
staff
Image content
First aid cross
Hazard
Not being able to locate first aid equipment or facilities or staff in the event of injury or emergency
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Being aware of the location of first aid equipment or facilities or staff
ISO 7010-E004, ISO 7010-E009, ISO 7010-E010, ISO 7010-E011, ISO 7010-E012, ISO 7010-E013
Additional information
This safety sign should be used for first aid equipment or facilities or staff for which/whom there is no registered safety sign.
The first aid cross may be replaced with another element appropriate to cultural requirements.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
16
© ISO 2014 – All rights reserved 23
© ISO 2011 – All rights reserved
BS EN ISO 7010:2012+A5:2015 BS EN ISO
BS EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
ISO 7010:2011(E)
Table 3 (continued)
Reference No.
ISO 7010-E004
Referent
Emergency telephone
Function
To indicate the location of an emergency telephone
Image content
Telephone receiver (profile), first aid cross
Hazard
Not being able to locate a telephone which is provided for use in the event of an emergency
Human behaviour that is intended to be caused after understanding the safety sign's meaning
ISO 7010-E003, ISO 7010-E009, ISO 7010-E010, ISO 7010-E011, ISO 7010-E012, ISO 7010-E013, ISO 7010-F006
Additional information
The first aid cross may be replaced with another element appropriate to cultural requirements.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 3 (continued)
Reference No.
ISO 7010-E005
Referent
Direction,
arrow (90° increments),
safe condition
withdrawn
Function
Image content
Hazard
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Additional information
This sign has been withdrawn as a registered safety sign, since it is to be used as a supplementary sign only.
18
© ISO 2014 – All rights reserved 25
© ISO 2011 – All rights reserved
BS EN ISO 7010:2012+A5:2015 BS EN ISO
BS EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
ISO 7010:2011(E)
Table 3 (continued)
Reference No.
ISO 7010-E006
Referent
Direction,
45° arrow (90° increments),
safe condition
withdrawn
Function
Image content
Hazard
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Table 3 (continued)
Reference No.
ISO 7010-E007
Referent
Function
To indicate the location of a safe assembly point following
evacuation
Image content
Two human figures and a head of a third figure in a group,
four arrows coming from the corners pointing to them
Hazard
Not being able to locate a safe assembly point following evacuation
Human behaviour that is intended to be caused after understanding the safety sign's meaning
http://qstandard.org/
Being aware of the evacuation assembly point which is provided to enable people to be accounted for following the
evacuation of a building or premises
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign did not reach the criteria of acceptability. Consequently, a
supplementary text sign shall be used to increase comprehension except when the safety sign is supplemented by manuals,
instructions or training.
20
© ISO 2014 – All rights reserved 27
© ISO 2011 – All rights reserved
BS EN ISO 7010:2012+A5:2015 BS EN ISO
BS EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
ISO 7010:2011(E)
Table 3 (continued)
Reference No.
ISO 7010-E008
Referent
Function
To indicate a cover which requires breaking to obtain
access to an emergency exit device
Image content
Human fist and lower arm (outlined) holding a bar, uneven
star shape
Hazard
Not being able to open an emergency exit device
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Breaking the cover to gain access to the device that operates an emergency exit in the event of an emergency
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign did not reach the criteria of acceptability. Consequently, a
supplementary text sign shall be used to increase comprehension except when the safety sign is supplemented by manuals,
instructions or training.
Table 3 (continued)
Reference No.
ISO 7010-E009
Referent
Doctor
Function
To indicate the location of a doctor for emergencies
Image content
Upper human figure with stethoscope, first aid cross
Hazard
Not being able to locate an emergency doctor
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Being aware of the location of an emergency doctor
ISO 7010-E003, ISO 7010-E004, ISO 7010-E010, ISO 7010-E011, ISO 7010-E012, ISO 7010-E013
Additional information
The first aid cross may be replaced with another element appropriate to cultural requirements.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
22
© ISO 2014 – All rights reserved 29
© ISO 2011 – All rights reserved
BS EN ISO 7010:2012+A5:2015 BS EN ISO
BS EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
ISO 7010:2011(E)
Table 3 (continued)
Reference No.
ISO 7010-E010
Referent
Function
To indicate the location of an automated external heart
defibrillator
Image content
Heart with lightning bolt in the middle, first aid cross
Hazard
Not being able to locate an automated external heart defibrillator
Human behaviour that is intended to be caused after understanding the safety sign's meaning
ISO 7010-E003, ISO 7010-E004, ISO 7010-E009, ISO 7010-E011, ISO 7010-E012, ISO 7010-E013
Additional information
The first aid cross may be replaced with another element appropriate to cultural requirements of the target group.
Test data obtained according to ISO 9186-1:2007 are available from more than one country. Findings from testing
showed that the safety sign did not reach the criteria of acceptability. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 3 (continued)
Reference No.
ISO 7010-E011
Referent
Eyewash station
Function
To indicate the location of an eyewash station
Image content
Eye above running water coming out of a shower head, first
aid cross
Hazard
Not being able to locate an eyewash station
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Being aware of the location of an eyewash station
ISO 7010-E003, ISO 7010-E004, ISO 7010-E009, ISO 7010-E010, ISO 7010-E012, ISO 7010-E013
Additional information
The first aid cross may be replaced with another element appropriate to cultural requirements of the target group.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
24
© ISO 2014 – All rights reserved 31
© ISO 2011 – All rights reserved
BS EN ISO 7010:2012+A5:2015 BS EN ISO
BS EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
ISO 7010:2011(E)
Table 3 (continued)
Reference No.
ISO 7010-E012
Referent
Safety shower
Function
To indicate the location of a safety shower
Image content
Human figure under running water coming out of a shower
head, first aid cross
Hazard
Not being able to locate a safety shower
Human behaviour that is intended to be caused after understanding the safety sign's meaning
ISO 7010-E003, ISO 7010-E004, ISO 7010-E009, ISO 7010-E010, ISO 7010-E011, ISO 7010-E013
Additional information
The first aid cross may be replaced with another element appropriate to cultural requirements of the target group.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 3 (continued)
Reference No.
ISO 7010-E013
Referent
Stretcher
Function
To indicate the location of a stretcher
Image content
Human figure on a stretcher, first aid cross
Hazard
Not being able to locate a stretcher
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Being aware of the location of a stretcher
ISO 7010-E003, ISO 7010-E004, ISO 7010-E009, ISO 7010-E010, ISO 7010-E011, ISO 7010-E012
Additional information
The first aid cross may be replaced with another element appropriate to cultural requirements of the target group.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
26
© ISO 2014 – All rights reserved 33
© ISO 2011 – All rights reserved
BS EN ISO 7010:2012+A5:2015
ISO 7010:2011/Amd.2:2012(E)
EN ISO 7010:2012+A5:2015 (E)
Table 3 (continued)
Safety sign E014: Child seat presence and orientation detection system (CPOD)
Reference No.
ISO 7010-E014
Referent
Child seat presence and orientation de-
tection system (CPOD)
Function
To indicate that a CPOD-equipped child seat can
safely be used on a CPOD-equipped passenger seat
protected by a frontal airbag
Image content
Vehicle passenger seat, child in rear-facing child seat,
dot, three curved lines of increasing size radiating from
the dot, filled semi-circle
Hazard
Without a CPOD system, a fully powered vehicle airbag can injure a child in a child seat when the airbag is deployed.
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
—
Additional information
This safety sign will be used along with a supplementary sign as part of a label for CPOD-equipped child seats or for
vehicles equipped with the CPOD sensing system. These two signs are part of ISO/TS 22239-3.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
TableE015:
Safety sign 3 (continued)
Drinking water
Reference No.
ISO 7010-E015
Referent
Drinking water
Function
To indicate the location of drinking water
Image content
Tap above glass, two wavy lines
Hazard
Not being able to locate drinking water
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
http://qstandard.org/
Being aware of the location of a water supply that is suitable for drinking
Related referents
ISO 7010-P005
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 3 (continued)
Reference No.
ISO 7010-E016
Referent
Function
To indicate the location of an emergency window for escape
with a permanently fixed escape ladder
Image content
Human figure, window and a ladder on the left
Hazard
Not being able to locate an emergency window for escape in the event of an emergency
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Being aware of the location of an emergency window in the event of an emergency
Related referents
http://qstandard.org/
ISO 7010-E001, ISO 7010-E002, ISO 7010-E017
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 3 (continued)
Reference No.
ISO 7010-E017
Referent
Rescue window
Function
To indicate the location of a rescue window where people
can be rescued by a ladder by intervention forces
Image content
Human figure, window, firefighting vehicle with ladder
Hazard
Not being able to locate a rescue window to be rescued by intervention forces in the event of an emergency evacuation
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Being aware of the location of a rescue window
Related referents
http://qstandard.org/
ISO 7010-E001, ISO 7010-E002, ISO 7010-E016
Additional information
This safety sign has to be placed inside the building.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
28
© ISO 2014 – All rights reserved 37
© ISO 2011 – All rights reserved
BS EN ISO 7010:2012+A5:2015 BS EN ISO
BS EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
ISO 7010:2011(E)
Table 3 (continued)
Reference No.
ISO 7010-E018
Referent
Function
To signify that the doorknob of a security door on an
escape route must be turned in an anticlockwise direction in
order for the opening device to operate
Image content
Doorknob with semicircular anticlockwise arrow
Hazard
Being unable to open a door on an escape route which has a security lock and an emergency opening device, in the
event of an emergency
Human behaviour that is intended to be caused after understanding the safety sign's meaning
http://qstandard.org/
Turning the doorknob in an anticlockwise direction in order to open a door on an escape route which has a security lock,
in the event of an emergency
Related referents
ISO 7010-E019
Additional information
This safety sign is intended to be used only on doors with a security locking mechanism.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 3 (continued)
Reference No.
ISO 7010-E019
Referent
Function
To signify that the doorknob of a security door on an
escape route must be turned in a clockwise direction in
order for the opening device to operate
Image content
Doorknob with semicircular clockwise arrow
Hazard
Being unable to open a door on an escape route which has a security lock and an emergency opening device, in the
event of an emergency
Human behaviour that is intended to be caused after understanding the safety sign's meaning
http://qstandard.org/
Turning the doorknob in a clockwise direction in order to open a door on an escape route which has a security lock, in
the event of an emergency
Related referents
ISO 7010-E018
Additional information
This safety sign is intended to be used only on doors with a security locking mechanism.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
30
© ISO 2014 – All rights reserved 39
© ISO 2011 – All rights reserved
BS EN ISO 7010:2012+A5:2015
ISO 7010:2011/Amd.2:2012(E)
EN ISO 7010:2012+A5:2015 (E)
Reference No.
ISO 7010-E020
Referent
Emergency stop button
Function
To indicate the location of an emergency stop button
Image content
Hand over button shape, two lines
Hazard
Not being able to locate an emergency stop button
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
—
http://qstandard.org/
Being aware of the location of an emergency stop button
Additional information
The actuator of the emergency stop device itself is likely to be coloured red (see e.g. ISO 13850, IEC 60601-1).
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Reference No.
ISO 7010-E022
Referent
Door opens by pushing on
the left-hand side
Function
To indicate that the door opens by pushing on the
left-hand side
Image content
Doorway with door opening outwards, curved arrow
pointing to the left
Hazard
Not being able to open the door
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
http://qstandard.org/
Being aware that the door opens by pushing on the left-hand side
Related referents
ISO 7010-E023, ISO 7010-E033, ISO 7010-E034, ISO 7010-E057, ISO 7010-E058
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Referent
Door opens by pushing on
the right-hand side
Function
To indicate that the door opens by pushing on the
right-hand side
Image content
Doorway with door opening outwards, curved arrow
pointing to the right
Hazard
Not being able to open the door
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
http://qstandard.org/
Being aware that the door opens by pushing on the right-hand side
Related referents
ISO 7010-E022, ISO 7010-E033, ISO 7010-E034, ISO 7010-E057, ISO 7010-E058
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 3 (continued)
Safety sign E024: Evacuation temporary refuge
Reference No.
ISO 7010‑E024
Referent
Evacuation temporary refuge
Function
To indicate the location of a temporary safe area
(refuge) to await rescue assistance, provided for those
unable to use stairs in the event of an emergency
evacuation
Image content
Human figure in wheelchair (profile), four white
arrows coming from the corners pointing to it
Hazard
Not being able to locate an area provided for temporary waiting for rescue assistance for those unable to use
stairs in the event of an emergency evacuation
http://qstandard.org/
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Being aware of the location of an area provided for temporary waiting for rescue assistance for those unable to
use stairs in the event of an emergency evacuation
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from
national testing, however, showed that in one country the safety sign did not reach the criteria of acceptability.
Consequently, a supplementary text sign shall be used to increase comprehension except when the safety sign
is supplemented by manuals, instructions or training.
Table 3 (continued)
Safety sign E027: Medical grab bag
Reference No.
ISO 7010‑E027
Referent
Medical grab bag
Function
To indicate the location of a medical grab bag
Image content
Bag (outlined) with handles, first aid cross
Hazard
Not being able to locate a medical grab bag
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
ISO 7010-E003, ISO 7010-E004, ISO 7010-E009, ISO 7010-E010, ISO 7010-E011, ISO 7010-E012, ISO 7010-E013,
ISO 7010-E028, ISO 7010-E029
Additional information
The first aid cross may be replaced with another element appropriate to cultural requirements of the target
group.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 3 (continued)
Safety sign E028: Oxygen resuscitator
Reference No.
ISO 7010‑E028
Referent
Oxygen resuscitator
Function
To indicate the location of an oxygen resuscitator
Image content
Oxygen cylinder with manual control, hose line and
mask, first aid cross
Hazard
Not being able to locate an oxygen resuscitator
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referentshttp://qstandard.org/
Being aware of the location of an oxygen resuscitator
ISO 7010-E003, ISO 7010-E004, ISO 7010-E009, ISO 7010-E010, ISO 7010-E011, ISO 7010-E012, ISO 7010-E013,
ISO 7010-E027, ISO 7010-E029
Additional information
The first aid cross may be replaced with another element appropriate to cultural requirements of the target
group.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 3 (continued)
Safety sign E029: Emergency escape breathing device
Reference No.
ISO 7010‑E029
Referent
Emergency escape breathing device
Function
To indicate the location of an emergency escape
breathing device (EEBD)
Image content
Full-face mask with regulator (front view), first aid
cross
Hazard
Not being able to locate an EEBD
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
ISO 7010-E003, ISO 7010-E004, ISO 7010-E009, ISO 7010-E011, ISO 7010-E012, ISO 7010-E027, ISO 7010-E028
Additional information
The first aid cross may be replaced with another element appropriate to cultural requirements of the target
group.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 3 (continued)
Safety sign E031: Shipboard general alarm
Reference No.
ISO 7010‑E031
Referent
Shipboard general alarm
Function
To indicate the location of a general alarm button on
board ship
Image content
Circle in a square (outlined)
Hazard
Not being able to locate a general alarm button on board ship
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
ISO 7010-F005
http://qstandard.org/
Crew being aware of the location of a general alarm button
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 3 (continued)
Safety sign E032: Shipboard assembly station
Reference No.
ISO 7010‑E032
Referent
Shipboard assembly station
Function
To indicate the location of an assembly station on
board ship
Image content
Five human figures in different sizes standing on a
square, four arrows coming from the corners pointing
to them
Hazard
Not being able to locate an assembly station on board ship
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
ISO 7010-E007
http://qstandard.org/
Being aware of the location of an assembly station on board ship
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Table 3 (continued)
Safety sign E033: Door slides right to open
Reference No.
ISO 7010‑E033
Referent
Door slides right to open
Function
To indicate the direction in which a sliding door opens
Image content
Rectangle bordered top and bottom, arrow pointing to
the right
Hazard
Not being able to determine the direction of movement of a sliding door
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referentshttp://qstandard.org/
Being able to discern a sliding door which opens to the right
ISO 7010-E022, ISO 7010-E023, ISO 7010-E034, ISO 7010-E057, ISO 7010-E058
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Table 3 (continued)
Safety sign E034: Door slides left to open
Reference No.
ISO 7010‑E034
Referent
Door slides left to open
Function
To indicate the direction in which a sliding door opens
Image content
Rectangle bordered top and bottom, arrow pointing to
the left
Hazard
Not being able to determine the direction of movement of a sliding door
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
ISO 7010-E022, ISO 7010-E023, ISO 7010-E033, ISO 7010-E057, ISO 7010-E058
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Table 3 (continued)
Safety sign E035: Liferaft knife
Reference No.
ISO 7010‑E035
Referent
Liferaft knife
Function
To indicate the location of a liferaft knife
Image content
Liferaft knife (with rounded tip and drilled-out holes
in blade) between sliced braided rope
Hazard
Not being able to locate a liferaft knife
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
—
http://qstandard.org/
Being aware of the location of a liferaft knife
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 3 (continued)
Safety sign E036: Lifeboat
Reference No.
ISO 7010‑E036
Referent
Lifeboat
Function
To indicate the location of a lifeboat
Image content
Lifeboat, two wavy lines
Hazard
Not being able to locate a lifeboat
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Table 3 (continued)
Safety sign E037: Rescue boat
Reference No.
ISO 7010‑E037
Referent
Rescue boat
Function
To indicate the location of a rescue boat
Image content
Boat, two upper human figures, one of them outlined,
two wavy lines
Hazard
Not being able to locate a rescue boat
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
ISO 7010-M041
http://qstandard.org/
Being aware of the location of a rescue boat
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Table 3 (continued)
Safety sign E038: Liferaft
Reference No.
ISO 7010‑E038
Referent
Liferaft
Function
To indicate the location of a liferaft
Image content
Liferaft, two wavy lines
Hazard
Not being able to locate a liferaft
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Table 3 (continued)
Safety sign E039: Davit‑launched liferaft
Reference No.
ISO 7010‑E039
Referent
Davit‑launched liferaft
Function
To indicate the location of a davit-launched liferaft
Image content
Liferaft suspended from single point davit
Hazard
Not being able to locate a davit-launched liferaft
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referentshttp://qstandard.org/
Being aware of the location of a davit-launched liferaft
Table 3 (continued)
Safety sign E040: Lifebuoy
Reference No.
ISO 7010‑E040
Referent
Lifebuoy
Function
To indicate the location of a lifebuoy
Image content
Ring buoy with four becketed lines
Hazard
Not being able to locate a lifebuoy
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Table 3 (continued)
Safety sign E041: Lifebuoy with line
Reference No.
ISO 7010‑E041
Referent
Lifebuoy with line
Function
To indicate the location of a lifebuoy with line
Image content
Ring buoy with four becketed lines and attached seg-
mented line
Hazard
Not being able to locate a lifebuoy with line
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referentshttp://qstandard.org/
Being aware of the location of a lifebuoy with line
Table 3 (continued)
Safety sign E042: Lifebuoy with light
Reference No.
ISO 7010‑E042
Referent
Lifebuoy with light
Function
To indicate the location of a lifebuoy with light
Image content
Ring buoy with four becketed lines and attached light
Hazard
Not being able to locate a lifebuoy with light
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Table 3 (continued)
Safety sign E043: Lifebuoy with line and light
Reference No.
ISO 7010‑E043
Referent
Lifebuoy with line and light
Function
To indicate the location of a lifebuoy with line and light
Image content
Ring buoy with four becketed lines and attached seg-
mented line and light
Hazard
Not being able to locate a lifebuoy with line and light
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referentshttp://qstandard.org/
Being aware of the location of a lifebuoy with line and light
Table 3 (continued)
Safety sign E044: Lifejacket
Reference No.
ISO 7010‑E044
Referent
Lifejacket
Function
To indicate the location of a lifejacket
Image content
Lifejacket
Hazard
Not being able to locate a lifejacket
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Table 3 (continued)
Safety sign E045: Child’s lifejacket
Reference No.
ISO 7010‑E045
Referent
Child’s lifejacket
Function
To indicate the location of a child’s lifejacket
Image content
Lifejacket with walking child on one lobe
Hazard
Not being able to locate a child’s lifejacket
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referentshttp://qstandard.org/
Being aware of the location of a child’s lifejacket
Table 3 (continued)
Safety sign E046: Infant’s lifejacket
Reference No.
ISO 7010‑E046
Referent
Infant’s lifejacket
Function
To indicate the location of an infant’s lifejacket
Image content
Lifejacket with infant in diaper on one lobe
Hazard
Not being able to locate an infant’s lifejacket
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Table 3 (continued)
Safety sign E047: Search and rescue transponder
Reference No.
ISO 7010‑E047
Referent
Search and rescue transponder
Function
To indicate the location of a search and rescue tran-
sponder (SART)
Image content
Transponder with arrow pointing towards antenna
and a arrow pointing away
Hazard
Not being able to locate a SART
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
—
http://qstandard.org/
Being aware of the location of a SART
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Table 3 (continued)
Safety sign E048: Survival craft distress signals
Reference No.
ISO 7010‑E048
Referent
Survival craft distress signal
Function
To indicate the location of a survival craft distress
signal
Image content
Bursting star at the end of a curved path of diminish-
ing width
Hazard
Not being able to locate a survival craft distress signal
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
ISO 7010-E049
http://qstandard.org/
Being aware of the location of a survival craft distress signal
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Table 3 (continued)
Safety sign E049: Rocket parachute flare
Reference No.
ISO 7010‑E049
Referent
Rocket parachute flare
Function
To indicate the location of a rocket parachute flare
Image content
Bursting star suspended from a parachute
Hazard
Not being able to locate a rocket parachute flare
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
ISO 7010-E048
http://qstandard.org/
Being aware of the location of a rocket parachute flare
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Table 3 (continued)
Safety sign E050: Line‑throwing appliance
Reference No.
ISO 7010‑E050
Referent
Line‑throwing appliance
Function
To indicate the location of a line-throwing appliance
Image content
Barrel-mounted rocket with attached segmented line
Hazard
Not being able to locate a line-throwing appliance
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
—
http://qstandard.org/
Being aware of the location of a line-throwing appliance
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Table 3 (continued)
Safety sign E051: Two‑way VHF radiotelephone apparatus
Reference No.
ISO 7010‑E051
Referent
Two‑way VHF radiotelephone apparatus
Function
To indicate the location of a two-way VHF
radiotelephone apparatus
Image content
Hand holding radiotelephone with three-prong
antenna, three curved lines on each side
Hazard
Not being able to locate a two-way VHF radiotelephone apparatus
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
—
http://qstandard.org/
Being aware of the location of a two-way VHF radiotelephone apparatus
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Table 3 (continued)
Safety sign E052: Emergency position indicating radio beacon
Reference No.
ISO 7010‑E052
Referent
Emergency position indicating radio beacon
Function
To indicate the location of an emergency position indi-
cating radio beacon (EPIRB)
Image content
Radio beacon with three-prong antenna, three curved
lines on each side
Hazard
Not being able to locate an EPIRB
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
—
http://qstandard.org/
Being aware of the location of an EPIRB
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Table 3 (continued)
Safety sign E053: Embarkation ladder
Reference No.
ISO 7010‑E053
Referent
Embarkation ladder
Function
To indicate the location of an embarkation ladder
Image content
Ladder (six horizontal lines between two parallel ver-
tical lines), two wavy lines
Hazard
Not being able to locate an embarkation ladder
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
—
http://qstandard.org/
Being aware of the location of an embarkation ladder
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Table 3 (continued)
Safety sign E054: Marine evacuation slide
Reference No.
ISO 7010‑E054
Referent
Marine evacuation slide
Function
To indicate the location of a marine evacuation slide
Image content
Slide terminating in open raft, two wavy lines
Hazard
Not being able to locate a marine evacuation slide
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
ISO 7010-E055
http://qstandard.org/
Being aware of the location of a marine evacuation slide
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Table 3 (continued)
Safety sign E055: Marine evacuation chute
Reference No.
ISO 7010‑E055
Referent
Marine evacuation chute
Function
To indicate the location of a marine evacuation chute
Image content
Chute, liferaft, two wavy lines
Hazard
Not being able to locate a marine evacuation chute
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
ISO 7010-E054
http://qstandard.org/
Being aware of the location of a marine evacuation chute
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Table 3 (continued)
Safety sign E056: Survival clothing
Reference No.
ISO 7010‑E056
Referent
Survival clothing
Function
To indicate the location of survival clothing
Image content
Standing full body survival suit with hood
Hazard
Not being able to locate survival clothing
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
—
http://qstandard.org/
Being aware of the location of survival clothing
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary sign shall
be used to increase comprehension except when the safety sign is supplemented by manuals, instructions or
training.
Table 3 (continued)
Safety sign E057: Door opens by pulling on the left‑hand side
Reference No.
ISO 7010‑E057
Referent
Door opens by pulling
on the left‑hand side
Function
To indicate that the door opens by pulling on the left-
hand side
Image content
Doorway with door opening inwards, curved arrow
pointing to the right
Hazard
Not being able to open the door
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referentshttp://qstandard.org/
Being aware that the door opens by pulling on the left-hand side
ISO 7010-E022, ISO 7010-E023, ISO 7010-E033, ISO 7010-E034, ISO 7010-E058
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 3 (continued)
Safety sign E058: Door opens by pulling on the right‑hand side
Reference No.
ISO 7010‑E058
Referent
Door opens by pulling
on the right‑hand side
Function
To indicate that the door opens by pulling on the right-
hand side
Image content
Doorway with door opening inwards, curved arrow
pointing to the left
Hazard
Not being able to open the door
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
ISO 7010-E022, ISO 7010-E023, ISO 7010-E033, ISO 7010-E034, ISO 7010-E057
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 3 (continued)
Safety sign E059: Escape ladder
Reference No.
ISO 7010‑E059
Referent
Escape ladder
Function
To indicate the location of a permanently fixed escape
ladder
Image content
Ladder (six horizontal lines between two parallel
vertical lines)
Hazard
Not being able to locate a fixed escape ladder and identify it as such
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referentshttp://qstandard.org/
Being aware of the location of a fixed escape ladder
Table 3 (continued)
Safety sign E060: Evacuation chair
Reference No.
ISO 7010‑E060
Referent
Evacuation chair
Function
To indicate the location of an evacuation chair
Image content
Human figure sitting in an evacuation chair, human
figure handling the evacuation chair, staircase (all
right-hand profile)
Hazard
Not being able to locate an evacuation chair
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
—
http://qstandard.org/
Being aware of the location of an evacuation chair
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 4 — Description and application of referent for fire equipment signs (category F)
Reference No.
ISO 7010-F001
Referent
Fire extinguisher
Function
To indicate the location of a fire extinguisher
Image content
Fire extinguisher (profile) with label, flame determinant
Hazard
Not being able to locate a fire extinguisher
Human behaviour that is intended to be caused after understanding the safety sign's meaning
http://qstandard.org/
Being aware of the location of a fire extinguisher
Related referents
ISO 7010-F002, ISO 7010-F003, ISO 7010-F004, ISO 7010-F005, ISO 7010-F006
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 4 (continued)
Reference No.
ISO 7010-F002
Referent
Function
To indicate the location of a fire hose reel
Image content
Seven vertical lines, one with a trapezoid underneath, circle
with cross and line attached to vertical bar, flame
determinant
Hazard
Not being able to locate a fire hose reel
Human behaviour that is intended to be caused after understanding the safety sign's meaning
ISO 7010-F001, ISO 7010-F003, ISO 7010-F004, ISO 7010-F005, ISO 7010-F006
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
32
78 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 4 (continued)
Reference No.
ISO 7010-F003
Referent
Fire ladder
Function
To indicate the location of a ladder that is to be used
exclusively for firefighting
Image content
Two converging vertical lines, six horizontal lines joining the
vertical lines, flame determinant
Hazard
Not being able to locate a fire ladder
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Being aware of the location of a fire ladder and recognizing that the use of this ladder is dedicated to firefighting only
ISO 7010-F001, ISO 7010-F002, ISO 7010-F004, ISO 7010-F005, ISO 7010-F006
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 4 (continued)
Reference No.
ISO 7010-F004
Referent
Function
To indicate the location of firefighting equipment
Image content
Fire helmet (profile), flame determinant
Hazard
Not being able to locate firefighting equipment
Human behaviour that is intended to be caused after understanding the safety sign's meaning
ISO 7010-F001, ISO 7010-F002, ISO 7010-F003, ISO 7010-F005, ISO 7010-F006
Additional information
This safety sign should be used for firefighting equipment for which there is no registered safety sign.
The fire helmet may be replaced with another fire helmet appropriate to cultural requirements.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
34
80 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 4 (continued)
Reference No.
ISO 7010-F005
Referent
Function
To indicate the location of a fire alarm call point
Image content
Hand (plan view) with one finger extended, dot in square
(outlined) broken at bottom, flame determinant
Hazard
Not being able to locate a fire alarm call point
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Being aware of the location of a fire alarm call point
ISO 7010-F001, ISO 7010-F002, ISO 7010-F003, ISO 7010-F004, ISO 7010-F006
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 4 (continued)
Reference No.
ISO 7010-F006
Referent
Function
To indicate the location of a fire emergency telephone
Image content
Telephone receiver (profile), flame determinant
Hazard
Not being able to locate a fire emergency telephone
Human behaviour that is intended to be caused after understanding the safety sign's meaning
ISO 7010-E004, ISO 7010-F001, ISO 7010-F002, ISO 7010-F003, ISO 7010-F004, ISO 7010-F005
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
36
82 2014 – All rights reserved
© ISO 2011
BS EN ISO 7010:2012+A5:2015
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011/Amd.4:2013(E)
Table 4 (continued)
Safety sign F008: Fixed fire extinguishing battery
Reference No.
ISO 7010‑F008
Referent
Fixed fire extinguishing battery
Function
To indicate the location of a fixed fire extinguishing
battery
Image content
Four bottles attached to a manifold, flame determinant
Hazard
Not being able to locate a fixed fire extinguishing battery
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referentshttp://qstandard.org/
Being aware of the location of a fixed fire extinguishing battery
ISO 7010-F001, ISO 7010-F002, ISO 7010-F003, ISO 7010-F004, ISO 7010-F005, ISO 7010-F006, ISO 7010-F007,
ISO 7010-F009, ISO 7010-F010, ISO 7010-F011, ISO 7010-F012, ISO 7010-F013, ISO 7010-F014, ISO 7010-F015
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 4 (continued)
Safety sign F009: Wheeled fire extinguisher
Reference No.
ISO 7010‑F009
Referent
Wheeled fire extinguisher
Function
To indicate the location of a wheeled fire extinguisher
Image content
Bottle on wheeled cart (profile), flame determinant
Hazard
Not being able to locate a wheeled fire extinguisher
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
ISO 7010-F001, ISO 7010-F002, ISO 7010-F003, ISO 7010-F004, ISO 7010-F005, ISO 7010-F006, ISO 7010-F007,
ISO 7010-F008, ISO 7010-F010, ISO 7010-F011, ISO 7010-F012, ISO 7010-F013, ISO 7010-F014, ISO 7010-F015
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 4 (continued)
Safety sign F010: Portable foam applicator unit
Reference No.
ISO 7010‑F010
Referent
Portable foam applicator unit
Function
To indicate the location of a portable foam applicator
unit
Image content
Foam can with goose neck hose terminating with a
venturi nozzle, flame determinant
Hazard
Not being able to locate a portable foam applicator unit
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referentshttp://qstandard.org/
Being aware of the location of a portable foam applicator unit
ISO 7010-F001, ISO 7010-F002, ISO 7010-F003, ISO 7010-F004, ISO 7010-F005, ISO 7010-F006, ISO 7010-F007,
ISO 7010-F008, ISO 7010-F009, ISO 7010-F011, ISO 7010-F012, ISO 7010-F013, ISO 7010-F014, ISO 7010-F015
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 4 (continued)
Safety sign F011: Water fog applicator
Reference No.
ISO 7010‑F011
Referent
Water fog applicator
Function
To indicate the location of a water fog applicator
Image content
90° bend terminating in a nozzle with five non-parallel
segmented lines, flame determinant
Hazard
Not being able to locate a water fog applicator
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
ISO 7010-F001, ISO 7010-F002, ISO 7010-F003, ISO 7010-F004, ISO 7010-F005, ISO 7010-F006, ISO 7010-F007,
ISO 7010-F008, ISO 7010-F009, ISO 7010-F010, ISO 7010-F012, ISO 7010-F013, ISO 7010-F014, ISO 7010-F015
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 4 (continued)
Safety sign F012: Fixed fire extinguishing installation
Reference No.
ISO 7010‑F012
Referent
Fixed fire extinguishing installation
Function
To indicate the location of a fixed fire extinguishing
installation
Image content
Tank (profile) supported on a frame at two points,
flame determinant
Hazard
Not being able to locate a fixed fire extinguishing installation
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referentshttp://qstandard.org/
Being aware of the location of a fixed fire extinguishing installation
ISO 7010-F001, ISO 7010-F002, ISO 7010-F003, ISO 7010-F004, ISO 7010-F005, ISO 7010-F006, ISO 7010-F007,
ISO 7010-F008, ISO 7010-F009, ISO 7010-F010, ISO 7010-F011, ISO 7010-F013, ISO 7010-F014, ISO 7010-F015
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 4 (continued)
Safety sign F013: Fixed fire extinguishing bottle
Reference No.
ISO 7010‑F013
Referent
Fixed fire extinguishing bottle
Function
To indicate the location of a fixed fire extinguishing
bottle
Image content
Bottle (head-on view) supported on its side on a frame
at two points, flame determinant
Hazard
Not being able to locate a fixed fire extinguishing bottle
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
ISO 7010-F001, ISO 7010-F002, ISO 7010-F003, ISO 7010-F004, ISO 7010-F005, ISO 7010-F006, ISO 7010-F007,
ISO 7010-F008, ISO 7010-F009, ISO 7010-F010, ISO 7010-F011, ISO 7010-F012, ISO 7010-F014, ISO 7010-F015
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 4 (continued)
Safety sign F014: Remote release station
Reference No.
ISO 7010‑F014
Referent
Remote release station
Function
To indicate the location of a remote release station
Image content
Bottle with a knob handle on top, flame determinant
Hazard
Not being able to locate a remote release station
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referentshttp://qstandard.org/
Being aware of the location of a remote release station
ISO 7010-F001, ISO 7010-F002, ISO 7010-F003, ISO 7010-F004, ISO 7010-F005, ISO 7010-F006, ISO 7010-F007,
ISO 7010-F008, ISO 7010-F009, ISO 7010-F010, ISO 7010-F011, ISO 7010-F012, ISO 7010-F013, ISO 7010-F015
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 4 (continued)
Safety sign F015: Fire monitor
Reference No.
ISO 7010‑F015
Referent
Fire monitor
Function
To indicate the location of a fire monitor
Image content
Fire monitor (profile), flame determinant
Hazard
Not being able to locate a fire monitor
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
ISO 7010-F001, ISO 7010-F002, ISO 7010-F003, ISO 7010-F004, ISO 7010-F005, ISO 7010-F006, ISO 7010-F007,
ISO 7010-F008, ISO 7010-F009, ISO 7010-F010, ISO 7010-F011, ISO 7010-F012, ISO 7010-F013, ISO 7010-F014
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 5 — Description and application of referent for mandatory action signs (category M)
Reference No.
ISO 7010-M001
Referent
Function
To signify a mandatory action
Image content
Exclamation mark
Hazard
Risk to people not following the mandatory action specified by the supplementary sign
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Carrying out the mandatory action specified by the supplementary sign
Table 5 (continued)
Reference No.
ISO 7010-M002
Referent
Function
To signify that the instruction manual/booklet must be read
Image content
Upper human figure (right-hand profile) holding an open
manual/booklet
Hazard
Not reading the instruction manual/booklet before starting work or before operating equipment or machinery
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Reading the instruction manual/booklet before starting work or before operating equipment or machinery
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
38
92 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 5 (continued)
Reference No.
ISO 7010-M003
Referent
Function
To signify that ear protection must be worn
Image content
Human head (front view) wearing ear protection
Hazard
Noise
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Wearing ear protection
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign exceeded the criteria of acceptability. A supplementary text
sign may be used to increase comprehension. If the safety sign is supplemented by manuals, instructions or training, a
supplementary text sign may not be required.
Table 5 (continued)
Reference No.
ISO 7010-M004
Referent
Function
To signify that eye protection must be used
Image content
Human head (front view) wearing eye protection
Hazard
Flying objects/particles
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Wearing eye protection
Related referents http://qstandard.org/
ISO 7010-M007, ISO 7010-M013
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign exceeded the criteria of acceptability. A supplementary text
sign may be used to increase comprehension. If the safety sign is supplemented by manuals, instructions or training, a
supplementary text sign may not be required.
40
94 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 5 (continued)
Reference No.
ISO 7010-M005
Referent
Function
To signify that an earth terminal must be connected
Image content
Vertical line joining horizontal line with two progressively
shorter parallel horizontal lines underneath
Hazard
Electric shock, explosion, fire
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-W012
http://qstandard.org/
Connecting an earth terminal of a product to the ground
Additional information
This safety sign relates to products employing a class I insulating system which requires protective earthing.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 5 (continued)
Reference No.
ISO 7010-M006
Referent
Function
To signify that the mains plug must be disconnected from
electrical outlet for the purposes of maintenance of
electrical equipment, in the case of malfunction or when left
unattended
Image content
Two fingers and thumb (outlined) holding a two-pin
electrical plug, arrow pointing right, vertical line
Hazard
Electric shock, fire
Human behaviour that is intended to be caused after understanding the safety sign's meaning
42
96 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 5 (continued)
Reference No.
ISO 7010-M007
Referent
Function
To signify that opaque eye protection must be worn
Image content
Human head (front view) wearing opaque eye protection
Hazard
Visible or invisible rays
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Ensuring that the people undergoing treatment by visible or invisible rays are wearing opaque eye protection
Table 5 (continued)
Reference No.
ISO 7010-M008
Referent
Function
To signify that safety footwear must be worn
Image content
Two safety boots, one shown in front, the other shown
behind (outlined)
Hazard
Feet striking or being struck by objects or being in contact with thermal or chemical materials
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Wearing safety footwear
Related referents
—
http://qstandard.org/
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign exceeded the criteria of acceptability. A supplementary text
sign may be used to increase comprehension. If the safety sign is supplemented by manuals, instructions or training, a
supplementary text sign may not be required.
44
98 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 5 (continued)
Reference No.
ISO 7010-M009
Referent
Function
To signify that protective gloves must be worn
Image content
Two protective gloves, one shown in front, the other shown
behind (outlined)
Hazard
Hands striking or being struck by objects or being in contact with thermal or chemical materials
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-M022
http://qstandard.org/
Wearing protective gloves
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign exceeded the criteria of acceptability. A supplementary text
sign may be used to increase comprehension. If the safety sign is supplemented by manuals, instructions or training, a
supplementary text sign may not be required.
Table 5 (continued)
Reference No.
ISO 7010-M010
Referent
Function
To signify that protective clothing must be worn
Image content
Overall (front view)
Hazard
Chemicals, heat or cold
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-M026
http://qstandard.org/
Wearing protective clothing
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
46
100 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 5 (continued)
Reference No.
ISO 7010-M011
Referent
Function
To signify that hands must be washed
Image content
Two hands, one shown in front, the other shown behind
(outlined), three lines of four dots, tap
Hazard
Infection or contamination
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-M022
http://qstandard.org/
Washing hands before starting work task and after finishing work task
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 5 (continued)
Reference No.
ISO 7010-M012
Referent
Use handrail
Function
To signify that the handrail must be used
Image content
Upper human figure with left arm touching diagonal line
Hazard
Falling, slipping or tripping
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Holding the handrail when using stairs, escalators or moving walkways
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
48
102 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 5 (continued)
Reference No.
ISO 7010-M013
Referent
Function
To signify that a face shield must be worn
Image content
Human head (left-hand profile) wearing a face shield
Hazard
Flying objects/particles
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Wearing a face shield
Table 5 (continued)
Reference No.
ISO 7010-M014
Referent
Function
To signify that head protection must be worn
Image content
Human head (left-hand profile) wearing head protection
Hazard
Objects falling on head or head striking objects
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Wearing head protection
Related referents
—
http://qstandard.org/
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign exceeded the criteria of acceptability. A supplementary text
sign may be used to increase comprehension. If the safety sign is supplemented by manuals, instructions or training, a
supplementary text sign may not be required.
50
104 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 5 (continued)
Reference No.
ISO 7010-M015
Referent
Function
To signify that high-visibility clothing must be worn
Image content
Sleeveless jacket (front view) with two vertical and two
horizontal lines
Hazard
Moving vehicles or equipment
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Wearing high-visibility clothing
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 5 (continued)
Reference No.
ISO 7010-M016
Referent
Wear a mask
Function
To signify that a face mask must be worn
Image content
Human head (left-hand profile) wearing a mask
Hazard
Particulates in the air
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Wearing a face mask
Related referents http://qstandard.org/
ISO 7010-M013, ISO 7010-M017
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign exceeded the criteria of acceptability. A supplementary text
sign may be used to increase comprehension. If the safety sign is supplemented by manuals, instructions or training, a
supplementary text sign may not be required.
52
106 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 5 (continued)
Reference No.
ISO 7010-M017
Referent
Function
To signify that respiratory protection must be worn
Image content
Human head (front view) wearing respiratory protection
Hazard
Harmful substances (e.g. noxious gases)
Human behaviour that is intended to be caused after understanding the safety sign's meaning
http://qstandard.org/
Wearing respiratory protection
Related referents
ISO 7010-M016
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign did not reach the criteria of acceptability. Consequently, a
supplementary text sign shall be used to increase comprehension except when the safety sign is supplemented by
manuals, instructions or training.
Table 5 (continued)
Reference No.
ISO 7010-M018
Referent
Function
To signify that a safety harness must be worn
Image content
Human figure wearing a safety harness
Hazard
Falling from a height
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Wearing a safety harness
Related referents
—
http://qstandard.org/
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign did not reach the criteria of acceptability. Consequently, a
supplementary text sign shall be used to increase comprehension except when the safety sign is supplemented by
manuals, instructions or training.
54
108 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 5 (continued)
Reference No.
ISO 7010-M019
Referent
Function
To signify that a welding mask must be worn
Image content
Human head (left-hand profile) wearing a welding mask
Hazard
Hot flying particles, intense light and UV radiation from welding activity
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-M013
http://qstandard.org/
Wearing a welding mask
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign exceeded the criteria of acceptability. A supplementary text
sign may be used to increase comprehension. If the safety sign is supplemented by manuals, instructions or training, a
supplementary text sign may not be required.
Table 5 (continued)
Reference No.
ISO 7010-M020
Referent
Function
To signify that safety belts must be used
Image content
End of belts with a buckle and two arrows pointing to each
other
Hazard
Being projected from the seat of a vehicle or equipment
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Wearing safety belts
Related referents
—
http://qstandard.org/
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
56
110 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 5 (continued)
Reference No.
ISO 7010-M021
Referent
Function
To signify that the machine or the equipment, which is not
connected to mains by a plug, has to be disconnected from
all sources of power before carrying out maintenance or
repair
Image content
Horizontal arrow pointing to the right; one vertical short
thick line attached to a circle at the bottom with a longer
thick line at an angle to the right attached to the top of the
circle; a further thick line in the same plane as the lower
one, separated from the line at an angle
Hazard
Machine or equipment running during maintenance or repair
http://qstandard.org/
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Disconnecting the machine or equipment before carrying out maintenance or repair
Related referents
ISO 7010-M006, ISO 7010-P031
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 5 (continued)
Reference No.
ISO 7010-M022
Referent
Function
To signify that the skin has to be protected with an
appropriate barrier cream
Image content
Human hand, tube, wavy line
Hazard
Damage to the skin
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-M009
http://qstandard.org/
Protecting the skin with barrier cream before starting work or putting on gloves
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
58
112 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 5 (continued)
Reference No.
ISO 7010-M023
Referent
Use footbridge
Function
To signify that a footbridge must be used
Image content
Human figure walking on a footbridge
Hazard
Moving vehicles, obstructions, or tripping or falling
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Using the footbridge to avoid dangerous areas
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 5 (continued)
Reference No.
ISO 7010-M024
Referent
Function
To signify that pedestrians must use a designated walkway
Image content
Human figure walking (left hand)
Hazard
Areas unsafe for pedestrians
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Pedestrians using the designated walkway
Related referents
ISO 7010-P004
Additional information
http://qstandard.org/
Test data obtained according to ISO 9186-1:2007 are available from more than one country. Findings from testing
showed that the safety sign did not reach the criteria of acceptability. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 5 (continued)
Reference No.
ISO 7010-M025
Referent
Function
To signify that opaque eye protection must be worn by
infants
Image content
Infant wearing opaque eye protection
Hazard
Intense light incident on infant's eyes
Human behaviour that is intended to be caused after understanding the safety sign's meaning
radiated area
Related referents
http://qstandard.org/
Ensuring that the infant's eyes are protected before switching the equipment on or before placing the infant into the
ISO 7010-M007
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 5 (continued)
Reference No.
ISO 7010-M026
Referent
Function
To signify that the front of the body must be protected by an
apron
Image content
Human figure with an apron
Hazard
Front of body striking or being struck by objects or coming into contact with substances or materials
Human behaviour that is intended to be caused after understanding the safety sign's meaning
http://qstandard.org/
Protecting the front of the body
Related referents
ISO 7010-M010
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
62
116 © ISO 2011 – All rights reserved
© ISO 2014 – All rights reserved
BS EN ISO 7010:2012+A5:2015
ISO
EN7010:2011/Amd.2:2012(E)
ISO 7010:2012+A5:2015 (E)
Reference No.
ISO 7010-M027
Referent
Check guard
Function
To signify that checks must be conducted to ensure that
guards are in place or used
Image content
Series of horizontal and vertical lines and two interlocking
illustrations of cog wheels
Hazard
Moving machinery
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
http://qstandard.org/
Ensuring that guards are in place before operating the machinery
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 5 (continued)
Safety sign M028: Keep locked
Reference No.
ISO 7010-M028
Referent
Keep locked
Function
To signify that a cabinet or facility must be kept locked
Image content
Padlock with keyhole and four complete chain links and
two pieces
Hazard
Access to harmful substances or equipment
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
—
http://qstandard.org/
Ensuring that cabinets or facilities containing harmful substances or equipment are kept locked
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
SafetyTable 5 (continued)
sign M029: Sound horn
Reference No.
ISO 7010-M029
Referent
Sound horn
Function
To signify that a horn must be sounded
Image content
Horn, three curved lines
Hazard
Collision with another vehicle or with people
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
http://qstandard.org/
Equipment operator or driver sounding horn
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Reference No.
ISO 7010-M030
Referent
Function
To signify that litter must be placed in a litter bin
Image content
Human figure, bin/container and four diamond shapes
Hazard
Material which is harmful or could create a tripping or slipping hazard
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
—
http://qstandard.org/
Putting litter in a bin or container
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign exceeded the criteria of acceptability.
A supplementary sign shall be used to specify the kind of litter to be placed in the litter bin.
Table 5 (continued)
Safety sign M031: Use table saw adjustable guard
Reference No.
ISO 7010-M031
Referent
Use table saw adjustable guard
Function
To signify that the adjustable guard must be used
Image content
Semicircular saw blade with semicircular cover, curved
arrow pointing downwards, single line and block shape
Hazard
Circular saw
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
http://qstandard.org/
Ensuring that the saw is guarded
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table Wear
Safety sign M032: 5 (continued)
anti-static footwear
Reference No.
ISO 7010-M032
Referent
Function
To signify that anti-static footwear must be worn
Image content
End of leg, shoe with lightning bolt on sole
Hazard
Creation of static electricity that can cause sparks leading to fire and explosions
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
ISO 7010-P035
http://qstandard.org/
Wearing anti-static footwear
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
TableClose
Safety sign M033: 5 (continued)
safety bar of chairlift
Reference No.
ISO 7010-M033
Referent
Close safety bar of chairlift
Function
To signify that the safety bar of the chairlift must be
closed
Image content
Human figure, chairlift with safety bar up, curved arrow
pointing downwards
Hazard
Safety bar closed too late
http://qstandard.org/
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Closing the safety bar of a chairlift
Related referents
ISO 7010-M034
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
TableOpen
Safety sign M034: 5 (continued)
safety bar of chairlift
Reference No.
ISO 7010-M034
Referent
Open safety bar of chairlift
Function
To signify that the safety bar of the chairlift must be
opened
Image content
Human figure, chairlift with safety bar down, curved
arrow pointing upwards
Hazard
Safety bar opened too early
http://qstandard.org/
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Opening the safety bar of a chairlift
Related referents
ISO 7010-M033
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Tableleave
Safety sign M035: Immediately 5 (continued)
the tow-track in the event of falling
Reference No.
ISO 7010-M035
Referent
Immediately leave the tow-track
in the event of falling
Function
To signify that the tow-track must be left immediately in
the event of falling
Image content
Human figure on ski, two parallel straight lines, arrow
pointing to the right
Hazard
http://qstandard.org/
Obstruction on the tow-track
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Leaving the tow-track after falling
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
SafetyTable
sign 5M036:
(continued)
Lift ski tips
Reference No.
ISO 7010-M036
Referent
Lift ski tips
Function
To signify that ski tips must be lifted
Image content
Human figure with ski, chairlift, arrow pointing upwards
Hazard
Crashing of the ski tips into technical parts of the cableway
http://qstandard.org/
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Lifting the ski tips
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 5 (continued)
Safety sign M037: Close and secure hatches in launch sequence
Reference No.
ISO 7010‑M037
Referent
Close and secure hatches in launch sequence
Function
To signify that hatches on a lifeboat, fully enclosed
rescue boat or rigid liferaft must be closed and secured
in launch sequence
Image content
Hand around a hatch handle with arrow pointing to
the right above curved arrow pointing in clockwise
direction
Hazard
Uncontrolled flooding, exposure to a hazardous atmosphere, loss of breathable air from the self-contained air
support system, fire and smoke
http://qstandard.org/
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Closing and securing hatches at the appropriate time
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 5 (continued)
Safety sign M038: Start engine in launch sequence
Reference No.
ISO 7010‑M038
Referent
Start engine in launch sequence
Function
To signify that the engine of a lifeboat or rescue boat
must be started in launch sequence
Image content
Handcrank and curved arrow pointing in clockwise
direction
Hazard
No propulsion at the time of need or the engine is started too early in the sequence to launch
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
—
http://qstandard.org/
Starting the engine at the appropriate time
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 5 (continued)
Safety sign M039: Lower lifeboat to the water in launch sequence
Reference No.
ISO 7010‑M039
Referent
Lower lifeboat to the water in launch sequence
Function
To signify that the lifeboat must be lowered in launch
sequence
Image content
Lifeboat on two falls, arrow pointing down, two wavy
lines
Hazard
Lifeboat is not lowered to the water at the appropriate time
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referentshttp://qstandard.org/
Lowering the lifeboat at the appropriate time
Table 5 (continued)
Safety sign M040: Lower liferaft to the water in launch sequence
Reference No.
ISO 7010‑M040
Referent
Lower liferaft to the water in launch sequence
Function
To signify that the liferaft must be lowered in launch
sequence
Image content
Liferaft on single fall, arrow pointing down, two wavy
lines
Hazard
Liferaft is not lowered to the water at the appropriate time
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Table 5 (continued)
Safety sign M041: Lower rescue boat to the water in launch sequence
Reference No.
ISO 7010‑M041
Referent
Lower rescue boat to the water
in launch sequence
Function
To signify that the rescue boat must be lowered in
launch sequence
Image content
Boat on two falls, two upper human figures, one of
them outlined, arrow pointing down, two wavy lines
Hazard
Rescue boat is not lowered to the water at the appropriate time
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
ISO 7010-E037
http://qstandard.org/
Lowering the rescue boat at the appropriate time
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 5 (continued)
Safety sign M042: Release falls in launch sequence
Reference No.
ISO 7010‑M042
Referent
Release falls in launch sequence
Function
To signify that the lifeboat or rescue boat falls must be
released in launch sequence
Image content
Hook on pivot attached to two sloping lines, curved
arrow pointing in anticlockwise direction from a
U-shape
Hazard
Lifeboat or rescue boat release hook is not released from the fall or falls at the appropriate time
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
—
http://qstandard.org/
Releasing falls at the appropriate time
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 5 (continued)
Safety sign M043: Start water spray in launch sequence
Reference No.
ISO 7010‑M043
Referent
Start water spray in launch sequence
Function
To signify that the water spray system for a lifeboat
must be energized in launch sequence
Image content
Nozzle and dotted lines above lifeboat
Hazard
Fire on or near the water surface or hazardous cargo release that may contaminate the outer surface of the
boat
http://qstandard.org/
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Energizing the water spray system at the appropriate time
Related referents
ISO 7010-E036, ISO 7010-M039
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 5 (continued)
Safety sign M044: Start air supply in launch sequence
Reference No.
ISO 7010‑M044
Referent
Start air supply in launch sequence
Function
To signify that the self-contained air support system
must be energized in launch sequence
Image content
Bellows with three arrows at the nozzle pointing away
in a radial pattern
Hazard
Fire and/or hazardous atmosphere that consumes oxygen necessary to sustain life inside the lifeboat and pro-
vide combustion air for the diesel propulsion engine of the lifeboat
http://qstandard.org/
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Energizing the self-contained air support system at the appropriate time
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 5 (continued)
Safety sign M045: Release lifeboat gripes in launch sequence
Reference No.
ISO 7010‑M045
Referent
Release lifeboat gripes in launch sequence
Function
To signify that the lifeboat gripes must be released in
launch sequence
Image content
Lifeboat suspended on a fall in a davit with a gripe sur-
rounding the boat; arrow pointing at the release point
of the gripe
Hazard
Lifeboat remains secured to the cradle and davit and cannot be lowered
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referentshttp://qstandard.org/
Releasing the gripes of a lifeboat at the appropriate time
Table 5 (continued)
Safety sign M046: Secure gas cylinders
Reference No.
ISO 7010‑M046
Referent
Secure gas cylinders
Function
To signify that gas cylinders must be secured
Image content
Upper part of gas cylinder, chain
Hazard
Falling gas cylinder causing crush, explosion or release of gas
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Securing gas cylinders
Related referents
ISO 7010-W029
http://qstandard.org/
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 5 (continued)
Safety sign M047: Use self‑contained breathing appliance
Reference No.
ISO 7010‑M047
Referent
Use self‑contained breathing appliance
Function
To signify that a self-contained breathing appliance
must be used
Image content
Upper human figure (left-hand profile) wearing a com-
pressed air cylinder and mask connected by a tube
Hazard
Harmful gases and lack of oxygen
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
ISO 7010-M017
http://qstandard.org/
Using a self-contained breathing appliance
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 5 (continued)
Safety sign M048: Use gas detector
Reference No.
ISO 7010‑M048
Referent
Use gas detector
Function
To signify that a gas detector must be used
Image content
Front of a block with a small cylinder on top and on the
front plane a curved scale with markers and pointer;
three curved arrows; three lines with several curves
Hazard
Hazardous gases or vapours, explosive atmosphere
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Using a gas detector
Related referents
—
http://qstandard.org/
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 5 (continued)
Safety sign M049: Wear protective roller sport equipment
Reference No.
ISO 7010‑M049
Referent
Wear protective roller sport equipment
Function
To signify that protective roller sport equipment must
be worn
Image content
Human figure wearing head, wrist, palm, knee and
elbow protectors
Hazard
Unprotected body and limb impacts with surfaces and obstacles
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
—
http://qstandard.org/
Wearing protective roller sport equipment when doing roller sport
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Reference No.
ISO 7010-P001
Referent
Function
To signify a prohibited action
Image content
None
Hazard
Risk to people specified by the supplementary sign
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Table 6 (continued)
Reference No.
ISO 7010-P002
Referent
No smoking
Function
To prohibit smoking
Image content
Cigarette (profile, outlined) with two wavy lines
Hazard
Fire or explosion caused by lit cigarettes or other smoking materials or harm from the smoke
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Not smoking
Related referents
ISO 7010-P003
http://qstandard.org/
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
64
© ISO 2014 – All rights reserved 141
© ISO 2011 – All rights reserved
BS EN ISO 7010:2012+A5:2015 BS EN ISO
BS EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
ISO 7010:2011(E)
Table 6 (continued)
Reference No.
ISO 7010-P003
Referent
Function
To prohibit smoking and all forms of open flame
Image content
Match (profile, outlined), flame
Hazard
Fire or explosion caused by an open flame, open ignition source or smoking
Human behaviour that is intended to be caused after understanding the safety sign's meaning
142
© ISO 2011 – All rights reserved 65
© ISO 2014 – All rights reserved
BS EN ISO
BS EN ISO 7010:2012
7010:2012 BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E) EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
Table 6 (continued)
Reference No.
ISO 7010-P004
Referent
No thoroughfare
Function
To prohibit the use of a thoroughfare by pedestrians
Image content
Human figure walking (left hand)
Hazard
Collision with vehicles or machinery
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-M024
http://qstandard.org/
Not using the thoroughfare
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
66
© ISO 2014 – All rights reserved 143
© ISO 2011 – All rights reserved
BS EN ISO 7010:2012+A5:2015 BS EN ISO
BS EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
ISO 7010:2011(E)
Table 6 (continued)
Reference No.
ISO 7010-P005
Referent
Function
To prohibit drinking of unsuitable water
Image content
Tap above glass, two wavy lines
Hazard
Water unsuitable for drinking
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Not drinking the water
Related referents
—
http://qstandard.org/
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
144
© ISO 2011 – All rights reserved 67
© ISO 2014 – All rights reserved
BS EN ISO
BS EN ISO 7010:2012
7010:2012 BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E) EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
Table 6 (continued)
Reference No.
ISO 7010-P006
Referent
Function
To prohibit the use of forklift trucks and other industrial
vehicles
Image content
Forklift truck (left-hand profile) with human figure
Hazard
Moving forklift trucks and other industrial vehicles
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-W014
http://qstandard.org/
Not using forklift trucks and other industrial vehicles
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
68
© ISO 2014 – All rights reserved 145
© ISO 2011 – All rights reserved
BS EN ISO 7010:2012+A5:2015 BS EN ISO
BS EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
ISO 7010:2011(E)
Table 6 (continued)
Reference No.
ISO 7010-P007
Referent
Function
To prohibit people with active implanted cardiac devices
from entering a designated area
Image content
Heart shape and representation of pulse generator
connected by curved line
Hazard
Interference to the operation of or damage to active implanted cardiac devices from equipment generating strong
electromagnetic fields
http://qstandard.org/
Human behaviour that is intended to be caused after understanding the safety sign's meaning
People with active implanted cardiac devices not entering a designated area
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
146
© ISO 2011 – All rights reserved 69
© ISO 2014 – All rights reserved
BS EN ISO
BS EN ISO 7010:2012
7010:2012 BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E) EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
Table 6 (continued)
Reference No.
ISO 7010-P008
Referent
Function
To prohibit metallic articles or watches
Image content
Face and part of strap of an analogue wristwatch, flat side
of a key
Hazard
Strong magnetic fields
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Removing or not wearing metallic articles or watches
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
70
© ISO 2014 – All rights reserved 147
© ISO 2011 – All rights reserved
BS EN ISO 7010:2012+A5:2015
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011/Amd.5:2014(E)
Table 6 (continued)
Safety sign P009: No climbing
Reference No.
ISO 7010‑P009
Referent
No climbing
Function
To prohibit climbing
Image content
Human figure (rear view), 6 horizontal lines between
two vertical lines
Hazard
Object unsafe to climb on and hazardous location/area
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Not climbing
Related referents
—
http://qstandard.org/
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table 6 (continued)
Reference No.
ISO 7010-P010
Referent
Do not touch
Function
To prohibit touching objects/parts of an object
Image content
Hand, horizontal line underneath
Hazard
Dangerous surfaces
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-P015
http://qstandard.org/
Not touching objects or parts of an object
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 6 (continued)
Reference No.
ISO 7010-P011
Referent
Function
To prohibit using water to extinguish a fire
Image content
Bucket, area outlined by wavy line, flame
Hazard
Dangerous reaction from the application of water to a burning substance
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-W021
http://qstandard.org/
Not using water to extinguish a fire
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
72
150 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 6 (continued)
Reference No.
ISO 7010-P012
Referent
No heavy load
Function
To prohibit the placing of heavy objects on a surface
Image content
Weight resting on the two parts of a line which is broken in
the centre so that the two halves are separated and each
inclines downward
Hazard
Breakage due to heavy load
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Not placing any heavy objects on a surface
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
In spite of this, the following needs to be considered:
“Heavy” depends on the context of use and if it needs to be specified, a supplementary sign should be added
stating the maximum permissible load, e.g. as follows: max. 100 kg.
Table 6 (continued)
Reference No.
ISO 7010-P013
Referent
Function
To prohibit activated mobile phones
Image content
Mobile phone (front view), six curved lines
Hazard
Electromagnetic field
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Turning the mobile phone off or not switching it on
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
74
152 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 6 (continued)
Reference No.
ISO 7010-P014
Referent
Function
To prohibit access of people with metallic implants
Image content
Hip joint and socket (outlined) joined by a black hip implant
Hazard
Invisible rays causing a rise in temperature of a metallic implant
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
People with metallic implants not entering a designated area
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 6 (continued)
Reference No.
ISO 7010-P015
Referent
No reaching in
Function
To prohibit people putting hands into openings
Image content
Hand between two converging lines
Hazard
Injury to hands
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-P010
http://qstandard.org/
Not putting hands into designated openings
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
76
154 2014 – All rights reserved
© ISO 2011
BS EN ISO 7010:2012+A5:2015
ISO
EN7010:2011/Amd.1:2012(E)
ISO 7010:2012+A5:2015 (E)
Reference No.
ISO 7010-P016
Referent
Function
To prohibit spraying
Image content
Water hose with nozzle, 5 divergent lines of dots
Hazard
Electric shock, chemical reaction, fire
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
http://qstandard.org/
Not spraying with water on machines and equipment or areas where chemical reactions can occur
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 6 (continued)
Reference No.
ISO 7010-P017
Referent
No pushing
Function
To prohibit pushing against an object
Image content
Horizontal line and vertical block with human figure pushing
against it
Hazard
Objects overbalancing and falling
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Not pushing an object
Related referents
—
http://qstandard.org/
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
156
© ISO 2011 – All rights reserved 77
© ISO 2014 – All rights reserved
BS EN ISO
BS EN ISO 7010:2012
7010:2012 BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E) EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
Table 6 (continued)
Reference No.
ISO 7010-P018
Referent
No sitting
Function
To prohibit sitting on a surface
Image content
Human figure in sitting position, horizontal line
Hazard
Surface unsuitable to sit on
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Not sitting on an unsuitable surface
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
78
© ISO 2014 – All rights reserved 157
© ISO 2011 – All rights reserved
BS EN ISO 7010:2012+A5:2015 BS EN ISO
BS EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
ISO 7010:2011(E)
Table 6 (continued)
Reference No.
ISO 7010-P019
Referent
No stepping on surface
Function
To prohibit stepping onto a surface
Image content
Human figure stepping up, line with right angle
Hazard
Surface unsuitable for stepping onto
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-P024
http://qstandard.org/
Not stepping onto an unsuitable surface
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
158
© ISO 2011 – All rights reserved 79
© ISO 2014 – All rights reserved
BS EN ISO
BS EN ISO 7010:2012
7010:2012 BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E) EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
Table 6 (continued)
Reference No.
ISO 7010-P020
Referent
Function
To prohibit use of lift in the event of fire
Image content
Outline of lift with two human figures standing inside and
flames at the right-hand side of the lift
Hazard
Being trapped in a lift during a fire
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-P027
http://qstandard.org/
Not using lift in the event of fire
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign did not reach the criteria of acceptability. Consequently, a
supplementary text sign shall be used to increase comprehension except when the safety sign is supplemented by
manuals, instructions or training.
80
© ISO 2014 – All rights reserved 159
© ISO 2011 – All rights reserved
BS EN ISO 7010:2012+A5:2015 BS EN ISO
BS EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
ISO 7010:2011(E)
Table 6 (continued)
Reference No.
ISO 7010-P021
Referent
No dogs
Function
To prohibit taking dogs into designated areas
Image content
Dog (right-hand profile)
Hazard
Infections due to dogs; harming of people caused by dog bites
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Not taking dogs into a designated area
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign did not reach the criteria of acceptability. Consequently, a
supplementary text sign shall be used to increase comprehension except when the safety sign is supplemented by
manuals, instructions or training.
160
© ISO 2011 – All rights reserved 81
© ISO 2014 – All rights reserved
BS EN ISO
BS EN ISO 7010:2012
7010:2012 BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E) EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
Table 6 (continued)
Reference No.
ISO 7010-P022
Referent
No eating or drinking
Function
To prohibit eating and drinking
Image content
Three horizontal lines alongside a cup with straw
Hazard
Ingestion of dangerous substances by food and drink contaminated at a designated area
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Not eating or drinking in the designated area
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign did not reach the criteria of acceptability. Consequently, a
supplementary text sign shall be used to increase comprehension except when the safety sign is supplemented by
manuals, instructions or training.
82
© ISO 2014 – All rights reserved 161
© ISO 2011 – All rights reserved
BS EN ISO 7010:2012+A5:2015 BS EN ISO
BS EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
ISO 7010:2011(E)
Table 6 (continued)
Reference No.
ISO 7010-P023
Referent
Do not obstruct
Function
To prohibit the obstruction of a designated clear area
Image content
Crate, horizontal line underneath
Hazard
Obstruction in a designated clear area
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Not placing an obstruction in a designated clear area (e.g. escape routes, emergency exits, passageways)
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
162
© ISO 2011 – All rights reserved 83
© ISO 2014 – All rights reserved
BS EN ISO
BS EN ISO 7010:2012
7010:2012 BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E) EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
Table 6 (continued)
Reference No.
ISO 7010-P024
Referent
Function
To prohibit walking or standing on a designated area
Image content
Two footprints
Hazard
Areas which are unsafe for people to walk or stand on
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-P019
http://qstandard.org/
Keeping off a designated area
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
84
© ISO 2014 – All rights reserved 163
© ISO 2011 – All rights reserved
BS EN ISO
BS EN ISO 7010:2012
7010:2012
BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E)
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
Table 6 (continued)
Reference No.
ISO 7010-P025
Referent
Function
To prohibit the use of scaffolding systems which are not
complete
Image content
Human figure (right-hand profile) walking on a broken
horizontal bar surrounded by vertical and horizontal lines
Hazard
Incomplete scaffold
http://qstandard.org/
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Not using an incomplete scaffold
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are available from more than one country. Findings from testing
showed that the safety sign did not reach the criteria of acceptability. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 6 (continued)
Reference No.
ISO 7010-P026
Referent
Function
To prohibit the use of unsuitable electrical equipment in or
near water
Image content
Shower and bathtub
Hazard
http://qstandard.org/
Electric shock
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Not using electrically powered equipment in bathtubs, showers or water-filled reservoirs
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 6 (continued)
Reference No.
ISO 7010-P027
Referent
Function
To prohibit the use of the lift for the transportation of people
Image content
Human figure (front view) in a rectangle, short arrows
above and underneath the rectangle
Hazard
Goods or freight lifts without the safety features necessary for the transportation of people
http://qstandard.org/
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Not using the lift for the transportation of people
Related referents
ISO 7010-P020
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 6 (continued)
Reference No.
ISO 7010-P028
Referent
Function
To prohibit the use of gloves when operating a machine
with drawing-in hazard
Image content
Two gloves, one outlined, one filled
Hazard
http://qstandard.org/
Drawing-in hazard to people wearing gloves while operating a machine
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Operating a machine with drawing-in hazard without wearing gloves
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 6 (continued)
Reference No.
ISO 7010-P029
Referent
No photography
Function
To prohibit the taking of photographs
Image content
Camera
Hazard
Distraction of drivers, operatives and people working, particularly in dark environments
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Not taking photographs
Related referents
—
http://qstandard.org/
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign exceeded the criteria of acceptability. A supplementary text
sign may be used to increase comprehension. If the safety sign is supplemented by manuals, instructions or training, a
supplementary text sign may not be required.
Table 6 (continued)
Reference No.
ISO 7010-P030
Referent
Function
To prohibit tying knots in a climbing rope
Image content
Climbing rope with a knot
Hazard
Knots in a climbing rope
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Not tying any knots in a climbing rope
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 6 (continued)
Reference No.
ISO 7010-P031
Referent
Function
To prohibit any change of the current energetic or
mechanical state of a machine or equipment
Image content
Switch and two arrows
Hazard
Change of the current energetic or mechanical state of a machine or equipment
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Not switching
Related referents
ISO 7010-M021
http://qstandard.org/
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 6 (continued)
Reference No.
ISO 7010-P032
Referent
Function
To prohibit the use of the grinding disc for face grinding
Image content
Horizontal line with two thicknesses and an angled step;
grinding machine at an angle to the line
Hazard
Breakage of grinding disc due to overstressing leading to flying objects
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Not using the grinding disc for face grinding
Table 6 (continued)
Reference No.
ISO 7010-P033
Referent
Function
To prohibit the use of the grinding disc for wet grinding
Image content
Horizontal line, two circles with random infilling of dots and
outer circle touching line, tap with water drops
Hazard
Breakage of grinding disc due to overstressing leading to flying objects
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Table 6 (continued)
Reference No.
ISO 7010-P034
Referent
Function
To prohibit the use of the grinding disc with a hand-held
grinding machine
Image content
Hand holding a grinding machine
Hazard
Breakage of grinding disc due to overstressing leading to flying objects
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Not using the grinding disc with a hand-held grinding machine
Table
Safety sign P035: Do not6wear
(continued)
metal-studded footwear
Reference No.
ISO 7010-P035
Referent
Do not wear metal-studded footwear
Function
To prohibit the use of metal-studded footwear
Image content
End of leg, shoe with circles on sole
Hazard
Lack of grip between metal-studded footwear and certain floor surfaces
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
http://qstandard.org/
Not wearing metal-studded footwear
Related referents
ISO 7010-M032
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table
Safety sign 6 (continued)
P036: No children allowed
Reference No.
ISO 7010-P036
Referent
No children allowed
Function
To prohibit children from entering a dangerous area
Image content
Small boy and larger girl
Hazard
Areas dangerous to children
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
http://qstandard.org/
Children not entering a dangerous area
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign did not reach the criteria of acceptability. Consequently,
a supplementary text sign shall be used to increase comprehension except when the safety sign is supplemented by
manuals, instructions or training.
TableDo
Safety sign P037: 6 (continued)
not leave the tow-track
Reference No.
ISO 7010-P037
Referent
Do not leave the tow-track
Function
To prohibit leaving the tow-track
Image content
Two parallel curved dashed lines running across two
straight outlined tracks
Hazard
Uneven surface and line supporting structure outside the tow-track, following users of the tow-track
http://qstandard.org/
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Not leaving the tow-track
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Safety signTable
P038:6Do
(continued)
not swing the chair
Reference No.
ISO 7010-P038
Referent
Do not swing the chair
Function
To prohibit swinging the chair
Image content
Two human figures sitting in two chairs, line above,
curved arrow with two arrow heads
Hazard
Chair falling down
http://qstandard.org/
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Not swinging the chair
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 6 (continued)
Safety sign P039: Hot works prohibited
Reference No.
ISO 7010‑P039
Referent
Hot works prohibited
Function
To prohibit hot works
Image content
Hand holding a tool, four lines of different lengths,
each with a star at the end, 5th star, three parallel
wavy lines
Hazard
Fire, explosion
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Not doing hot works
Related referents
—
http://qstandard.org/
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Reference No.
ISO 7010-W001
Referent
Function
To signify a general warning
Image content
Exclamation mark
Hazard
Risk to people specified by the supplementary sign
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Taking care regarding the hazard specified by the supplementary sign
Table 7 (continued)
Reference No.
ISO 7010-W002
Referent
Function
To warn of explosive materials
Image content
Part of filled circle with radiating triangular lines and
irregular shapes
Hazard
Explosion
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Taking care when in the vicinity of or handling explosive materials
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
96
180 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 7 (continued)
Reference No.
ISO 7010-W003
Referent
Function
To warn of radioactive materials or ionizing radiation
Image content
Circle with three circular sectors around it
Hazard
Radioactivity and ionizing radiation
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Taking care to avoid exposure to radioactive material or ionizing radiation
Table 7 (continued)
Reference No.
ISO 7010-W004
Referent
Function
To warn of a laser beam
Image content
Circle with 24 regular equally spaced radiating lines,
12 shorter of equal length, 11 longer of equal length and
one longer reaching horizontally the right-hand side of the
triangle
Hazard
Laser beam
Human behaviour that is intended to be caused after understanding the safety sign's meaning
http://qstandard.org/
Taking care to avoid exposure to a laser beam
Related referents
ISO 7010-W027
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
98
182 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 7 (continued)
Reference No.
ISO 7010-W005
Referent
Function
To warn of non-ionizing radiation
Image content
Circle with three arc-shaped lines of increasing length on
each side symmetrically located, with a trapezoid
underneath
Hazard
Non-ionizing radiation
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Taking care to avoid exposure to non-ionizing radiation
Table 7 (continued)
Reference No.
ISO 7010-W006
Referent
Function
To warn of a magnetic field
Image content
Hoop with two outlined sections at bottom, two arc-shaped
lines on each side of the outlined section
Hazard
Strong magnetic field
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Taking care to avoid exposure to a strong magnetic field
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
100
184 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 7 (continued)
Reference No.
ISO 7010-W007
Referent
Function
To warn of a floor-level obstacle
Image content
Human figure falling forwards, thick horizontal line by
forward leg
Hazard
Floor-level obstacle
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Taking care when in the vicinity of a floor-level obstacle
Table 7 (continued)
Reference No.
ISO 7010-W008
Referent
Function
To warn of a drop
Image content
Human figure falling backwards from the edge of a surface
Hazard
Drop
Human behaviour that is intended to be caused after understanding the safety sign's meaning
102
186 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 7 (continued)
Reference No.
ISO 7010-W009
Referent
Function
To warn of a biological hazard
Image content
Circle overlaid by three equal pincer-shaped circles
Hazard
Virus or toxin
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Taking care to avoid exposure to a biological hazard
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 7 (continued)
Reference No.
ISO 7010-W010
Referent
Function
To warn of low temperature or freezing conditions
Image content
Snowflake
Hazard
Low temperature or freezing conditions
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Taking care to avoid exposure to low temperature or freezing conditions
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
104
188 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 7 (continued)
Reference No.
ISO 7010-W011
Referent
Function
To warn of a slippery surface
Image content
Human figure falling backwards, horizontal line underneath
Hazard
Slippery surface
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Taking care to avoid a slippery surface or being aware of it, taking care to avoid slipping
Table 7 (continued)
Reference No.
ISO 7010-W012
Referent
Warning; Electricity
Function
To warn of electricity
Image content
Lightning bolt
Hazard
Electricity
Human behaviour that is intended to be caused after understanding the safety sign's meaning
106
190 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 7 (continued)
Reference No.
ISO 7010-W013
Referent
Function
To warn of a guard dog
Image content
Head of a dog (left-hand profile) with collar
Hazard
Guard dog
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-P021
http://qstandard.org/
Not entering an area patrolled by a guard dog without ensuring that the dog is under control
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign did not reach the criteria of acceptability. Consequently, a
supplementary text sign shall be used to increase comprehension except when the safety sign is supplemented by manuals,
instructions or training.
Table 7 (continued)
Reference No.
ISO 7010-W014
Referent
Function
To warn of a forklift truck and other industrial vehicles
Image content
Forklift truck (left-hand profile) with human figure
Hazard
Moving forklift trucks and other industrial vehicles
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-P006
http://qstandard.org/
Taking care to avoid collision with moving forklift trucks and other industrial vehicles
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
108
192 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 7 (continued)
Reference No.
ISO 7010-W015
Referent
Function
To warn of an overhead load
Image content
Box suspended at an angle from two ropes attached to a
hook
Hazard
Overhead load
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-W020
http://qstandard.org/
Taking care to avoid being struck by or walking into an overhead load
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign did not reach the criteria of acceptability. Consequently, a
supplementary text sign shall be used to increase comprehension except when the safety sign is supplemented by manuals,
instructions or training.
Table 7 (continued)
Reference No.
ISO 7010-W016
Referent
Function
To warn of toxic material
Image content
Skull (outlined), behind it two crossed bones (outlined)
Hazard
Poisoning
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Taking care to avoid coming into contact with toxic material
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
110
194 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 7 (continued)
Reference No.
ISO 7010-W017
Referent
Function
To warn of a hot surface
Image content
Three parallel, vertical, s-shaped lines above a horizontal
straight line
Hazard
Hot surface
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Taking care to avoid coming into contact with a hot surface
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 7 (continued)
Reference No.
ISO 7010-W018
Referent
Function
To warn of automatic activation
Image content
Circle with three connected curved lines
Hazard
Automatically moving mechanical parts
Human behaviour that is intended to be caused after understanding the safety sign's meaning
unexpectedly
Related referents
http://qstandard.org/
Taking care when in the vicinity of machinery with moving mechanical parts which may start automatically and thus
—
Additional information
The graphical symbol is standardized and registered as ISO 7000-0017 “Automatic control (closed loop)”.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
112
196 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 7 (continued)
Reference No.
ISO 7010-W019
Referent
Warning; Crushing
Function
To warn of moving mechanical parts
Image content
Human figure between two hatched bars; an arrow from the
right side pointing to the right bar and an arrow from the left
side pointing to the left bar
Hazard
Mechanical parts which can come together in a crushing movement
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-W024
http://qstandard.org/
Taking care to avoid mechanisms with parts which can come together in a crushing movement
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 7 (continued)
Reference No.
ISO 7010-W020
Referent
Function
To warn of an overhead obstacle
Image content
Upper human figure underneath an overhead obstacle and
star to indicate contact
Hazard
Overhead obstacle
Human behaviour that is intended to be caused after understanding the safety sign's meaning
114
198 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 7 (continued)
Reference No.
ISO 7010-W021
Referent
Function
To warn of flammable material
Image content
Flame, horizontal line underneath
Hazard
Fire
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Taking care to avoid causing a fire by igniting flammable material
Table 7 (continued)
Reference No.
ISO 7010-W022
Referent
Function
To warn of a sharp element
Image content
Bandaged hand above a vertical line with a point
Hazard
Sharp elements
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Taking care to avoid injury from sharp elements (e.g. needles, blades)
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign did not reach the criteria of acceptability. Consequently, a
supplementary text sign shall be used to increase comprehension except when the safety sign is supplemented by manuals,
instructions or training.
116
200 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 7 (continued)
Reference No.
ISO 7010-W023
Referent
Function
To warn of a corrosive substance
Image content
Hand with indentation, two test tubes, four droplets, thick
line with indentation
Hazard
Corrosive substance
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Taking care when handling corrosive substances
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 7 (continued)
Reference No.
ISO 7010-W024
Referent
Function
To warn of a closing motion of mechanical parts of
equipment
Image content
Hand between two horizontal lines, vertical arrow pointing
downwards
Hazard
Closing mechanical parts of equipment
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
ISO 7010-W019
http://qstandard.org/
Taking care to avoid injury to hands when in the vicinity of equipment with closing mechanical parts
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
118
202 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 7 (continued)
Reference No.
ISO 7010-W025
Referent
Function
To warn of counterrotating rollers
Image content
Small circle with internal curved arrow pointing in anti-
clockwise direction, large circle with internal curved arrow
pointing in clockwise direction
Hazard
Drawing-in movement
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Taking care when in the vicinity of counterrotating rollers
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign did not reach the criteria of acceptability. Consequently, a
supplementary text sign shall be used to increase comprehension except when the safety sign is supplemented by manuals,
instructions or training.
Table 7 (continued)
Reference No.
ISO 7010-W026
Referent
Function
To warn of batteries being charged
Image content
Box with cross and horizontal short line within; two filled
squares directly located on the box above the cross and the
horizontal short line; two curved lines above the filled
square on the left side and irregular curved filled area at the
right side of the box
Hazard
Explosive atmosphere and acid
http://qstandard.org/
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Ensuring adequate ventilation of the charging area and taking care to avoid coming into contact with acid
Related referents
—
Additional information
The graphical symbol is standardized and registered as ISO 7000-1152 “Battery open”.
Test data obtained according to ISO 9186-1:2007 are available from more than one country. Findings from testing showed
that the safety sign did not reach the criteria of acceptability. Consequently, a supplementary text sign shall be used to
increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
120
204 2014 – All rights reserved
© ISO 2011
BS EN ISO
BS7010:2012+A5:2015
BS EN ISO
EN ISO 7010:2012
7010:2012
EN ISO 7010:2012+A5:2015 (E)
ISO 7010:2011(E)
ISO 7010:2011(E)
Table 7 (continued)
Reference No.
ISO 7010-W027
Referent
Function
To warn of optical radiation
Image content
Star with 11 points with circle in centre
Hazard
Optical radiation (such as UV, visible radiation, IR)
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referentshttp://qstandard.org/
Taking care to avoid injury to eyes and skin when in the vicinity of optical radiation
Table 7 (continued)
Reference No.
ISO 7010-W028
Referent
Function
To warn of an oxidizing substance
Image content
Flame, circle, horizontal line
Hazard
Fire
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Taking care when in the vicinity of oxidizing substances
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign exceeded the criteria of acceptability. A supplementary text
sign may be used to increase comprehension. If the safety sign is supplemented by manuals, instructions or training, a
supplementary text sign may not be required.
122
206 2014 – All rights reserved
© ISO 2011
BS EN ISO
ISO 7010:2012
7010:2012
BS7010:2012+A5:2015
EN
BS EN ISO
ISO 7010:2011(E)
ISO 7010:2011(E)
EN ISO 7010:2012+A5:2015 (E)
Table 7 (continued)
Reference No.
ISO 7010-W029
Referent
Function
To warn of a pressurized cylinder
Image content
Cylinder at angle with radiating triangular lines and irregular
shapes, flame and horizontal line underneath
Hazard
Exploding pressurized cylinder
Human behaviour that is intended to be caused after understanding the safety sign's meaning
Related referents
—
http://qstandard.org/
Protecting pressurized cylinders from high temperatures or from being dropped or falling
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be used
to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 7 (continued)
Safety sign W030: Warning; Hand crushing between press brake tool
Reference No.
ISO 7010-W030
Referent
Function
To warn of the closing jaws of a press brake tool
Image content
Press brake tool (punch and die), hand between punch
and die, arrow pointing downwards
Hazard
Closing jaws of a press brake tool
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Table 7 (continued)
Safety sign W031: Warning; Hand crushing between press brake and material
Reference No.
ISO 7010-W031
Referent
Function
To warn of the danger of hands being caught between a
workpiece and the moving parts of a press brake
Image content
Hand crushed between the moving parts of a press
brake and a workpiece, curved arrow pointing upwards
Hazard
Moving press brake and workpiece
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
http://qstandard.org/
Taking care to avoid hands being caught between a workpiece and the moving parts of a press brake
Related referents
ISO 7010-W030, ISO 7010-W032
Additional information
This safety sign is a specific warning sign for hydraulic press brakes.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Referent
Warning; Rapid movement of
workpiece in press brake
Function
To warn of possible movement/deflection of a
workpiece when operating a press brake
Image content
Protruding workpiece, press brake tool (punch and die),
bending press brake operator with damaged head and
shoulder, two curved arrows
Hazard
Movement/deflection of a protruding workpiece in a press brake
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
http://qstandard.org/
Taking care to avoid a protruding workpiece in a press brake
Related referents
ISO 7010-W030, ISO 7010-W031
Additional information
This safety sign is a specific warning sign for press brakes.
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Safety signTable
W033:7 Warning;
(continued)Barbed wire
Reference No.
ISO 7010-W033
Referent
Function
To warn of barbed wire
Image content
Barbed wire
Hazard
Barbed wire
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
http://qstandard.org/
Taking care when in the vicinity of barbed wire
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign did not reach the criteria of acceptability. Consequently,
a supplementary text sign shall be used to increase comprehension except when the safety sign is supplemented by
manuals, instructions or training.
TableW034:
Safety sign 7 (continued)
Warning; Bull
Reference No.
ISO 7010-W034
Referent
Warning; Bull
Function
To warn of bulls
Image content
Bull
Hazard
Bull
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
—
http://qstandard.org/
Taking care when in the vicinity of bulls
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Table 7 (continued)
Safety sign W035: Warning; Falling objects
Reference No.
ISO 7010-W035
Referent
Warning; Falling objects
Function
To warn of falling objects
Image content
Upper human figure, four vertical lines, four different
shapes
Hazard
Falling objects
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
http://qstandard.org/
Taking care when in the vicinity of potential falling objects
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign exceeded the criteria of acceptability. A supplementary text
sign may be used to increase comprehension. If the safety sign is supplemented by manuals, instructions or training, a
supplementary text sign may not be required.
Safety signTable
W036:7 (continued)
Warning; Fragile roof
Reference No.
ISO 7010-W036
Referent
Warning; Fragile roof
Function
To warn of a fragile roof
Image content
Human figure, roof, pattern radiating from one foot
Hazard
Fragile roof
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
http://qstandard.org/
Taking care when on a fragile roof
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available from more than one country. Findings from national
testing, however, showed that in one country the safety sign did not reach the criteria of acceptability. Consequently,
a supplementary text sign shall be used to increase comprehension except when the safety sign is supplemented by
manuals, instructions or training.
Table 7 (continued)
Safety sign W037: Warning; Run over by remote operator controlled machine
Reference No.
ISO 7010‑W037
Referent
Warning; Run over by remote operator controlled
machine
Function
To warn of a run over hazard by a remote operator
controlled machine
Image content
Human figure being run over by wheeled machine with
antenna, three curved lines
Hazard
Moving remote operator controlled machine
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Related referents
—
http://qstandard.org/
Taking care when in the vicinity of a remote operator controlled machine
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
Table
Safety sign W038: 7 (continued)
Warning; Sudden loud noise
Reference No.
ISO 7010-W038
Referent
Warning; Sudden loud noise
Function
To warn of sudden loud noise
Image content
Human head (front view), hand, three curved lines
Hazard
Sudden loud noise
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
http://qstandard.org/
Taking care in areas where there can be sudden loud noise
Related referents
—
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign shall be
used to increase comprehension except when the safety sign is supplemented by manuals, instructions or training.
Bibliography
[1] ISO 3864-2, Graphical symbols — Safety colours and safety signs — Part 2: Design principles for
product safety labels
[2] ISO 7000, Graphical symbols for use on equipment — Index and synopsis
[3] ISO 9186-1:2007, Graphical symbols — Test methods — Part 1: Methods for testing comprehensibility
[4] ISO 9186-2, Graphical symbols — Test methods — Part 2: Method for testing perceptual quality
[5] ISO 16069, Graphical symbols — Safety signs — Safety way guidance systems (SWGS)
[6] ISO 17398, Safety colours and safety signs — Classification, performance and durability of safety
signs
[7] ISO 20712-1, Water safety signs and beach safety flags — Part 1: Specifications for water safety signs
used in workplaces and public areas
http://qstandard.org/
124
© ISO 2014 – All rights reserved 217
© ISO 2011 – All rights reserved
BS EN ISO 7010:2012+A5:2015 BS EN ISO 7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
National Annex NA
(informative)
NA.1.1 General
IMPORTANT — The colours represented in the electronic file of this Standard can be neither viewed
on screen nor printed as true representations. Although the copies of this Standard have been
produced to correspond (with an acceptable tolerance as judged by the naked eye) to the colour
requirements, it is not intended that these printed copies be used for colour matching. Instead,
consult BS ISO 3864-4 which provides colorimetric and photometric properties together with, as a
guideline, references from colour order systems.
The summaries in NA.1.2 and NA.1.3 are provided to facilitate the search for additional BS standardized
safety signs.
Table NA.1 gives the list of referents in alphabetical order and provides the safety sign functional reference
number.
http://qstandard.org/
Referent (safety meaning)
W501.BS
218 125
© ISO 2014 – All rights reserved
BS EN ISO 7010:2012 BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E) EN ISO 7010:2012+A5:2015 (E)
— E is the category for signs indicating an evacuation route, the location of safety equipment or a safety
facility, or a safety action (safe condition signs);
Table NA.2 summarizes the BS registered safety signs in terms of safety sign category in accordance with
BS ISO 3864-1.
Tables NA.3 to NA.7 give safety sign originals in a uniform 70 mm size with corner marks to enable accurate
enlargement and reduction scaling. The sign illustrations are shown without borders in order to allow for
consistent reproduction scaling, though a border can be useful to achieve a luminance contrast between
the safety sign and its background when mounted or displayed. The safety signs should be reproduced
exactly as shown in Tables NA.3 to NA.7
http://qstandard.org/
In cases where the orientation of the symbol is not essential to the meaning of the safety sign, the graphical
symbol may be reproduced in a mirror form. For prohibition signs, it is essential that the prohibition bar
does not obscure significant details of the graphical symbol.
NOTE The graphical symbol is the complete image containing all the graphical symbol elements as shown in the
registered safety sign.
Tables NA.3 to NA.7 present the safety sign originals according to their category as follows:
— E Signs indicating an evacuation route, the location of safety equipment or a see Table NA.3
safety facility, or a safety action (safe condition signs)
Tables NA.3 to NA.7 also give a description of the application for each safety sign.
126
© ISO 2014 – All rights reserved 219
BS EN ISO 7010:2012+A5:2015 BS EN ISO 7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
Category
E F M P W
Evacuation
Safety sign, route, location
reference of safety
number and equipment or Fire equipment Mandatory Prohibition
referent Warning signs
safety facility, signs action signs signs
safety action
(safe condition
signs)
Safety sign —
Reference
E501.BS F501.BS — P501.BS W501.BS
number
Warning; Danger
Hand washing Fire alarm Do not use of death by
Referent —
facility sounder ladder electrocution
from power lines
Safety sign
http://qstandard.org/ — —
Reference
E502.BS — — P502.BS W502.BS
number
Safety sign
— —
Reference
E503.BS — — P503.BS W503.BS
number
Warning;
Do not drink
Referent First aid call point — — RF radiation
alcohol
transmitter
220 127
© ISO 2014 – All rights reserved
BS EN ISO 7010:2012 BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E) EN ISO 7010:2012+A5:2015 (E)
Safety sign
— — —
Reference
— — — P504.BS W504.BS
number
Safety sign
— — — —
Reference
— — — — W505.BS
number
Warning; Kite
flying near
Referent — — — — overhead
Safety sign
— — — —
Reference
— — — — W506.BS
number
128
© ISO 2014 – All rights reserved 221
BS EN ISO 7010:2012+A5:2015 BS EN ISO 7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
Reference No.
E501.BS
Referent
Function
To indicate the location of a hand
washing facility
Image content
Two hands, one shown in front, the other
shown behind (outlined), three lines of
Human behaviour that is intended to be caused by understanding of the meaning of the safety sign
Being aware of the location of a hand washing facility which is provided to assist in the clearance of hand
contamination from substances
Additional information
Test data according to BS ISO 9186-1 is not available for the UK. A supplementary text sign will need to be used
to increase comprehension
222 129
© ISO 2014 – All rights reserved
BS EN ISO 7010:2012 BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E) EN ISO 7010:2012+A5:2015 (E)
Reference No.
E502.BS
Referent
Function
To indicate the location of an emergency
call point.
Image content
Hand (plan view) with one finger
http://qstandard.org/
extended, dot in square (outline) broken
at bottom
Hazard
Not being able to locate an emergency call point
Human behaviour that is intended to be caused by understanding of the meaning of the safety sign
Being aware of the location of an emergency call point
Additional information
Test data according to BS ISO 9186-1 is available for the UK. Findings showed that the safety sign did not reach
the criteria for acceptability. A supplementary text sign will need to be used to increase comprehension.
130
© ISO 2014 – All rights reserved 223
BS EN ISO 7010:2012+A5:2015 BS EN ISO 7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
Reference No.
E503.BS
Referent
Function
To indicate the location of a first aid call
point
Image content
Hand (plan view) with one finger
http://qstandard.org/
extended, dot in square (outline) broken
at bottom, determinant cross
Hazard
Not being able to locate a first aid call point
Human behaviour that is intended to be caused by understanding of the meaning of the safety sign
Being aware of the location of a first aid call point
Additional information
Test data according to BS ISO 9186-1 is available for the UK. Findings showed that the safety sign did not reach
the criteria for acceptability. A supplementary text sign will need to be used to increase comprehension.
224 131
© ISO 2014 – All rights reserved
BS EN ISO 7010:2012 BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E) EN ISO 7010:2012+A5:2015 (E)
Table NA.4 – Description and application of referent for fire equipment signs (category F)
Reference No.
F501.BS
Referent
Function
To indicate a device which emits a fire
warning sound in the event of a fire alarm
Image content
Alarm sounder, three curved lines and
flame determinant
Hazard
http://qstandard.org/
Not being aware of the significance of the warning being given by the device in the even of a fire alarm
Human behaviour that is intended to be caused by understanding of the meaning of the safety sign
Being aware of the location of a fire alarm sounder and recognizing that the use of this device is dedicated to a fire
alarm and evacuation from the premises on hearing the fire warning sound or seeing the associated flashing light
Additional information
Test data according to BS ISO 9186-1 is not available for the UK. A supplementary text sign will need to be used
to increase comprehension.
132
© ISO 2014 – All rights reserved 225
BS EN ISO 7010:2012+A5:2015 BS EN ISO 7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
Table NA.5 – Description and application of referent for mandatory action signs (category M)
NOTE NA.5 has been left blank, in order to remain consistent with BS EN ISO 7010 and to provide a template for
future amendments to the National Annex.
Reference No.
M501.BS
Referent
Function
Image content
Hazard http://qstandard.org/
Human behaviour that is intended to be caused by understanding of the meaning of the safety sign
Additional information
226 133
© ISO 2014 – All rights reserved
BS EN ISO 7010:2012 BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E) EN ISO 7010:2012+A5:2015 (E)
Table NA.6 – Description and application of referent for prohibition signs (category P)
Reference No.
P501.BS
Referent
Function
Image content
Ladder
Hazard
Unsecured ladder
http://qstandard.org/
Human behaviour that is intended to be caused by understanding of the meaning of the safety sign
Not using ladder
Additional information
Test data according to BS ISO 9186-1 is not available for the UK. A supplementary text sign will need to be used
to increase comprehension
134
© ISO 2014 – All rights reserved 227
BS EN ISO 7010:2012+A5:2015 BS EN ISO 7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
Table NA.6 – Description and application of referent for prohibition signs (category P) (continued)
Reference No.
P502.BS
Referent
Function
To prohibit climbing on structures
Image content
Building structure, climbing human figure
Hazard
http://qstandard.org/
Structures not suitable for climbing on
Human behaviour that is intended to be caused by understanding of the meaning of the safety sign
Not climbing on structures
Additional information
Test data according to BS ISO 9186-1 is not available for the UK. A supplementary text sign will need to be used
to increase comprehension
228 135
© ISO 2014 – All rights reserved
BS EN ISO 7010:2012 BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E) EN ISO 7010:2012+A5:2015 (E)
Table NA.6 – Description and application of referent for prohibition signs (category P) (continued)
Reference No.
P503.BS
Referent
Function
To prohibit drinking/consumption of
alcohol
Image content
Beer glass and wine glass
Hazard
http://qstandard.org/
Vehicles, equipment, machinery, watercraft, etc. being driven or operated by someone under the influence of
alcohol
Human behaviour that is intended to be caused by understanding of the meaning of the safety sign
People not to drink alcohol before or when driving vehicles or operating equipment, machinery, watercraft etc.
Additional information
Test data according to BS ISO 9186-1 is not available for the UK. A supplementary text sign will need to be used
to increase comprehension
136
© ISO 2014 – All rights reserved 229
BS EN ISO 7010:2012+A5:2015 BS EN ISO 7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
Table NA.6 – Description and application of referent for prohibition signs (category P) (continued)
Reference No.
P504.BS
Referent
No lighting of fires
Function
To prohibit the lighting of fires
Image content
Flame, four irregular lines
Hazard
Fires
http://qstandard.org/
Human behaviour that is intended to be caused by understanding of the meaning of the safety sign
Not lighting a fire
Additional information
Test data according to BS ISO 9186-1 is not available for the UK. A supplementary text sign will need to be used
to increase comprehension
230 137
© ISO 2014 – All rights reserved
BS EN ISO 7010:2012 BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E) EN ISO 7010:2012+A5:2015 (E)
Table NA.7 – Description and application of referent for warning signs (category W)
Reference No.
W501.BS
Referent
Warning: Danger of
death by electrocution from
power lines
Function
To warn of the hazard of electrical power
lines
Image content
Human figure and lightning bolt
Hazard
Electricity
http://qstandard.org/
Human behaviour that is intended to be caused by understanding of the meaning of the safety sign
Taking care to avoid coming into contact with electricity
Additional information
Test data according to BS ISO 9186-1 has been obtained for the UK. Findings from testing showed that the
graphical symbol did not reach the criteria of acceptability. Consequently, a supplementary text sign will need to be
used to increase comprehension.
Graphical image and referent as described in The Electricity Supply Regulations, as amended [4]
138
© ISO 2014 – All rights reserved 231
BS EN ISO 7010:2012+A5:2015 BS EN ISO 7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
Table NA.7 – Description and application of referent for warning signs (category W) (continued)
Reference No.
W502.BS
Referent
Warning: Heavy
goods lorries
Function
To warn of a hazard from heavy goods
lorries
Image content
Goods lorry
Hazard
Moving goods lorries
http://qstandard.org/
Human behaviour that is intended to be caused by understanding of the meaning of the safety sign
Taking care when in the vicinity of heavy goods lorries
Additional information
Test data according to BS ISO 9186-1 is not available for the UK. A supplementary text sign will need to be used
to increase comprehension
232 139
© ISO 2014 – All rights reserved
BS EN ISO 7010:2012 BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E) EN ISO 7010:2012+A5:2015 (E)
Table NA.7 – Description and application of referent for warning signs (category W) (continued)
Reference No.
W503.BS
Referent
Warning: RF radiation
transmitter
Function
To warn of RF radiation
Image content
Pylon with cross-strutting, two circles,
two rectangles, six curved lines
Hazard
RF radiation http://qstandard.org/
Human behaviour that is intended to be caused by understanding of the meaning of the safety sign
Taking care when in the vicinity of RF radiation transmitters
Additional information
Test data according to BS ISO 9186-1 is not available for the UK. A supplementary text sign will need to be used
to increase comprehension
140
© ISO 2014 – All rights reserved 233
BS EN ISO 7010:2012+A5:2015 BS EN ISO 7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
Table NA.7 – Description and application of referent for warning signs (category W) (continued)
Reference No.
W504.BS
Referent
Function
To warn of the hazard of uneven surfaces
Image content
Human figure, uneven floor surface
Hazard
Uneven floor surfaces
http://qstandard.org/
Human behaviour that is intended to be caused by understanding of the meaning of the safety sign
Taking care when walking on an uneven surface, or taking an alternative route
Additional information
Test data according to BS ISO 9186-1 is not available for the UK. A supplementary text sign will need to be used
to increase comprehension
234 141
© ISO 2014 – All rights reserved
BS EN ISO 7010:2012 BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E) EN ISO 7010:2012+A5:2015 (E)
Table NA.7 – Description and application of referent for warning signs (category W) (continued)
Reference No.
W505.BS
Referent
Function
To warn kite users of the hazard of
overhead electrical power lines present
Image content
Kite, two lines at an angle, lightning bolt
Hazard
http://qstandard.org/
Overhead power lines
Human behaviour that is intended to be caused by understanding of the meaning of the safety sign
Taking care to avoid flying kites in the vicinity of overhead electrical power lines to avoid electric shock
Additional information
Test data according to BS ISO 9186-1 is not available for the UK. A supplementary text sign will need to be used
to increase comprehension
142
© ISO 2014 – All rights reserved 235
BS EN ISO 7010:2012+A5:2015 BS EN ISO 7010:2012
EN ISO 7010:2012+A5:2015 (E) ISO 7010:2011(E)
Table NA.7 – Description and application of referent for warning signs (category W) (continued)
Reference No.
W506.BS
Referent
Warning: Horses
Function
To warn of horses
Image content
Horse
Hazard
Horses
http://qstandard.org/
Human behaviour that is intended to be caused by understanding of the meaning of the safety sign
Taking care when in the vicinity of horses
Additional information
Test data according to BS ISO 9186-1 is not available for the UK. A supplementary text sign will need to be used
to increase comprehension
236 143
© ISO 2014 – All rights reserved
BS EN ISO 7010:2012 BS EN ISO 7010:2012+A5:2015
ISO 7010:2011(E) EN ISO 7010:2012+A5:2015 (E)
Standards publications
[2] BS 5499-10, Code of practice for the use of safety signs, including fire safety signs*
[3] BS ISO 9186-1, Graphical symbols – Test methods Part 1 Methods for testing comprehensibility
* under revision
Other publications
[4] GREAT BRITAIN. The Electricity Supply Regulations 1988 (SI No. 1988/1057), London, The
Stationery Office
http://qstandard.org/
144
© ISO 2014 – All rights reserved 237
http://qstandard.org/
About us Revisions
We bring together business, industry, government, consumers, innovators Our British Standards and other publications are updated by amendment or revision.
and others to shape their combined experience and expertise into standards We continually improve the quality of our products and services to benefit your
-based solutions. business. If you find an inaccuracy or ambiguity within a British Standard or other
The knowledge embodied in our standards has been carefully assembled in BSI publication please inform the Knowledge Centre.
a dependable format and refined through our open consultation process.
Organizations of all sizes and across all sectors choose standards to help Copyright
them achieve their goals. All the data, software and documentation set out in all British Standards and
other BSI publications are the property of and copyrighted by BSI, or some person
Information on standards or entity that owns copyright in the information used (such as the international
We can provide you with the knowledge that your organization needs standardization bodies) and has formally licensed such information to BSI for
to succeed. Find out more about British Standards by visiting our website at commercial publication and use. Except as permitted under the Copyright, Designs
bsigroup.com/standards or contacting our Customer Services team or and Patents Act 1988 no extract may be reproduced, stored in a retrieval system
Knowledge Centre. or transmitted in any form or by any means – electronic, photocopying, recording
or otherwise – without prior written permission from BSI. Details and advice can
Buying standards be obtained from the Copyright & Licensing Department.
http://qstandard.org/
You can buy and download PDF versions of BSI publications, including British
and adopted European and international standards, through our website at Useful Contacts:
bsigroup.com/shop, where hard copies can also be purchased. Customer Services
If you need international and foreign standards from other Standards Development Tel: +44 845 086 9001
Organizations, hard copies can be ordered from our Customer Services team. Email (orders): orders@bsigroup.com
Email (enquiries): cservices@bsigroup.com
Subscriptions
Subscriptions
Our range of subscription services are designed to make using standards
Tel: +44 845 086 9001
easier for you. For further information on our subscription products go to
Email: subscriptions@bsigroup.com
bsigroup.com/subscriptions.
With British Standards Online (BSOL) you’ll have instant access to over 55,000 Knowledge Centre
British and adopted European and international standards from your desktop. Tel: +44 20 8996 7004
It’s available 24/7 and is refreshed daily so you’ll always be up to date. Email: knowledgecentre@bsigroup.com
You can keep in touch with standards developments and receive substantial
Copyright & Licensing
discounts on the purchase price of standards, both in single copy and subscription
format, by becoming a BSI Subscribing Member. Tel: +44 20 8996 7070
Email: copyright@bsigroup.com
PLUS is an updating service exclusive to BSI Subscribing Members. You will
automatically receive the latest hard copy of your standards when they’re
revised or replaced.
To find out more about becoming a BSI Subscribing Member and the benefits
of membership, please visit bsigroup.com/shop.
With a Multi-User Network Licence (MUNL) you are able to host standards
publications on your intranet. Licences can cover as few or as many users as you
wish. With updates supplied as soon as they’re available, you can be sure your
documentation is current. For further information, email bsmusales@bsigroup.com.